Updated: 02.05.2017 Published: 2016 or earlier

Description

Windows is not loaded or loaded for a very long time and writes "Failed to configure Windows Updates Cancel Changes. Do not turn off the computer. "

Cause

During the installation of updates, a critical error occurred, which the system should fix. Since Windows does not know exactly what update has led to the problem, it makes the abolition of all the fixes that were installed last time. If there are many of them, the system will boot for a long time, which will create a feeling of hung upload.

The main reasons for the incorrect installation of updates is an unexpected power off or an internal correction code error.

Decision

Step 1 - Go to Windows:

We wait for the system boot. It will happen sooner or later (sometimes, waiting will have to 12 hours).

If you want to wait for the opportunity:

1. We load the system in safe mode - it does not always help, since Windows can also start rollback updates.
2. Run Windows Restore from the installation disk - it will be necessary to work on the command prompt.

Step 2.1 - If you managed to wait for the system loading or run it in safe mode:

Press the right mouse button A computer - Properties - Windows Update Center - Settings.

In the window that opens in the section Important updates Choose Search for updates, but the decision to download and install is accepted by me:

and click OK..

Now open Windows and turn off Windows Update Center:

Go to the folder C: \\ Windows \\ SoftWaredistrationTribution \\ DOWNLOAD And delete everything in it.

* Most often, the system disk - C, but it is not always the case. Consider this remark and replace the letter if necessary.

Step 2.2 - If you run Windows Restore from the disk:

Select the command prompt as a recovery tool.

Follow the following commands:

\u003e Ren C: \\ Windows \\ Softwaredistribution \\ DOWNLOAD C: \\ Windows \\ SoftWaredistribution \\ Download.old

* This command renamed the download folder in Download.old, thereby makes the downloaded updates for the system inaccessible.

\u003e SC Config Wuauserv Start \u003d Disabled

* Disconnect the Windows Automatic Update Service.

Step 3 - Run Windows in Normally:

After the settings made in step 2, reboot your computer. It may turn out that the system will again start kickback updates. In this case, you will have to wait for the end of the procedure and restart the computer again.

Now turn on the update service and manually install Windows Corrections. But we will not install all packages at a time, since it is precisely this leads to problems. Select several updates, wait for their installation and reboot the computer. So as long as all fixes are installed.

Of course, the update of the Windows operating system - in most cases - the case is useful and even necessary.

However, sometimes downloading /, hanging or full system failure.

So, often the situation occurs when, with a long waiting for the completion of the installation process, a notification that says is unexpectedly appears: "Failed to configure Windows updates. Cancel changes. Do not turn off the computer. "

And here the most interesting begins: because the process of canceling changes can occur infinitely long in the literal sense of the word. It is possible to wait and 5, and 10 and 24 hours, but the process will remain at one stage of the "rotating pointer".

Why does a computer writes "failed to configure Windows updates": reasons and ways to solve the problem

So, the reasons for this, to gently say, an unblend situation: for example, forced / incorrectly turning off the computer during the update process, an involuntary reboot, unstable operation of the Internet connection, user intervention (or viruses) in system files etc.

That is, the system somehow arose problems with downloading Windows 7 update files and their subsequent installation.

Based on this, and we will consider possible troubleshooting options.

What if the computer (laptop) is hung, and on the System Message with the text about problems with Windows Update Settings?

Method number 1.

It is the most effective among well-known options.

So, it is necessary to troubleshoot the problem:

• In the explorer, go along the way - "C: \\ Windows \\ SoftWaredistRibution \\ Download";
• In this folder, all downloaded system update files are displayed that you just need to highlight and delete;
• Next restart the computer.

Further steps will depend on the selected update installation scenario:

Most users at this stage prefer to simply disable all updates and set up "Do not check availability".

Among professional administrators, this question has long been a discussion and ambiguous. In turn, we advise you to set the "Search for updates, but a decision on downloading and installing is accepted by me," which will allow to prevent uncomfortable updates, but be aware of what system offers.

Accordingly, they are marked as "important" and "optional".

• If you open the "Important" section, you will be provided with a list of available updates with their detailed description, including: name, file size, publishing date, and description for what are intended and what problems are solved.

All options for you are ticking and click "OK".

Return to the previous section and click the Install Updates button.

Method number 2.

The second option also involves working with the "Download folder" folder, only lies not to delete files, and in renaming the folder itself - in order to make a "invisible" semblance and prevent the installation of updates.

To implement it, do the following:

"Ren C: \\ Windows \\ Softwaredistribution \\ download download.old", to rename the "download" folder and restart the computer.

Alternatively (in the presence of a boot image of an operating system on any carrier), you can go to the "System Restore" section, as the "Command Line" to select and execute the command mentioned above.

