Mouse does not work on PC. Why does not work mouse on a laptop or mouse? How to temporarily solve the problem with the mouse

The wireless mouse performs absolutely the same functions as the usual wired, but it allows the user not to be confused in the wires when working at a computer or laptop. True, this is a modern and convenient device can sometimes fail and maintain itself. Why it may not work a wireless mouse and how to cope with a similar situation - we will study in more detail.

Note!An attempt by independent home treatment of such complex equipment can very negatively affect her well-being. Do not carry out such risky experiments - trust the care of the health of the computer and its components, employees of a specialized service center.

Causes of problems in the work of a wireless mouse

The cursor on the monitor remains in the same place and in no way reacts in any way on the movement of the mouse or pressing its keys? If the batteries in the device workers and the mouse itself are included, the causes of such an incident, according to experts, may be several:

Problems in workUSB-port.It is through this connector that most peripheral devices are connected to computers, laptops and other techniques. Wireless mice are no exception (a special receiver is inserted into the USB port). If there are some damage or contaminants in this connector or the southern bridge has failed, the controller responsible for the operation of all ports, then, of course, any movements and commands of the mouse will be ignored.
Outdated drivers or their absence.It is often quite often how specialists noted, difficulties with the work of the mouse arise as a result of this reason. It is possible to eliminate it or independently, after checking their presence in the settings of the computer, or by contacting the computer master.
Fault of the peripheral device.Sometimes the problem may hide in the body of the mouse itself. Make sure of your suspicions just enough - connect it to any other computer or laptop and check its performance. The cursor also froze and you do not obey? The withdrawal is clear - the wireless mouse itself needs in diagnosis and treatment.

We are accustomed to interacting with Windows OS using a mechanical manipulator, simply, mice.

The mouse allows you to almost not use the keyboard, because using the mouse you can:

manage system processes;
produce almost any system operations;
perform the context menu functions.

But what if the mouse suddenly stopped working? How to be if the manipulator does not respond to the team, twitching, does not make the action we need?

Mouse does not work: what to do

Physical malfunctions

1. You need to check through which connector the mouse is connected to the system unit. It can be a round input PS / 2. In this case, the connector is better not to connect when the computer works, otherwise the closure can happen.

2. If OS does not "sees" the mouse, you need to turn off the computer without its help. To enter the "Start" menu, we use the Ctrl + Esc combination or the WIN button. "Down Arrow" and Enter Select "Shutdown", click the "OK" button.

3. Often the reason lies in the disappearance of the contact. To check this, disconnect the mouse and connect again. Now turn on the computer. If everything works, the problem is solved.

4. If the mouse is connected via USB port, you can connect it without turning off the computer. If the reconnection did not help, it is better to turn off the system unit, and then try another USB input. It happens that the mouse does not connect through another connector, then you need to connect it to some working PC and test.

In the case when one hundred percent working computer is "sees", perhaps the connector broke on your PC or there was a problem with software. To check the operation of the connectors and inputs, you must connect to the PC other running mice (it is better to check both inputs - PS / 2 and USB).

Software errors

If all procedures with connectors and inlets, as well as other physical parameters do not help, then it is probably in the software. Enter the control panel. For this:

Press Win key, and then "directions arrow", Tab and ENTER, in the Start menu, find the "Control Panel" menu.
Next, locate the "System and Security" icon, - Tab "Equipment and Sound".
Select "Device Manager".
Through the Device Manager, expand the "Mouse and Other Indicating Devices" list.
Then turn on the SHIFT + F10 menu.
Then "Delete".
Restart the computer (below we presented this process in screenshots).

When you turn on the system will re-send drivers to the newly detected device (that is, the same mouse that we deleted in the previous step).

Hardware compatibility errors

How to be if you installed new programs, connected new equipment, and the mouse stopped working. In such a situation, a hardware conflict is possible.

To correct the position, you need to log in through the safe mode. To start a secure mode, restart the computer and press F8 when you hear a beep.

