Lost bluetooth from the mouse, what to do. What should I do if you lost a USB receiver from a wireless mouse? Lost USB from Mouse

Do not hurry to get upset if you lost or broke the only Bluetooth adapter from the computer mouse. What to do? The problem most often can be solved without spending a lot of money.

Important! Do not hurry to run to the store for buying a new mouse! The adapter from the cells of the same models is programmed in different ways, so it will not suit. Money will be stuck.

First, follow these steps:

1. Turn over the mouse.
2. Look, whether there is a special icon at the bottom - an orange square, inside which is located a six-pointed star. The desired drawing is shown in the photo below.

This is a Logitech logo denoting that the mouse will work with a universal Logitech Unifying receiver. You can connect several peripheral devices at once. It is very convenient when there are few USB inputs in a laptop or computer. A compact USB receiver is inexpensive, within 1000 rubles.

If this character is not detected, then try to contact the warranty service in your city. Separately, the receivers are not sold there, but if there is some kind of malfunction or marriage in the device, they will be given a conclusion about the extradition of a new complete set. This method is only suitable if the check is preserved and the warranty period is not expired.

Will there be a wireless mouse without USB?

Only in the case, if initially, the adapter did not go with it at all. Find the user manual or look for information on the Internet, which type of transmitter is used in your device - Bluetooth (bluetooth) or Wi-Fi. Consequently, in your PC, the corresponding signal receiving module must be embedded.

Note!To pairing a mouse with a computer, a second working mouse is needed or an active touchpad.

For a mouse with a Bluetooth interface, first make sure that your PC supports the reception of this signal. For this:

1. Go to the Device Manager.
2. Find in the Bluetooth radio modulus list, and in the Network Adapters, "Bluetooth Devices".
3. Turn on the reception of the signal by pointing to the corresponding icon. It can be activated directly in the device manager by pressing the right mouse button and selecting the "Enable" string. Another way is to press and hold the FN key on the keyboard.
4. Click "Add Device", find the Mouse Name list.

Few people know about an interesting feature that Logitech's wireless devices can be used. The technology is called Unifying (from English. "Unify" - "merge") and allows you to connect up to six compatible wireless devices to one USB receiver. Therefore, you can free up USB ports, which is especially useful for laptops, where USB ports and so little. Also, this opportunity will help in a situation where one of the receivers "dies" and should urgently turn the device to another receiver or when one of the receivers is lost. In this article we will tell you which receivers provide Logitech Unifying technology, how to tie several devices to one receiver and how to return everything as it was, and what to do if the Logitech receiver was lost or broke.

What devices are compatible with Logitech Unifying receivers?

If you already have a mouse or a keyboard from Logitech, then it is possible to determine its compatibility with Unifying receivers in one second. Just inspect your device - on the bottom side of the device, on a sticker with technical information or directly on the housing should be depicted icon - this means that your model supports Unifying technology. In addition, such a badge should be on the receiver itself.

Many devices manufactured by Logitech have recently compatible with Unifying receivers. The list of the most popular models supporting the described function of combining devices is contained at the end of the article.

Please note that you can associate only those devices that are compatible with Unifying receivers (i.e. have an icon). This means that to tie to the Logitech Unifying receiver, any other device that does not support this technology is impossible.

How to connect multiple Logitech devices to one Unifying receiver?

First of all, we will need two devices (or more), which are compatible with Logitech Unifying. In our example, we use the Logitech M215 mouse and the Logitech K360 keyboard.
And, most importantly, you need to download and install a program from Logitech, in which we will match our devices.

Step 1. Connect one of the receivers to the computer and run the Logitech Unifying program. Ability to connect only one The receiver to pair multiple devices will be very useful if the second receiver broke or lost.

Step 2. To start the process of combining (or "pairing") devices, press the "Next" button. The program issues clear instructions with pictures, thereby hardly facilitating the task. If two receiver has been connected, you first need to disconnect one of the computer from the computer by Unifying, leaving only the one to which all other devices will be connected. After that, you must become an active button "Next", click on it.

Step 3. Turn off and turn on the device you want to bind to the receiver.

After restarting the device, in our case, the keyboard, the window automatically appears with the notification that the keyboard is ready for use, with which we congratulate:

Now we can connect the following device by clicking on the "Connect Advanced Device" button or finish working with the program.

"I want to return everything as it was." Bare Logitech Unifying communication, assign each receiver on one device.

If you want to break the connection (for example, if you sell one of the devices or you want to connect it separately to another computer), it does not take much time and effort.

Step 1. We connect to the computer "Clean" receiver and run the Logitech Unifying program.

Step 2. On the start page of the program, click the "Advanced" button and see approximately the following picture:

This means that the first receiver is "tied" two devices - a mouse and keyboard, and the second receiver is empty. On an empty receiver, we need to repense one of two devices, so we will have 1 receiver \u003d 1 device.

Step 3. Select the device to be untied from the first receiver, and press the "Break Communication" button. If there is a choice between the mouse and the keyboard, it is better to untie the keyboard, because after breaking the connection, the computer will not respond to your actions with the device, and the mouse is useful to us in the next minute (unlike the keyboard).

