Reset Windows 7 password from the installation disk. Windows Password Recovery: Utility to reset the Windows Account Password. Programs for hacking password in Windows

Hello, dear blog readers in this article will be described in detail about how to reset the administrator password in the Windows 7 operating systemor create a new account, without any utilities specifically designed for this. This method is very effective when you for some reason lost or forgot your password from the account, and this account is the only one.

In fact, the administrator password reset in the Windows 7 operating system is not such a complicated procedure if you know all the subtleties.

So, let's start from the first stage. For this we will need run command line In front of the login screen to the Windows Account. But first things first.

Action No. 1. : You need to download the disk with distribution of Windows 7. If for some reason you do not have this disk - it is not trouble, you can run the entire procedure from the recovery disk. This situation is possible that you will not have the first or second. But there is again the output, you need a LiveCD with Windows PE, or if you have another operating system Windows on another local disk Winchester.

Action number 2: The window has surfaced, the so-called language parameter selection window, You need to press the "Next" button, then press the "Restore System" button, again click "Next", then, as shown in the picture below, click the "Restore System" button.

Fig 1. System Recovery Settings

Action number 3: We prescribe the command in the command prompt regedit.and press ENTER. You will open the registry editor window.

Action number 4: In the registry editor window, click on the section HKEY_LOCAL_MACHINE (See Figure). After that, from the "File" menu, you need to select "Load a bush".

Figure 2. Registry Editor

Action number 5: You need to go to that disk exactly where Windows 7 is installed. By the way, if you do not see the usual letter C, do not despair, such a fairly often happens, most likely the letter has changed during this procedure. You need to open the file to the address:

FROM (or other name section hard disc) : Windowsystem32configsystem.
All this we see in the picture below:

Figure 3. Download bush

It happens that in many cases, the disc with the operating system is not visible if you have such a situation, then you need to download the driver in action number 2, it is to solve this problem.

Action number 7: You need to go to the section.

HKEY_LOCAL_MACHINE888SETUP.

After that, you need to click on the following parameters:

- CmdlineYou must enter cmd.exe and click on OK, as shown in the picture below.

- SETUPTYPE.You need to replace the figure 0 to 2, also click on OK, as shown in the picture below:

Figure 5. Registry Editor.

Action number 8: You need to highlight the section 888 in HKEY_LOCAL_MACHINEAfter that, from the "File" menu, click on the "Unload bush" item.

Action number 9: You must remove the installation disk, close the address bar and the registry, click the Restart button in the Recovery Settings window.

So we reached stage number 2, we denote it as " Password reset account Or creating a new user, enter account”.

After pressing the computer's restart button, you must wait, when the login window appears in the Windows 7 operating system. Immediately before logging in, the command line window will automatically pop up.

Here is the actual account password.

To reset the password, you need to enter the following command, after entering the Enter.

nET User user name New_pall.

If there are gaps in the password invented by you, you must enter them in "quotes".

In the picture below, we see as the ADM7 user, sets the TL942G8DWP password.

Figure 6. Command line.

If you suddenly, for some reason, have forgotten the name of your new account, write the Net User command. All previously created accounts will appear before you.

On numerous requests of readers decided to write detailed and simple instruction, how to reset the password from the user account in any version of Windows: 10, 8.1, 8, 7, XP.
So, you turned on the computer, and the system asks to enter a password to enter. You enter a user password, and it does not fit: an error "Invalid password" occurs. What to do, if no password is suitable, and you need to enter the system? There is a solution - the password can be reset using a special program recorded on the loading USB flash drive. Now I will tell you how to create such a flash drive.

You will need to take a long time to use anyone. other computer. To do this, contact a relative, a friend, a neighbor, maybe there is a computer at work - I think it is not a problem now.

So, sit down at another computer or laptop. Insert any flash drive to it:

Download free program To reset Windows passwords. You can download it from the official site (or from my Yandex.Disk):

Run the downloaded file lsrmphdsetup.exe.: Install the program as usual: i.e. We agree with everyone and in all windows we click the button " Next". In the last installation window, press the button " FINISH."- The program will start automatically and its label will be created on the desktop:

In the starting window we click the button Burn Bootable CD / USB Disk Now! ("Write a bootable CD / USB disk right now"):

In the next window choose windows version which is installed on that computer where we will then drop the password. Not available Windows 10.but it's not scary: if you have a "dozen", then choose here Windows 8.1. With your discharge.

By the way, on one of the forums, I saw a message that you can create a bootable USB flash drive with Windows 8.1 64-bit, and it is suitable for resetting the password on any version of Windows (I checked on Windows 10 64-bit and on Windows 7 64-bit - so And there is):

After chosen the desired version Windows - press the button " Next”:

In the next window, put the marker at the point USB Flash. and choose the letter of our flash drive (it is already inserted into the computer). In my case, the letter Flyers: F..
Then press the button " Start.”:

The program will download the necessary components from the Microsoft website for some time:

After that, the program will ask: " Format USB disk now?"All files, if they are on a flash drive, will be deleted. Click the button " Yes”:

Now we wait until the loading flash drive is created:

At the end of the process - click the button " FINISH.”:

Everything! The loading flash drive with the password reset program is ready. Take it out and carry it on your computer.

