WINDOVS does not start after installing RAM. RAM problems

Question: After replacing the RAM, the computer reboots

Hello, today I ran into such a problem, on this computer there was a 2 GB operational memory, today I bought 4 GB of RAM, insert, the computer begins to reboot
Motherland
G41T-M16.

Answer: aktogai95You need 4 GB memory with 16 chips .. on 8 on each side

Question: Problem After replacing RAM on a laptop

After replacing RAM on a laptop (there were 2 layers of 2 GB, 1333, 10600, DDR3, 1.5V, on 2 4 GB strips, 1600, 10600, DDR3, 1.5V, Kingsston), the computer turns on to download and reboots, then It proposes to include with the restoration of the system, and again before downloading and reboot.
Aser Aspire 5745DG laptop,
Processor: Intel Core i5-480m 2.66GHZ
On the old RAM, everything works fine.

Answer: Miron7999.
You must come up or memory.
Primary requirements:
1. 1066MHz PC3-8500,
2. 16 chips 256mx8, eight on each side of the module.

Question: Does it make sense to add random memory

Good afternoon, I want to ask a question about whether it is worth adding the RAM to the computer next configuration:
Pentium G840 Box Processor
Motherboard S1155 MSI H61MU-E35 (B3)
RAM DDR3 2048MB DDR1333 GOODRAM 2 strips (in total 4 GB of OP. Memory)
Video adapter PCI-X GeForce 450 GTS 1024MB MSI DDRS (N450GTS-MD1GD3)
On the computer there are 2 connections for OP.Pamyti, I want to put 2 4 GB strips for more productive processor work. Will the performance of the computer increase, if I change the RAM 4 to 8 GB ???
Thank you in advance for your response.

Answer:

Message from Danil6

Will the performance of the computer increase, if I change the RAM 4 to 8 GB ???

Not. The amount of memory will not improve the speed of the project.
There are use of resource-intensive applications (photo / video editors and the like) should be increased.
Memory does not happen much.

Question: After replacing the RAM, the laptop began to reboot (I did not find solutions on the site)

Hello! I ask you to help in solving this, have already had time to dare nerves, problems. So:
Laptop - Emachines 732ZG

The Kingston Sodimm DDR3 KVR13S9S8 / 4 RAM was acquired with the characteristics:
Memory amount 4 GB
Sodimm DDR3 Memory Type
Memory frequency 1333 MHz
Supply voltage 1.5 in
Effective bandwidth 10600 MB / s
Scheme of memory timings 9-9-9
Tobish, as it seemed to me, was to become like a native.
On the system was pre-installed Windows 7 32Bit. Immediately put the bar without replacing Windows, 2 slots - in one 2GB, in another 4GB. Everything worked, but as we know the 32-bit this volume will not be fully used. Then the attempt was to reinstall the Windows and came across the hanging of the OS installer at the start, thought the image is broken. Uploaded a couple more three and did not put one, it simply hung. Ok, inserted the old bar instead of a new one, put the 64-bit, disassembled the laptop and inserted a new one (on 4GB). The laptop began to simply reboot when attempting to load Windows, hide a new one, I started the OO. I tried to put in different combinations and in different slots did not help. Then, in brazen when the system turned on, I took out the old one and inserted a new one, as not strange, but Aida and CPU-s defined it, but Windows showed only the old RAM. Rebooted, did not give anything.
Zy.Gomogit please. I hope for you very much \u003d)
ZY. Thanks for the time spent on many letters)

Answer: DELETE94.,

We have, on your topic, I did a very good land.
I also do not understand the dependence on the chipset, because the memory controller in the processor. But, campaign, yonis78. Right!
Intel FIGS interrogate: " Maximum size Memory (depending on the type of memory) "- it would be better not what they wrote.

P.S.:
Why the fiber does not work, here you all won't write.

Added after 23 minutes
yonis78., Went in PM, what do you think about it?

Question: The computer does not start with the new rAM

Good day. The other day I decided to add RAM to the computer. But after installing an additional RAM module, the computer stopped running.

Here are my components:
Motherboard: ASUS P5P43TD Pro (IP43) S775 PCI-E 4XDDR3 6XSATA2-RAID 1xide Glan 1xltp 1xcom 1xps / 2 1xesata 1x IEEE1394 Sound ATX RTL
CPU: CPU Intel Core 2 Duo E7500 2x2930MHz-1066 3072MB LGA775
RAM: Dimm DDR3 2GB PC3-10600 1333MHZ Kingston

Bought an additional DIMM DDR3 2048MB PC10666 1333MHZ Kingston Retai
The consultant in the store said that this fee should work well in a pair with mine.