Step 4. Select a blank receiver and press the "Tie a new device" button. A window will appear in which we offer to turn off and turn on the connected device. Restart this device (in our example it is a keyboard), after which the device will be tied to the second receiver and is fully prepared for operation.

I lost the receiver from the keyboard or the Logitech mouse, what to do? Logitech receiver broke, how to be?

Unfortunately, sometimes Logitech receivers break. Even more often they are lost. If your device remaining without a receiver supports Logitech Unifying technology (i.e., has a special icon), then you can buy such a Logitech Unifying USB receiver on AliExpress. However, given the relatively high cost of a separate receiver (500-800 rubles) and long delivery time from China (at least two to three weeks), you may have been more comfortable to order a new mouse or Logitech Unifying keyboard. For example, if you have a Logitech keyboard with a broken Unifying receiver, you can please yourself and buy an inexpensive mouse that supports the same technology, and connect the keyboard to the mouse receiver (see how to connect multiple Logitech devices to one Unifying receiver?). It will be a little more expensive than a separate receiver, but at times faster.

Wireless USB mice adapters are compact and small antennas, but this convenience has the opposite direction. If one of you lost a USB adapter from a wireless mouse What to do first - so it's not to panic. In many cases, you can replace the adapter to another. I performed this procedure and myself, and helped several friends. The problem is truly common, but solved in several ways.

Method 1: Write to technical support

If you have lost the receiver from a well-known manufacturer's wireless mouse, then the first thing to do is to write to the official technical support service. The likelihood is great that you will be asked to take a picture of the device and send a new adapter to replace the one you lost. On the forums, many information about users who have used this method. For example, Logitech in most cases sends a USB adapter for free.

The only nuance: figure out the cities where they make delivery. The policies of the companies periodically change. If this is only Moscow or St. Petersburg, you will need a relative or familiar from these cities to get a device and then send a USB adapter to your address.

Method 2: Logitech Unifying Receiver

This method is suitable only for Logitech's products. If you have a "Unifying" logo on your device - the Red Sun Pictogram - then you can use any receiver with this image - not necessarily the original you have lost. Moreover, it is possible to connect to 6 devices from Logitech to one receiver: keyboards, mice, cliques, etc. What to do for this? It is necessary that they all support this technology, as well as download the Unifying application from the official site. It is it that will help you configure the wireless mouse to another adapter.

You can buy an adapter with unifying technology on the Internet: both used and new. Price - about 500-700 rubles.

Method 3: Setting to another adapter

This method is the most difficult and does not always work. When searching for forums on the question, "how a wireless mouse connect to another adapter, if it turned out to lose your", most often you can hear the answer "No, it is impossible." However, I managed to solve this problem in one case. In one, unfortunately, all the ways really did not work. But if I again lost a USB adapter from a wireless mouse, I would also checked them.

Remember that, in most cases, you will not be able to use a USB adapter from a similar mouse instead of the one you lost. Device recognition is performed by ID, so that the wireless receiver simply does not see your device. However, there is one way that you can check if you have a similar USB receiver at hand. Here is what to do:

1. Turn off and turn on the mouse. Batteries must also be charged.
2. Locate the device close to the USB port.
3. Insert the receiver to the USB port.
4. Not later than 15 seconds after that, simultaneously clamp the middle button (wheel) and the right mouse button.
5. After a few seconds, the mouse and the receiver will be agreed, the device can be used.

This method works, I repeat - for the same manufacturer (or the same model) and not always. But if you can test it, and he will solve your question, then it is hardly the easiest option further to use the device when you lost the original receiver.

Step 1: Check compatible USB adapters on the manufacturer's website

If adapters are interchangeable - it must be specified in the documentation or simply on the page with the characteristics of your device on the site. Sometimes the same receiver is suitable for devices released at an interval of 7 years. And buy an old receiver is possible for a penny, for example, on Avito.

Step 2: Check the drivers and utilities on the manufacturer's website

There is a chance that the problem of a USB receiver, which can be lost, has already been solved by the manufacturer earlier. If there is software on the site that will help to easily make a flashing of another similar receiver, your problem will be solved. For example, for the A4 mice, this is Office Shuttle Software G9_G11. What will remain to do is just buy a receiver on the Internet: Avito, Ali Express, etc.

Step 3: contact the service center

It is necessary to find out whether experts can find you a new receiver or bind a wireless mouse to another receiver instead that you lost. Often the experience of employees of the service center will solve the problem much faster than it would do. It may happen that the necessary receivers are without a warehouse. It is also possible that experts know how to make a USB receiving receivers.

There is another way: reprogram the receiver yourself. In this case, you will need special knowledge and software. USB receiver should flash on another device ID or change the frequency of the received signal. This method is quite complicated and suited to all devices. It will be suitable for people with technical knowledge, experience and free time.

If you have lost the adapter from a wireless mouse, I advise you to immediately contact the company's technical support, and then check all the ways and steps in turn. In many cases, the problem is solved, and you do not have to buy a new mouse. However, in another case, unfortunately, you will have to acquire a new device.