Win 7 Reset Settings. Instructions for returning a laptop to factory settings. Return the computer to the original state

Auto reset Windows To the state, "from the store" (Factory Reset) - a good alternative to the installation operating system from scratch. This in many cases simplifies the life of the user, as it eliminates the need to reinstall its hands. And it is a pity that this feature is not on each device, but only on those where the system is installed by the manufacturer. It is almost 90% of all laptops, monoblocks and branded desktop assemblies.

In what cases will be useful to reset windows 7 to factory settings:

if you decide to sell a computer - condition hard diskAs just from the store, there will be a buyer only "on hand";
in enterprises - in the case of computer transfer to use another employee;
if the operating system suffered from a serious failure, which fails to eliminate anything, except for a complete reinstallation;
after a long use and multiple installation-reinstallation of programs, the system began to work slowly - due to sense of registry and system directories;
Windows 7 stopped being downloaded after installing the new driver - reset to the factory settings will restore the obviously working drivers that were initially stood.
Windows 7 for unknown reasons "FILLED" - the reset function will help solve the problem if the problem is not associated with the failure of the hard disk.

Hidden Recovery Section: Where is he?

Why does the reset function to the factory state available not to all? The fact is that on computers where it is, hDD It is posted in a special way: it has a hidden recovery partition (which otherwise is called the service partition) where Windows 7 copies are stored with all drivers and branded software. This section is created by the PC Manufacturer and it takes about 15-20 GB. disk space (here, where free space disappears!). It is not displayed in the explorer, but visible through the "Disk Management" snap. Let's see if you have this partition.

Open the Control Panel \u003e\u003e Applet Administration \u003e\u003e Computer Management.

Or in the context menu of the folder "Computer", click "Management".

On the right side of the window, in the list of administration parameters, there is a "Disk Management" item. Click it.

Among other volumes, we see that the most hidden partition under the name of samsung_rec (shown on the example of the laptop of this brand). It does not have the letters and from under the operating system the user is not available. To look at it (but we do not advise you to do this without necessary), you need to upload a computer from an external carrier on windows database Or another OS, go to "Disk Management" and assign him a letter. Then he, like the rest, will be visible in the conductor.

If this section is present on your system disc, you have the opportunity to reset Windows 7 to the original state. If not, it means there.

How to reset the system

Some manufacturers equip their technique from branded utilities that allow you to start the reset process directly from under the running Windows. But this will not bring the benefit to those who do not boot. Therefore, almost every laptop, a monoblock or branded desktop is equipped with a rollback tool that can be run from the recovery environment or by pressing a specific key at the time.

Here is the list of some of them for devices of the most common brands:

ASUS - F9.
Acer - Alt + F10 (but you first need to go to the BIOS and activate in it the D2D Recovery parameter in it (Disk-to-Disk Recovery))
Dell Inspiron - Ctrl + F11
Dell XPS - F8
Lenovo ThinkPad - F11
Lenovo IdeaPad - Special Key "Onekey Rescue"
Fujitsu Siemens - F8
Toshiba - F8 or 0
Sony VAIO - F10 or "Assist" key
Packard Bell - F10
HP Pavilion - F11
LG - F11
Rover - Alt (hold)
SAMSUNG - F4.

Preparation

Important! Before resetting Windows 7, transfer to another drive all the data important for you that are stored on the hard disk. And not only from system partition, and from all. On some devices, for example, the TOSHIBA brand, the recovery procedure to the factory settings is accompanied by a disk by removing information in all sections. It will restore it after that it will be not easy, but it is impossible at all.

Also, make sure that the laptop battery is not discharged, otherwise the sudden turning off of electricity can make a lot of trouble. Stationary computer and monoblock Connect at this time to a uninterruptible power source.

Roll back with hot keys

Pressing the above key launches the recovery wizard. In some cases (be careful, not in all!) It will be prompted to make a backup copy of your data. Before you skip this item, make sure that it has already been created.

The instructions of the wizard are translated into Russian, so there should be no difficulties with its use. Just do not forget that the beginning of the recovery process cannot be canceled and you will definitely have to bring it to the end. On average, it takes 10-15 minutes.

After the completion of the procedure you will see the screen initial setting Windows 7. Further - the creation of the first account, activation, etc., is done in the same way as after the usual installation of the system.

Rollback using the Windows utility

Consider the launch of the recovery utility on the Packard Bell laptop, where it is built directly into the Windows shell.

Open the control panel and run the Appelet "Archiving and Recovery".

