Installing Windows 10 from a hard disk. Installing the second Windows to another section or disk from the first Windows using WinNTSetup. Installing Windows to another disk section

The installation of each new Windows release is performed easier than the previous one and requires less effort from the user. With Windows 10 output, this task has simplified nowhere: now to install an operating system on a computer, no special knowledge and ingenious applications need. I don't even need the "Windows" distribution - the installation program "I learned" to download it myself. She itself creates an installation media - a DVD or flash drive. The user remains only to respond to requests and execute instructions that are understandable even to those who do this for the first time.

Today we will tell how the net installation of Windows 10 is held on any laptop and stationary PC. Under clean installation, the installation of the OS on the carrier, where there is no operating system (for example, on new computer or formatted hard drive). Or where it is, but is subject to complete overwriting without saving the installed software, accounts and settings. By the way, do not worry about the license: if you put the system in return for legally activated, it can be saved. And we will not hide from you what to do for this.

What you need

Recording loading media windows Distribution 10. They may be a USB flash drive on 3 or more GB, DVD, portable or internal hard disk. Since the absolute majority of users prefers to install Windows from a flash drive, consider this method as the main one.
or file set.
Utility for transfer system files on the installation carrier. If you are going to install Windows 10 on a PC with UEFI (advanced "BIOS"), without it you can do - the files and distribution folders are enough to copy to the USB flash drive. By the way, in Windows 8 and 10, the ISO image can be opened in the conductor as an ordinary folder, but in earlier systems it will be necessary for this. special application, for example, any program-archiver.
Computer on which you will cook blood flash drive.

Cooking a flash drive

If you do not have a pre-prepared distribution of "dozens", easier and more convenient to charge it to download Microsoft Media Creation Tools utility and write to the USB flash drive or DVD.

The utility does not require installation on a PC, just run it with administrator rights.

After launch Media Creation Tools:

In the License Conditions window, click "Accept".

To the question "What do you want to do?" Reply: "Create a media for another computer."

In the "Select Parameters" section, we define the language of the system, the release ("home for one PC" or "Windows 10") and the architecture (bit rate) - 64 or 32. If the selection options are inactive, the "Use recommended parameters" checkbox should be removed.

Further, select the drive: USB - to create a boot flash drive, or an ISO file - to download the image that you will record on the DVD in the future.

By selecting a USB device, press "Next" and we are waiting for 30-50 minutes, while the program downloads the distribution and creates an installation media. At this time, the computer is available for use.

It's time to go to the installation, you will be informed by the message: "USB flash memory device is ready."

If you downloaded a distribution in advance or you have no stable Internet access, use other tools to create installation media. For example:

RUFUS. Works without installing. To write the operating system on the USB flash drive, it is enough to specify the location of the distribution, as well as determine the scheme of the partition and the type of system interface: MBR for computers with BIOS (old), GPT for computers with UEFI (new, released later than 2013) or MBR for computers with UEFI ( If there are disks marked according to the MBR) on the PC with UEFI).

. This utility is as simple as RUFUS. In the "Add to USB Disk" section, it is enough to mention the "Windows Vista / 7/8/10, etc." item, specify the way to the image of the winery 10 and click the "GO" button.

Windows 7 USB / DVD DOWNLOAD TOOL. This Microsoft branded utility is capable of transferring all versions of Windows to USB flash drives and DVDs, starting with "seven", just 4 steps.

In addition to these there are plenty of other free utilities To create installation media. You can use any - the result will be the same.

We start setting

Installation options

Running windows installations 10 is possible in two ways:

From under the operating system. It can be used if you plan to reinstall or display the "dozen" from scratch to another disk section.
When loading from the installation media (via BIOS). A universal version that is suitable for installing the system to a new computer, and to reinstall the old copy of Windows.

When choosing the first option, open boot disk or flash drive in the explorer and run the setup.exe file.

When selecting the second - download the computer from the installation media.

How to upload a pc or laptop from a flash drive

BIOS SETUP utility on different computers It has a different interface. To enter it, it is necessary immediately after turning on the machine and appears on the manufacturer screensaver screen, press a specific key. What kind of screen saver window is usually indicated. Most often it is delete, F2 and Escape, sometimes F1, F3, F10, F12 or a combination of several keys.

Opening the utility, go to the "BOOT" section. In the BIOS version Setup Utilityshown in the screenshot, this is a separate tab in the top menu.

