Stands under the phone: Best ideas. How to make a stand for your phone? Convenient gadget from improvised materials Support for your hands

In our progressive time it is difficult to meet a person who would not have a mobile phone. Even sending a child to the first class, parents provide it with the necessary means of communication. We use modern mobile devices not only for communication, but also for game applications, a set of text, read, as well as watching video and much more. Often the owner who wants to have a phone is always at hand, I want to arrange it in a convenient way. In stores are offered various expensive holders, but from our article you will learn what you can do

Stationery Binders

Surely those who study or working in the office are on the desktop several stationery clips called binders. Next, consider how to make a stand for your phone from these devices. To create a strong holder, you can use 1, 2, 3 and even more binders. Some craftsmen collect volumetric structures from a variety of different clips size. But such supports look cumbersome, and for temporary use they are uncomfortable. It is enough to spray two bindder among themselves and do not forget one metal end of the holder a little bend toward the phone located on it. Even one detail with a curved ear will be enough to maintain a mobile device.

From the same binders, you can build another design, placing the clips opposite each other so that the ears look at the sides. In these ends and the phone is inserted, as in the grooves. So that the clips are stood stood, clamp a small cardboard on both sides.

We use pencils

If there are no binders at hand, the question may arise: how to make a stand for the phone from the pencils. Before building this design, prepare 4 gum and 6 pencils. In fact, you need to assemble the volume geometric shape - tetrahedron. The principle is that two pencils need to fasten with a rubber band, and the third to oversee between the turns. They advise you to use pencils with a rubber band at the end to prevent slipping on the table and the stronger clutch with the phone.

Models from bottles

In the household we use many cleaning and detergents. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a bottle stand for the phone, consider further.

The type of device will depend on the form of the container. It can be a packag of shampoo, a shower gel, cleaning agent and another. Take a bottle longer than two phones. Cut the neck and part of the container on the one hand to about the middle. All the dimensions are relative - measure it at your discretion. On the opposite area of \u200b\u200bthe bottle, cut a hole corresponding to the parameters of the charger. You must have a detail that resembles a handbag or pocket with a handle. Put the phone to the stand, and connect the adapter to the network through the hole. Your mobile communication will not be placed on the floor, and the risk will disappear. You learned another way - how to make a stand for your phone. Optionally, this holder can be painted, salary beautiful paper or cloth.

Stationery clips

The easiest and most affordable version of the support is the usual metal clip. It must be accelerated into a straight line and folded as shown in the diagram. The resulting product is quite strong and stable. This design is perfectly holding a mobile phone, completely without interfering to browse the video.

Cardboard and plastic cards

How to make a stand for a cardboard phone? You will need a cardboard sheet from which it will be necessary to cut a 10 x 20 cm strip. Then you need to add it in half along short cuts. Next, draw a figure as shown in the photo shown below. The fold line must remain the whole. Outflow detail, you will see that you have a convenient and stable stand for the phone.

If you have a unnecessary card (any discount card), it will also be a great stand on the phone. Make at home this fixture is very simple. Return from the edge of the card 1 cm and bend the item along the short side. The remaining part of the card, begun in half in the opposite direction. You will have a zigzag figure. Install the phone to the resulting protrusion. Stand is ready.

Unusual stands of simple things

Intelligent people as a phone holder began to use ordinary glasses. They only need to turn over the arms upwards, which, in turn, must be crossed. The mobile device is located between the frame of the rim and towers who stick the phone.

How to make a stand for a phone from the children's designer? In this case, it all depends on your creativity and fantasy. To create such a model, you need to use a platform and several bricks of various shapes. Stand from parts can keep the phone both in vertical and horizontal position. The slope of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone in a vertical position is an old podcast. It must be opened and folded the cover back, thereby turning the box. In a hole that served once pocket for the audio cassette, you can put your communication device. The convenience of the stand is that it is rather durable and transparent, does not interfere when using the phone. In addition, it can be easily soaked.

As you can see, of the simplest items that will be in every home, you can make such a useful thing as the stand for the phone.

