Windows 10 Disable Automatic Recovery System. Disable the automatic Windows Recovery Mode. Manual launch of diagnosis

In automatic mode, it usually starts after incorrect completion of the work or the effects of viruses under which critical errors occur. However, it is often possible to observe the situation when "Preparation of automatic recovery" of Windows 10 appears on the screen, and after rebooting, instead of starting the system, only a black screen is visible, or the recovery is simply looped (each other is the same window).

It is sad that, no matter how trying, it is impossible to complete this process. However, if the system itself, not to mention the backup copies, was not damaged to the most extreme extent, when nothing helps, several methods of eliminating such a situation can still be offered.

Preparation of automatic restoration of Windows 10: black screen and causes of the appearance of the process of process.

Be that as it may, despite all the developers claims that new system Is almost the most stable, alas, and it contains many errors that are constantly corrected. And system failures are not always eliminated by the usual rollback.

If speak about possible reasons Such behavior of Windows 10, for sure to say, with which it is linked to such a failure, it is quite difficult. However, with a certain probability, the following can be distinguished:

damage to backup copies;
absence system files;
lack of space to save checkpoints with images;
incorrect settings for the primary BIOS / UEFI system;
problems with hard disk and rapid memory.

Preparation of automatic restoration of Windows 10: What to do first?

To begin with, consider the standard action scheme. In the case when after the notification appears that the preparation of automatic windows restoration 10, after the restart, nothing happens, you can try to use the safe mode for the start.

If the user has activated assignment to call the F8 key start menu, in the standard version you should select a secure mode with the network driver loading. If the use of this key is not provided, it is most often found, it is quite possible that a window will appear at the download stage with an or downloading system, or diagnostic tools (if there are anniversary and creators upgrades.

If the system at least somehow boots, you can try to roll back manually:

To do this, you should not use the standard "Recovery Center", it is better to apply the command console in which rstrui.exe string is entered.
In the rollback window, you must select a point that preceded the emergence of such a situation. Please note that stopping this process will be impossible, as well as cancel changes made in the rollback process.

Sometimes, if network drivers are downloaded, and there is an active Internet connection, you can try to make online recovery using the DISM toolkit. It may very much that such a decision will be much more effective.

Using installation media

If a message appears on the screen again about the preparation of automatic recovery and this process is looped, it is necessary to use for the start installation disk Or a USB media, having previously displayed it first in the Loading Device list in the BIOS.

In the initial window with the installation suggestion, you must select the hyperlink to restore the system in the lower left corner.
Go to the diagnostic section, then apply rollback.

But it is not worth using recovery when loading, since in most cases a message will be issued that the computer in the initial state I could not return.

After selecting a regular recovery, the standard rollback procedure starts. It is possible that this method will give its results.

Expansion of reserved space

Another point when the "Preparation of Automatic Recovery" screen is issued, but then the system does not submit any signs of life, is associated with the fact that you need to increase the disk volume allotted by saving backup copies. Again, it concerns only those situations where Windows can be downloaded to sAFE mode Mode.

In this case optimal option will use a small and fairly simple pARTITION programs Wizard from Minitool or similar development with a built-in loader, which is much more preferable for cases when the system does not start at all. It just needs to increase the required space of at least 250 MB (it is better to install a slightly higher value), after which try to download the system in normal mode.

BIOS / UEFI settings

Finally, the dockey "Preparation of automatic recovery" process of Windows 10 may be related to the settings of the primary system, in which deactivation of the protection system of hacker attacks at the hardware level is involved (prohibits execution of executable codes). The loop appears for this reason.

Thus, to correct the situation, it is necessary:

When you turn on the computer or laptop to enter the above parameters.
Find a string like no-execute Memory Protect or XD-BIT and set for it the value enabled.
After that, you need to save changes (F10) and make a computer device restart.

Hard drives and RAM

If the problem consists in computer "hardware", it may well be that to start it is necessary to check the disk by booting from the removable media using the command line in which the CHKDSK / X / F / R command is prescribed, and at the same time using and checking the main system Components (SFC / Scannow).

If it is possible to make a safe start, the Victoria utilities are perfect for verification (for hard drive) and Memtest + (for random access memory). In some cases, if the hard disk began, as it is called, "refrigerated", as staging, the reclamation program can have invaluable assistance this application Equid, it is difficult to approve, but, judging by the reviews, some hard drives in this way can sometimes restore.

