Laugh a blocked iPhone 4. How to reflash iPhone with PC and iTunes. Refracting iPhone or iPad in normal mode

Hello everyone! The topic of the restoration of IOS firmware has long been reviewed on the Internet along and across. And, frankly, at first I did not want to write about what is already in the network. Why make the same type of instructions? But then it was still decided (these are the torch of the author of this blog! :)) that there is a need for this.

So why another instruction? Everything is very simple - I have a lot of questions, both in the mail, and in the comments about various failures in the iPhone software and, in most cases, you can cure them only with the help of software recovery. So the process is important and bypassing it in any way can not, and I will be easier to answer your questions - simply pointing to this article. Eh, it seems to be justified :) Let's go!

Several important comments:

When restoring the iPhone, absolutely everything is removed from it. It turns out such a phone as if you just bought it in the store.
You can restore only with the help of the computer and iTunes program. "By air", via iCloud or otherwise do it impossible.
The procedure is performed both with a fully operational device and in the event that the IOS system is not loaded (in this case, you need to enter the DFU mode).

By the way, recovery is the only way to correctly remove the jailbreak with the iPhone.

Detailed IPhone Restore Instructions

So, complete and detailed step by step instructions. We start iTunes on your computer and connect the iPhone if everything has passed successfully, then in the main program window, the phone model is displayed, its firmware and other data. At this stage, two errors are possible:

The computer does not define the iPhone - about it.
If the device does not submit signs of life - we try.

As a result, with any successful connection we get one of two windows.

And here we are interested in only one button - "Restore". If you just click on it, then iTunes will begin to prepare the iPhone, downloads the last relevant firmware from the Apple servers and starts it to install it.

Attention! The "Find iPhone" function must be disabled!

The largest "snag" is precisely in the firmware loading. Sometimes this process takes a sufficiently large amount of time, especially with a slow Internet. Plus, if the connection is not distinguished by stability and possible communication breaks, then iTunes every time it will begin to download it again, which will agree not very nice and long.

But there is a way to speed up the recovery process. To do this, you must independently download the software file in format.IPSW (from any third-party resource, such as 4PDA) and save it on your computer. Note - for each iPhone model, will be your different from the other file!

Now, clamp the "SHIFT" key on the keyboard and then press the "Restore" button. A window will open asking you to specify the firmware file. We choose in advance downloaded and waiting - iTunes will do it yourself.

Why can't you restore the iPhone and what to do?

There can actually have a lot of reasons. Moreover, they are connected with both a computer or device, and simply with inattention.

Here are the most basic:

Lack of Internet access on a PC or periodic of its cliffs and shutdowns.
Antiviruses, firewalls and other programs preventing the normal functioning of iTunes. Maybe your security settings are configured in such a way that iTunes elementary does not access Apple servers.
Slow internet. Not even so. Very slow Internet. Now it is rare, but I remember my attempts to reanimate the iPhone in the distant 2009 using the access to the network with a USB modem. I will not paint everything, I will say the result - the recovery failed.
In the case when you independently download the firmware - see if it approaches exactly for your phone model.
Check for iTunes. If so, set the latest version of the program.
It is very desirable, so what is there, be sure to use the original USB cable, not certified can help the appearance of various errors. Unoriginal can only be, and it is not always, but for flashing (recovery) they are not suitable.
It is possible that the problems are already inside, that is, "iron". Faults may be mass - from the loop, to the motherboard. Remember, not or too much.

As you can see, there are really many options. Please pay attention to any trifle - after all, it is because of it that may arise with the recovery of the iPhone. Anyway, something does not work? Be sure to write in the comments - let's try to figure together!

Greetings all the readers of the computer blog site! The other day my friend turned to me, with a request to unlock the iPhone 5S. According to him, he, being drunk, put a password on the phone (from his girl), and I could not remember him on the morning. After several unsuccessful password input attempts, the iPhone is automatically blocked.