Click Restore System Settings or Computer.

Click "Advanced Recovery Methods".

Select "Return a computer to a status specified by the manufacturer."

Rollback from the recovery environment

Another way to reset Windows is to run a rollback wizard from the recovery environment (Windows Re). To get to it, click F8 after the start of the PC and select from the "Troubleshooting Computer" from the opened menu.

After loading the Environment re Select the interface language,

user account (password may require),

This option will help to return the system to the state recorded at a certain point in time, the recovery point. If saving such points is configured and enabled, then before installing updates, drivers and applications, the system status will be recorded on the hard disk.

Returning Windows to the recovery point will save all personal files, but drivers and applications that appeared after creating a point will need to reinstall.

To start restoring Windows, right-click on the "Start" (Win + X) and go to the control panel → "System and Safety" → System → "System Protection". Click "Restore" → "Next" and select the desired recovery point.

Another path option: "Control Panel" → "All control panel elements" → "Restore" → "Running system recovery".

If the recovery point is not, it means that the system protection is disabled, and you will have to use other ways.

To avoid trouble in the future, enable the creation of recovery points. To do this, in the same menu "System Protection" select system Disk, Click "Configure" and turn on the system disk protection.

2. Return the computer to the original state.

If there is no recovery points or the transition to them does not help, try to return the system in the initial state. You can roll back to saving files or delete everything completely. Also in some computers - more often it is laptops - there is an option to restore factory settings.

In Windows 8 and 10, start the recovery of the original state, by going to the "Parameters" → "Update and Security" section → "Return the computer to the original state" → "Start".

In Windows 7, for this you need to go to "Control Panel" → "System and Security" → "Archiving and Restore" → "Restore System Settings or Computer" → "Advanced Recovery Methods" → "Return a computer to a status specified by the manufacturer."

3. Restore Windows using a disk

The recovery disk is useful, for example, to roll back to the saved point or return to its original state if Windows refuses. An ordinary flash drive is suitable for the role of such a disk, an outer hard disk or DVD.

The recovery disc should be recorded in advance and stored in case of a system failure. In the "Control Panel" section → "All control panel" → "Recovery" click "Creating a recovery disk". In the menu that appears, select "Run backup system files to the recovery disk "and you can use a USB drive not only to correct errors and rollback, but also for reinstalling Windows.

You can create a DVD to restore Windows in the section "Control Panel" → "System and Security" → "Archiving and Recovery" → "Create a system recovery disk". The same method works in newer versions of the system, only the name is different: " Backup and recovery (Windows 7) "instead of" archiving and recovery ".

To correct errors, download the system from the disk. In the recovery environment, click Troubleshooting. Run the return to the system recovery point in the menu " Extra options»→" System Restore ".

4. Restore Windows using the full image image

Another option windows restoration - Speak to the system created earlier. The image is written to the hard disk, on DVDs or in the network section.

Unlike rollback to source or recovery from the point, the use of a full image saves all files, applications, settings and drivers installed at the time of its creation.

The most suitable moment to create such an image may be the state when everything and applications necessaryBut there is nothing superfluous. So you can continue the work immediately after recovery.

To create a complete image image in the "Control Panel", select "Backup and Restore (Windows 7)" → "Creating a System Image". (In Windows 7: "Control Panel" → "System and Security" → "Archiving and Restore" → "Creating a System Image".)

In the menu that appears, you can choose from the existing partitions and files to include in the image image and which carrier it is written.

Having at the disposal the full image of the system, you can quickly return Windows to the state you need. You can start recovery based on the image when restarting the computer: "Diagnostics" → "Advanced parameters" → "Restoring the image image".

The system recovery point returns your computer at that time when it worked correctly, without losing documents or other personal files. Notes.

www.dell.com.

Restoring, reset to factory settings or reinstalling Windows 7 on Dell Computer

The system recovery point returns your computer at that time when it worked correctly, without losing documents or other personal files.

Note. Any program installed after the selected recovery point will be lost and will have to reinstall.

View this video or follow these steps. Dell for 99 seconds. Restoration of the system from Windows 7 (1:47) (in English).

Load your computer in the usual way.
Open the control panel. To do this, click Start and select Control Panel.
Click System and Security and select System.
In the main control panel window, select System Protection.
Note. If the User Account Management window opens, click Yes.
Click Restore System.
The default item recommended recovery is selected. From this option, it is best to start, as it corresponds to the most recent recovery point.
To select another recovery point, click Select another recovery point, click Next and click on the recovery point.
Click Next and then click Finish to confirm the recovery point.
To start the recovery process, click Yes.
After the system recovery is completed, a computer is rebooted.