Conclusion

As you can see, remove the constant cyclic appearance of the message that the automatic restoration of Windows 10 is prepared, sometimes possible. True, the system tools in some cases should not be expensive. But if nothing from the above does not help, the system will have to be reinstalled (and in some cases even change the "iron").

In general, if we proceed from purely practical considerations, the first thing is best to try to download with a safe start and perform further actions to at least somehow operating system. But loading S. network drivers It is mandatory.

In the case when this option turns out to be completely inoperable, you will have to load with removable media and try to restore just in this way.

Windows users often encounter the problem of the "blue death screen". What is it? The fact is that damaged system files can lead to the appearance of a critical error that does not allow the computer to start correct operation. In this case, and appears " blue screen" But do not panic! After all, you can eliminate the problem yourself. Let's figure out exactly how.

Causes of the appearance of a blue and black screen

In Windows 10, you may encounter the following error messages: "The computer is launched incorrectly", "the system requires recovery," etc. The reason for their appearance lies in the damaged system files, due to which Windows could not boot.

The system may be damaged due to incorrect actions The user itself introduced changes to the registry or disk files C. or the cause of the breakage can be a virus. Error also sometimes occurs due to incompatibility with third-party drivers or activated fast loading. However, most often the critical error appears due to the interrupted update or incorrectly off the computer. For example, the computer completed the work forcibly, as the power was gone or the voltage jump occurred. The processes and files regulated by them are broken, after which the re-using them becomes impossible.

In case of damage, the system first tries to recover on its own, restarting the computer every time. If after this error is not eliminated, the control is provided to the user. Sometimes it happens that the system freezes and reboots a large number of Once, after which a black screen appears. In this situation, it is necessary to interrupt the procedure and continue the restoration manually.

Video: Danger of "Blue Death Screen" in Windows 10

Automatic system restoration

First, give the computer the ability to independently understand the error. Keep in mind that the automatic recovery procedure can go for more than an hour. In no case are not interrupting it, as this can lead to even more tragic consequences. Go to manual recovery only if the system hung or one of the messages appeared: "The computer is launched incorrectly," it seems, Windows boot incorrectly. "

The appearance of the "blue screen of death" indicates the presence of a critical error in the system

Reboot

This method will suit you if the system issued a message with a choice of two options: "Restart" and "Advanced Parameters". If it is not, you will have to take advantage of other ways.

What should be done:

After receiving a notification, go to the "Advanced Settings" section.
Start the recovery of the system by turning to additional parameters
Select the troubleshooting unit.
Open the "Search and Fault Correction" tab
Select a section with additional parameters.
Select "Advanced Parameters"
Go to the Download Options tab.
Open the Download Settings section
In the list that opens, click "Restart".
Click "Restart"
A list with download parameters will open. Select the 6th option - the command line support mode. Wait until the system restarts and the command line will appear.
Select a reboot with command line support
IN command line Perform successively three commands:
- sFC / SCANNOW;
- dISM / ONLINE / CLEANUP-IMAGE / RESTOREHEALTH;
- shutdown -r.

Execution of commands takes time wait for their completion

Video: How to eliminate "Blue Death Screen" in Windows 10

Deactivation of quick launch

The reason for the impossibility of recovery can be a quick load activated by default. Since in this case there is no access to the system, you will have to deactivate the function via BIOS:

If this method has not worked, go to the next.

Deactivation of automatic recovery

It happens that the system resorts to restoration without reasonable causes by mistake. Therefore, it is worth trying to prohibit it calling the recovery procedure by following these steps:

When the message appears, go to the optional parameters and call the command line.
In the "Advanced Settings" menu, open the command prompt.
Using the bcdedit command, find the ResumeObject string and copy its value.
Run the bcdedit command to go to the dispatcher windows downloads
Run the bcdedit / set (x) recoveryenabled command, where X is a previously copied string enclosed in curly brackets. After that, exit the command prompt by the EXIT command.
Run BCDedit / Set (X) RecoveryEnabled to disable automatic recovery

Ready! Now try downloading the system.

Manual launch of diagnosis

Going to the command prompt using the method described in the "Deactivation of Automatic Recovery" or "Reboot", follow these commands:

cHKDSK / R C:;
sFC / SCANNOW.

Run the CHKDSK / R C; SFC / SCANNOW command

These commands scan system files and correct the errors found. After executing them, write an exit to exit the command line and check whether the problem disappeared.