Mobile phone is a thing that should always be at hand. In the age of information technologies, it is difficult to argue with this. Sitting driving, preparing in the kitchen, engaged in needlework or other affairs, when the hands are not free, the necessary accessory will become the homemade and original stand for the phone.

Imagine a modern person without a smartphone or phone is simply impossible.

By material

In order to know how to make a comfortable stand for your phone, find out which material is used for its manufacture.

Often the owner who wants to have a phone is always at hand, I want to arrange it in a convenient way.

Metal. The metal accessory will be durable and serves a long time. The cost of such a thing will be higher, in comparison with the rest made from the more budget material.
Wood. Popular and affordable material. Bamboo, ash - common type of wood, which is used to produce holders.
Ceramics. Watching such holders are elegant, but, unfortunately, very fragile. Wizards for working with this material manufactures support in the form of animals, shoes, hearts, geometric shapes.
The cloth. More thank you choose when the phone is located on a small, specially stitched pad or soft toy. This kind of stand under the phone can be made it with your own hands.
Plastic. Universal material that allows you to choose a color and shape.
Paper. With your own hands from paper, you can easily build a stand for your phone. This is a practical, easy tool option, when there is no alternative option at hand.

Modern smartphones learned to perform many different cases, successfully replacing us hours, voice recorder, navigator, player and even a mobile cinema.

In style

Note! Choosing the Stand Style, consider not only your individual preferences, but also the features of the design of the room in which it will stand.

Before ordering or create a hand stand for your own hands, decide on the style.

Vintage. An option performed in the form of ancient belly from wood, metal, leather or ceramics, with a design for a gadget fixation.
Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in extra details.
Classic. Option for conservatives. Mainly the manufacture of holders in this style of wood, metal.
High tech. Modern style, without additional decorative elements. The material used is plastic.

Stand - a useful and convenient thing in everyday life.

By destination

On the table.

The main thing is the strength of the structure.

On a sticky basis. Products in the form of a circle, one side sticks to the phone, imitating a support that allows you to put the phone at an angle of 45 degrees.
On the stand. Fixes a device of any size. It consists of a lower plate, which is installed on the table and the clamp, which places the gadget.

Universal.

If you are a creative person, then you will find in any item under the phone.

There is a variant when the bottom side of the holder has a mount that can be attached to the table or any other surface. The basis of such a device is usually flexible and has a rotation of 360 degrees.
The second popular option: in the form of a flexible tripod, which can take absolutely any shape. This type can be used: on a walk, in bed, while washing dishes, in a car - absolutely in any convenient place.

The desktop stand for the house should be not only convenient, but also durable, stylish and well fit into the interior of the dwelling.

In a car.

For the car it is very convenient to purchase a magnetic holder.

Installation Principle: One side with a magnet is attached to the device, and the second to any accessible place of the car.

Stand for the phone from unusual and infrid materials

Stationery Binders

The device is solid enough and able to hold the phone.

If suddenly in the office it was necessary to fix the phone in a vertical position: here's how to quickly make a stand for a phone from the girlfriend with your own hands. Bindder consists of two parts, a colored clamp of plastic or metal and steel paper clips. We take two bindel and fasten them with each other. One clip put forward in the direction of the phone.

We use pencils

Try making a stand for a pencil phone.

Required materials: 6 pencils and four gum. Collect the volume triangle: tetrahedron. We fasten the ends of the two pencils among themselves and wake the third between them.

Important! To build a design, you need to take pencils with rubber bands at the ends to avoid excess slip.

Models from bottles

For the manufacture of a model from bottles, prepare the material: any bottle of cleaning agent, washing for dishes or shampoo, scissors.

Outcome: work should resemble a pocket.

Important! The size of the bottle must be larger than the length of the phone at least twice.

Cut the neck from the bottle and the front wall until the middle. This stand will be relevant for use during recharging. To do this, do a hole for the charger in the top back of the package. Phone fold inward, and charging shake first into the hole, then into the outlet.

This model can be painted, decorated with paper or cloth.

Stationery clips

The closure option will require minimal costs and time.

