Iphone x will support HD sound. The iPhone X has a new standard ringtone (download). IPhone may be muted

As you know, any picture taken with the camera in the iPhone is accompanied by a sound that simulates the release of the camera shutter. This clicking sound is just a props and you might think there should be an easy way to turn it off. I hasten to disappoint you, but this setting does not exist on the iPhone.

If you constantly use your smartphone as a camera, then the presence of such soundtrack is not always convenient. In some cases, “clicking the shutter” with every shot will be simply inappropriate.

In this article, we'll show you how to mute the camera on your iPhone and take photos without disturbing others.

On Apple iOS devices, there are some tricks that can be applied to fix this problem. Below are a few ways to turn off / turn on the shutter sound of the camera on an iPhone.

These tips are universal and suitable for all models, so you can use them for any smartphone and tablet from Apple, regardless of the version of iOS that is installed on it.

Put your phone in silent mode

The easiest way to turn off the camera shutter sound on an iPhone is to use the mute switch located in the upper left corner. When activated, you will feel the vibration of the phone, and an orange stripe will appear on the button. Note that in silent mode, notification sounds, incoming calls and other functions are also disabled.

If you cannot find the switch, then your model may not have this feature or it is under the case. In this case, remove the protective case / cover from the phone. Oddly enough, this is the most primitive way to turn off the camera shutter sound on iPhones and iPads.

Decrease the sound level

What will you do if the mute button doesn't work? In this case, the most obvious solution is to reduce the sound level, but if you try to do this in the Camera application, then turn on the fast shooting mode.

If you intend to take a photo, lower the volume on your phone before opening the application. This can be done by pressing the corresponding button on the left side of the phone. It is located under the mute switch.

If you have already started the Camera application, you can reduce the sound level as follows. Swipe up from the bottom of the screen to open the Control Center, then swipe left to open the volume control. With it, you can mute the camera on the iPhone.

Mute shutter effect sound with music app

Another method has been discovered to turn off the camera shutter sound on iPhone, which works with iOS 7, iOS 8, iOS 9 and newer, without depending on the "Mute" switch. This is a workaround that involves playing the song, this is how it works:

1. Open the Music app and play a song, no matter what.

2. Now, use the volume buttons on the side of the iPhone and completely lower the song volume to zero.

3. After that, use the "Camera" application in normal mode - after that, when shooting, the camera will not make a sound.

There are also other ways to mute the camera sound on iPhone and iPad. They are a little more difficult, but still worth mentioning.

Use the Using Assistive Touch function

Turn on Assistive Touch and adjust the volume controls. To do this, go to “Application Settings” → “General” → “Access” → “Assistive Touch” (“Settings App” → “General” → “Accessibility” → “Assistive Touch”).

For convenience, add a Mute control button to the Customize Top Level menu. Now you can turn off the shutter sound before turning on the camera or while using it by simply tapping on the picture on your iPhone or iPad (iOS).

There are also alternative ways to mute the iPhone camera sound:

● The first method is rather funny, if it did not cause tears. Its essence is to take a photo while recording a video. You will not hear the shutter sound, but you will get a picture in lower quality (in the same resolution as the recorded video) and an unnecessary video file that you will have to delete in the future.

● The second method will not remove sound during shooting, however, it will not be heard by others. All we need is to plug in headphones (it doesn't matter standard wired or bluetooth) and take pictures.

I don’t think that wearing headphones will be a problem, since a large number of people cannot go about their business without music or an audiobook. However, if you are with friends, having your ears covered can be bad form.

● The third option is the most harmless and effective. After all, he will remove not only the sound of a click when shooting a camera on an iPhone, but also turn off all sound in principle. Just mute your audio player.

Alas, all these methods do not turn off the sound of the camera, without causing consequences for other systems. The only way to mute the camera on iPhone and iPad is to download a jailbreak.

How to remove camera sound on iPhone and iPad with jailbreak?