In other versions, it is not like that, and need settings Collected in the "Advanced Bios Features" section. In order not to confuse anything in the most responsible moment, study the BIOS interface of your computer in advance and disperse that and where is located.

In the "BOOT" section you will see a list of devices from which the machine can be loaded. In the first place is usually a hard drive. You need to make it so that first of all the computer checked boot files not on it, but on the flash drive. To do this, using the arrow keys, as well as F5, F6, plus and minus (the tip is located in the right half of the BIOS window), raise the USB device to the top of the list. To save the setting and exit the utility, press F10.

In the graphic versions of the UEFI, the order of devices is not needed, just click on the USB device. After that, the PC will restart and check the load from the selected media.

Main part installation

Most of the Windows 10 installation process takes place without active user participation. We'll have to work only at the beginning and a little at the end.

So, the first thing you have to do is choose the operating system language, time formats, monetary units, and key keyboard layout. If you downloaded Russian-speaking wINDOVS versionThe default here will stand Russian.

After defining language parameters, click the Install button.

Take the license terms. To go to the next task now and later click the Next button.

Now it is necessary to determine the type of installation - as an update or "selective" (in previous versions He was called "clean"). We, accordingly, need a second type.

Go to the selection of the place where "settles" new Windows. If the hard disk is not divided into partitions or you want to change their proportions, select the desired area of \u200b\u200bthe disk and click "Create".

In the "Size" field, specify the number of megabytes that you assigned for the system partition. 64-bit Windows 10 requires no less than 32 GB. Click "Apply". If necessary, create other sections in the same way, then format them.

Attention! If you want to install a system while saving a license, do not format the disk, and install the installation in the same section where the previous one is activated copy of Windows. The second important factor in conservation of activation - new system There must be the same version as old. If you install Windows 10 Ultimate instead of HOME, it will not work without losing a license!

After the end of working with a disk can relax - the next 40-60 minutes process will go without your participation. If you want, just watch it.

Approximately 1/4 of the time will take copy files.

Following the computer will reboot and continue the installation. The main part of the time on the screen will hang windows logo and rotate the "wheel". At what stage is the process, you can understand the bottom of the screen.

It's time to move to active actions again, because the installation is nearing. When you see the offer to increase the speed of work, click the "Use Standard Parameters" button. If you wish, you can change them later.

After upgrading you have to create a first user account. By default, administrative rights will be appointed. Here everything is simple - specify the username and enter if you need, password.

Finally - the long-awaited desktop. Everything is ready, the installation of Windows 10 is finished. We hope that she is not tired of you too much, because now you have to set up the network, design of the desktop, installation of applications and other pleasant troubles on the "coherent" of the new OS.

If during the installation of Windows did not require the entry of the license key, check if the activation is on the spot. Open the Start button context menu and go to the system parameters.

Activation Information is at the bottom of the basic information about the computer. In our example, it was not fulfilled, since the "dozen" was established in virtual Machine with full zero.

If you managed to reinstall with the license saving, you can delete the C: \\ Windows.old folder in which the files of the previous copy of the system are located. They no longer need - the activation information was successfully transferred to the new one.

How to install a system from a hard disk

There are situations when neither flash drives or DVDs do not refuse. In short, nothing but hard disk The same computer you want to install Windows 10.

To install "dozens" from a hard disk, you must comply with 3 conditions:

Have a distribution. More convenient - in the form of a set of files and folders. If you have only an ISO image, you will have to unpack it, for example, using the archiver application (WinRAR, 7-Zip and analogs) or windows Explorer (Only in the "eight" and "dozen").
Have an additional partition on a hard disk with a capacity of 3 GB. Preferably free.
The computer should be downloaded from the same disk. If not, you will need a carrier C Live CD / Live USB (Portable operating system), It seems like Bartpe, Alkid Live CD, etc. They are easily found on the network.

The installation file carrier will serve a hard disk, more precisely, its additional partition. The operating system will need to copy the distribution and creating its bootloader.

Installation order

Load a computer from a hard disk or carrier with a portable OS.
Copy Windows 10 distribution files and folders to the root of an additional partition (which is not in which the system will be installed).

Rename the download file (BootMGR), for example, in "Win10". The length of his name should not exceed 5 characters.

Now you have to create a distribution loader using the Bootice utility. Instead, you can use other download management tools, but we have chosen Bootice, as we consider it the easiest and most convenient tool.