When turned on, the inscription " iPhone is disabled! Connect to iTunes.. " When connected to a computer, the problem was not solved - the password was still required.

In this article, I will tell you how to unlock any apple device - iPhone 4, 4S, 5S, 5, 6, 6s, 7, iPad, etc. remove the lock. We will be firmware, i.e. Full reset of the phone to the "factory" state. Firmware iPhone - the procedure only seems to be complicated, but in fact - quite simple, so do not rush to carry your phone to the service, and first try to do everything yourself.

Firmware will help solve any software problems with your phone. In essence, we will do full reset iPhone to factory stateAs if we just bought it. Immediately warn you, we will need access to the Internet.

I unlocked iPhone 5, model A1429, but the method of firmware is universal and will work for all Apple devices - iPhone 4,5,6,7, as well as iPad..

Most often, this article read people who forgot your password to your phone. In such cases, iPhone / iPad gives a message type: " iPhone is disabled. Connect to iTunes »or "Repeat in 24,000,000 mines«.

However, you can try to flash the phone at any problems with your iPhone. For example, if your iPhone is buggy, reboots, or not loaded and does not turn on at all - flashing iPhone can help you!

ALARM! When using this method, all the information on your Apple device will be Star. Be careful, and if you hope to remember the password - look for other ways to unlock.

All below the actions described, you make the risk and risk, and I am not responsible for the spoiled phone. Fortunately, the standard procedure is invented by Apple themselves, so forward! 😉

Immediately a grief of those whose icon is tied to icloud.

If there is no access to this iCloud`, this method will not help you anyway. After the firmware, the phone will start asking the password from the iClaude. In this case, you can restore access to the phone, only having an original box from this phone, as well as a cash check on it. All this will need to be sent to Apple, they will check the information and restore access to you.

If you do not have a password, no check - alas, you have a brick. Well, you can change the motherboard, or sell the phone on parts, which is in principle equivalent.

How to flash any apple device - iPhone 4, 5s, 5, 6, 6s, 7, iPad? Step-by-step instruction.

To begin with, you need download and install iTunes From the official site of Apple: apple.com/en/itunes/download/

Installing iTunes should not cause you difficulties, but, just in case, it is described in detail in video at the end of the article.

So, we have the program installed.

First, we need to switch the iPhone to the recovery mode. Make it very simple:

Congratulations! You entered B. Recovery Mode.!

Now we will transfer attention to the laptop screen. Must be automatically started to start iTunes. If this did not happen, run it manually. You will see a window with a proposal to restore or update the iPhone:

Click the button " Restore«.

Next, most likely, the window will pop up with a proposal to install the latest version of iOS. After pressing the "Restore and Refresh" button all data on your iPhone will beThen downloaded and installed new on the iPhone. We think then click this button.

It can jump out such a window:

The firmware download for iPhone from the EPL site will begin. Download time depends on the speed of your Internet connection. The progress of download can be observed by clicking the icon in the upper right corner:

After passing all the steps, you will see a welcome screen on iPhone:

Hurray, our iPhone 5 is unlocked! It remains to insert a SIM card, and set it up as if you just bought it in the store!

iPhone is disabled. Connect to iTunes - how to unlock? [VIDEO]

I advise you to watch a short video below. In it, I tell about the process of unlocking iPhone 5 as detail as possible:

Do not forget subscribe to my channel on YouTube!

Error 4013 when restoring the iPhone.

If you read further, and you do not enjoy your "resurrect" phone - it means that something did not work. Honestly confess, and I didn't have everything from the first time smoothly. With the first attempt to restore iPhone by firmware, at the stage "Waiting for iPhone" An unknown error occurred (4013):

"B .., well, what else for x ..?!" … "Well!" - I thought. "Faced with the problem - I can warn my subscribers about it!" Began to look for a decision. Forums Digid with advice of various kinds. Very popular was the option " Shove the iPhone in the freezer, and then flash«:

I did not resort to such radical solutions as a frost of a foreign apparatus, and decided to first fulfill the recommendations from the official website of Apple.