Select "Safe Mode." Then click "Yes." If the manipulator functions, you need to delete newly installed programs. Now turn on the computer as usual.

Also, the problem of hardware incompatibility can be solved by selecting the "download of the last successful configuration" in the "Restore system". Here you need to install a recovery point closest to the date of the beginning of difficulties. If nothing happened, then choose a different time.

In the system recovery, it is also possible to log in through the "Safe Mode", then to continue the work, you need to press "no", then choose a recovery point.

Running troubleshooting

Windows has a "troubleshooting module". You can take advantage of its capabilities.

Through the keyboard, you should find the "Control Panel", the "Mouse" icon, the "Equipment" tab. SHIFT + TAB keys, switch to "diagnostics". Then "Next". To respond to system requests, you need to use the SHIFT key. Diagnostics can help identify malfunctions.

What mice are used in working with laptops?

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

As a rule, on laptops there is an opportunity to use the following mice:

Wired mouses are ordinary wired mouse that are connected to a laptop through the USB connector.
Touchpads (touchpad) - integrated touch panels built into the laptop, which are also referred to as a touchpad.
Wireless mice are far from new ones on the digital technology market. Wireless mice that bind to laptops through special receivers. One of them connects to the laptop, the other is built into the mouse.

Why touch, wireless and wired USB mice do not work on a laptop?

In this section, we will talk about general reasons why all the types of mice species described above may not work on laptops. Since these mouses are connected to a laptop in different ways, but everyone does not work equally, the most likely cause of such a breakdown can fade in the operating system.

Most likely, the laptop does not see the mouse. In this case, to start it is necessary to restart the laptop, which often helps to solve the problem. If the problem is not solved, then you can do the following:

Go to " Control Panel»

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

Next, find " Device Manager»

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

Then click on " Mice and other indicating devices»

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

With stable operation of the drivers, you will need to notice the mouse connected to the laptop, for example, as shown in the screenshot.

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

If, instead, the system instead of the mouse will show the icon of the type of yellow exclamation mark, it means that, accordingly, the laptop mouse does not determine. You will need to reinstall the driver preferably the latest version.

How to solve this problem we understood. Now let's talk, for what reasons may not work different types of mice each separately.

Why does not work touchpad on a laptop?

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

The touch panel on a laptop with a malfunction can either work with interruptions or not work at all. Consider possible causes of such problems.

If, for example, the touchpad reacts poorly to the movement of the finger on it, the mouse cursor disappears or moves with jumps, then, most likely, the touch panel you just need to wipe. Dust falling on the touchpad is a very common phenomenon. Wipe dust wet and squeezed with a cloth. Let the touch panel then dry out completely, as the touchpad can work badly because of moisture (wet fingers).

In addition, it happens that the touch panel does not work due to improper system settings. If the driver is attached to the touchpad, do not hesitate to install it. As a rule, installing or reinstalling the driver sets the default equipment. After installation, you will need to restart the laptop.

Also, the touch panel may not work due to the fact that it simply is disabled. Turning off the touchpad can either with your help or as a result of any system error, but you can turn it on again by the following methods:

Press at the same time two keys: one common for all laptops FN. And one of the top row: F1, F2., F3.... For each laptop model, there is its own top key.
If your laptop has a touchpad button, check it out
Install the utilities (you can download from the Internet) that are designed for the touchpad
Not every laptop can work simultaneously with two mice. If you have connected to a laptop a second mouse, in addition to the already existing touchpad, then turn it off.

If all these methods do not help you, then with a lot of probability, you can say that the problem with your touchpad has a technical character. In this case, you will have to go to the master, as you can hardly clean the touch panel.

Why does not work wired mouse on a laptop?

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

If the wired mouse is faulty physically, then it can be checked by connecting it to a computer or another laptop. Naturally, such a mouse will not work on any device, and it is best to change it.