Run the utility (installation it does not require). In the "Physical Disc" section, select the "DESTINATION DISC) list of a computer. Click the MBR control button (Process MBR).

Mark the "Grub4dos" item and click Install / Config (Install / Config).

In the "Rename GRLDR" section, write the new name of the Windows loading file 10 (as you remember, we called it "Win10") and click "Save to Disk). Click OK in the message about the successful bootloader and close the utility.

It remains to restart the computer. The next time you start, the control will receive the Windows 10 installation program, and then it will be the same as when installing the system from the flash drive.

Hi friends! My name is Vladimir and today I suggest installing Windows 10 to the USB portable hard drive, I assure you, it is very easy to achieve the goal we will need ISO- image of Windows. 10 and WinNTSetup3 program, and of course some of your patience.

No one will argue that the USB portable rigid disk looks like a much more convenient standard HDD, because it can be quickly disconnected from its computer and connect to another machine. A completely different thing is with the usual HDD, you first need to turn off the computer, disconnect the side cover system BlockThen disconnect the loops, unscrew the hard drive screws to the special basket. To connect the HDD to another computer, you need to do everything the same, only on the contrary. Moreover, if you need to connect the usual HDD to a laptop, then without a special adapter you will not work.

That is why the USB portable rigid disk has long been our constant life attribute, exactly as a flash drive. By the way, the usual USB flash drive can also be successfully replaced by portable HDD, this is exactly what we have been done in the previous article.

After reading this article, many users have a question, and is it possible to install the operating system on the portable hard drive, because Windows does not support the installation on USB drives?

Readers Questions:

I want to install Win 10 to my laptop with the second system, but after disconnecting from the disk C: unallocated space and creating a disk D: The laptop stopped loaded, I had to roll back to the factory settings. How to install win 10 on portable USB HDD?
I'm afraid to install the second operating system on my laptop hard disk, as you have to divide the HDD to the sections, but you want to try Windows 10. Are there ways to install Windows 10 to a portable USB hard drive except ?
When installing Windows 10, the USB portable hard drive is error:Installation on this disc Impossible. The installer does not support the configuration of the discs or installing on the disks that are connected through uSB ports or IEEE 1394. Why?

The easiest way to install Windows 10 to a portable USB hard disk

Connect the USB portable hard drive to a laptop with a Windows 8.1.

Install Windows 10 on a laptop with the second system.

We look at the laptop disc management:

Disc 0. - HDD laptop Acer.

Disk 1. - A portable rigid disk USB WD size 1 TB, is divided into two sections.

Aomei. Partition Assistant. Standard Edition

Download and install free program And launch it.

Select the first USB-hard drive section (I :) and click on the resizing button.

We shift the delimiter to the right release free space (60 GB) at the very beginning of the USB portable hard drive and click OK. 60 GB just enough to install Windows 10 (you can highlight more).

Click Apply And the program begins to work.

Progress of operation

We see the formed unassigned space of 60 GB, which we will be given to the installation of Windows 10,

Disc management

From the undisturbed area, create a section. Click on her right mouse and choose to create a simple volume.

On the portable USB hard drive, a section (G :) formatted in file System NTFS Size 60 GB. Install Windows 10 on it.

Open ISO-image Windows 10,

which joins the virtual drive ( H:).

WinNTSetup3

Introduced the program program.

Run the program and in the main window, in the first field ( Path to installation files Windows) click on the button Choose

in the operating window that opens, we find virtual drive (H :) With Windows 10 files, go to the folder H: \\ Sources and highlight the left mouse file install.wim., pm Open.

In the middle field ( The disc on which the bootloader will be installed) Everyone leaves as it is.

In the lowest third field ( The disk to which Windows will be installed) Click Choose.

In the conductor window that opens, select the section created by us ( G:) and click the button Selecting a folder.

Installation

Attention: if you have a laptop with a UEFI included, then in the field Use bootsect for bootloader Select UEFI.

If you have a computer with a regular BIOS, then select BIOS.

The Windows 10 installation process begins to the section (G :) portable USB drive disk and ends successfully.

Reboot your computer or laptop.

After rebooting, the operating system selection menu appears.

Select Windows 10.

There is a preparation of devices

Make later

We accept a license agreement

Connect to the router or skip this step.

Use standard parameters

Enter the name of the local account and click Next.

Windows 10 is installed on the USB portable rigid drive!

