Installing Windows 7 on an empty hard drive. Installing Windows on an empty hard drive. Login to the system

In this article we will look at how to install the operating windows system 7 from disk. The instruction was prepared as visualized and affordable even for beginners.

The entire process of installing the "seven" will consist of the following steps:

BIOS setup To download the computer from the boot disk;

Recommendations on the partition hard disk;
Definition of a system partition;
Installing Windows 7 I. initial setting.

Step 1. Setting up the BIOS to load a computer from the boot disk

If you do not know how to upload from the disk, following the link, you will learn how this is done:

Step 2. Starting installation

Coming out of the BIOS after saving the settings made, there will be a reboot of the computer and if anyone has already been installed on it operating system, After some time, the message "Press Any Key to Boot from CD or DVD" appears on the screen (press any key to download from the CD / DVD disk) what you should be done.

Be careful, as you will have only five seconds to enter the installation of the system. If the current operating system is loaded, it means that the ability to start the installation was missed and reload the computer to the next attempt.

If you install the system on new computer or clean hDD, then you will not see the previous window installing Windows 7. Start automatically.

So, if the computer started loaded with installation diskYou will appear on the screen to start setting the system in which you can see the process of loading the original necessary files.

If this window does not appear, and the loading of the old operating system began (if it was installed) or there were reports that boot disk Not found (in the case of installation on a new computer or hard disk), then this means that your computer failed to boot from the disk and it is worth returning to the previous step on setting the BIOS.

After downloading the basic files, you must appear the settings of language parameters, date and time format, as well as the keyboard layouts, in which the default parameters for Russia will be installed.

The recovery item may be useful to you in the future, in case of problems with the installed system, for example, due to damage, delete or unauthorized changes in its system files. As a rule, this leads to the unstable work of Windows 7 or the failure to load at all. In this case, you can restore the initial system files From the installation disk with the cover of the aforementioned item.

In general, the "Restore System" section in Windows 7, a fairly powerful tool for correcting various kinds of problems arising during its operation, and we will defy the individual publication to him, and within the framework of this article, we click the "Set" button to start directly to Installation.

After a few minutes, you will appear in front of you with a license agreement, the condition of which must be taken by installing a tick in the proper item and clicking the "Next" button.

In the next window you have to make a choice of installation type:

As you can see, here we can choose two options: update and full setting. If you can use the update item, if you want to update your old operating system on Windows 7, while saving all installed programs and settings. True for this, the installation of "seven" must be launched directly from your already installed OS. It should also be remembered that this is possible only from WindowsVista, and to the operating systems of older generations, including Windows XP, the update is not applicable. In general, this type of installation is not the most successful solution. The fact is that the new Windows is moving not only the settings of the previous system, but all its problems, brakes and glitches. Yes, and in general stable work Systems and earlier installed programs In this case, not guaranteed. therefore preferred type It is a complete setting, which should be selected.

At the next stage of installation, we have to choose the partition on the hard disk to install Windows 7. Here, I would like to make a small digression and bring some useful recommendations By splitting the hard disk to system sections:

Do not assign all the hard disk space for one single section. This may take a lot of trouble in the future.
Modern hard drives have sufficiently large containers for storing data and therefore it is advisable to split them into several thematic sections.
Recommended for the installation of the operating system and the necessary software dive separate section And do not score it with your personal data.
Choose the size of the system partition follows with a margin, given that for correct windows work15% of the place of this section should remain free.
Do not create too many sections. This will complicate navigation and reduce the efficiency of the distribution of files and large folders

Step 4. Definition of the system partition

Now, let's go back to the installation. From this point on, the installation of the installation can go in two ways:

Option 1: You have a new computer and a hard drive has never been distributed. In this case, the following window will appear in front of you:

To split the hard disk to partitions, select the item: "Disc Setup". In the above options, select "Create" and enter the required section in the window next to the window. It should be remembered that the size you must point in megabytes. Calculate it based on the fact that 1 gigabyte \u003d 1024 megabytes. As a rule, for Windows7 and related software, it is enough to 60 - 100 GB, but you have the right to do it and more if necessary.