Clip must be straightened into a flat line. Bending both edges of the clips upwards, retreating 1 cm. Then we retreat 4 cm on both sides, this part of the design should fit tightly to the table as a support. The next stage - bend the clip in the middle to the top so that the previous bent parts remain smooth, perpendicular to the table.

From credit card

Set the resulting zigzag on the table, work is ready.

Old, unnecessary credit card, put in front of yourself in a vertical position. Return from the edge of 1 cm. And bend the edge of yourself. The rest will divide in half, bend, but in the opposite direction.

From the designer Lego.

Take a wide plate - the basis of the children's designer.

It is necessary to secure several bricks from the constructor on the plate, to maintain the rear panel of the phone, the angle will depend on the wall height, under which it will be fixed. To fix the device on the sides, take some more identical bricks and secure them on the basis.

From case for cassette

In a pocket, where the cassette once was stored, insert a mobile device.

If the house remained the old podcast, it is very easy to create a holding structure: open it in the greatest possible way to the part with a pocket for the cassette remained in front, and the upper podcast cover is located on the table.

Stand for your phone with your hands from paper and cardboard

Attention! Before making a stand for the phone in the form of origami with your own hands from paper, find and prepare your liked schemas.

You can make a small stand for your phone with your own hands from the simplest materials.

Folding stand from cardboard. You can make a stand for a tight cardboard phone. Take the cardboard sheet and cut out the figure: 10 by 20 cm. Fold it in half. Return 2 cm bending 45 degrees and cut 1.5 cm down, and then again perpendicular to the bottom edge, to the end.

Homemade stand for smartphone from cardboard.

Cardboard triangle. Before making a simple stand for a cardboard phone, prepare materials: cardboard strip, stationery buttons, glue or tape. Take a strip of cardboard and fold into the triangle. Edges Fix with glue, scotch tape or buttons.

For 5 seconds you can make a solid and strong stand for your phone.

From the sleeve. Excellent stand for the phone with your hands from the cardboard will be released from the remaining sleeves from paper towels. A wide sleeve must be cut in half. In the resulting detail cutting a horizontal hole where the phone will be placed. From the buttons you need to make legs so that the stand can be put on the table.

That's how easy it is to quickly make a functional stand for your phone with your hands from cardboard.

Origami. From the usual sheet A4 there will be a good stand for the phone from paper. There are several schemes for which you can fold the excellent support for the device. Knowing how to make a stand for a phone from paper, you can always fold it in a few minutes and enjoy with pleasure.

Stand for the phone from paper in Origami technique.

Stand under the phone do it yourself from a tree

Take a wooden bar and make a blank, leveling and processing edges. We apply the gadget and cut it in size. Corners need to round and sand. Making markup under the grooves, cut them out. Take the chisel and thoroughly clean the carved grooves. Before processing oil, overcame work again.

The homemade and original stand is ready.

Stand for your phone with your own wire

Using a conventional wire, the method of twisting by the most different ways according to the schemes, you can create an original holder for mobile. The main thing is that the weight of the device is evenly distributed to the homemade holder.

The advantage of this stand for the phone made by your own hands is that it is possible to put the phone on it both horizontally and vertically.

Everyone knows why and when you need a stand for a phone for a phone, knowing the quick ways to create it from the remedies, you can always watch a movie or to engage in household chores and communicate with your video calls.

Also, this stand can be applied as a holder for tablets and e-books.

Video: how to make a stand for your phone.

50 options for original stands for phones:

The stand for the phone can be made from the most unexpected materials. We have prepared for you the most interesting ideas and master classes with photos and videos, with which you can easily make this useful accessory with your own hands. Stands made of clips, sheet of paper, traffic jams and other simple things - everyone will find a suitable option for their phone.

Earlier we told you how to make popsock. This is also a kind of stand under the phone. We advise you to see this selection of ideas.

Clips for paper

With the help of paper clips, you will only make a great stand for the phone with your own hands. It is very convenient when you need to see something during any other classes, and the popsock or any other stand at hand did not turn out.

We need:

any cardboard;
2 clamps.