Disk management.

Windows 10 has a letter (C :) and works as it would be located on a conventional hard disk.

Windows 10 home for one language is activated!

30 days ago I updated Windows 8.1 to Windows 10 on this laptop and after windows updates 10 generated new key Activation, everything is written in this.

Now on this laptop two activated licensed operating systems: Windows 10 and Windows 8.1.

What will happen if disconnecting the portable rigid disk USB with installed windows 10 from laptop

The laptop will boot here with such a menu in which we will be offered, to boot to another operating system, press the key F9..

and we will boot in Windows 8.1.

Important note: If you connect our external USB drive to another computer or laptop, the system will not boot, because we have created a bootloader on the hard disk of the laptop.

If you want to have on external USB disk Portable operating system, then read these articles:

The problem with the storage of data over time arises from each user, and many solve it by purchasing an additional hard disk. HDD carriers are inexpensive, and they are great for storing a large amount of information. You can easily install several computers hard disksTo increase the available space, but it is necessary not only to insert a new solid carrier, but also to competently configure it. The computer does not see the hard disk immediately after it connects to the wires to motherboardAnd in the Windows operating system you need to make several actions to fix the current situation.

Why does the computer sees a new hard drive

The Windows 10 operating system does not allow you to install a new hard drive into your computer and immediately start working with it. Before you start using a new drive, it is necessary to check whether it works and is determined by the system. You can call a few reasons why the computer does not see a new hard drive:

The disc is incorrectly installed or incorrectly connected to the motherboard and power supply;
HDD does not work because of mechanical damage;
There are problems when determining the device by the operating system.

Make sure that the Windows 10 operating system sees the hard disk and you can proceed to its setting, quite simple. To do this, right-click on the Start button in the lower left corner and select the Lock Device Manager. Next, the menu opens in which you need to click on the left mouse button on the "Disk Devices" section.

Find the new ones in the list of available disks, which was connected to the computer, and check its status:

If it is not displayed, it is necessary to verify the correct connection of HDD wires with other components of the computer;
If it is standing red or yellow exclamation point, therefore, there have been problems with identification of the media, and they should be eliminated (most often in such a situation you will need to download individual drivers for your hard disk model);
If near new hard There is no extra bad icons, it means that it is connected normally and no problems were detected.

When the hard disk is connected normally, and the information about it is available in the device manager, you should switch to its configuration.

How to set up a new hard drive in Windows 10

Configure a new hard disk in the Windows 10 operating system is quite simple. If it is correctly determined, it is necessary to draw the following actions so that the drive becomes available for data storage:

If you plan to regularly use a new hard disk, be sure to do so that when working, otherwise the drive will quickly come into disrepair. If desired after initial settings You can always return to the "Disk Management" menu and create new volume On the hard disk, format it under another file system or change the drive letter.

Windows 10 has absorbed all the best from previous versions of Windows 7 and Windows 8.1. It is pretty beautiful, comfortable and fast. But it did not cost without flaws. The most significant of them are many errors in the work of the system, programs, games and self-removal of the application operating system, which it considers non-license, even some free.

Nevertheless, if you have enough modern computer Or a laptop, then with time, most likely you will still have to go to Windows 10, since the old versions of operating systems are gradually deprived of support from developers as the system itself and software developers.

Is it worth a hurry to update the system of pretty mediocre on today's standards of PC? Probably no ... since you have more problems than the use of updates - selection of drivers, glitches in the operation of the system and programs, etc. Yes, and in performance you are unlikely to win.

But the owners of licensed versions of Windows 7 and 8.1 are important not to notice the moment and make a free update to Windows 10, which is available until July 29, 2016. After this date, the update will not work for free.

If you like games and your video card supports DirectX 12, available only in Windows 10, then you will have to go on it to it, as it is designed to give an additional productivity gain. Although the games on DirectX 12 are unlikely to appear earlier than the middle of 2016, and even closer to its end.

But if you have a modern computer or laptop with not very successful Windows 8.1 and you want to plunge into the world of a more modern operating system, then why not? Make on external disk And forward to new technologies! In extreme cases, you can easily and quickly restore the previous system.
TRANSCEND STOREJET 25M TS500GSJ25M TS500GSJ25M 500 GB hard disk

2. How to download Windows 10

Using the "Media Creation Tool" utility, you can not only load the original image of Windows 10, but also create a boot disk or flash drive. You can download the utility in the "" section.