When specifying the desired size of the future system partition, click the Apply button. Next, to use all your capabilities, Windows to create an additional section for it. Do not be scared, it will take only 100 MB of free disk space and will be invisible for you.

By clicking "OK", we will return to the section selection screen for installing Windows.

As you can see, there have been changed here. Now we have a section reserved by the system for our own needs, the newly created section and the remaining unintended area. From an unoccupied disk space, in the same window you can create additional partitions in the same way that we used above, and you can postpone this action for later and finally place your drive already in Windows.

Having received the right solution, we allocate that part of the disk to which we plan to install the operating system and click "Next".

Option 2 - If the operating system is already installed on your computer. Then your hard disk is already distributed to the logical areas, and you will see the window with the listing of all the sections found on it, for example:

Attention! All further manipulations with the found partitions can lead to the loss of your data, so be very accurate in your actions.

If the current partitioning of the hard disk does not suit you, you can delete the existing partitions in whole or in part by selecting the appropriate part of the disk, and then the "Delete" option. After this, the unintended place on the disk formed after this, you are entitled to break down at its discretion to the above method, discussed in Embodiment 1.

If the current disk markup is completely satisfied, then you need to decide which existing sections You will install Windows 7 and whether you want to save the information existing there. In this case, before moving on, let's first get acquainted with possible options Installations, after which you can already take a thoughtful decision, not a finger in the sky.

You chose the section on which this moment Your old operating system is installed, and the data stored on it is planning to save. In this case, after pressing the Next button, before starting the installation, you will see a warning window that the previous copy of Windows with all its files and folders will be moved to the Windows.old folder. The rest of the information will be untouched. By clicking "OK", in the warning window, you will run the installation process.

There is one significant disadvantage in such an installation. As a rule, after long-term operation of the operating system, the section on which it was installed is very mild and contains quite a lot. unnecessary files. Enhancements to all of this also a new operating system with related software, you will come across at least with an irrational use of a hard disk space, file defragmentation and even possible overflow, which will undoubtedly reduce the speed of the system.

If you chose a segment of a hard disk system as a future system partition, and you want to save all the stored information on it, the setting will start immediately after pressing the Next button.

If you plan to install Windows 7 to a clean partition (preferred option from all) and you have already saved information on it elsewhere else, or you do not need it, then before installing it should be formatted. To do this, select "Format". The installer will display a warning that this section may contain important data for you and they will be destroyed.

After pressing the "OK" button, the selected part of the disk will be fully cleaned from the information stored there and to start the installation only to select the "Next" item.

Step 5. Installation and Initial Setup Windows 7

So, after selecting the system partition, the system installation process will begin directly, during which the files will be copied and unpacking, installing components and updates.

During installation, your computer will be automatically rebooted several times, and the whole procedure can take from 10 to 30 minutes, depending on its power.

Finally, after completing the installation and the next reboot of the computer, the first window appears before you. initial setting Windows in which you will enter the username (your name account In the system) and computer (name under which it will be visible on the network to other users).

On the next screen, you can create a password for your account or postpone this action, leaving the fields empty and pressing the "Next" button.

The next step will be the ability to select automatic parameters windows updatesintended to regularly check over the Internet Availability of all kinds of security fixes of the system, critical updates and service packs on the official website technical support. Turning on automatic update It is desirable, but at this stage is optional, since you can perform a more flexible setting of this parameter after installation from the control panel.

After selecting the security parameters, the initial program windows settings Suggest checking the date and time setting. If everything is true, click "Next".

If drivers were installed during the installation process network cardyou will see the window network settingsin which you will need to select the location of your computer.

After you choose, a network connection window will appear and apply the parameters.

This initial system setup can be considered complete. After the final application of the parameters, the welcome window will appear before you, then the system will prepare the desktop, the appearance of which marks the completion of the Windows 7 installation.

Immediately after the installation is completed, you should install everything required drivers Connected devices.