Please advice

P.S. In pairs, these two boards do not work, put a new one separately, it does not start with it either.

Answer: And I have the same problem. ASUS P5P43TD Pro Mother is working normally with KVR1333D3N9K2 / 4G memory, and does not work with KVR13N9S6 / 2 memory. And in the store of another memory and not. We'll have to look for used.

Question: The optimal amount of RAM

Hello!

I have the following configuration:
Motherboard: GA-P55-UD3L
Processor: Core i7-860
Memory: 2x2GB, DIMM DDR3, 1333MHz (PC-10600).
Video card: palit. GeForce GTX.960

In connection with the transition from x32 on X64 Windows 7, we consider the issue of increasing RAM.
The computer is used mainly for games.
Does it make sense to increase the volume to the maximum possible in my case 16GB (restriction of the motherboard) or 8GB or 12GB?
Is the difference between 8GB and 12GB from the point of view of the user?

With respect,
Sarger

Answer:

Message from qUWY

Here and look at system requirements their games how many they need, and then multiply this value to two

+
I also want to add that for toys, and indeed a lot of memory does not happen. I have already had 8 GB for 3 years ago. Right now this is already a little, you need to add to 16

P.S.: When choosing the volume of RAM, it doesn't matter what the rest of the iron is. Well, except that it is necessary to take into account the limitations of the RAM controller in volume, which may be either in the motherboard chipset or in the CPU.

Question: Replacing RAM on X79-UD3

Hello dear members of the forum!

There was a need to replace the RAM.
Maternal gigabyte board X79-UD3 Rev.1.0

Kingston KHX 1866C9D3 / 4GX memory - 4 4GB strips (generally 16GB)

I want to change on the HX324C11SRK2 / 16 - 4 strips of 8GB each (in total 32GB)
I change the dice and Siblok after 3-5 seconds. It goes to reboot, I can't get to BIOS.

Tell me what is the problem?

Answer: Today put the planks.
First one, and then the rest.
It started, only the character (timings and voltages) in the BIOS parameter) do not start the computer.
The same problem, a restart after 2-3 seconds, and does not allow to bios.

I also tried a setting through native profiles, only the last timing of overcame on 2.
2133- 11 13 15
2400- 11 13 16

Tell me the way to disperse, maybe through XMP to try?
It was the sticker "Intel XMP Certified"
Only I did not accelerate it through it.
Well, you can do through windows?
The computer does not hang?
Or she will automatically determine optimal settings?

Question: Replacing RAM

motherboard: Technology Co., Ltd., GA-MA770-UD3
Type x86-based PC
AMD processor Athlon (TM) II X2 240 Processor, 2800 MHz, nuclei: 2, logical processors: 2
Video Card NVIDIA 9500GT.
RAM One Plank 2 GB DDR2. (Samsung seems to be). Forbid to seek or somebody, too, also DDR2?

Answer: Why change if you can add.

Message from EVG.

you can just buy any DDR2. But preferably cultural producers

Question: RAM does not work

Ordered from China RAM KLLISRE DDR2 2GBX2. When you try to install the memory in both slots, the computer does not boot. Once hung on the bios screen. If you remove memory from the slot B, the computer is successfully started. When the memory is rearranged into the slot, the computer does not load, but if inserted into the slot and the cry on 1 GB in the slot, then the computer is successfully started. If you insert one bar per 1 GB in the slot B, then the computer starts. The ASUS M2N68-AM Plus. CPU AMD Athlon. 64 x2 4600+.

Answer:

Message from Momadin.

The memory earned at the tire frequency 333.

Thank God. Good thing started.

Message from Momadin.

I have another question about the difference between 800mhz and 667 MHz in performance?

Well, how do you tell? If processor-dependent tasks are performed - then the difference will be, of course. Percent of 10-15 may be. And if the processor is loaded not much - then the difference will be small.

Message from Momadin.

And it turns out my memory now works at a frequency of 667 MHz, although in CPU-Z it is written that 300.