Notes.

If recovery to the most recent recovery point does not help eliminate the problem or cannot be executed, select the next recovery point.
If you recover no one recovery point helps to eliminate problems, no recovery can be executed or there are no points, open the tab Using the built-in Dell Recovery Recovery section in the Windows 7 section does not start correctly or does not start at all, as you need to perform other actions.

www.dell.com.

How to reset Windows 7 to factory settings

Hello. I am sure that most of you turned out to be in an unpleasant situation when OS gave a failure, it began to restart on their own. This can happen by different reasons: damage to system files, virus impacts or technical malfunction "gland". One way to troubleshoot is reset windows systems 7 to the factory settings, which will be discussed in this article.

Recovery methods

It is not necessary to be a computer genius to do the steps described below. It is enough to follow the instructions, and then you will get everything.

There are three most effective way to solve the problem. Now I will tell you about them in more detail.

Loading a good configuration

The easiest way to help you return the system in a working condition in a few minutes.

You must first restart the PC and click F8 during startup to display the download menu:

Select the "Last Successful Configuration" section;
Windov will try to restore damaged files And set default settings, followed by restart.

It is worth noting that for laptops of different manufacturers, the input keys to the discharge may differ. Often, it is F8, but maybe F9-F12. On Lenovo, you can sometimes find a special button "One Key Rescue", clicking on which the "rescue" menu will open.

Immediately note that the above method is able to solve minor problems associated with defective drivers or parameter failures. You need to start with it, and if it does not help, then go to the next instruction.

Windows restoration

I think you know that the system independently creates a rollback point before installing applications or updating drivers. Thus, the working condition is recorded to which then you could return.

You can create such points and in manual modeWhen using the next built-in utility:

In the starting line "Start" I enter the request "Restore" and select the option from the results:

You can go on another way: in the "Control Panel" go to the "System" section. A window will open, where the left should click on the link "System Protection". Display the window with the "Create ..." button:

When specifying the name (description) of the point, getting taking "OK" and wait for the end of the process of creating a backup.
Ready! Now, to perform recovery, you follow in the "Control Panel" to select the appropriate section, and then from the proposed options, go to the "Run ..." point:

"Master" starts, which will step by step by all procedure. Initially, you should select the point from the list to which you want to return. The default last saved configuration is selected.
In the end, it will be proposed to continue the process after restarting the PC. It remains only hopes that the solution will be efficient. Alas, not always the restoration of the system is activated, so you may not find a rollback point:

So you have to resort to the most radical and relatively difficult solution.

Use the boot disk

I already talked about this procedure on the example of Windows 10. But the reset of Windows 7 to the factory settings is slightly different. Therefore, keep the instruction for the "seven".

This method is the most efficient if the system is deeply amazed by viruses, not loaded at all or constantly issues failures (blue screen).

In the BIOS settings, select the method of booting from removable media (flash drive, DVD) on which the image is recorded. Of course, it was previously necessary to create (or ask for acquaintances). How it is done I showed in a separate publication.
When the window is loaded with the "Install" button, do not hurry to press it. Below is the link "Restoration ...", which we need:

Next will be offered several options. It is necessary to click on the item indicating the image:

Now just follow the instructions "Masters". You just need to press "Next" several times, and then wait for the end of the procedure.

Total reset

There is another way that is relevant for laptops having reserved section With the papers of the OS and the factory settings. Almost every respected manufacturer of laptops equips its products with this opportunity.

Give detailed instructions for this method I can't, because for different models She will be different. But, often there is a special button with an image of an arrow pointing to a point or something similar. Or, when you start the recovery menu (see above), an additional point can be displayed, indicating the brand. Here is an example for Toshiba:

Just run the branded utility and carefully read what it offers. If there are questions, it is better to ask the "GoogleDex" or write to us by mail or in the social network. We will try to help figure out the situation.

Source: IT-Tehnik.ru.

eService.od.ua.

Windows 10 includes the "Computer Reset" option, with which you can quickly restore Windows to the factory default configuration. This option is much faster and more convenient than reinstalling Windows "from scratch" or using the recovery partition created by your PC manufacturer. In Windows 8, there were separate options "PC Update" and "Reset PC Parameters". Updates are stored all your files and settings, but set the default PC settings and delete desktop applications. Reset removes everything, including your files, as well as makes Windows Resintall from scratch.