Remember! After installing Windows 7, you need to log into the BIOS again and return the load from the hard disk.

In contact with

You need a clean installation or clean reinstalling Windows 7, C. full formatting Hard disk, but you do not know how to do it? Easily! We will tell everything in this article along the steps and with pictures.

Step 1

In most cases, the net installation of Windows 7 allows you to delete an existing operating system and replace it with a fresh, completely new Windows 7 operating system.

In other words, this process "erase everything and start from scratch", getting rid of garbage, viruses and bugs and problems accumulated over many years.

This article on how to install Windows 7 if:

You want to delete everything you have, and install a new, clean Windows 7
You want to reinstall Windows 7
You want to install Windows 7 to a new hard drive

This manual is broken by 34 steps and describes in detail all the subtleties of installing the net installation of Windows 7. Let's start ...

Backup and search for product key

The most important thing is to do before performing the net installation of Windows 7, it is to keep all the most important documents, music, movies, photos, etc.
You must also find the key windows products 7, 25-digit alphanumeric code.

Run the Windows 7 installation process

When you are positive that all the necessary data from your computer is successfully saved and recorded on other media, go to the next step. Keep in mind that as soon as you delete all the information from this disk (as we do this in the next step), it will be impossible to return the data!

Step 2.

To start the Windows 7 clean installation process, you need to restart the computer and boot from the DVD or from a USB device, depending on what media you have stored Windows installation files.

1. Insert the DVD or USB with Windows 7 into your computer and restart it.
2. You will have a black window (in the figure above) with a message to press any button to start loading with CD or DVD.
3. Press the key to make your computer download Windows 7 or USB drive disk. If you do not press the key, your computer will try to download from the next device in the loading order. If you have installed an old operating system, it starts uploaded.

Note. If this window does not appear to press the key, it does not appear, but simply loads your current operating system - then the reason is that the download is not configured in your BIOS external drives. In this case, reboot the computer, when you start the download, press the F2 or DEL key, go to the BIOS and in the section " Advanced Bios. Features ", go to the" Boot Sequence "and in" 1st Boot Device."We put the CD / DVD drive. (USB - Flash)

Step 03.

Wait until loads installation file. Windows 7.

Here we just wait until Windows 7 will complete the download of files when preparing for configuration.

Note. Currently, changes are not made to your computer. Windows 7 simply temporarily downloads the files needed for the installation process. You will delete everything on your computer at the next stage.

Step 04.

Wait until the Windows 7 installation program will complete the download

After Windows 7 installation files are loaded into memory, you will see windows screensaver 7, indicating that the installation process is about to begin.

At this stage you do not need to do anything.

Step 05.

Choose language and other settings

Select a language for installation, time format, as well as the default keyboard layout that you want to use in new Windows 7.

Step 06.

Click "Set Now"

Click the "Set Now" button in the center of the screen under windows logo 7.

Step 07.

Wait until Windows 7 starts up

Step 08.

Take conditions windows licenses 7

The next screen that appears is a text box containing a license for Windows 7 software.

Read the agreement, check the box I accept the terms of the license agreement, and then click "Next" to confirm that you agree with the terms.

Step 09.

Select the installation type of Windows 7

Click the "Custom Installation" button (Extended).

Step 10.

Disk sections for new Windows 7

On this screen, you will see every section that recognizes Windows 7. Since the net installation involves the removal of all sections associated with the existing operating system if it exists, let's delete them.

Important: If you install Windows 7 to a new hard disk, which does not have an operating system, you can go directly to step 15!

In the following few steps, you delete the partitions containing the operating system.

Step 11.

Deleting a section with a Windows available

Important. Before continuing, remember that deleting a partition will finally delete all the data from this disk - all programs, all the music, all videos, all documents, etc. Standing on this particular disk that you chose.

Highlight the section you want to delete, and click the "Delete" link.

Note. The list of sections can differ significantly from the picture shown in the picture. On my computer, I perform a clean Windows 7 installation to a 30 GB hard drive, which previously installed the old Windows 7.