Insert the bootable USB flash drive into your computer. And now the most important thing comes, and at the same time the most difficult for those who will do it for the first time, the moment. We need configure computer download from our flash drive .

Those who can upload a computer from a flash drive - can immediately move to the end of this article. For those who do not know how to boot from the flash drive, I will try to explain as clear as possible:

============================================================================================

In order to "force" the computer to boot not as usual (i.e. with hard disk), and from the device you need (in our case - from the flash drive) - you need to enable a specific setting in BIOSE Computer.

To get into this very BIOS, we need immediately after turning on the computer to press a specific key on the keyboard (and click more than once, and many, many times until I see the BIOS on the screen).

On the different computers and laptops This key is different:

• Most often used key Delete. (or Del. ).
• Also often bios can be called up F2. (and on some laptops Fn + F2. ).
• The keys are less common ESC, F1, F6 other.

In general, immediately after you press the power button (POWER) on your computer or laptop, do not wait until it starts download windowsand immediately start to press many times on the key Delete. on keyboard. After a few seconds (5-10) on the screen should appear BIOS.

If nothing like this appeared, but started like the download of your Windows, then we don't expect anything else: rebooting our computer again (you can directly with the RESET button) and try to press many times the other key - F2..

If you again did not get into the BIOS - reboot the computer again and try to press the following key - ESC. Later F6. etc. But I hope you do not have to experiment so long: in the overwhelming majority of cases, or the Delete key is triggered or F2.

By the way, the hint about which key to download bios usually flashes at the bottom on the screen immediately after turning on the computer. But for some reason no one looks at her, or does not have time to consider.

On different computers BIOS Different, and he looks in different ways.

I have on my computer, for example, such:

On another computer, he will be like this:

On the third computer, such:
That is, I am talking to what to write a separate instruction to each bios is almost unrealistic.

The main thing is that anyone needs to be known to customize the download from the flash drive: in BIOS (as if he did not look like) you need to find a section where the word is present Boot (from English. "Download"). Turning through the arrows on the keyboard to this section - set first in the list of boot devices flash drive.

In the BIOS, the flash drive can be displayed with its own name (for example, Transcend.) or as USB-HDD.; There are other options. One thing is important: it must be selected as the first device from which the computer will be loaded..

Usually, the flash drive is "raised" to the first place with the arrow on the keyboard, or keys +/- either F5 / F6..

Having setting up the setup in Bios, we must leave it, not forgetting to save the changes made. To do this, go to the section EXIT. (he usually the very last) - and there choose the item " Save and EXIT."(" Save and exit "). And then confirm again that we leave by clicking " Yes”.

On this, everything: if you did everything right, the computer will reboot and the download will go from the flash drive (you need to press the Delete key again, or F2, or something else is not necessary!).

Many do not want to even communicate with the creation boot flash drive with any software, because They are afraid that still will not be able to adjust the computer download from it. I tried to describe the entire process of loading from the flash drive as it can more. If you caught this text, I hope it became a little more clear and now it remains to be practiced.

===============================================================================================================

So, I created a bootable flash drive on another computer with a password reset program. I insert this USB flash drive into my computer and turn it on.

Immediately, I make a lot of many times the key Delete. on keyboard. After a few seconds I get into BIOS.

I turn with the arrows on the keyboard in the section Boot (Although in my bios, you can work with the mouse - in the old versions of the bios will not work so).

Here I have the first device now hDD (Achi Po: WDC WD50 ...):
I highlight this line with the arrow on the keyboard and click the key ENTER. A list of devices from which you can boot are open. In my case, this is a hard drive and my flash drive (it is listed here twice). We raise the first place in the list - flash drive (If you have a choice: USB or UEFI, then select UEFI). We do it using the arrows on the keyboard, or keys +/- either F5 / F6.:

Now the flash drive in the first place in the list of boot devices:

Now we leave here, saving the changes. To do this, move the arrow on the keyboard on the last section EXIT.. Select line Save Changes and Exit - Click the key ENTER:

Then choose Yes:

After a while, the menu in which the key opens ENTER We choose item Lazesoft Live CD.:

We are waiting for the download:

In the next window, check the item is selected. RESET Windows Password. ("Windows Password Reset") and click the button Next:

The window will populate a message about the non-commercial use of the program - click Yes:

Podmame again Next:

In the next window select username, whose password will be reset and click Next:

Click on the button RESET / UNLOCK.:

Password Successfully dropped - click OK. Then FINISH.:

Go to " Start"And Zhmem. Reboot Computer ("To restart a computer"):

Press OK:

After the computer reboots, we can log in Windows without password!

The password is the most important tool that protects user data from viewing and using third parties. However, this is not a unbearable password can turn against the user itself. And if, for example, the password from the account of any website will not restore any problems, then with access to account access Windows already Questions may arise. But there is a solution, and this is a Windows Password Recovery utility.

In fact, quite many users get into such a situation as the password loss from the account to enter Windows. In most cases, users resort to full reinstall The operating system, which can be avoided if using the Windows Password Recovery utility to restore the password.