Conclusion

In conclusion, it is worth noting that there are many additional options for solving the problem with the inability to set up Windows update, but the feasibility of their application depends on the causes of this error.

For example, sometimes users help cleaning the registry with the program "CCLEANER" or system rollback to an earlier condition.

Unfortunately, it is absolutely guaranteed that the methods described above will help - it is impossible: in this case, a banal reinstalling of the operating system can correct the situation.

For the sake of justice, it should be noted that recently the incidence of this error has decreased significantly. Perhaps this is due to the fact that Microsoft pays a significant part of their attention to Windows 10, and about the old-kind Windows 7 is gradually forgotten, and not so zealo support its new updates, which is undoubtedly pleased with many fans of this operating system.

You will also be interested, and how to get rid of it in the shortest possible time.

As mentioned above, Windows updates are installed automatically (if other options are not provided). Therefore, when the computer is turned off, the inscription "Do not turn off the computer periodically appears. Update ", or similar wording. As a rule, after a few minutes the process stops, and the device turns off. Updates take effect on the next download.

However, in the latest versions of Windows, obviously, some changes occurred, as a result of which the process of installing updates is delayed by 5 or more hours. Another form problem is a cyclic update of Windows, in which the installation process, in fact, does not stop when it is turned on, nor when the computer is turned off. Anyway, such problems block custom processes, and therefore, require an operational elimination.

2. problem solving options

2.1. Reinstalling Windows

The easiest way to restore the stable operation of the OS is its reinstallation. You can perform it using a boot disk or flash drive. The main disadvantage of this method is the loss of data. When Windows is reinstalled, formatting occurs, as a result of which the entire information stored on the computer is deleted without the possibility of recovery.

2.2. Return (rollback) by the time the latest update (backup)

In order to avoid unforeseen situations, the OS provides for a backup. That is, you can perform "rollback" by the time the last update point. To do this, when loading, select a secure mode (manually or key F8), the "Restore" function and the most preferred recovery point. As a rule, such an operation helps to work with constant updating Windows, but there is a risk that the problem is repeated.

2.3. Appeal to the service center

This option is preferable in several cases:

• the recovery point was not updated too long ago or was not created at all;
• the user has no installation disk or flash drive;
• data stored on the computer must be saved.

As a rule, the procedure for restoring stable operation OS takes a little more than half an hour and, contrary to popular opinion, does not require significant financial costs.

This problem is not something over natural and not solvable. You can solve any problem. First of all, you need to understand the cause of the system problems. In order to solve the consequences of "breakdowns". There are two main reasons.

The first of the main reasons for almost all users is banal forgetfulness.

Users often forget about the automatic update of the system and when downloading the update is simply turned off the computer. What leads to the error of the system. Also with non-authorized power outage.

The second reason is the most common, it is using pirated content.

By downloading Microsoft service updates, code identification occurs. For example, check the license of the Windows system. What leads to this problem.

Practical actions to solve the problem!

method first.

If, when you start Windows_7 or windows_xp, the principle of operation in systems is almost the same, when you try to install updates, the system writes that "failed to configure Windows updates" and "Cancel changes". In this case, a reboot occurs and the system again starts to update Windows. So it can happen to infinity. It is necessary to make the following actions:

It is necessary to restart the computer, or as in our cases wait for the reboot. Or press the "Reset" button. On the laptop hold the button on.

During the BIOS boot, you must press the "F-8" key. The system loading menu is discovered.

From the list, select "Safe Mode" and wait for the system loading.

In safe mode, most system services are disabled. Therefore, this method allows you to disable the update download system. On the desktop we go to the Start menu.

Click "Computer".

Select "Local disk (s)". If the letter of the disk on which the system is installed is different, then select your local disk.

After that, we go on the next way:

C: / Windows / SoftWaredRibution / Download /

The "download" folder contains Microsoft update files for Windows.

In Pak, you need to delete downloaded update files. Select the files by date and time that have been downloaded during the last update. If it is difficult for you. Select all the files and folders using the mouse and delete. After you delete restart the system and try turning on the system update.

If you have a Pirate Windows Content, it is recommended to disable the system update in the system settings. In order to protect yourself from such problems.

The method of the second.

If the first case for some reason did not work. You can restore the system with the help of the backup recovery point of the system. We do almost the same.

When loading the system, click "F-8". Select the item "Safe Mode with Command Line Support". Press "ENTER". In the command prompt, enter the following command "msconfig", press "ENTER". You fall into the "System Configuration" window

Select the service "Service" at the top of the window. In the window that opens, select "Restoring a computer system to one of the previous states"

The "Restore System" window opens. Click "Next".