In Windows 10, things are a little simpler. The only option is to "return the computer to the original state", but during the process, you can choose whether to save personal files or not.

How to return the computer to the original status if you decide to use the "Reset this PC" function, Windows will completely reset to factory default settings. If you purchased a computer already with the Windows 10 installed, your computer will be in the same state with which you bought it. All manufacturers of installed software and drivers that came from the PC will be reinstalled. If you installed Windows 10 independently, it will be a clean Windows 10 OS without different additional programs.

You have a choice - you can save your personal files or delete them completely. But, all your erases will also be software installed and settings. This ensures that you will have a fresh system. By resetting the computer, any problems associated with third-party software, corruption should be solved. file System, settings of the change system, or malicious programs.

If the purchased computer has a pre-installed Windows operating system, you can also see the third option, "Restore Factory Settings". This will allow you to restore original versionwhich came with your PC, so if your computer came from Windows 8, and you switched to Windows 10, it will be reset back to Windows 8.

This process is very similar to reinstalling Windows from scratch or using the recovery provided by the manufacturer, but is more convenient.

Microsoft explained that actually happens when you reset your computer and delete everything:

The computer is loaded into Windows Recovery Wednesday, in the Windows Property Recovery Environment Recovery and formats sections of Windowsbefore installing new copy Windows.Computer will reboot to the new a copy of Windows. When you choose to save your files, the same actions are performed. But, before removing the partition, the Windows Recovery Wednesday re-scans the hard drive for your files and personal settings. He places them aside, sets a new copy of Windows, and puts them there, where they were found.

How to return the computer to the original state in Windows to return the PC to the factory settings in Windows 10, simply open the setup application and go to Update and Security\u003e Restore. Press the "Start" key in the "Return the computer to the original state" section.

In Windows 8, go to change the parameters of the computer\u003e Update and Recovery\u003e Restore to find the equivalent of the options "Update PC" and "Return the computer to the original state".

You can choose either "save my files" or "Delete everything". If you select "Save My Files", Windows will be reset to the default state, with removal installed applications And settings, but save your personal files. If you select "Delete All", Windows will erase everything, including your personal files.

If you just want a fresh Windows system, select "Save My Files" to restore Windows without deleting your personal files. You must use the option "Delete everything" when you sell a computer or give it to someone else, so it will be better to erase your personal data and install PCs in factory condition default. In any case, this a good idea, To have backups yours important files Before using this feature.

In Windows 8, the Save "My Files" option was called "PC Update", and the "Delete All" option was called "Return the computer to the original state." For Windows 10, these things are simplified, this process is called "computer reboot" and asks a question - what you want to do with your files.

If you decide to delete everything, then Windows will ask if you want to "clear the discs too." Select "Delete Files and Clear Disk" and Windows will copy data to disk to remote files Could not be restored. This is the perfect option to use it when you sell or give a computer (or hard drive).

How to return the computer to the original state in the download menu

If your PC with Windows does not boot, you can reset it from the download parameter menu. We reviewed several ways to access this menu. But, in the same menu, it will appear automatically if Windows cannot boot.

Select Troubleshooting\u003e Return the computer to the original state to return the computer through the menu.

How to get a fresh Windows 10 operating system without blocking

Option "Reset this computer" is convenient, but there is one a big problem With this: if your PC manufacturer has installed many unnecessary programs that you do not want to install, then the computer reset will return all this junk back.

Fortunately, with an update in the Windows 10 operating system, there is an easy way to get fresh from Microsoft Windows 10 system. Just click on "Find out how to start with clean installation Windows "- Link to Settings\u003e Update and Security\u003e Recovery Screen.

"PC New Start" Download Tool image of windows 10 straight from Microsoft and install it on your system, giving you a fresh microsoft system with any of the software that has been installed at the factory. Equipment drivers must be loaded automatically from the center windows updates After you finish. If you need a hardware driver or a program that is not automatically installed from the Windows Update Center, you will find them on the manufacturer's website of your PC.

Windows 8 allows you to create custom updates. Whenever you perform update or reset your PC, it will use your own images instead of standard. For example, you can remove viruses that came with your PC, establish an important software, or change the system settings, and then create a refresh image with the current system status. But, this option is missing in Windows 10, but at least in Windows 8 it was a good consolation prize.

If the manufacturer of your computer saved on it installed windows data 7, you must act as follows: Open the control panel and go to the "System and Security" category.