If there are several on these disks hard disks and / or several sections, be careful, confirming that you delete the right section. For example, many people have two hard disk or sections that act as backups.

Step 12.

Confirm the deletion of the section

After deleting a section, installing Windows 7 will offer you to confirm the action.

Click OK.

Step 13.

Delete other sections related to the operating system

Windows 7 Clean Install - Step 13.

If there are other sections you want to delete, you can delete them.

For example, installed on my computer, installing Windows 7 previously created a special section of 100 MB (very small) for storing system data. Now this section becomes not necessary, so I also delete it.

Note. As you can see, the section we deleted on latest Chairdisappeared. It may seem that it still exists, but if you look carefully, you will see that the same space of 29.9 GB now has a signature - "unallocated space", and not a section.

Step 14.

Confirm the deletion of additional sections

As in step 12, installing Windows 7 will offer you to confirm the deletion of this section.

Click the OK button to confirm.

Important: As before, remember that all the data stored on this disk will be lost.

Step 15.

Select a physical location to install Windows 7

Windows 7 Clean Install - Step 15.

As you now see, all the space on the installed hard disk is unallocated. There are no sections on this computer.

Note. The number of displayed sections and whether these sections are unallocated parts of the hard disk, previously separated spaces or previously formatted and empty sectionswill depend on your specific system and sections that you deleted over the past few steps.

If you install Windows 7 to a computer with one hard disk on which you just deleted all partitions, your screen should look like the above, except for your hard disk.

Select a suitable retained space for installing Windows 7 and click "Next".

Note. You do not need to manually create a new section, and you do not need to manually format a new section. Windows 7 will do it automatically.

Step 16.

Wait for Windows 7 installed

Now Windows 7 will install a clean copy of Windows 7 to the place you have chosen in the previous step. Now you do not need to do anything but wait.

Depending on your computer, this process can take from 5 to 30 minutes.

Step 17.

Restart your computer

Now that the process of clean installation of Windows 7 is almost completed, you need to restart the computer.

If you do not do anything, your computer will automatically reboot yourself. You can also click the "Restart Now" button.

Step 18.

Wait until Windows 7 continues the installation

Installing Windows 7 after a reboot will continue.

Here you do not need to do anything. There are some more automatic steps to install Windows 7.

Step 19.

Wait until the Windows 7 installation program will update the registry settings

The Windows 7 installation program now updates the registry settings when preparing to the final stages of the clean operation of the operating system.

Step 20.

Wait until Windows 7 launch the necessary services

Wait until Windows 7 launches various necessary services.

This service launch will occur during each windows downloads 7, but you will no longer see this. Services are started in the background during the usual windows startup.

Step 21.

Wait for Windows 7 installation

Windows 7 Clean Install - Step 21.

On this last windows screen 7 "Complete installation" may take several minutes. All you need to do is wait - everything is automatically here.

If the Windows 7 installation process is completed, why are we only at step 21?

The remaining steps in this clean installation process include several simple, but important configurations that need to be performed before you can use Windows 7.

Step 22.

Wait until your computer is automatically rebooted.

Wait until the Windows 7 installation process automatically restart your computer.

Important. Do not restart the computer manually at this moment. Windows 7 installation program will restart the computer for you. If you interrupt the installation process, restarting manually, the clean installation process may fail. Then you may need to start installing Windows 7 from the start.

Step 23.

Wait until Windows 7 boots

Windows 7 Clean Install - Step 23.

Wait until Windows 7 is downloaded.

It does not require user intervention.

Step 24.

Wait until Windows 7 prepares your computer for the first use. Windows program 7 Now prepares your computer for the "first use."

Windows 7 now downloads drivers, checking everything is properly configured, and delete temporary files, etc.

Here you do not need to do anything.

Note. Remember that this clean installation of Windows 7 completely deleted your old operating system. Windows 7 is installed and configured in the same way as on a completely new computer.

Step 25.

Wait until Windows 7 checks the video performance on your PC

Windows 7 Clean Install - step 25.