It is much easier to remove the camera sound on a jailbroken iPhone / iPad, as there are a huge number of applications for this that help you do this. A great example is the "StealThsnap" app, which turns off the camera shutter sound on the iPhone. You can download it to your iPhone, iPad or iPod.

Who needs the StealThsnap app?

Stealthsnap Cydia app allows you to mute the camera shutter sound on your iPhone. Its developer, Lex, is a talented newcomer to the cracking software industry. The application is very convenient to use for all models of smartphones and tablets.

How secure is the app?

The app is completely safe as it just changes the name of the photoShutter.caf file. This file in iOS memory is responsible for the camera shutter sound. After renaming the file, iOS stops seeing it and the soundtrack of camera triggering disappears.

When you uninstall the application, the file returns to its original state and the shutter sound reappears.

How to download the app?

If you live in a country in which the soundtrack of photography should always be on, then this application is a must for you. You can download Stealthsnap.

What else makes the app stand out is its awesome compatibility. It supports all versions of operating systems from iOS 1 to iOS 10.2. In the future, it will also be compatible with iOS 11 without installing any additional modifications.

Or iPhone X, then you probably noticed that the volume of the ringtone gradually decreases. At first, the phone rings loudly, but then the sound becomes quieter, and even when the volume is turned on full, it is still quiet.

Why does my ringtone sound quieter on iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, and iPhone X?

Don't worry, your iPhone is fine, and Apple actually intended it this way - "this is not a jamb, but a feature." However, if you want your smartphone to ring at the same loud volume all the time, here's how to do it.

First, let's figure out why the melody plays loudly on incoming calls, but then the sound starts to fade. In fact, this is one of the functions. It works even when you are not using a face scanner to unlock your device. The fact is that Face ID cameras always scan your face, regardless of whether they are used for authentication or not. Even if you do not use the scanner, it will still remain active to ensure the full operation of other functions, one of which is to decrease the volume of the ringtone.

How to turn off Ringtone Volume Down on iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, and iPhone X

To turn off ringtone fading, you need to deactivate the face scan feature, which detects whether you are looking at your iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, and iPhone X. display while the ringtone is playing and the ringtone sound will not become quieter. For this:

1. Open the iPhone application "Settings";

2. Open the section Face ID and Passcode;

3. Slide the switch opposite "Attention recognition" into position "Turned off";

4. Exit from "Settings".

After doing all of the above, you can check the volume by asking someone to call you. If the sound stays the same loud throughout the entire time, then you have succeeded. If you still feel that the iPhone is ringing too quietly, you can set the ringtone volume to maximum. For this:

Open the app on your smartphone "Settings" → "Sounds, tactile signals";

In chapter "Ringtone and message sound" move the slider to the right until it stops to turn on the maximum volume;

If you want to adjust the volume of the ringtone using the physical buttons, move the slider opposite the option "Change with buttons".

Some users deliberately turn off the ability to adjust the volume using the physical buttons, knowing the habit of their children to play with the device. However, many newer iPhones have this feature disabled by default.

If your iPhone 11, iPhone 11 Pro, iPhone XS, iPhone XR, and iPhone X suddenly lose sound, check to see if (the Mute switch located on the side of the device) is active. A small orange indicator on the switch will indicate activation of silent mode. Also check to see if the feature that mutes incoming calls completely is not enabled.

Sounds fresh!

Developer Guilherme Rambo discovered in the final version iOS 11.1 a new ringtone specially designed for iPhone X... The ringtone is called Reflection and it replaces the now classic intro ringtone, which was the default on the iPhone with iOS 7. In this news you can listen to the new iPhone X ringtone, as well as download it for installation on your iPhone ...

How the new iPhone X ringtone sounds

In iOS 7, the "Marimba" ringtone was replaced with "Intro". Although the difference between the sounds was huge, they were generally similar. The new iPhone X "Reflection" ringtone turned out to be different from Apple, which is fully consistent with the large-scale update of the iPhone itself.

The new ringtone will be available directly in iOS only on the iPhone X. However, downloading the sound and installing it on any other iPhone is no problem. The new "Reflection" ringtone is available for download by this link... Note that the ringtone is already in m4r format and you just need to download it to your iPhone and sync.