Apple technical support If these errors appear, recommended 3 options - install the latest Windows or Mac updates, change the USB cable (also, will advise try to stick the device to another USB port), or try to restore iPhone on another computer:

Because I have a lot of different laptops at hand (), I decided to go through the third way, especially since on the first laptop because of the small volume of the hard disk was "trimmed" of Windows 7. Of course, without any updates.

What do you think - after starting the recovery procedure on another laptop, everything went successfully!

If you have any other errors when recovering iphona - see.

If you have questions left or you just liked the article - Leave a comment under it.

And also join

The iPhone is a reliable device that can delight owners for a long time. The quality of assembly and software makes the phones of this company unconditional leaders in the market.

After some time of operation, some users think about the possible firmware of this device. Under the term "firmware" implies installation on the gadget software. Sometimes it is required to eliminate any system errors. Repair work in specialized service centers are quite expensive, and not every owner is ready to pay for it. The second reason for the possible refreshing system is the installation of the software that is not provided for by the manufacturer.
Do not forget that the firmware can help and in the case of blocking the phone when you cannot remember the password.
When resale the device is also recommended to hold this procedure to completely delete its data and the phone.

Do special programs need to flash iPhone

There are several types of iPhone firmware depending on the purposes and desired end result:

Restoration. It is important to remember that the device firmware always happens with a complete deletion of data. Therefore, starting a process, you must make sure that all important data is saved.
Update. At the same time, the last version of software is installed on the device. In this case, all user information is maintained in full

Important. The iPhone does not allow you to set the older version of the software than installed. The transition from beta-version to the overall also blocked.

For regular firmware Iphon, the company has developed a special program called iTunes. It allows you to update, restore and change the software. This is the main method recommended by the manufacturer. However, if you need to simply update the software, you can use the means integrated into the phone itself. This requires a stable connection to high-speed Internet and a little time.

We flash iPhone through iTunes

The standard program for the iPhone firmware is iTunes. To do this, first of all you need to install a program on a personal computer. It is important that it takes out the latest version of the release. This method is officially recommended by the manufacturer.
To perform the firmware, follow these steps:

Using a special cable need a phone to connect to PC
Running the program should select a device management page. To do this, you need to activate the button in the form of a phone.
Hold down the "SHIFT" key, click on the "Restore iPhone" button. If the computer "wt" is used, hold the "alt"
In the window that opens, you should find the file that is responsible for the firmware. In order to distinguish it from the rest, it should be remembered that its extension: "IPSW". In the case of an erroneously selected file, the program will highlight an error
If everything is selected correctly, iTunes will ask for confirmation of your actions. You need to activate the "Update" key
All further processes are carried out automatically and regulated by the program that will delete the unnecessary software, and will install the required

Is your iPhone blocked? How to flash in that case

In iPhone, the data is quite strong protection of its owner. The set password can make a useless piece of metal from the device in other people's hands. But what to do if the owner himself forgot his password and can't get into the device?
The most incredible way is the repeated entry of the password, since after the fifth attempt comes the device blocking. An attempt can be repeated only after 1 minute. After 7 attempts to wait for 5 minutes. In the end, the device will simply turn off and the password will not be impossible.
Solve the problem in three ways:

Using iTunes.
With iCloud. To do this, go to the siteicloud.com. There will be required to enter your Apple ID into a special field. After performing a simple algorithm of actions, you can return your phone into a working condition.
Through the recovery mode. To do this, you need to connect the device to iTunes simultaneously hold the "Lock" and "home" buttons. After some time, the iTunes icon will appear, and a window will appear on the screen, allowing you to start the recovery program.