Wait until Windows 7 check the video performance on your computer.

Windows 7 should know how well your video card is working and the equipment associated with it so that it can correctly configure performance parameters for your computer.

For example, if your video system works too slowly, Windows 7 can disable features such as Aero Peek, translucent windows and others graphic functions operating system.

Step 26.

Select username and computer name

Windows 7 should know what user name you want to use, and how your computer will be identified on the local network.

In the "Enter Username" field, enter your name. You can enter one name, your name and surname or any other identifiable text you like.
Note. You can use the name that you have in your old operating system.

In the Enter Computer Name field, enter the name that will be displayed on the local network.

Note. Better Write a name using only English letters.

Note. If you need multiple users on this computer - do not worry, you can configure this option later.

Step 27.

Select a password to access Windows 7

Step 28.

Enter the Windows 7 product key

Windows 7 Clean Install - Step 28.

If your old windows 7 was licensed copy, Take and enter here the old key, if you do not have a key, remove the "Automatic" checkbox, leave the key box blank and click "Next".
Download Activation / Crack for Windows 7, you can in it described in detail the entire sequence of actions.

Step 29.

Select Windows Update

Windows 7 Clean Install - Step 29.

I recommend that you choose "Only Installing Important Updates". This parameter is the safest, since it does not allow Windows 7 to do anything with your data or on your computer, except when important security updates and stability are available.

Note. These settings can be easily changed in Windows 7 later.

Step 30.

Choose the right time zone, date and time

Windows 7 Clean Install - Step 30.

On the "View and Date" screen, select the correct time zone, "date" and "time".

Time and date, most likely, already correct, but be sure to check the time zone and change if necessary.

Step 31.

Select Network type

Windows 7 Clean Install - Step 31.

In the "Select Current Location of Your Computer" window, which you see now, Windows 7 asks where your computer is located so that it can configure the right network security - more reliable protection for public spaces and easier for private, such as home and work.

Select " home network", If this is your home computer.

Select "Public Network" if you have a laptop and you often use public Wi-Fi networks.

Step 32.

Wait until Windows 7 connects to the network

Windows 7 Clean Install - Step 32.

Windows 7 connects your computer to the network.

Here you do not need to do anything. All automatic.

Step 33.

Wait until Windows 7 prepares desktop

Windows 7 will now add all finish strokes to your clean installation.

Here you do not need to do anything. All these changes are performed automatically in the background.

Step 34.

Yours pure Windows 7 Ready to work!

It completes the final step of your clean installation of Windows 7. Congratulations!

Read also our articles about choosing:
—
—
—
—

If you need, you can download it. And the activator for it in.
Installing the Windows 7 installation is identical.

Very often, new computers are sold without a pre-installed operating system. And if you are the happy owner of such a computer, then you are worth the task of independent windows 7 settings. This task becomes more complicated by the fact that the new computer has a new hard disk, which is usually not divided into sections.

On a new hard disk, you need to create at least one partition to establish an operating system on it. I always create at least two sections on a hard disk ( c. C. and disc D.). In creating too large number Sections I mean I do not see: two or three times.

Why do you need to break the hard drive into several logical disks?

• First, under the installation of the operating system and the necessary software, it is recommended to divert a separate section and do not store personal data on it. Plus on system disk There must always be free space for Windows correct operation.


• Secondly, in the case of reinstalling the disk system and formatting C. - All information on it will be destroyed. And all that is on others sections hard disk - not suffer.

So, proceed to installing Windows 7., during which we share our new hard drive into several sections. To install, we need a boot disk or boot flash drive with the operating system.

Turning on the computer, first go in Bios. And tighten the boot from the disk, or from the flash drive (how to do it in detail described and). We insert our media into the computer, save all the necessary settings in the BIOS and reboot.