This is a feature of the operational memory. On one moment of the signal, it transmits two pieces of information. Therefore, the frequencies there in different programs are shown different. In some, the number of physical impulses (300 in your case) is shown and in some - the number of transmitted pieces of information (multiply by two, it turns out)

Question: A computer does not work with a new RAM

Good day.
Help me please understand what is wrong. A week ago, I bought my two strips of RAM KINGSTON KVR16N11S8 / 4-SP to 4GB in the online store (Brand Star). I am very "lucky," on the day of the order they were in the store store, on joys threw all their works and went to the store, as soon as I bought, flew out of the store with the feeling of Euphoria and almost fled to the house with them. With this sense of joy quickly disassembled her computer, pulled out old planks, gently put them on the shelf and decided that I would take them to the cottage in old computer. He put the new, gathered a computer, put, with a smile to the ears, conveniently settled in the chair, pressed the power button ... And then the sense of joy immediately flew into oblivion, smile slipped from my inadequate face somewhere on the floor. The computer cyclically rebooted, not letting go to the BIOS. Not realizing what, I disassembled the computer and put only one new bar, with one bar, the computer loads and enters the BIOS, the computer is loaded only to windows logo And again, and again rebooted at the same place. Deciding that the problem in the OS found my old flash driveFor such cases, and started reinstalling Windows, put all the parameters in the BIOS went to load from the flash drive, the load logo and the BAM! Refrigerate. The timings set (11-11-11-24) ... nothing comes out. From anger spat, put old planks. I turned on the computer, I saw the desktop, turned off the computer. Dear friends And comrades, tell me, how to start this straight new RAM?

Kingston KVR16N11S8 / 4-SP

GENERAL CHARACTERISTICS
Memory type
DDR3
Form factor
DIMM 240-pin
Clock frequency
1600 MHz
Bandwidth
12800 MB / s
Volume
1 Module 4 GB
ECC support
not
Buffered (REGISTERED)
not

not
ADDITIONALLY
The number of chips of each module
8, one-sided packaging
Supply voltage
1.5 B.
Number of ranks
1
Timing
CAS LATENCY (CL)
11
Ras to Cas Delay (TRCD)
11
ROW PRECHARGE DELAY (TRP)
11

SAMSUNG M378B5773CH0-CH9

General characteristics

Memory type
DDR3
Form factor
DIMM 240-pin
Clock frequency
1333 MHz
Bandwidth
10600 MB / s
Volume
1 module 2 GB
ECC support
not
Buffered (REGISTERED)
not
Low Profile)
not
Timing

CAS LATENCY (CL)
9
Ras to Cas Delay (TRCD)
9
ROW PRECHARGE DELAY (TRP)
9
Additionally

Supply voltage
1.5 B.

ASUS P7H55-M Pro

CPU

Socket.
LGA1156
Supported processors
Intel Core i7 / Core i5 / Core i3 / Pentium
Support for multi-core processors
there is
Chipset

Chipset
Intel H55
Bios.
AMI with emergency recovery
SLI / CrossFire Support
not
Memory

Memory
DDR3 Dimm, 1066 - 2133 MHz
Number of memory slots
4
Support two-channel mode
there is
Maximum memory
16 GB
Disk controllers

IDE
Number of slots: 1, UltRADMA 133
SATA.
Number of SATA 3GB / S: 6 connectors
Expansion slots

Expansion slots
1xpci-E x16, 1xpci-E x1, 2xpci
Support PCI EXPRESS. 2.0
there is
Audio Video

Sound
7.1ch, HDA
Built-in video adapter
there is
Net

Ethernet
1000 Mbps
Connection

Availability of interfaces
12 USB, S / PDIF output, 1xcom, D-Sub, DVI, HDMI, Ethernet, PS / 2 (keyboard)
Connectors on the back panel
6 USB, Optical Outcome, D-Sub, DVI, HDMI, Ethernet, PS / 2 (Keyboard)
Main power connector
24-PIN.
CPU power connector
8-PIN
Extra options

Form factor
Microatx

Intel Core i5-661 Clarkdale (3333MHz, LGA1156, L3 4096KB)

General characteristics
Socket LGA1156.
Core
Clarkdale core
Number of kernels 2.
TECHTRACESSES 32 Nm
Frequency characteristics
Clock frequency 3333 MHz
System bus DMI
Coefficient multiplication 25.
Voltage on the kernel 0.65 B
Integrated graphics core HD Graphics, 900 MHz
Built-in memory controller is, strip 21 GB / s
Cache
Cache volume L1 64 KB
Cache volume L2 512 KB
Cache volume L3 4096 KB
Command sets
Support Hyper-Threading is
Instructions MMX, SSE, SSE2, SSE3, SSE4
AMD64 / EM64T support is
NX BIT support is
Support Virtualization Technology is
Additionally
Typical heat generation 87 W
Maximum working temperature 69.8 ° C.
Additional information Voltage on the kernel 0.65V-1.4B