If the sound of an incoming call or messages has stopped playing on the iPhone, this does not mean that it is time to run to the service center. There is a chance that you have stumbled upon a rare, but not a single bug. A banal reboot or turning on / off the silent mode switch may not help, which is why try using our instructions.

What to do if there is no sound (disappeared) of an incoming call on iPhone

Despite the fact that the iPhone is a very reliable thing, sometimes users are faced with a sudden disappearance of the ringtone when making a call. There is an incoming call, but there is no beep, what should I do? Below we will tell you how you can fix this problem.

IPhone may be muted

In most cases, the ringtone stops playing because the iPhone has been put into silent (silent) mode. Of course, this explanation is very simple, but it is often the most correct one, especially for very “new” gadget owners.

ON THIS TOPIC: .

To fix this problem, check the volume switch on the left side of the iPhone. If the switch is on mute, just slide it, and when a call comes in, music will play again.

iPhone needs restart

If the volume switch is in the correct position, but the ringtone still does not sound, your device may need to be rebooted. A hard restart will fix software bugs that could have caused the ringtone to disappear. How to restart iPhone (4 ways).

No sound on incoming call on iPhone - Do Not Disturb is activated

If the ringtone on your iPhone stops ringing, check to see if Do Not Disturb is turned on. Users often mistakenly activate this mode without noticing it. If you see a crescent-shaped icon at the top of the screen, then you have Do Not Disturb mode turned on, which turns off all sound notifications.

Solving this problem is as easy as shelling pears. Swipe up from the bottom of the screen, open Control Center and turn off the mode. The beep should now reappear.

Check your sound settings

It is possible that problems with the ringtone arose due to incorrect sound settings. Open Settings, select Sounds, and set the ringtone and notification volume to suit your needs. Here you can also enable "Change with buttons", which will allow you to adjust the volume of the ringtone using the volume button on the left side of the iPhone.

No sound on incoming call on iPhone - headset mode is turned on by mistake

If you've tried all of the above methods, but none of them helped, then the problem is somewhat more complicated. For example, your iPhone may have remained in headset mode by mistake. This can be easily checked in the Music application or Control Center by clicking on the icon “ Devices ".

Try plugging and unplugging your headphones several times, gently cleaning the audio / Lightning connector with a toothpick, and restarting your iPhone.

Troubleshoot with AssistiveTouch

1. Open the menu Settings → General → Accessibility.

2. Go to the section and activate this function through the corresponding toggle switch. A dot will appear on the screen with additional menus, which can be positioned anywhere on the display.

3. Tap on the menu AssistiveTouch and select " Apparatus».

4. On the right there should be an icon “ Mute sound"With a crossed-out bell (if not, then put this function in this position), and on the left, tap on" Louder»To increase the ringer volume.

5. Disable AssistiveTouch as unnecessary.

Everyone laughed at Samsung when it released a failed device, but it looks like Apple will be able to surpass its main competitor in terms of the number of problems with. The other day we wrote about that. Now another problem has been discovered - crackling and strange sounds in the iPhone X speaker.

Sound problems

On the "apple" forums, more and more people write that strange crackling and buzzing is heard during audio playback on the iPhone X. Moreover, this is most often noticeable if you use a high or maximum volume level.

According to the owners of the iPhone X, an incomprehensible sound appears during a phone call, when playing music, video with sound, an alarm signal or a ringtone. And the problem is not limited to a specific version of the iPhone X or iOS firmware. Apparently, this is a marriage of the iPhone X, which is not hardware and does not depend on what firmware is installed.

The strange sound appears only at maximum volume - it is possible that this is the result of distortion. Some believe that this could cause hardware or software issues affecting the speaker.

I listen to music quite often through the iPhone X speakers, and I immediately noticed a slight crackling sound.Since many of us have noticed this noise, my guess is that it is software, not hardware.

Recall that n A few months ago, several iPhone 8 and iPhone 8 Plus owners faced a similar problem