The Windows Installer Sheath will appear on the screen. It will start loading the required installation files:

After some time, a window will appear in which you need to select the system language and click "Next":

To start the installation, click the "Set" button:

In the next window, we accept the terms of the license agreement, putting the appropriate checkbox, and press "Next":

Then choose the installation type " Full setting”:

Because We install Windows 7 on perfectly new hard driveThe following window should appear before us:

In order to break the hard disk to the sections, press the button " Disc Setup". In the emerging options, choose " Create"And enter the desired section size next to the window. It should be remembered that the size is indicated in megabytes. In my example introduced 81920 MB. By specifying the desired size of the future logical disk, click " Apply”:

After that, Windows will ask for an additional partition for it. Do not be afraid, it will take only 100 MB of free space on the disk and in installed system It will be invisible. Click "OK":

After that, we will return to the section selection screen for installing Windows.
As you can see, there have been changes here. Now we have: 1) section reserved by the system for their own needs; 2) just we created the section; 3) the remaining unoccupied place:

From an unoccupied disk space, in the same window you can create additional sections. This is done in the same way that we used above. I highlighted this line - I pressed the button " Create"- And without changing the size, pressed" Apply". That's what happened:

After that, we allocate the partition of the disk on which we are going to install the operating system and press "Next".

The process of installing the system will begin directly during which the files will be copied and unpacking, installing components and updates:

During installation, your computer will reboot several times - at this moment do not press anything, just watch the installation under the installation.

After the installation is completed, several Windows 7 initial setup windows appear in front of you. Pass them and you will see a worker windows table 7:

That's all: on this, the installation of the operating system is completed.

A source ---

Let us consider in detail the installation (reinstall) of the operating system (hereinafter OS) windows 7 from the distribution that is located on a rigid disk of the computer. This method has some advantages - the installation is performed faster, as the speed of reading from the hard disk is higher and also excluded the errors reading the CD in optical drive. The Windows 7 distribution kit must be unpacked by any archiver convenient to you in the process of removing a section () disk, usually partition on D..

Let's stop by three options Installations:

Each of the options has its advantages and disadvantages that will be set out below. The total disadvantages are - the impossibility of applying on computers with UEFI (replacement of the BIOS Outdoor), which support GPT (new disk markup methods replacing MBR) and the impossibility re-launch Settings in the case of the errors you have approved, or detect the equipment malfunction during the installation process (in this case, you will have to resort to installation from a CD or flash drives).
Further descriptions refers to the installation of one OS, on a computer with one hard disk as when installing the second OS there are features, which is not included in the volume of this page of this page.
And so in order:

Installing Windows 7 from a hard disk from under the old Windows 7 OS.

• The inability to change partitions during the installation process (format partition C. We will not be able - the installation is not completely clean);
• The inability to start the installation with some damage to the current Windows 7 OS and the impossibility of setting some non-original versions of Windows (on the assemblies will pop up the message "Error Code: 0x8030002F");

In order to have enough in the section FROM Places for the new OS on it should remain free space for more than 16 GB (for a 32-bit system) or 20 GB (for a 64-bit system).
And so, - unpack any convenient archiver (for example, WinRAR) in the section (we used to talk disc) D. "* .Iso" image of a distribution.

Picture 1.

The distribution includes 5 folders and 3 files circled in the drawing. Here the Archive folder conventionally indicates the folders and user files available in the section, - they will not interfere with us. The main thing is to have enough on the site section (the volume of the unpacked distribution is about 2.32 GB).
To start the installation, start the file setup. (Appendix 110 KB).
The installation of Windows 7 begins, the sequence of which is almost no different from the installation from the CD.
But here I would like to stop on the selection features of the section to install Windows.

Figure 2.

Here you see the three main sections of the hard disk created at the previously installed Windows 7.

• Section 1 - 100.0 MB. Hidden - in windows Explorer He is not visible. The main purpose of this section is the storage and protection of the equipment and boot folder files, which indicates the computer running the Windows startup. Attributes of this section: System, active, main partition. This section may not be! Windows 7 when marking a free disk space Automatically determines the need to create this partition depending on the presence in the system active partition and the number of existing sections (based on the restriction - the main sections can not be more than four). The size of this Rada can be 100 ÷ 350 MB, depending on the editorial office of Windows 7.
• Section 2 - 99.9 GB. In Windows Explorer, you see it, like a disk C.. The operating system files and part of user files are located on it.
• Section 3 - 1763.0 GB. In Windows Explorer, you see it, like a disk D.. There are user files on it. In the case under consideration, we placed the Windows 7 installation distribution.