Manual system restoration

If none of the described methods helped eliminate the problem, you will have to return the system to the operating state manually. There are several ways to make it.

Point of recovery

This method is good because your data (photos, music, archives and other files) will not be deleted or changed. System settings, updates and driver versions roll up to the state in which they were at the time of creating a recovery point. If it was not automatically created or manually in advance, then use the method will not succeed.

Perform the following steps:

After that, the procedure for rollback will begin, which can last about an hour. Do not interrupt it - it will lead to big problems. As a result of rollback, system files are regenerated, so that errors should not occur.

Reset to factory settings

This method allows you to reset all system settings, installed programs and created tasks, and at the same time save the user's personal data stored in the system section. This method Replaces the reinstalling system, allowing you to accomplish it much faster.

Perform the following:

A rollback procedure will start, which can last more than an hour. Do not interrupt it, otherwise the system will damn so much that direct reinstallation cannot be avoided. At one of the stages, you will ask, whether to save personal data or not. If you select the option "Do not save", you can get absolutely clean Windows 10.

Select, save your personal data or not

Manual entry in the recovery menu

For manual login, the recovery menu will require a recovery medium. The installation flash card that has at least 8 GB of memory will be used as it.

To create an installation media, follow the instructions:

Insert the flash card into the working computer, find its icon in the explorer, click on it right key and select the "Format" function. Consider creating a carrier in any windows versionBut the Format Function is present only in Windows 10. In previous systems, you will have to use a third-party program, for example, USB Disk Storage Format Tool. Formatting format - FAT32.
Before forming a flash card, select File Format systems FAT.32
After the format is completed, go to the Microsoft website to the Windows download page and download the installation program.
Go to the Microsoft website and download the system installer
Run the downloaded program. Note that you want to update another device.
Select "Create installation media"
When you are asked to choose the characteristics of the recorded system, specify that the data that coincides with the characteristic system in need of restoration.
Specify the characteristics of the system you want to restore
Specify which media is worth using, and wait for the record. Ready, installation media created.
Specify the media - flash card or disk
After the operation is completed, run the flash card on the non-working computer. To do this, enter the BIOS (how to do this, described in the first step of the point "Deactivation quickly launch») And change the load order so that the connected media dismissed hDD from the first place.
Set the installation media for first place.
Exit BIOS and wait for the installation window appears. Go through the first step of selecting the language, and on the second interrupt the installation procedure by pressing the "system restoration".
Click "System Restore" in the second step of installing Windows

By completing these actions, you will find yourself in the recovery menu and you can use all the instructions described above.

System image generation

If you have another computer with the same windows characteristics 10, as on a non-working computer, you can burn the image of the system. Thus, you will create a recovery point and you can use the correction method above. windows errors Using the recovery point.

To generate a system image, do these steps:

In the Control Panel menu, go to the "File Story" section.
Click "Creating a System Image"
Select a recording medium and confirm the action. After the procedure is completed, you will have a flash card with a backup. Use it to restore the damaged system.
Specify the media to which the system image will be recorded.

The appearance of a blue or black screen with an error informs the presence of a collection or damaged files in the system. You can fix the problem using the automatic system restore parameters. If it does not work, use one of the ways. manual recovery. Follow the instructions from the article and you will definitely work out!

- this is a function that, for example, in unstable work operating system After installing some kind of program or driver, allows restore Windows to the previous state. The "System Restore" function needs to return to previous settings, restore system files to the previous state without affecting the user files.

System recovery function Regularly creates recovery pointswhich subsequently can be used to repair an unstable operating system. Recovery points can be created manually. This mechanism is not used for reserve copy Personal user files, therefore, cannot be used to recover for example, deleted files.

After shutdown system recovery mechanismAll recovery points will be removed, and you will not be able to restore the system to the previous state. In operating systems Microsoft Windows. The system restore is enabled by default to disable it or change its parameters, follow these steps.

Disable Windows XP Recovery

In the window Properties of the system Click the Restore System tab.
To select the checkbox Disable system recovery.
If you want to enable the system restore function again, perform the previous steps and uncheck the checkbox. Disable system recovery.

Disable Windows Vista Recovery

Click Start → Control Panel → System and its maintenance And select Team System..
In the left area, click on the "System Protection" button.
To disable system protection for each hard disk, Remove checkboxes from Chekboxes, and then click OK.