But if the wired mouse is good and even glows, then the reason in its poor work lies in the laptop itself. To solve this problem, you can use these methods:

Connect the mouse in another USB connector
Reload Laptop
Reinstall Drivers
Remove the mouse from the operating system and restart the laptop. When reloading the mouse automatically appears again in the system.

Why does not work wireless mouse on a laptop?

A mouse does not work on the laptop, but shines what to do why wired USB wired, touch, wireless, built-in mouse on a laptop causes. How to make the mouse worked on a laptop

Wireless mice can also refuse to work. In addition, there are more capricious mice than wired. Problems for which they refuse to work can be as follows:

Slies batteries. In this case, the cursor on the monitor will move jumps, or suddenly stick. Batteries are best replaced with batteries that can be recharged periodically.
The receiver works badly. Connect it to another USB port
Hanging a manipulator. Turn off and turn on the mouse again

If nothing helps, then you have to buy a new mouse.

Video: Why does not work mouse on a laptop? static electricity

Video: What to do if the mouse does not work on a laptop ??? (solution here)

Hey! If you read this article, it means that your mouse has stopped working, or it works intermittently, or some buttons (wheels) do not apply. In most cases, a similar problem can be solved on your own at home, while you will not need any special skills and tools. In this article we will look at the main reasons why the mouse does not work on a laptop or pc as well as ways to eliminate faults.

Causes of mouse fault

Regardless of which model or type your mouse, it may fail by three main reasons:

Software;
Hardware;
It does not work in the game or application.

Although the third item can also be attributed to program reasons. I think it is clear what software breakdowns mean - related to incorrect installation of drivers, conflict with the system etc. Hardware malfunctions are reduced to mechanical breakdowns - wire break, contact contacts etc.

Sometimes the mouse works on the desktop, but at the entrance to the game the pointer does not respond to the movement of the mouse. For example, GTA lovers often face a problem that the mouse does not work in GTA San Andres. It turns out that this problem can be solved by simply by pressing ESC several times, and returning back to the game. Also, gamers are recommended to go to the task manager and close the Explorer.exe process in it. If the mouse does not work in the GTA in Windows 7, then the task manager on the Details tab need to find the task of GTA-SA.exe, click PKM and remove all the ticks in front of the processor cores, with the exception of any one. These recommendations help in a 99th case.

Wire Mice Problems

If your mouse with a "tail" having pS / 2 connector (Round plug), check if you put it in that port. Sometimes users confuse the keyboard and mouse connector. For the mouse port has a green color.

If the input device is connected to USB port., In this case, problems may arise. For example, the USB mouse does not work often due to the fact that Windows does not have the necessary drivers. In the new versions of the OS, such a problem is occurring much less. A malfunction is possible in the USB port itself. To exclude this probability, change the connector, or connect the mouse to another computer / laptop.

If in a set with a new mouse that does not work when connected, there is no disk with drivers, the necessary firewood can be easily found on the Internet.

Sometimes users are interested in why the mouse stops working. Those. It periodically works, and sometimes not. The problem lies, most likely in cutting cord - With a certain position, the contacts are closed and the mouse works, shifting slightly, the contacts will open, and it stops working. If the mouse is cheap, it is better not to bother and buy a new one, because When soldered, the likelihood is great that the wire will move in a new place.

Sometimes wired the mouse is on, but does not work. This suggests that it feeds from the network, because Diode is lit. Perhaps the touch laser hit and you need to fix it. The problem may also be in the same contacts in the wire or in the nest. In any case, the correction of this breakdown requires a certain experience and skill, so it is better to contact the service.

Why the wireless mouse does not work

The first recommendation, of course, may seem obvious, but still ... Make sure if you have batteries. Also check if the sensor is lit, if not - maybe the mouse is not turned on (the toggle switch is usually at the bottom). And very simple - you need to click the mouse button. It helps if the mouse has become not active due to prolonged inaction.

Now for reasons more seriously, why the wireless mouse does not work on the computer. One of them - signal reception unit. Try insert a USB receiver to another port. Also, the breakdown can be wounded in the mouse itself - the signal for some reason is not sent.