The utility allows you to download the version you need to download. recent updates. It works on Windows 7, 8, 8.1, 10 of any bit. Start the program on Windows XP and Vista will not work.

After the launch of the utility and acceptance of the license agreement you will be asked what you want to do.

The "Update this computer now" item is designed to update the Windows 7 or Windows 8.1 operating system already installed. But always better produce clean installation from disk or flash drive. To do this, select the "Create installation media for another computer" item.

To download the image from which you can install both the version "Windows 10 home" and "Windows 10 Professional" leave just Windows 10.

If the licensed "Windows 10 home for one language for one language" was installed on your computer or laptop and you just want to reinstall it without losing the license, then choose this option.

In the Architecture field, select the discharge of the operating system.

General recommendations are as follows. If you have 3 GB random access memory Or less, choose a 32-bit version. If 4 GB RAM and more, then - 64-bit. If you select the option "both", the universal image is played from which you can install both 32-bit and 64-bit Windows version. But the size of the image will be more than 5 GB, so it will require a two-layer DVD or a flash drive of at least 8 GB to record.
TRANSCEND JETFLASH 790 8GB

In the next window, it is proposed to select media for Windows 10.

If you install Windows C flash drives, you can leave a "USB flash memory device", this option will be the easiest and most reliable. Insert the scope of at least 4 GB and click "Next". At the end of the image download, the loading flash drive will be created automatically.

Note that all files on the flash drive are destroyed, so copy them in advance in a safe place (for example, to disk "D").

If you select the "ISO file", then it will be downloaded to the folder you specified and you can make a boot disk or flash drive at any time. Installing Windows From the boot disk is easier and more reliable than from the flash drive. Therefore, if you have a DVD drive and it works well, it is preferable to use this option.

At the end of the download you will be prompted to burn an image on a DVD. If you are planning to install Windows from a DVD, then insert a clean disk and click on the appropriate link.

Thus, using the "Media Creation Tool" utility you download the desired version Windows 10 and prepare a disk or flash drive from which you can install the system.

3. Creating bootable media

To install Windows 10 from the downloaded operating system, you need to make a boot disk or flash drive.

3.1. Creating an installation disk Windows 10

The easiest way to create an installation windows disk 10 Using the Astroburn program, which you can download in the "" section.

Run the program, go to the "Image" tab and click on the icon next to the "path to the image file" field.

Be sure to check the "Check" checkbox and click the Start Record button.

As a result, you will receive the Windows 10 installation DVD.

3.2. Creating a Windows 10 boot flash drive

Make boot uSB flash drive 10 can be using one of best programs "RUFUS" you can download in the "" section.

Connect the flash drive to the computer with a volume of at least 4 GB.
SanDisk Cruzer

Run the "RUFUS" program and click on the DVD drive icon.

Select the Windows 10 image and click Open.

Now it is enough to press the "Start" button and the creation of the loading flash drive will begin.

If you have on your flash drive valuable files, Copy them in advance in a safe place.

As a result, you will receive a bootable flash drive from which you can install Windows 10.

4. Download from installation disk or flash drive

To start installing Windows 10, insert the boot disk or flash drive and turn on or restart the computer.

The USB flash drive is better inserted into the rear USB connector on the motherboard without using a USB extension.

Immediately after turning on the computer, claps and hold the "Boot Menu" call key. It is usually indicated in the prompts on the initial screen download screen. On different computers and laptops, this can key from "F8" to "F12".

After the appearance of "Boot Menu", use the "down" and "up" arrows to the DVD drive or flash drive and press "ENTER".

If your computer does not even try to start booting from a disk or flash drive, then read our article. If the computer sees a flash drive and tries to boot from it, but it hangs or displays an error message, then read and make the loading flash drive in another mode.

5. Starting installation and selection of bit

Immediately after downloading from the installation disk or flash drive, you must see the offer to press any key to start installing Windows.

It must be done within a few seconds, otherwise the installation will not begin and the computer will need to reboot again. I usually click "Space".

In the installation process Windows Computer It will be rebooted several times, but no longer needed to press the key on the key, otherwise the installation will start first.

If you downloaded an image that allows you to install both a 32-bit and 64-bit version of Windows 10, then a screen with a choice of discharge appears.

Select the desired version with the Up, Up Arrows and press "ENTER".

Wait until the blue window "Install Windows" appears.