NVIDIA GeForce GTX 650 Ti Boost (ASUS)

General characteristics

Type of video card
Office / game
Graphic processor
NVIDIA GeForce GTX 650 Ti
Interface
PCI-E 16X 3.0
Code name graphics processor
GK106.
TechProcess
28 nm
Number of supported monitors
4
Maximum resolution
2560x1600.
Specifications

Frequency of graphic processor
980 MHz
Volume of video memory
2048 MB
Type of video memory
GDDR5
Frequency of video memory
5400 MHz
Tire Blossomy Video Motion
128 bits
Ramdac frequency
400 MHz
Connection

Connectors
DVI X2, Support HDCP, HDMI, VGA
HDMI version
1.4A
Mathematical block

Number of universal processors
768
Shader version
5.0
Number of textural blocks
64
Number of rasterization blocks
16
Maximum degree of anisotropic filtering
16x
Maximum degree FSAA
32x.
Support standards
DirectX 11, OpenGL 4.3
additional characteristics

Support CUDA
there is
The need for additional nutrition
Yes, 6 PIN
TDP.
110 W.
Number of slotted
2

Answer: It is not planted, but one-sided. On your system, 4 GB bar will only work double-sided (memory chips are located on both sides of the module, 8 pieces on each side).

Question: A computer does not work with a new RAM

Good day.
Help me please understand what is wrong. A week ago, I bought my two strips of RAM KINGSTON KVR16N11S8 / 4-SP to 4GB in the online store (Brand Star). I am very "lucky," on the day of the order they were in the store store, on joys threw all their works and went to the store, as soon as I bought, flew out of the store with the feeling of Euphoria and almost fled to the house with them. With this sense of joy, I quickly disassembled my computer, pulled out old planks, gently put them on the shelf and decided that I would take them to the cottage in the old computer. He put the new, gathered a computer, put, with a smile to the ears, conveniently settled in the chair, pressed the power button ... And then the sense of joy immediately flew into oblivion, smile slipped from my inadequate face somewhere on the floor. The computer cyclically rebooted, not letting go to the BIOS. Not understanding what, I disassembled the computer and put only one new bar, with one bar, the computer loads and enters the BIOS, the computer is loaded only to the Windows logo and again, and rebooted on the same place again. Deciding that the problem in the OS found my old flash drive, for such cases, and began to reinstall Windows, put all the parameters in the BIOS went loading from the flash drive, the load logo and the BAM! Refrigerate. The timings set (11-11-11-24) ... nothing comes out. From anger spat, put old planks. I turned on the computer, I saw the desktop, turned off the computer. Dear friends and comrades, tell me how to run this straight new RAM?

Kingston KVR16N11S8 / 4-SP

SAMSUNG M378B5773CH0-CH9

General characteristics

Memory type
DDR3
Form factor
DIMM 240-pin
Clock frequency
1333 MHz
Bandwidth
10600 MB / s
Volume
1 module 2 GB
ECC support
not
Buffered (REGISTERED)
not
Low Profile)
not
Timing

CAS LATENCY (CL)
9
Ras to Cas Delay (TRCD)
9
ROW PRECHARGE DELAY (TRP)
9
Additionally

Supply voltage
1.5 B.

ASUS P7H55-M Pro

CPU

Socket.
LGA1156
Supported processors
Intel Core i7 / Core i5 / Core i3 / Pentium
Support for multi-core processors
there is
Chipset

Chipset
Intel H55
Bios.
AMI with emergency recovery
SLI / CrossFire Support
not
Memory

Memory
DDR3 Dimm, 1066 - 2133 MHz
Number of memory slots
4
Support two-channel mode
there is
Maximum memory
16 GB
Disk controllers

IDE
Number of slots: 1, UltRADMA 133
SATA.
Number of SATA 3GB / S: 6 connectors
Expansion slots

Expansion slots
1xpci-E x16, 1xpci-E x1, 2xpci
Support PCI Express 2.0
there is
Audio Video