Disabling Windows 7 Recovery

Right-click on the My Computer icon and select Properties.
In the left area, click the System Protection button and go to the tab. System protection.
To disable the system recovery function, select the disk on which you want to disable the system recovery, and click Tune.
In the next window, select the Checkbox Disable system protection and click OK.

Council: The system recovery function does not work in the case of the FAT file system, FAT 16 and FAT 32, as they do not support copying in background mode. To use the system recovery, the NTFS file system is required. To create a system recovery points, an additional disk space is required.

If you have serious problems that do not allow Windows to boot normally, the built-in master usually proposes to recover. However, if the error occurs during the recovery itself, the process can focus, and the system will start recovery with each new load. Sure, reinstalling Windows Decides the problem, but you will lose all installed programs. Well, if you take care of the creation of full backup Systems, and if there is no such copy?

However, this is not a sentence. You can try to "knock out" the system from the recovery cycle using this instruction. All you need is the installation disk with Windows and a little attention. Installing B. BIOS Download From an external medium, insert the disk and boot from it. The Windows Setup menu appears.

Follow the BCDEDIT command in the current console.

As a result, you will receive a list of boot options. In the first block "Windows Load", find the ResumeObject string and copy the identifier located opposite it.

Now execute the BCDEDITIT / SET (GUID) command RecoveryEnabled No, putting into place (GUID) your identifier.

In this way automatic recovery It will be turned off and the cycle will be interrupted. Deactivation of the recovery procedure, however, does not eliminate its errors. Therefore, it is quite advisable to check file Systemby performing on the command line cHKDSK / R C:.

And if it does not give positive results, you can execute the command sFC / SCANNOW.aimed at restoring damaged system files.

You can also enable the download manager called as in Windows 7 by pressing F8 immediately after turning on the computer. To do this, in the running console, you must execute the BCDedit / Set (Default) command BootMenupolicy Legacy.

If all this does not help run Windows, most likely, you will have to go to the radical options - reinstall or reset the system to the original state.

Tent modification of operational windows systems, as well as some previous versions, not insured against critical failures. The developers naturally provided funds in it to restore its performance. For Windows 10, recovery can be carried out by several methods, which can be called universal today. In addition to the two of all the proposed methods, which will be discussed, such techniques can be applied with equal success for other systems.

Automatic restoration of Windows 10 during critical failures

As in previous systems, the tenth version provides the use of an automated tool.

Although it is not visually visited, as, for example, in Windows 7, when the automatic recovery window occurs when a critical failure, the automatic recovery window occurs, however, it also works, but only in the background. You can experience his work exclusively by increased system loading time.

Windows 10: restoration in the standard way

For standard recovery You can use the "Control Panel" section, in which the recovery string is first selected, and then start.

The system will check the files necessary for this process, after which system dates will be issued to which you can roll back. If the required recovery point of Windows 10 is missing in the list, it must be deployed using other points for this.

Why are they hidden? Yes, just because by default, the system shows only those dates and time when important or critical updates were installed. After selecting the point corresponding to the state of the system to certain date and time, it remains only to confirm its actions, and after the reboot wait for the completion of the process.

Note: Custom files created later than the point to which rollback is performed, will not be affected, but the installed programs will be deleted. To find out how recovery will affect user applications, you can use the viewing string of the affected programs before starting the rollback.

Similar actions in some cases, it is recommended to make when installing special options Downloads in the recovery menu of the parameter partition. After activating this item, you will need to select first diagnostics, then - extra options, Then - restoring the system. Next, the available recommended image of Windows 10 restore will be specified, which can be used to roll back. But you can choose from another from the list, the display of which can be caused by the activation of the corresponding string.

Reset to factory settings

In Windows 10, recovery provides for the use of a very interesting possibility of resetting settings to factory (by type of how it is done on smartphones). The tool is indispensable when constant problems are observed in the system, and rollback standard method Does not help.

To activate this process, use the parameters section called from the "Start" menu, in which the update and security menu is selected. In the Located list, the Recovery section is used. On the right side of the window on top short description Process, and below is the button "Start". By clicking on it, the user and activates the start of the rollback.

Upon completion of the recovery on a computer terminal or laptop, the user will receive a "clean" system in this form, as if it had just been installed (during the reset process, you can save user files).

Return to the previous system

Another one useful tool You can call the Windows 10 restoration after Windows 8 or 7, when the tenth version was installed as an update, but for some reason I didn't like the user, and he decided to return to last modification.