Confirm the recovery point. Press "ready."

After that, you need to confirm the recovery notification. Click "Yes." After completing the system recovery. Try to re-update the system or in the settings disable the update.

the third way.

If the two previous ways did not help you. And how did not bring you about resolving the problem. You need to do the following. As you probably remembered.

Reboot your computer. During the load, click "F-8". In the download lists, select "Catalog Services Recovery Mode".

Important: Disconnect the Internet.

After the procedure performed, the system should turn on. After the procedure, the system should turn on. Go to the "Start" menu. In the "control panel".

In the "control panel". If your control panel looks different, change the format in the "View" category in the upper right corner.

Come to the Windows Update Center. In the subseated window, on the left side, select "Settings of the parameters".

In the settings, remove all ticks.

Also changing "Install automatically (recommended) to the" Do not check the availability of updates (not recommended) ". After that, try to restart the computer.

If this article helped you solve your problem. So you did not have in vain.

Good day, friends! All certainly know that updating software products, you not only expand the ability to update the program, but also improve the security of the computer as a whole. Sometimes, with this procedure, different situations arise, so I decided to affect the topic, why Windows 7 updates are not installed. The reasons when the update does not start in Windows 7, maybe not so much.

In this article I will try as briefly and accessible to you about everything. With the other versions of Windows, the same is the same, with the exception of some subtleties (for example, in XP "Windows Update Center" opens a little differently). However, I think it is insignificant, so I went!

Microsoft utility problem diagnostics

We try to resume the process manually! For this, as the first option, you can try to download from the official site of Microsoft to troubleshoot the Windows update center. To download the utilities, we need to go to the official website, link.

Now you need to click on the image with a little man who keeps the key in the hands, to download this program.

After installing it on your computer. Put the checkbox "accept", now click "Next".

When the utility is established, you can try to update Windows 7. That is, as you understand, no more interference from the user is required, since the program does everything in automatic mode.

Check the system settings

If the method above does not help you, then proceed to setting up Windows to update without any additional downloads. To do this, we do this path: "Start" - "Control Panel" - "System and Security".

Next, click "Windows Update". On the left side of the screen there is an inscription: "Search for updates", click on this item. Wait a bit, after which the button "Set now" will appear on the right, to which as you understand should be pressed to begin to install them.

Many requests

If you still failed the problem, then close all windows that relate to the Windows update center and try to attempt in minutes 20. In the meantime, you can read the article further.

You can also wait when the schedule is updated. If it is not configured, then do it now. To do this, click on the left "Settings".

Put the ticks everywhere and select "Install updates automatically (recommended)". Specify the time convenient for you when you need to download and install updates.

Do not forget to click "OK" to apply the above-described actions.

Proxy server.

It is possible that you are trying to download updates via the Internet at work. But Admins closing the ports for which updates are downloaded, this task puts in a dead end.

To check it, you can take a computer or laptop home and try to do it through your Internet. If you have a computer, then there is no point in carrying this mahuin, then approach the admin and talk about the situation that has arisen. Tell us about what measures you undertake him to understand that his help is now extremely necessary.

Protection and viruses

Do you have a firewall or antivirus installed? Then before the update you must have all software related to security - disable. It is possible that they block the link with Microsoft servers.

Viruses can be a reason when updates are not installed for Windows 7. To check your computer to viruses, download the free utility or. These programs do not require installation and intuitive in circulation. If any viruses are found, then you can safely remove them.

If there is a firewall, then add an exception rule for these sites:

http: //*.update.microsoft.com.
https: //*.update.microsoft.com.
http://download.windowsuppdate.com.

If errors appeared when updating

If you have errors when updating Windows, then this tool will be just by the way. To download Fix, go. By the way, on the same page, after they tell about how this utility works, there are also some recommendations that concern my article.

As the last time you click on the image with a little man, download the utility and install it on your computer. How to download and how to install the program, you can see visually slightly above, but I think you remember everything.

Small problems

If you still have a question why Windows 7 updates are not installed, it remained unresolved, check the free disk space. As if trite and stupid, it did not sound, but in my practice there was such a case when the disk with: was completely scored, and the user still wanted and loaded it with updates for Windows 7.

By the way, that the system worked stably, on the disk from: you should have a free space for 3-5 GB. A little distracted, but this is a really important point for users.

Do you have unlicensed windows? Do you use a pirate version? Then this problem may be associated with illegal software. If you are in this situation, then just forget about any updates.

Of course, to download updates, you must have the Internet. Check if you have interrupted the Internet connection. You can also close all the programs, even those that do not belong to the Internet.

So I listed all the major problems in the system that could prevent Windows update. I sincerely hope that you have found a solution that has corrected the situation.