6. Configure language parameters

At this stage, it is proposed to select languages.

In the next window, click the "Set" button below the "Windows" logo.

7. Enter the key and select Windows 10 version

If this computer or windows laptop 10 is set for the first time and you have an unused key or used on this PC key from Windows 7, 8 or 10, then enter it and click the Next button.

If on this computer Or the laptop has already been installed Windows 10 (for example, by updating Windows 7 or 8.1) or you do not have a licensed key, you do not enter anything and click on the link "I do not have a product key".

Windows 10 has no binding a license key to the discharge of the operating system, as it was in the previous windows versions. You can, for example, update 32-bit Windows 7 or 8.1 to 32-bit Windows 10, and then perform a clean 64-bit Windows 10 setting and the license will be saved. But Windows 7 or 8.1 "home" cannot be updated to Windows 10 "Professional".

In the next window, you need to select the version of the operating system - "Windows 10 Professional" or "Windows 10 Home".

If you do not know why you are a "professional" version, then choose "homemade", as it contains less unnecessary components and will work faster. You can download the comparative table "Professional", "home" and other versions of Windows 10 in the section "".

In the next window, we put a tick "I accept the license terms" and click "Next".

We offer two types of installation of Windows 10.

"Update" - Selecting this type of installation will display a message about the inability to update when loading from the media (disk or flash drive).

Update Windows 7 or 8.1 to Windows 10 while saving files and installed programs (Or without saving) You can only running the installation program from under Windows. Now we will not consider this option.

"Selective" - \u200b\u200bsetting clean Windows 10 to a new or existing section hard disk. This type of installation we will consider in this article.

9. Disc setup

After selecting the installation type, a disk setup window will appear. If you have already installed some version of Windows, then there will be partitions with an old system.

Delete all sections except the largest on which your personal files are located (Disk "D").

In advance, take care of the safety of your files that were on the desktop and in the user folders like "My Documents", as they will be deleted with the old system. It is best to copy them to an external disk.

Then select "Unoccupied Space ..." to install and click the Next button.

If the disk of your computer or laptop is clean and there are no partitions on it, then create a section for the system of about 100 GB (102,400 MB) using the "Create" button.

SSD Disc It is better not to divide into several sections, but to completely give under the "C" disk to install Windows, programs and games. Then you will receive an unsurpassed computer speed!

Hard Drive A-Data Ultimate SU650 120GB

If the partition table of your disk has a MBR format, then the service section of 500 MB will automatically be automatically created in front of the Windows 10 installation.

If the partition table of your disk has a GPT format, then in the section for installing Windows 10, 3 official partitions of 450, 100 and 16 MB will be created.

Downstairs will still be "unoccupied space ...". Create another partition on it for custom files to the remaining place, select it and click the "Format" button.

Select Section 2 or 4 to install Windows, which has a slightly less than 100 GB, and click "Next".

Create and delete sections are quite simple, but if you have doubts, refer to our article on installing Windows 8.1, it is described in detail. If Windows 10 is not installed on the disk and inform about the error, then try.

At this stage, the files from the installation disk or flash drives are copied to the hard disk of the computer and then the installation will already take place from the hard disk.

Sometimes this process can dwell on 0% or in any other place for a while, and then quickly end. Show patience and do not touch the computer. If after 30 minutes of waiting nothing happens, then most likely the computer is free or installation disk Poor read. We will have to start everything first and when repeated hangs, it is possible to replace the installation disk.

After copying files, the computer will restart several times and the installation process will continue, requiring the user's participation. In the process of rebooting, each time a proposal can appear to press any key, but it is no longer necessary to press anything, otherwise the installation will begin first.

If you have not pressed anything, but the installation still starts from the very beginning, then remove the installation disk or flash drive, restart the computer and the installation will continue from the hard disk.

11. Setting parameters

At this stage, you can configure some windows settings 10 concerning the maintenance of the user.

If you do not want to bother, then click the "Use Standard Parameters" button, nothing terrible will happen. To view and change the settings, click on the "Settings" link.

It is advisable to disable all the options for connecting to the unknown Wi-Fi networks And sending error reports, it will increase safety.

Protection of the browser and the acceleration of his work is better left. But to use your computer to download system files by other users it is better to prohibit not load the disk and the Internet.

After that, the computer will reboot and the installation will continue.

12. Log in or Create an account

In the next window, you are invited to enter a login and password from your account Microsoft.