In this version of the installation with these sections, we can not do anything (including and format section 2), - select Section 2 and press the button Further.

Figure 3.

A prevention of "Windows installation" appears, which reports that "the selected partition may contain the previous Windows installation files. If so, these files and folders will be moved to the folder under the name "Windows.old". You can access the information in the Windows.old folder, but you can not use previous version Windows. " We agree, - press the button OK..
The installation of Windows 7 is continuing, as a result of which in Section 2, new files and folders of the new Windows 7 OS will appear, in section 1 (if present) files and folders will be rewinding.

Figure 4.

At the end of the installation of Windows 7, opening in Windows Explorer local disk C. You will see files and folders located on it (in this case, the "Show" options are enabled. hidden files and folders) - including the aforementioned folder Windows.old. with files of the previous OS. You can enter it and the files you need to copy to save elsewhere. In the future, as unnecessary, you can folder Windows.old. Delete by running the disk cleaning program.

Running Windows 7 installation from a hard disk from the command line at the beginning of the old Windows 7 download.

The disadvantages of this option include:

• The impossibility of starting the installation with some damage to the current Windows 7 OS and the impossibility of setting some non-original versions of Windows (assemblies);
• OS should be one bit, 32-bit or 64-bit.

This installation option allows you to produce a "clean" installation with the removal of sections containing the old OS and the creation of them again.
And so, - we proceed from the fact that you unpacked the distribution in the root of the section next to the section from the OS (you can and then, it affects the choice of the letter in the command). To start setting, you need to run the distribution file setup.. eXEfound in the root of the section (do not confuse with setup.exe located in the Sources folder).
During the launch of the computer, hold the F8 key while running.

Figure 5.

When the menu appears " Additional options Downloads »Select" Troubleshooting Computer "(offered by default) and press the key ENTER.

Figure 6.

In the "System Recovery Settings", select the input method from the keyboard and press the button Further.

Figure 7.

Select a user if you have a password, we enter it. If not installed, then leave the field empty and press the button OK..

Figure 8.

Select the recovery tool - click on the option: Command line .

Figure 9.

Here you need to run two teams:

• Go to the section on which distribution is located;
• Start in this section file setup.. eXE.

Add in first command: "X: \\\u003e Windows \\ System32\u003e E.:» and press the key ENTER. Here you need to consider that in MS DOS, the letters of partitions do not coincide with those that you see in Windows Explorer (a hidden system partition in Windows Explorer is not visible - in MS DOS it is visible under the letter C.).
In the second team, add: "E:\u003e setup.. eXE"And press the key ENTER.
Do not be afraid to be mistaken - in case the error, the command is simply not executed with an error message.

Figure 11.

Press the button Set.

Installing Windows 7 from a hard disk from under any OS capable of installing a new MBR (main boot record) using the Bootice utility.

Any Windows must be running on the computer, which allows you to put an unpacked distribution in the "root" of any unpacked distribution and allowing you to start the Bootice utility. The Bootice utility is necessary for installation on the hard disk of the new MBR (main boot record).
The principle is simple, - during a reboot, the new main loading record you have started the OS installed on the rigid disk, and the BootMGR load manager is available in the unpacked distribution, which continues the installation of Windows 7, which flows further as when installing from a CD. During the installation process, the MBR installed is automatically replaced with the Windows 7 MBR.