Just attach them on both sides - and the stand is ready. The phone will be firmly fixed in the "ears" of the clips.

This device can be used as a tripod. The holder is useful for the creation of group photos, when there is nothing at all.

Shell

There you will not even need special instructions. The main thing is to find a suitable shell from which you make a phone stand. It should be big enough.

You will also need glue type "Liquid nails" or "rubber" glue, which, when frozen, turns into an elastic plastic mass. If this is not, you can use acrylic plasticine - it does not bother anything.

To make a stand for a phone, you need to apply a layer of this glue into the place where the gadget will touch the surface of the shell. If it is not stable, glue can be applied at the bottom to firmly fix it.

Such a homemade stand for a mobile phone looks very beautiful and fit into any interior.

Beautiful jar

The simplest stand for the mobile phone can be made from the usual bank. The main thing is to choose the appropriate size and design.

Pick up the jar into which the phone enters freely and does not overturn it under your weight. If the source looks not too pretty, armed with acrylic paints. With their help, you can make a beautiful stand under the phone. Sewing it original, add splashes or patterns, any inscription.

You can decorate a jar with a winding of twine or braid.

Wine plugs

Do not throw away wine plugs - it is a great material for creativity! Of these, it will be just an excellent stand for your smartphone. Durable, eco-friendly, beautiful, comfortable.

We need:

20 wine plugs;
super glue;
lace;
twine;
any decor.

Tubes glue with each other columns and in a row. First assemble the blanks for the rear wall. Then glue the front completely. The bottom of the stand is glued gradually. Lean the plugs to each other one. Then lean the rear wall.

For beauty, you can add a lace, thin twine or thread Moulin and any cute little things.

Bamboo chaise lounge

A very interesting version of the phone is a homemade mini chaise longue. It looks creative, and you can easily make it in the home in a few minutes.

We need:

bamboo rug;
bamboo sticks;
6 coffee sticks;
any paint;
nippers;
adhesive pistol.

Look at this short video master class in which the author step-by-step shows how to make the original stand for a mobile phone with your own hands. It turned out a bright stylish accessory to which you can decorate the desktop or even to give someone.

Origami

How do you like to make a stand for a phone from alone? Earlier, we told you in detail about the Origami technique and its basic principles. We advise you to read our material on this topic, especially if you are new.

For this craft you need only a sheet of tight paper.

Watch the video instruction in which the author does the custom stand for the phone or tablet. Repeat after it is simple enough. Such an accessory is easy to do in the office, university or at school to take advantage of the mobile phone for reading or viewing the rollers.

Simple and beautiful

The simplest stand under the phone without glue can be made not only from the clips. You will need a plastic bucket from mayonnaise and scissors, and the rest is a matter of taste. It is better to choose the most dense base so that the phone is fixed securely.

Step-by-step master class is shown in the video below. You can decorate the cracker with acrylic paints, markers, stickers, sparkles and anything else.

We hope you were able to choose a suitable master class to make a useful accessory for your phone. Each of them can be modified, improved or fit into it. Your stands will turn out beautiful, original and very comfortable.

Smartphones in the modern world replace many more familiar items a few more years ago. Player, clock, navigator, voice recorder, mini-cinema - one gadget accommodates maximum useful functional. If earlier this adaptation was most of the time in the bag, then with the appearance of additional features it moved to the desktop. How do you make a stand under your phone and what materials are preferable to use, read further.

Varieties of models

The era of the development of information technology dictates its own rules. Mobile has become so indispensable that people practically do not produce them from the hands. With an increase in the significance of this device, the telephone stand has its advantages. First, it organizes life. Secondly, hees constantly keep the phone with you.

Popular species:

Stand from stationery binders

Prices for phone stands

Stands under the phone

Step-by-step manual instructions

Since many technologies have been developed to create this organizer, we suggest familiarizing yourself with the most popular. Just a few hours will be required to create a stand. The product is quite fiscal. In most cases, all necessary materials are under hand.

Paper origami

Miniature Molbert.