To do this, in the same menu of the parameter section, the return point to the previous OS is selected, after which the start of the process is activated. Upon completion of all actions, the computer will remain exactly the OS, which was before (with all files, programs and settings).

However, there is a number of conditions, without complying with such actions will be impossible. First, it is possible to return to the original OS only for 30 days and only on the condition that the files old system Removed were not. Secondly, if the tenth version was produced "net" installation (even if without formatting system partition), nothing will come.

Creating a loading flash drive

It goes without saying that when critical failures for Windows 10, recovery can be made by booting from removable media to which the download and configuration files are recorded.

To begin with, consider the creation of the system boot flash drive without use third-party programs. To do this, use the recovery partition located in the "Control Panel" (in the Parameters section of this function), where the creation of the recovery disk is selected. Immediately it is worth paying attention to the system file copying string. If there is a check box, you will need a USB carrier with a volume of at least 8 GB. Otherwise, 512 MB will be enough.

When choosing one of the options, the system will prepare the necessary configuration files And they will record them on a USB drive, after formatting it. After that, it will only be left to boot from the flash drive when you re-start, setting it by the first boot device in the BIOS settings.

In principle, much more simple method The creation of a bootable USB drive is the use of third-party programs. One of these is RUFUS. In its settings you do not need to change anything, except to install a tick opposite the creation boot media And specify the path to the predetermined image of the ISO system.

Creating a boot disk

As for optical media, create a Windows 10 recovery disk in just the described section will not work.

In this case, the "Control Panel" should use the backup and recovery section. Here on the left, either the creation of a recovery disk is selected or creating a system image.

In the first case, it will be a boot optical media that will be created when you start from which you can restore Windows 10, while using the corresponding partition. Actions are very similar to those that apply when choosing special download options.

In the second case, when creating an image, there may be quite a lot of space on the hard disk or on removable media, depending on the size of all installed programs and user files, not to mention the image of the system itself. The same DVDs will have to buy with a dozen and more. Therefore, this option is not considered because of its extreme inconvenience. Although if the volume of the hard drive allows, you can save a copy in a logical section other than the system, and then when booting from a removable medium, specify the system its location.

Installation disk

An equally effective tool is the use of an installation disk, which can be created from the finished image using programs like Ultraiso or Daemon Tools.. However, as practice shows, if you have an active Internet connection, the easiest to use special utilities from Microsoft: Media Creation Tool. or Windows Update. Assistant, which can be downloaded for free from the official resource of the Corporation.

When starting from such a carrier (naturally, when installing it in bIOS parameters As the first boot device) after selecting the language and parameters regional standards In a new window, use a reduction reference reference, located in the lower left corner. After that, several available action options will be shown (return to the original status and additional parameters where the actions described when using special download options).

Looping loader

Finally, the largest stumbling block is to restore Windows 10 boot, when all of the above-mentioned means of the positive effect are not allowed.

In this case, the download must be made from removable media, and instead of standard tools, use the command console, which, after starting from the disk or flash drive, is called by the SHIFT + F10 combination. Windows 10 boot recovery is reduced to two options. In the first case, you can restore the boot record, in the second - to completely rewrite it.

Windows 10 bootload recovery in the console should be started with a disk diagnostics that is activated team Chkdsk. C: / F / R (checking the disk with automatic error correction), and then bootrec.exe / fixmboot and bootrec.exe / fixboot are prescribed.

If, after their execution, the start of the system in normal mode is impossible, the BootRec.exe / RebuildBCD command is used. But it is triggered guaranteed.

Additional means

Finally, in Windows 10, the system restore can be applied and using additional tool The history of files, which, as such, does not have a direct relationship, but may be an effective means in combination with other methods.

This tool is even before possible failures In the system you need to activate. This is done in the parameters section, where the update and security menu is first selected, and then in the archiving service after adding the device, the backup function is turned on. Next, you can specify a schedule, as well as specify only those files and folders that are subject to preservation. Thus, even if the system roll back to the factory state, the user will not work to restore its own files of the latest stored versions.

Conclusion

That's all with regard to system rollback. In principle, all methods are good. If for some reason some of them do not work (now the calculation is not taken to the factory settings and rollback to the previous OS), they can be applied by running the start of the system in safe modewhich can be enabled either in the download parameters (msconfig) or in the Special Start Options section. But for recovery boot records No other option, except to use the command console, today is not. It remains to add that exclusively the means of the system itself were considered and programs were not affected. third-party developerswhich allow you to produce similar procedures.