Sound
7.1ch, HDA
Built-in video adapter
there is
Net

Ethernet
1000 Mbps
Connection

Form factor
Microatx

Intel Core i5-661 Clarkdale (3333MHz, LGA1156, L3 4096KB)

General characteristics
Socket LGA1156.
Core
Clarkdale core
Number of kernels 2.
TECHTRACESSES 32 Nm
Frequency characteristics
Clock frequency 3333 MHz
System bus DMI
Coefficient multiplication 25.
Voltage on the kernel 0.65 B
Integrated graphics core HD Graphics, 900 MHz
Built-in memory controller is, strip 21 GB / s
Cache
Cache volume L1 64 KB
Cache volume L2 512 KB
Cache volume L3 4096 KB
Command sets
Support Hyper-Threading is
Instructions MMX, SSE, SSE2, SSE3, SSE4
AMD64 / EM64T support is
NX BIT support is
Support Virtualization Technology is
Additionally
Typical heat generation 87 W
Maximum operating temperature 69.8 ° C
Additional information Voltage on the kernel 0.65V-1.4B

NVIDIA GeForce GTX 650 Ti Boost (ASUS)

General characteristics

Connectors
DVI X2, Support HDCP, HDMI, VGA
HDMI version
1.4A
Mathematical block

Support CUDA
there is
The need for additional nutrition
Yes, 6 PIN
TDP.
110 W.
Number of slotted
2

Any RAM problems are found not as often as with other components of the computer. But all the same, they happen and to this need to be prepared. When problems with the random memory make themselves felt, it can manifest themselves in different ways: again - "BSOD" (Blue Blue Screen of Death - blue screen of death), spontaneous reboot of the computer, "freezing", etc.

Note: "Blue Death Screen" looks approximately as follows.

It can appear not only during problems with rapid memory, but this is one of the correct signs that definitely "says" that something is wrong with the computer and requires a specialist intervention, i.e. - us! :)

If a rAM does not work, then there may be two options:

1. RAM burned out completely. In this case, when all the fans of the system unit are regularly rotated, but the system does not submit further signs of "life".
2. RAM failed in part (failures in one or more of its chips). In this case, the situation is not so obvious, the computer can successfully download the operating system and even for some time it is stable to work, but when trying to run any resource-intensive application will restart, "hang" or show "bsod".

In the second case, it is necessary to carry out full testing of RAM for errors of its work. This is done with special programs And today we will talk about one of them. Personally, she never let me down. Meet! Wonderful utility - " Memtest.».

This is what the testing process looks like in it:

To identify problems with RAM, the program sequentially starts eight tests, each of which loads the various sections, recording in them different valuesReading and checked with the standard. The progress of all these tests we can see in the right upper corner In the screenshot above.

If errors in memory are found when testing, they are displayed in red in the middle part of the window.

In the screenshot, it is clear that this module is already - not to live! :)

Problems with RAM are solved, as a rule, the replacement of its unstable module (normal work with it will not achieve anyway). Although some of them we successfully continue to use in your work. How? In the terminal clients, which we talked about in the article. " In this case, there is no active exchange with memory and if there are no appeals to its failure pages, it can regularly function for quite a long time.

As you can see, the MEMTEST program is very easy to use (testing starts automatically after loading), it does not require any additional settings And configuration and remarkably copes with your task.

I want to give you some tips, about the elimination of problems with RAM:

1. Always test the memory only with boot disk programs. If you run "Memtest" from under Windows, it can happen that by trying to contact the failure of the memory section, the program will cause windows reboot. Do you need it once again? :)
2. If you have several RAM modules installed, then testing all of them in the complex, it will not be possible to determine what particular module leads to failures. Therefore, we need to test them individually (pull out all the "unnecessary" slots and leave only one tested). And so it will be with everyone! ... module :)

That's all I wanted to tell you today about problems with rapid memory. By tradition, I give a link to download the program "".

Note: After downloading the archive, unzip it. You will receive the file "MemTest" with the "ISO" extension (this is the image image file). Now it will be necessary to record on the disk in the image recording mode.

After that, insert a CD into a computer tested, set the download to the BIOS from it and test the RAM.

I recommend you to always test RAM only from under DOS, since it myself uses no more than one megabyte of memory for my needs and all the rest of its space we can be tested. If we start the diagnosis of RAM problems from under Windows, then its particular part (occupied by the system) will be inaccessible for the test program and the procedure itself will not be so efficient.