It is a classic telephone stand, externally similar to the franger.

mini-easel;
pencil;
jewelry;
woods for needlework made of wood;
brush;
glue;
mOD PODGE;
acrylic paints.

Prices for artistic acrylic paints

Artistic acrylic paints

For processing, it will take grinding paper with shallow grain.

Stand from Binder

Stationery - one of the most optimal options for the manufacture of the organizer.

Required materials and tools:

2 large metal or plastic brackets;
1 medium-sized bracket;
scissors;
color Scotch.

Painted in various colors BOPP ribbon sold at any stationery store.

Sequencing:

Video Chaise Lounge Class for Phone

Panda Stand

The original product is particularly relevant for children. With all its utility, it is a cute toy.

12 oval cardboard blanks;
1 pair of fluffy white 1 pair of black socks;
blush;
wool;
glue.

For this device, terry socks are suitable. In composition, they are hypoallergenic, since 100% are made of cotton. The difference from the cotton consists only in fiber weaving technology.

Step 1. Cut from cardboard paper 12 oval elements and divide them into 3 groups with an equal number of forms. Take 1 stack and on one of the parts to circulate the outlines of the bottom of the smartphone, including the hole for the charging wire. Remove according to the markup made. With this template, do the same with the remaining 3 sheets and glue 4 pieces with each other.

Step 2. The second group of cardboard ovals is designed to decorate the part of the phone in which the wire is located.

Step 3. To postpone from the 2 remaining groups of 1 details. Printed the remaining billet.

Step 4. Fix in unused elements of wool. Cut the white sock and glue it on a fluffy mass.

Step 5. Half a black toe stick to the main part of the product.

Step 6. For the completion of the ears, cut 2 oval, plane them with cotton and decorate with black toe. For an eye cut 2 semicircles and reorganize with black toe.

Step 7. Glue all the details of each other. Rear fix the pending white item. If desired of the sock and wool, you can make a tail. Rushes make cheeks.

Prices for adhesive gun

Adhesive Pistol

Video - Panda stand under the phone. Master Class

Oak planning stand

Required tools and materials:

oak planks;
yardstick;
glue;
clamps;
emery paper shallow grain;
mineral oil;
fantasy and circular saw;
marker;
rack for a saw;
ribbon grinder.

You will also need a fugoval-flight machine for the initial and finishing grinding of wooden surfaces.

Step 1. Fit the details in thickness, to trace and trim in width.

Step 2. Bear 4 details together.

Step 3.Treat the workpiece of the fugovinal-flight machine and cut.

Step 4. Split one of the elements received, glue into the bar and tracing.

Step 5.Glue the blanks together.

Step 6. After the glue dry, pollute the product and cut off the reference bar at an angle.

Step 7. Project edge sandpaper and coat with mineral oil stand.

Wooden organizer

Design feature - shelves for the placement of smartphones are horizontally. Externally, the product is a vertically directed box with a closed front wall. Despite the fact that this item increases the consumption of the material, thanks to it, the safety of telephone storage is ensured.

The stand is assembled from the sawn plate with the help of ebovints. With a hot iron, the end parts are closed by a self-adhesive edge. The bottom can be made of cheaper raw materials. If the previous model has a base taken from undergraduate materials, then it must be purchased for this stand.

Step 1. Selection of Material

Table 1. Analysis of in demand for the manufacture of timber organizers

Variety	Characteristic
	Popular material for the manufacture of various home organizers. The appearance of the fact that the minimum thickness of the available boards is from 20 to 25 mm, not the most successful choice. Given the miniature of the design, it will take a sheet with a thickness of 12 to 15 mm thick for its creation. Otherwise, the stand will look at cumbersome. Reduce parts to the desired dimensions can be only with the help of professional equipment, fugovinal-flight machine, for example.
	Multilayer board produced by gluing a pre-treated veneer.
	It is a cladding board made of natural wood.
	Optimal choice. Timber, made of several layers of small particles of wood, interconnected by synthetic resins. Made from the first-class chipboard.

Due to the specifics of the technology of creating at LDSP there are a number of advantages over the raw materials in the table. This applies to good aesthetic qualities and environmental purity.