If you do not have such an account, it is proposed to use the link "Create it!". This account is attached to the Microsoft server and is needed primarily to synchronize the parameters of the system between multiple computers.

Personally, I do not like to bind an account to the Internet, since sometimes it causes it different problems and slowing down the computer. To create a local account, as in previous versions of Windows, click on the "Skip this step" link.

Now simply enter your name, preferably in English, and click "Next."

Password at this stage is better not to enter, but if necessary, set it later in Windows, after full setting Computer.

13. Completing installation and login in Windows

At the last stage installation program Ends up setting up the system and shows various messages on a brightness of the background.

It can take from 5 to 30 minutes. Take patience and do not touch the computer.

When you first enter the desktop, a proposal may appear to allow access to the computer from the local network.

If you have another computer or laptop and you want to share between them, allow access. If you do not have other computers, it is better to ban access, it will increase safety.

14. Activation and follow-up

If during the installation process you entered the right license key Or Windows 10 once has already been activated on your PC, the system is activated automatically when you first access the Internet.

In order to check the activation status, enter or change the product key, click on windows icon In the lower left corner and go to the "Parameters - Update and Security - Activation" section.

Here there is a "Go to Store" button to buy a license and legalization of Windows 10 on your computer.

If not to produce activation of Windows 10, the desktop will appear a reminder of the need to activate, it is impossible to change the color settings, and you can only install wallpapers using the "Photos" application.

15. Links

Below you can download all required files To download and install Windows 10, which I mentioned in this article.

Wait until Windows 10 is loaded and install, and.

Hard Drive A-Data Ultimate SU650 240GB
TRANSCEND STOREJET 25M3 1 TB hard disk
SanDisk Cruzer

Not even advanced windows users Surely once heard that there are several ways to reinstall this operating system: using a DVD and a USB drive. These two options are now most common among users. However, there is another one that allows you to implement a "clean" installation of Windows or its update to more new version Using the hard disk section. It can help in cases where there is no USB drive, no DVD to which you can write the image of the operating system. If you are interested to know how to install windows 10 from the hard disk partitionWe recommend that you read this instruction. Perhaps it will come in handy in the future.

Make sure you have:

ISO file with operating windows system 10.
EasyBCD and Ultraiso programs.
At least 5 GB of free space on the system section.

Installing Windows 10 from Hard Disk

Install EasyBCD and Ultraiso programs on your computer.
Start the "Disk Management" console. To do this, click on the Win + R keys, enter the DiskMgMT.msc command and press the ENTER key or on the OK button.
Highlight the system partition by clicking on it with the right mouse button and select "SHAT TOM" in the drop-down menu.
In the field opposite the item "Size of the compressible space (MB)" enter 6000, and then click on the "Compress" button. After that, in the "Disk Management" window, a new space should appear.
Click on the new space by right-click and in the context menu, select "Create a simple Tom".
In the wizard window, click on the "Next" button.
At the section "Formatting section" in the field opposite "Tom Tag" enter the name winsetup. And then click on the "Next" and "Finish" buttons.
After that, open the "Explorer", go to "Computer" and make sure that it appeared in it new section With the name that you asked and the volume of 5.86 GB.
Mount the ISO file of Windows 10, open the new section and copy files from the mounted image into it. If Windows 8, 8.1 or 10 is installed on your computer, you can click on the ISO file twice to mount it. If Windows 7 is installed on your PC, you need to use the Ultraiso program in order to open the system image and copy files from it to a new volume.
Run EasyBCD program.
In the Program window, select the Add Record section.
Click on the "WinPE" tab.
Opposite the inscription "Type" Select "Wim Image (Ramdisk)".
Opposite the inscription "Name" enter winsetup. .
Specify the path to the file "boot.wim". To do this, open the "Explorer" window by clicking on the icon with binoculars and the folder opposite the "path" field, expand Tom WinSetup, go to the "Sources" directory and already select "boot.wim".
Return to the "EasyBCD" program window and click on the "Add" button.
Go to "Edit Download menu" and click on the Save button.
Click on "Tools" and "Restart Computer".
On the OS selection screen, click on winsetup. , to start it windows Installer 10.

It is interesting, so you can install not only Windows 10, and also Windows 7, 8 and 8.1. If you have a desire to establish any of these OS, you will be enough to remove windows files 10, copy the files of the preferred system and specify the path to "boot.wim".