In the "Archiving and Recovery" section, find the "Restore system parameters or Computer" item. Then click on "Advanced Recovery Methods", select the "Computer Return to initial settings"And follow the instructions.

However, if you come across the "Reinstall Windows (required installation disk Windows) "You need to reset Windows 7 using recovery methods.

After starting the computer, during the boot process, pay attention to the indication at the bottom of the screen that by pressing the function key you can go to the recovery mode. In most cases, these buttons are or otherwise you should try other function keys.

On some laptops to appeal to function keys You must press the key in the lower left corner of the keyboard. If you did not have time to click on the desired key, you need to repeat the boot process.

After your computer boot in recovery mode, use the arrow keys to select the Restore Point. Since you have already saved the data, you can go to next stepby clicking "Next".

Now Windows will prompt you to disable all input devices, such as the keyboard and mouse. After confirmation with the "Next" button, disconnect peripherals. The reset process begins, which may take a few minutes.

Photo: Company-producer

Restore the factory settings of the laptop may be required in many situations, the most common of them - any interfering work of Windows fails, "Blindness" system unnecessary programs and components, with the result that the laptop slows down, the same method can be solved and a lot of other problems or prepare a laptop for sale - relatively quickly and simple.

In this article, consider in detail how the factory settings on the laptop are restored, as usual happens and when it may not work. Individual detailed instructions For Dell laptops: for Lenovo laptops :.

In order to restore the factory settings for ASUS laptops, there are convenient and simple recovery utility on the computers of this brand. Here step-by-step instruction By applying it:

Disable fast loading (BOOT BOOSTER) in BIOS - this feature Accelerates the download of the computer and is enabled in the default ASUS laptops. To do this, turn on your laptop and immediately after starting the download, press F2, with the result that you will have to get into bIOS settingswhere the function is turned off. Using the arrows, go to the BOOT tab, select "Boot Booster", press Enter and select "Disabled". Navigate to the last tab, select "Save Changes and Exit". The laptop will automatically reboot. Turn it off after that.
In order to restore laptop asus To the factory settings, turn it on and press the F9 key, you will need to see the download screen.
The recovery program will prepare the files necessary for the operation, after which a request will appear about whether you really want to produce it. All your data will be deleted.
After that, the process of restoring and reinstalling Windows is automatically, without user intervention.
During the recovery process, the computer will reboot several times.

Factory HP Laptop Settings

To restore the factory settings on the HP laptop, turn it off and disconnect all the flash drives from it, remove the memory cards and so on.

Turn on the laptop and press the F11 key until the HP-Recovery Manager laptop is displayed. (You can also run this utility in Windows, finding it in the list of installed programs).
Select System Recovery (System Recovery)
You will be offered to save the desired data, you can do it.
After that, the process of restoring factory settings will go to automatic modeThe computer can reboot several times.

Upon completion of the restoration program, you will receive a HP laptop with a Windows installed, all drivers and HP brand programs.

Factory Tincture Laptop Acer

In order to restore the factory settings on Acer laptops, turn off the computer. Then turn it on again by holding the ALT and pressing the F10 key for about once every second. The system will ask for a password. If you have never done the recovery of factory settings on this laptop, then standard password - 000000 (six zeros). Select the Factory Reset to the factory settings that appears.

In addition, you can return the factory settings to laptop Acer. And from the Windows operating system - find the Erecovery Management Utility in the Acer programs and use the Restore tab in this utility.

SAMSUNG laptop factory settings

In order to reset the Samsung laptop to the factory settings, run the Samsung Recovery Solution utility in Windows, or if it has been removed or Windows does not load, press the F4 key when the computer is turned on, the recovery utility will start sAMSUNG laptop to factory settings. Next, follow these steps:

Select Restore (Restore)
Select "Complete Restore" (Complete Restore)
Select COMPUTER INITIAL STATUS recovery point (factory tincture)
Answer a request to reboot a computer "Yes", after reboot, follow all the instructions of the system.

After the laptop is fully brought to the factory status and you will enter Windows, you need to perform another reboot to activate all the recovery program of the settings.

Reset Toshiba laptop on factory settings

In order to run the factory recovery utility on Toshiba laptops, turn off the computer, after which:

Press and hold the 0 (zero) button on the keyboard (not on digital block on right)
Turn on the laptop
Release the 0 key when the computer starts to squeak.

After that, the program will be launched to restore the laptop to the factory settings, follow its instructions.