A couple more words would like to separately say about the "blue death screen" (BSOD). It makes sense to stretch this material to a separate article, and here this information will be appropriate. So what useful information For myself, we can learn from this blue Screen? Note the photo below:

We are only interested in digital-lettering after the word "STOP". It is such a designation that can tell us in which direction to move when determining one or another malfunction. This applies not only to rates with RAM. The "Stop" error codes themselves - a great set (depending on the specific malfunction), but you can about navigate and save your time during diagnosis.

How do we understand in such a large number of error stops? Do not keep them all in my head! This is not necessary. For us, everything has long been done :) For example, there is one wonderful program "" (you can download it on the link), which contains their base and explanations of errors (in Russian). You only have to specify a specific STOP code and the program will issue all the necessary information.

We indicate our value: 0x0000007A

In this case, the code indicates us for problems with RAM. I know for sure because it is an example from my recent practice :) The program is able to update the error database from the manufacturer's website, so pay attention to the "update" item.

I would also like to tell about this moment: it is possible when installing operating system Have you seen a message similar to those shown in the screenshot below?

IN 99-T. cases of one hundred (one still will be spoken on the fact that installation disk really dirty or scratched) We are dealing with the same problems of RAM. Naturally, the name of the file that the system cannot be copied can be absolutely any, since it is at this stage that the installation is copied to the memory a large number of Data and some files are trying to sign up for its failure cells.

Now - several general recommendations so that problems with the RAM did not deliver anxiety to you remember that memory, like any other node, to which the voltage is supplied - heats up and its overheating can negatively affect stable work Systems in general.

Personally I decided for myself like this: a couple of small fans in system block - no problem! :) What do I lead to? The market presents various systems for cooling RAM. These can be either a cape radiators attached to both sides of memory chips, or are small cooling system systems that are equipped with fans and are fixed directly above the memory slots.

Here, for example, such a cooling system " Kingston Hyperx. Cooling Fan "I use it in.

In the disassembled state, this is an elementary children's designer, which needs to be assembled and fixed on white snaps of slots, spreading (in the direction of the specified arrows) aluminum fixtures of the device. The device is connected to one of the fan power connectors on the motherboard.

In addition, the device has a pleasant LED backlight :)

The situation is as follows: Very often, when assembling a computer, the RAM modules are installed in the nearest (to the processor) slots. If I see this, then, if possible, I try to immediately rearrange them away from the processor (third or fourth slot). Why do I do that?

According to my numerous observations, it is the first two of the operational memory connector that is most susceptible to dust. This comes due to the active processor cooling system (fan), which evenly distributes dust within 5-7 centimeters radius from it.

Already more than once the whole "repair", it would seem, seriously non-working machines I had to reinstall the memory into another connector (with the pre-cleaning of the latter).

Dust - the enemy of any electronics! Sometimes it can be accumulated inside a lot and is nothing, and sometimes the smallest of contacts and the complete inoperability of the entire system. Cleaning can be performed using a soft brush or tassels. As shown in the photo below:

Personally go through the deepening in the connectors, because it is there that there are electrical contacts. So that problems with the RAM did not annoy you in the future also clean the "tracks" on the module itself.

Personally, I use ordinary gum for this.

Thoroughly wipe all the conclusions (move the gum parallel to copper contacts in the direction indicated by the arrow) and you will notice that the contacts immediately became lighter, and therefore, and electric contact - it is better. Install the RAM away from the CPU cooling system and let your computer work for a long time and without failures :)

P.S.. I thought and decided to supplement the article a little more. The topic, it seems, not related to the problems of RAM directly, but I hope it will be useful to readers. What program will you record "ISO" the image that I posted above? If you answered - "Nero", then - read the text on :)

I used to use the following software, but then began to notice that his distribution with each new version All increases and increases in size. And it came to the paradoxical situation: in order to simply burn the disc, I needed to install a 300 megabyte software package to my computer!

Realizing that it cannot continue so, I began to look for an alternative for myself. I found it in the form of a wonderful crumb called "IMG ItemProp \u003d" Image "Burn". Its size is a little less than two megabytes. Perfectly writes discs and I had a case when she (without extra questions) recorded me the image of a CD disk in 800 Megabyte on DVD DiscWhile our "folk" three-hundredth package was required for this "complex" operation of some additional plugin :)

So, without further unnecessary words, I sincerely recommend you this crumbling-assistant "".