How to flash chinese iPhone if he is on android

This iPhone is a very expensive device, which is not capable of anyone. Chinese firms have released an analogue of a phone running on android. Naturally, the owners of such devices are also interested in his firmware.
To do this, first of all it is necessary to download the firmware version suitable for the copy of which the process will be made. FlashTool program is used to start the installation process.

Are there any way to flash iPhone without iTunes

In some cases, the installation of iTunes is not convenient, and sometimes it is not even possible. What to do in such cases? Also, special difficulties are among gadgets with jailbreak.
There are several ways to alternative firmware of the device:

Via wifi
Using RecoveryMode.
Through DFU Mode.

Via wifi

If the phone is connected to a high-speed Internet, you can use the means implemented in the gadget itself. They allow you to perform the firmware directly, without applying any additional devices.
This feature exists with iOS 5 and higher.
To do this, you must connect the gadget to WiFi by pressing the appropriate icon. Next, in the "Settings" menu, go to the "Basic" section.
There is a software update tab. The program itself will tell you what actions must be performed to successfully complete the process.

Using RecoveryMode.

RecoveryMode is an emergency way to restore the system. It is commonly used if the phone for any reason is not able to turn on whether to work in standard mode.

Through DFU Mode.

This method allows to bypass standard phone tools. Its operational system does not participate in the firmware process. In this case, all actions are performed using Firmware. Most often, this method is recommended to use those who have a jailbreak on the phone.

How to flash iPhone 4S yourself: video

Currently, the iPhone is the leader in the global market for mobile phone sales. This is due to its features in maintenance, great opportunities, a variety of functions, options and services provided. This phone boasts high quality and long years of uninterrupted operation. But, nothing in this world is forever, including electronic equipment. Over time, the device ceases to function well, some incomprehensible errors constantly jump out. Quite often and without visible, the reasons for the smartphone restarts. In addition, each user may encounter a problem when the last update of the personal mobile device was not very successful either the new version of the operating system did not like. In this case, the first one thinks about the owner, how the iPhone firmware is carried out by the corresponding version, including 4S. On how to reflash the gadget on your own, we will talk further.

Features of flashing smartphone

The listed problems are forced to think and make a choice. You have an iPhone to the service center, where it is 100% will be repaired, but it will have to pay a fairly large amount for it, or try to find a solution to the resulting problem, simply by flashing the gadget. In the same way, the specialists of the service center are most often used. No need to be afraid to independently carry out flashing, as it is not as difficult and long, as it seems at first glance.

Opporting iPhone is the restoration of the phone to a working state. Attention should be paid to the fact that the flashing will lead to the loss of all information from the phone.

Before the procedure, if the gadget is in working form, it must be connected to the PC and create a spare copy. Personal photos, video, as well as audio materials on a hard disk, should be copied, because the disposal of the device will lead to the fact that it will return to the factory settings and will be completely clean.

It should be taken to attention and the fact that beyond the dependence of the variation of the iPhone, be it 3, 4S or 5S, the flashing procedure is identically implemented in all cases. Therefore, you do not need to worry about the inconsistency of the instructions for your phone, you just need to carefully and clearly perform the steps described.

Below will be described in detail the firmware procedure on the example of iPhone 4S.

Preparatory actions

Even before the beginning of the operation, the subscriber needs to download the firmware having an extension. PSW. For a specific model, the iPhone is provided by the corresponding version.

Determine what kind of version is needed for a particular smartphone, it is possible very easily. The firmware files contain a device version (iPhone 3, 4S, 6), as well as its model directly, which is an alphanumeric combination located on the back side of the gadget below the logo.

The main complexity of the selection of the firmware version, respectively, the models is that there are GSM, as well as the CDMA model of "apple" devices. Their difference lies in the fact that these devices are functioning in various cellular networks. The firmware for GSM iPhone 4S will not suit iPhone 4s on CDMA.

After determining the personal device model, you need to download the necessary firmware. Each subscriber may find the latest version of IOS, or if it doesn't like it, you can download a little outdated, standing on the smartphone earlier. The main condition is that the old version, the downloading of which is being held again, was signed by Apple.

