Sysprep was unable to complete the installation process. Unable to complete the windows installation process. Windows Setup was unable to configure Windows to work with hardware

Those users who downloaded the official installation image operating room Windows systems 10 are of course familiar with the special with the Media utility Creation Tool... This is a proprietary Microsoft tool designed to create bootable media to install and update operating system... But sometimes you may have a problem when launching the Media Creation Tool. For example, the error "Setup was unable to start correctly, please restart your computer." Or the application does not start at all. There may be several reasons for this phenomenon.

The most common reason is that the Media Creation Tool does not work due to the fact that it is incorrectly recognized by your security system and blocks any suspicious activity. Therefore, it is worth starting with what to disable antivirus program and a firewall (firewall).

Checking the work of Media Creation Tool. Did not help? Move on. Next possible reason- your account there are not enough rights to run the program. Try right-clicking on its icon and in the menu that appears, select "Run as Administrator". Alternatively, you can try to create another account Windows entry with administrative rights and try to see if the utility will start now.

The next reason why Media Creation Tool does not work is problems with local area network... Try the following. Run Command Prompt as Administrator. Then enter the following commands in turn: ipconfig / release Release the IP address if it is obtained from the DHCP server automatically.

Then: ipconfig / renew This will renew our IP address.

And finally, clear the DNS cache: ipconfig / flushdns

Now you need to check that you have access to the Internet and then check the operation of the Media Creation Tool.

Another way that sometimes it also turns out to fix the problem when starting the Media Creation Tool is to clean up temporary system files. To do this, you need in the address bar Windows explorer register the following address:% TEMP% Press the "Enter" key. The folder where the temporary files are stored will open software that works or has worked on the system. It looks something like this:

We completely clear its contents and reboot. Well, if the Media Creation Tool does not work after that, then the only way out is to download the installation image and create boot disk on another computer, and then go to this one and reinstall the OS.

set-os.ru

Windows 10 Technical Preview Build 10049 Available Now!

And again we get a new build on the Fast update channel! The company has indeed moved to a faster update scheme. The new build was numbered 10049 and is available for download from the Center Windows updates.

Recall that the previous build was numbered 10041, which means that the current build received only minor changes and improvements, after all, just over a week has passed. But, in this assembly for the first time included new browser Spartan!

This assembly, as usual, is not without errors. Of the well-known, it can be noted:

• After logging in, you can see blue screen instead of the desktop. Lock the computer with the hardware button, or press the Win + L key combination and re-enter the system. You can also try opening the Task Manager with the Ctrl + Shift + Esc keyboard shortcut.
• Checking for new messages in Outlook does not work
• It is impossible to run on this assembly virtual machines Hyper-V. This bug will be fixed with an update on the Slow channel.
• Doesn't work stably Visual Studio 2015. Emulators, XAML designer do not work. This issue will also be fixed with an update on the Slow channel.

Well, happy update! And if you are going to wait for the images, they will be uploaded in a few hours!

Write your feedback on the new build in the comments. You can discuss it both in the VKontakte group and on our forum.

Download / Download:

Windows 10 Build 10049 Pro Russian 64-bit:

Windows 10 Build 10049 Pro Russian 32-bit:

Windows 10 Build 10049 Pro English 64-bit:

Windows 10 Build 10049 Pro English 32-bit:

Attention! The file size is indeed smaller than usual. This is due to the fact that they converted to obtain an image not from install.wim, but from install.esd. This is the difference in size. Installation from these images is carried out as usual, which was verified by the portal administrators.

Found a bug? Select it and press Ctrl + Enter

thecommunity.ru

Windows Setup was unable to configure Windows to work with hardware

When restoring the system to a new one HDD disks restore the architecture and content of the partitions are restored to the factory state. But the moment is the beginning Windows installations (Windows preparation to the first launch) the following happens:

Installation of equipment -100%

MESSAGE:

"Windows Setup was unable to configure Windows to work with the hardware on this computer."

I click OK, the computer restarts, the installation starts again ...

and again everything stops,

MESSAGE:

“The installation process could not be completed. Restart the installer to install Windows. " Click OK, the installation starts again

and again everything stops

MESSAGE:

“The installation process could not be completed. Restart the installer to install Windows. "

All you need to do when you see the message “Windows Setup could not configure Windows to work with the hardware on this computer” or “The installation process could not be completed. To install Windows, restart the installer "so do not click the" OK "button

But press the key combination a black window will appear with command line... In it, you need to register the path to the executive file and run it. The file is called msoobe.exe and the full path to it will look like:

C: \ Windows \ System32 \ oobe \ msoobe.exe

When installing on a laptop, you must also press the FN key

A window should appear prompting you to enter the account name.

P.S. By the way, everything will work if your computer really supports Windows 7, although most likely it is.

You are trying to install an update on Windows 10, but a notification is displayed that it cannot be completed, after the system starts to undo the changes. Let's learn more about how to fix this error.

Errors that cannot complete the installation are not new to users. Many have encountered an error in Windows 7, in which the system notifies that the updates could not be completed, and then the process of undoing the changes starts. Since some time, more and more users have seen this problem in Windows 10.