Basic properties:

Step 2. Preparation of tools and equipment

Required toolkit:

Lobzik. Manual fixture equipped with a replaceable saw surface. Created for sawing thin boards and plywood.
Pilking. Steel blade installed in the jigsaw.
Drill. The cutting device, the principle of operation of which is based on the rotational motion. Used to create holes.
Schucker. Paper covered with broken glass or emery. Diffuses the degree of grain.
Confirmate (Eurovint). Fastening element, which is a rod with an outdoor thread and head. Forms an internal carved drawing in the deepening of the attached part. In addition to them, we need wooden wars.
Drill. Electric or manual tool produced to quickly design holes.

In addition to the listed, the self-adhesive furniture edge, iron and glue are needed.

- It's great and easy to implement the way to decorate housing, make the interior really unique. Such such crafts can become an original gift for loved ones, and if you involve in the process of children, the lesson will become a true field for creativity!

Step 3. Acquaintance with safety regulations

Before you begin to make a stand, you need to get acquainted with the azas of carpentry work:

Dress the worker camouflage.
Prepare a place to create a product.
Firmly fix the Vepile table to the workbenk.
Check every tool for good condition.
Tightly insert into the frame of the manual jigsaw pylon.
In the process of work, it is impossible to lower over the workpiece or make sharp movements to the tools.
Adaptations with pointed tails should be equipped with wooden handles.
During work, it is forbidden to be distracted.

Step 4. Cutting and assembly

Video - how to make a stand for your phone. 7 simple ways

It doesn't matter for what reason you needed a stand for a smartphone if there is no factory accessory, it is always possible to quickly make analogue of the remedies. Moreover, it is often not about disposable stands, but about those that can be used for a long time.

Stationery clamps

Stationery clips or binders will help to quickly and easily build a stand for a smartphone. It is enough to supplement them with any plastic or even a paper card and a gadget for a gadget. You can build a more complex design of only binder - as you wish.

Paper or cardboard

If you remember the traditional Japanese art of origami or congratulate the scheme of the homemade stand from paper on the Internet, then the mount under the smartphone can be built literally with bare hands using one scissors and more or less tight paper or cardboard.

Wine plugs

If there are multiple wine plugs, a small amount of glue, a knife and free time, you can make a stand for a smartphone literally within a few minutes. It turns out a fairly stylish accessory.

Toilet paper sleeve

Cardboard sleeve from toilet paper A pair of knife movements turns into a completely wealthy stand for a smartphone. And if you add a more pair of plastic cups, then the portable column will turn out.

Stationery clips

If there are no binders clamps at hand, but there are at least a couple of large stationery clips, they will rise. A pair of movements can be turned into suitable to hold a support smartphone.

A plastic card

When the blood of the nose needs a stand, and at hand there is nothing but plastic cards, then they can be turned into a smartphone holder. It is better, of course, to do this, use unnecessary discount cards or at the thin end of gift certificates, and bank cards are left to the most extreme case, because after the improvement it is unlikely to use them in the main purpose.

Designer LEGO.

If there is a sufficient number of cubes and a rich imagination, it is easy to assemble a real multifunctional docking station. What is good - it is also easy to turn back to the designer. And this is perhaps the most universal way to create a stand for a smartphone with your own hands.

Case from audio cassette

Nowadays, it's easier to find the LEGO designer than the case from the audio cassette, but if it is at hand, then actually the stand is ready. Do not even refine anything - it's enough to remove the cassette and deploy its case for installing the smartphone.

Pencils and rubberbies

In the office, where many pencils and gum, but there is not a single stand for a smartphone, it can be made of what is. It will be necessary to simply tie a few pencils with rubber bands in the rack and make them together all the same rubber bands.

Roll Scotcha

Probably the most obvious and simple version of the gadget support for the gadget. It is enough just to open the smartphone to the roll of the tape or put the smartphone inside and release the hands. Do not even refine anything.

It is logical that the 10 presented ways to create support for smartphones are not exhausted. The holder for the gadget can be almost everything that is at hand, if you show a fantasy.