Also, before updating the subscriber, you must turn off the option called "Find iPhone". Otherwise, reflash the iPhone 4S does not work out, since this feature prevents the procedure under consideration, therefore, iTunes will emboss the error.

In addition, it is better to make sure that the newest iTunes version is installed on the smartphone, for this you only need to start the program. If the new version is available, the program will automatically put on you knowing you and will be able to upgrade. After performing all the preparatory actions, you can safely move to the process of flashing.

Flashing procedure

In general, to solve the problem under consideration, the iphone 4s holders are offered two options, each of which is absolutely valid, effective, and also allows you to restore the smartphone quite easily and quickly:

With help
Through DFumode.

The first option is an emergency recovery mode. Most often it is used to restore the operational action of gadgets on iOS, after the moment when their proper functioning began to make failures.

The second method is not different from the first almost nothing. The difference lies only in the fact that the procedure is carried out directly using Firmware, bypassing the iphone operating system. Often this method is applied when the device has a jailbreak or when flashing with the first method is impossible.

Refracting with RecoveryMode

To carry out the operation by this method, the subscriber should turn off the iPhone and wait for the full repayment of the smartphone screen. Then you need to connect it to the computer while holding the "Home" button. PC will take a device in RecoveryMode recovery mode.

Subsequent actions must be performed in such a sequence.

It is required to run the iTunes program and wait for the moment when the program detects the iPhone, there may be two options here:

iTunes will offer the user to restore the connected device. In this case, you should click OK.

iTunes absolutely does not react. Then you should click on the phone icon, find item called "Iphon Recovery", after which it must be selected by clamping the SHIFT button (if Windows operating system is used) or Alt (when the MAC operating system is used).

Next, the File Manager opens, where the subscriber needs to select the firmware. You need to find the file that contains the firmware downloaded before the start of the operation. Then you need to select it and click the "Open" key.

After that, the program will do everything yourself, it is only required to wait for the process final. After completing the device needs to be disconnected from the computer. Then you need to turn off the phone by holding the POWER button. After that, by clicking on the same button, the smartphone must be turned on. That's all, absolutely all iPhone settings are fixed, and it is ready for further operation.

Refracting with DFumode

Even before the start of the process under consideration, the smartphone is required to be translated into DFumode. Then the phone must be connected to the computer and turn it off. After that, on the device at the same time, it is necessary to hold the Home buttons, as well as POWER and count ten seconds, after which the POWER key needs to be released, and the Home continue to hold until the program recognizes the iTunes program of the configurable smartphone in DFU mode.

Subsequent actions should be performed in a strict sequence, and they are almost completely identical, as in the case of recoverymode:

First you need to select the necessary device in the program.
In the Manual menu, you must find the item "Restore iPhone".
After that, it must be selected by pressing the SHIFT button (if the Windows operating system is applied) or Alt (when the MAC operating system is used).
In the window, which as a result of this has opened, you need to specify the path to the file with the previously downloaded firmware, and then click on the Open button.
After completed actions, the subscriber needs to wait for the moment when the program brings to the final flowing procedure.
It only remains to include a restored smartphone, after which you can absolutely calmly and confidently use the perfectly working iPhone 4S.

The problem of solving the problem will be useful to those subscribers who put on their own jailbreak, or as a result of certain reasons, the flashing in RecoveryMode did not lead to success.

Each of the considered flashing options is absolutely valid, and should help solve the problem under consideration. The subscriber does not need to be afraid to independently carry out this process, since nothing is difficult in it. You just need to have the slightest skills in the use of a smartphone and be extremely attentive. Actions need to be performed in a strict sequence, and then the successful finale is guaranteed. The main advantage of the process is that it is not necessary to spend any money, as it happened in the service center. Despite this, a person receives a phone with a little bit of worst settings that the gadget service center provides. But if you still doubt your abilities, or for some reason, you failed to cope with the goal, it is better to seek professional help or at least consultation of specialists. You can do this in almost every area of \u200b\u200bany city.