And so we consider everything in detail.
In order to avoid errors and prevent the installation restriction, we turn off all extra discs - we leave only one hard disk.
We proceed from the fact that "* .iso" The image of the distribution is on the rigid part of the section D.. We unpack it with any convenient archiver to you (for example, WinRAR) in the "root" of the section (we used to say the disk). After unpacking, we need only three folders. boot, eFI, sources. and boot dispatcher bootmgr.- the rest in our "clean" installation is not involved ("* .iso" the image of the distribution is also not involved). Available in the section D. Your files will not interfere (the main thing is to have enough space), the new MBR when rebooting will start the download manager bootmgr. (We are lower and renamed it). In the same place or in an affordable place, you must place the Bootice utility file (size about 150 KB), - You can download it, for example, on this link.
After that you have disk files D. It will look like this (not used folders and distribution files are not shown):

Figure 13.

MBR type used to launch Windows 7 WindowsNt. 6 x.MBR.
To start the installation process of installing Windows 7, we need to restart the computer to restart the download manager bootmgr.. Make it by changing the main boot record of the hard disk MBR- on type Grub4dos.. We will do it with the help of the Bootice utility.
But there is one feature - Grub4dos requires the name of the download dispatcher file is not longer than 5 letters! Therefore the name of the download dispatcher file bootmgr. We have to shorten.

Figure 14.

The name itself does not play the roles, the main thing is that it is not longer than 5 letters and coincided with the "Grub4DOS configuration". So we rename it to Grldr.- In the fact that us later by default will offer the Bootice utility (Figure 17). Upon the next computer download, a new boot record will find on any section (and even logical disk) of the hard disk runs the download manager under the name Grldr..
So required files There is, - Run the Bootice utility.

Figure 15.

We have a hard drive, - he is visible in the "Disc appointment" field. To replace the MBR, press the button Put.MBR. Installing PBR does not touch.

Figure 16.

On the Master Boot Rekorder tab, turn on the option and click the button Mouth / shift.

Figure 17.

In the "Grub4dos configuration" window, we are convinced that the name of the Grldr file corresponds to us above the renamed boot dispatcher and press the button Save. on disk.
Then pressing the button Output (Figure 15) Close the Bootice utility.

Everything, - preparatory stage Made. You can start installing Windows 7!
Reboot your computer. During the download, the old OS will not start with us, since its main boot record is not already on the hard disk. Instead of her we have already been recorded Grub4dos 0.4.5c / 0.4.6A (Grldr.MBR)which will run the download manager file that has a new name Grldr..
The installation of a new OS is begins ... its order is similar to installation from a CD, we look.
With such an installation, you can delete the sections you do not need (naturally, except for a section containing distribution), - on their place to create new ones.

After reading all the above, you realized that the preparatory operations described in this method on the hard disk, you can turn off the computer, transfer the hard disk to another computer. When you turn on another computer with this hard disk, the installation of the operating system will immediately begin.

That is, if there is no CD Drive on the computer and nowhere to insert a USB flash drive, then please - you are a ready-made solution!

How to install windows on a clean hard drive?

Master's answer:

The new computers do not install the operating system. But if you purchased your own computer, you can install Windows yourself without programmer's participation. To do this, you need to purchase a licensed version of Windows.

When you purchase a version of Windows, consider the characteristic of your computer. If a rAM On your computer less than 2 GB, you need windows version XP SP3. If the memory of more than 2 GB is suitable for Windows Vista SP2, Windows 7 SP1.

A clean hard drive operating system is installed via BIOS. Enable your computer and insert a drive into the drive. Press the "F8" or "Deletee" key. On the screen will open menu Bios.. You need to open the download priority tab. The first place must be installed CD / DVD-ROM. Next install Hard Disc (HDD). When you press the "ESC" key, the system restart will begin and the computer will start reading data from the disk.

A window will appear on the screen from the installation menu. Select the option you want in automatic or semi-automatic mode. The root Windows files will be copied to the computer. Your hard drive has been clean before it. And so you must divide it on at least two virtual sections ("C" and "D").

Install your Windows to the C drive when you copy files, select the account name and password. You also need to choose the time zone in which you are.

When the installation process is completed, the operating system will start. The screen will appear on the screen. You will need to install drivers. You will remind you about the equipment installation manager. Exit the manufacturer's website and find the drivers for the video card, sound card, motherboard. Download them and restart the computer.