The system downloads the updates correctly and displays the information that they are ready to be installed. If you ignore the installation, then after a while the OS will "throw out" a notification that it is necessary to update Windows, offering to restart the computer to complete the operation.

And this is where the problem begins. The update is theoretically installed, but at some point there is a warning about a possible failure. A notification "We were unable to complete the updates" appears, and below the screen displays "Canceling changes" - Windows 10 begins the uninstall procedure and rolls back the system to the state before it was installed. And so over and over again, every time you try to update the OS. How to fix?

Method number 1. Windows Update Troubleshooter

To get started, you can use the Windows 10 Automated Troubleshooter. It's an official downloadable tool from Microsoft. The utility diagnoses system area for the presence of faults in it, and then tries to solve them using basic methods. The effectiveness may be less or more, depending on the problem, but it is always worth giving this program a chance when we start solving problems.

Download troubleshooting tool

Once downloaded, launch the utility and follow the instructions on the screen. The program will automatically search for problems and then try to fix them.

If a notification appears that "" has been restored, you can try updating the system.

Method number 2. Clearing the SoftwareDistribution folder

The SoftwareDistribution folder contains update installers. The problem could be due to the fact that they are damaged or a compatibility error. Therefore, it is worth deleting the contents of this folder and restarting the service.

To be able to do this, you must temporarily stop the service, otherwise file deletion will be blocked.

Press the Win + R keyboard shortcut and enter the command:

Find the service in the list, right-click on it and select "Stop". The service will be suspended.

Press the Win + R keys again at the same time, enter the path to the directory below and press Enter:

C: \ Windows \ SoftwareDistribution

All contents of the SoftwareDistribution directory must be deleted - it must remain empty.

After deleting all files from the folder, open the list of services again (enter the command "services.msc" in the run window), find, right-click on it and select "Run".

Now try updating your system.

About a month ago, a friend brought a laptop with a broken operating system. I did not ask an unnecessary question about what exactly happened to the laptop, but it did not want to boot. Unfortunately, I can't remember the error now. Since she did not need the data on the hard disk, "and to be honest, there was nothing there except the operating system," I connected usb flash drive, and proceeded to install the operating system.

The installation of the Windows 7 operating system took place in a calm and normal mode, but at the very last stage (at 100% installation) an error suddenly popped up: The Windows setup program was unable to configure Windows to work with the hardware of this computer (Unfortunately, I did not take a photo)


I did not attach much importance to this error, and the computer rebooted. As it turned out a little later, Windows 7 refused to boot.

Once again I had to reinstall the system, but alas, just before completion, I get the same error "Windows Setup was unable to configure Windows to work with the hardware on this computer.".

First solution

During Windows installation, as soon as popped up given error, do not click the "Continue" button. Press the SHIFT + F10 key combination on the keyboard. You will be presented with a command prompt window.

We need to go to the folder C: / Windows / System32 / oobe / and run the application msoobe.exe... To navigate between folders, use the command CD... Just follow all the steps as in the picture, and you will start Windows setup.

Cd /
- cd Windows / System32 / oobe / (Use backslash instead of /)
- msoobe.exe

We fill in the fields, and we can in the usual way complete the Windows installation.

Second solution

At that time, I still did not know that the error could be related to the BIOS settings, but not so long ago I just ran into a similar problem... Front booting Windows I have

Some Windows users they like to reinstall the operating system when they cannot cope with the situation and find a solution to the problem on their own. For example, if an unsuccessful attempt to deploy an update, which caused the computer to switch to cyclic reboot followed by the message “We were unable to configure Windows updates. Undoing changes in progress ”or“ We were unable to complete the updates. Cancellation of changes. Do not turn off your computer. " The legs of one and the other are still growing with Windows 7 and they still cannot be chopped off in the top ten. But it is still possible to overcome them, and for this it is not at all necessary to demolish the system and install it anew. Enough to read this manual, which describes what to do if the OS was unable to install the Windows 10 update.

Clean up SoftwareDistribution folder with Windows 10 updates

Before installing updates, the system downloads them to a separate directory. In most cases, clearing or moving it helps to overcome the mentioned errors. This can be done both from under the system (if you have access to it) or using a USB drive with files for installing Windows 10.

Clearing the SoftwareDistribution folder in

This method is suitable if you managed to log in to the system.

Using a bootable Windows 10 USB stick to clean up SoftwareDistribution

If you cannot get into the system, then you will have to use the drive with files to install the operating system to clear the folder. there are several ways, but one way or another you need a second computer with a stable operating system.

After creation boot drive do the following:

Fixing the error Failed to complete Windows update by Update Center diagnostics

As you probably know, Windows has its own set of diagnostic and troubleshooting tools. You've probably stumbled upon it a lot, but never used it. Now you have a great opportunity to use it to solve a problem.

If you can't get into the system, then you should try another option.

Remove Duplicate Profile to Fix Windows Updates Failed to Complete Error

In some cases, the Windows 10 update installation process can fail due to a duplicate user account. Eliminate this problem the registry editor will help you. Be careful and do not touch anything unnecessary so as not to harm the system.

In the absence of any improvement after applying all the scheduled methods, you can try saving the data.