The iPhones are now very reliable smartphones, as Apple makes a big focus on their quality, but it's still a technique and like any technique whether it is a computer, or a TV touch it tend to break. All these problems with the smartphone put you before choosing, attribute your smartphone to the service center, where you can contemplate a round sum or try to fix it yourself. This instruction is general and suitable for all iPhone models.

Let's deal with what the iPhone firmware is needed:

In the case of software failure.
If you need to establish the current version of the OS.
In the case when you forgot your password (not to be confused with the activation lock of the APLLE ID).
To create a clean system after changing the Device owner.

In this case, you can make very simple actions in order to restore your device to a working state, for this you do not need a programmer's knowledge is very simple. One of the simple ways to restore the iPhone is to reflash it, for this we will need a computer and iTunes. By the way, the same actions are made in the service center.

Before starting the process, do not forget to make Backup (backup) Your data is music, photos, contacts and other important information, because after the iPhone firmware all information will be completely removed.

Preparation in the firmware iPhone

Download the desired firmware version with expansion .IPSW.. For each iPhone model, different versions.

You can see the version of your iPhone very easily, in the firmware files (4S, 5S, 6S, 7, etc.), you usually indicate a set of letters and numbers that can be seen on the back cover of iPhone, for example: Model A1332.

There is a small problem of choosing the firmware, and it consists in what exists GSM. and CDMA Models that work in different cellular networks. Therefore, you need to choose a suitable model. Firmware for GSM. Not installed on CDMA.

After you have identified your model Download yourself on a PC firmware that is suitable for your gadget, here's the site where you can -

Important!!! Apple does not allow to reduce the version of the OS, however, there is a temporary interval window within a few weeks after the output of the official IOS update during which the previous version of the OS will be available to users.

Also an important feature is the ability to return to the last official version of iOS with a beta version installed on the device.

To begin with, you will need to go to the settings and disable the function Find iPhone Without this, you will not be able to flash your device, as iTunes will give an error. Download the latest version on the official website.

Firmware iPhone in action

There are two ways to flash an iPhone, through Recovery Mode. and Dfu Mode.. RCOVERY MODE, This is an emergency recovery mode. Designed to recover after the smartphone stopped working as usual.

DFumode. - carries out actions by way of OS iPhone and makes the firmware directly through Firmware.. Also this method is recommended to owners who Jailbreak.

IPhone Firmware via RecoveryMode

Turn off the phone and wait for the screen and holding the button Home Connect it to the PC. The computer recognizes a smartphone in recovery mode.

We run iTunes and wait when the program determines the iPhone you can get out such a window, click OK.

If iTunes does not react to click on the smartphone icon in the iTunes program and looking for item Restore iPhone Click on it holding the Shift key (for Windows OS) for Mac while holding Alt. Also in this menu there is such a function as an iPhone update:

File Manager appears before you, looking for our firmware and click Open. Next, iTunes will do everything yourself, waiting for the end of the download. After the download is completed, disconnect an iPhone from a PC and long press the button Power Turn off your smartphone. Then quickly press the button Power Turn on iPhone. That's all the iPhone is ready to use.

IPhone firmware via DFU Mode

We connect the smartphone to the PC and turn it off, then clinging the power and home buttons hold 15 seconds. Let's release the button Power Continuing to hold HOME until iTunes identifies the device in mode DFu..

Choose your device in iTunes.
In the control menu, we find the restore iPhone
Click on this item while holding down the SHIFT key (for Windows) or Alt for Mac
In the window that opens, select the file with the firmware open it.
We are waiting for the completion of the firmware process.
Turn on the device and usefully use.

This method is suitable for those who have Jailbreak whether anyone does not work out an iPhone through Recovery Mode..