As for the software, the same problems as for wired are characteristic of wireless mice. You may need to update or install new drivers.

The mouse does not work wheels, buttons

If on the mouse buttons do not workMost likely the case in the mechanical breakdown, although the small risk of infection with the virus is also present. The main mechanical breakdown - the micrik islated. Micrik is a button that clamps contacts. You can experience such a breakdown on the lightweight mouse key. Again, with such troubles, it is better to buy a new device than to try to solder or change Micrik - inappropriate this work.

Much less often it happens that the right or left mouse button does not work, but at the same time the cursor moves, the wheel scrolls the page in certain programs or games. Here you need to watch the input devices settings.

Why does not work wheels in the mouse? Perhaps a mechanical part broke down - in this case it will be difficult to do something yourself. Also, the reason may wage in the absence of the necessary drivers. See the settings of the mouse in the operating system, you may not be specified in them for wheels.

I hope you have found the reason for the malfunction of your electronic rodent and were able to fix it.

Do you have a wireless mouse? Nothing wrong. Each user can solve this problem, regardless of its level of knowledge and training. Conditionally causes of faults can be divided into two types: hardware and software. First include nutritional and connection problems. In the second case, this is incorrect operating system settings.

Hardware fault

Wireless mouse does not work? We start checking the availability of hardware faults. To do this, perform the following actions:

1. We deploy the bottom manipulator up and check the operation of the LED. If it is burning, proceed with the next stage. Check the state of the "POWER" toggle. It must be in the "ON" position (if any). If the switch is all right, then you need to replace the batteries. If after that the mouse still does not turn on, it means that it can break. An expensive device can be attributed to the service center for repairs, but in the case with a cheap manipulator it will be easier to buy a new one. For the final decision making, it is recommended to check it on another computer and finally verify the malfunction.

So, we need to connect the mouse to a personal computer. To do this, it must have the "Connect" button (there is no one on some devices, in this case, we proceed to the next step). We clamp it for 6 seconds and check the performance. Still a wireless mouse still? Go ahead.

3. One of the most common faults in this case is problems with the connection port. Most of these peripheral devices use the USB interface to connect. There are several such nests on a personal computer. Give the transmitter and install it in another port and check the manipulator in operation. If the cursor returned, the mouse earned. This suggests that the problem is in the interface. It may be no contact or connection, "hanging" port. In any case, it is necessary to visually inspect it for damage. If there is no, then check its performance by installing another device (for example, printer or flash drive). If they earned, then, most likely, it was the "hanging" of the port, and nothing terrible happened. Otherwise, the personal computer has a port problem that can be solved only in the service center.

Software faults

All the necessary steps described previously are done, and you still do not work the wireless mouse ... This means only one thing - problems with the software part of the personal computer. To eliminate them, perform the following actions:

1. Go to the "Task Manager" through the "Start / Control Panel". Then you need to deploy the "Mouse and other Indicating Devices" section. In the list that opens, there must be your manipulator. If it is recorded as a "HID-compatible device", then you need to go to the official website of the device manufacturer and check the availability of drivers. For some manipulators (for example, SVEN 4500) there is no specialized software. And if it is, it needs to download and install it. For example: Wireless A4Tech Wireless Mode G10-810F. That is how it should be called in the "Device Manager", and it requires an additional software for it.

2. Sometimes the problem can be solved with the help of specialized programs. To do this, you need to install MS Fix IT utilities or Connection Tools. The easiest way to work with the first one. After starting, it will offer you to check the availability of hardware faults. After receiving a positive response, automatic scanning will be made. If the problem is detected, a message will appear with the query. You need to carefully read and either give permission to perform actions or not.

If the manipulations did not give a positive effect, it is better to buy a new manipulator or contact the existing in the service center.

Conclusion

The article describes the possible causes of why the wireless mouse does not work, and recommendations are given regarding their elimination. These tips are simple, so any user can eliminate breakdown without problems.