The Windows Password Recovery utility is an effective tool that allows you to restore or completely reset the password, as well as create a new administrator account or completely delete the existing one. The utility successfully restores the password for Windows 10 and more junior versions of this operating system.

Password recovery move utility Windows Password Recovery:

1. First of all, the utility needs to be installed on any other working computer in order to create a bootable media.

2. By running the utility, you will be asked to create boot disk or flash drive. note that trial version Programs can create only bootable CDs, and to create a loading flash drive will require an acquisition. full version programs.

3. Go to the tab "Advanced Recovery" where you need to choose a Windows version for a computer on which the password will be recovered.

4. Return to the first tab. You will see that the third item appeared on the screen, which allows you to save the ISO image with a utility to a computer. Subsequently, you can create a boot disk or flash drive using any other program convenient to you.

5. If you create a boot disk (in the free version) through the Windows Password Recovery program, you can only press the button. "Next" , and then "BURN" So that the program begins to create a bootable media.

6. The course of the process will begin, which will notice a few minutes.

7. As soon as the process of recording the bootable media is completed, a window will be displayed on the screen that reports the success of the procedure.

8. Now, armed with a bootable media, you will need to connect it to a computer on which the password will be recovered, and then log in to the BIOS and install the disk or flash drive as the main boot device.

9. If everything has been done correctly, the following window will appear on the screen:

10. After waiting for the end of the download utility, you will need to select a disk with Windows on the screen on which the password will be reset.

11. Select the account in which the password will be reset, and slightly below select the appropriate action: delete password, password change, delete the administrator account, creating a new administrator account.

12. In our example, we change old password To the new, therefore, accordingly, in the next window of the program, we will need to enter a new password twice.

13. After completing the procedure, you remain restarting the computer as usual. Ready!

Features Windows Password Recovery:

• The utility has free versionBut there is one nuance: it works purely in a trial mode, not allowing you to delete and reset the password for Windows 8 and other versions of this OS, as well as deleting an administrator account or creating a new one. To fulfill these actions, you will need to purchase a paid version;
• The utility works with operating windows systems XP and above;
• The utility successfully resets and restores the administrator password for Windows 10 and more junior versions of this OS;
• Allows you to delete an existing administrator account or create a new one.

Windows Password Recovery is an effective tool for both ordinary users and professionals who are engaged in the repair of computers. Despite the lack of supporting the Russian language, the utility is extremely easy to use, and therefore it can be recommended to all for quick access to the locked computer.

Good day, dear readers and again Tishkin Denis in touch.

IN recent versions Operating systems OT. microsoft. For security purposes, it is possible to install a password to enter the work area. If this tool is no longer relevant, it can be turned off. I will tell you how to remove the password in Windows 7 in several ways. After all, constantly introducing secret symbols sooner or later annoying. This is especially irrelevant when only one person works at the computer.

Many users store information on the computer, access to which should be only. If only one person uses the device - this is not a problem. But in the case when another may come to it - certain difficulties may appear.

Windows provides a special tool that limits access to data by installing a personal key. So, for example, parents are often used by this tool so that their children cannot see the content that does not rely on them. In addition, thus you can protect yourself from changing personal settings.

Turning off the password( )

Turn off the key to enter the input in several ways. Each of them implies that you are the owner of the account you want to update. The first mean that the password is known and the user has administrator rights.

It allows you to quickly cope with this problem:

That's all. Now when the system is started, the secret key input will not appear.

Important! At the same time, in case of changing an account or output to the lock screen, enter the password will still be needed.

You can remove the annoying function using the standard menu " User Accounts" True, this will not turn off, but a full removal. Despite this, Password will not be asked under any circumstances, even after leaving the sleeping mode.

To turn off the protection tool, you need to perform the following:

Everything, now the system will not ask "stupid issues" concerning security from this area.
Here you can also create a secret combination of characters.

Interesting to know! Specialists recommend when installing the key to introduce large and small letters on different languages And at the same time add numbers. At the same time, the length should be at least six characters. Only in this variant can be guaranteed at least some kind of safety.

Resetting a network key( )

Probably all computer users know what a network is. It is a link between two or more devices, which allows you to exchange information. The younger generation is familiar with this concept, since through this method you can go together.

But what to do if after connecting the machines, the network password input window appears? In this case, if it does not exist, the confirmation of an empty string will not lead to the desired result.

The fact is that Windows 7 provides new security tools, and therefore it is necessary to comply with several conditions for the entrance:

Using classical settings on all devices.

If all this is executed, then you will not need to enter secret characters.

Reset password administrator( )

Sometimes situations occur when with some circumstances you simply forgot your password with which you can get to the desktop, and in general, access to personal data. This often happens when the user works constantly behind multiple devices. And if the passwords do not write to them anywhere, it is quite possible to confuse them.

There are several solutions. The first thing you can do is spend some time on the selection. In addition, simply delete the system from the computer and install a new one. But in this case, the data that were on system disk. And it is not a fact that they can be restored, although there are methods.

But there is a safer way - bypass, which I want to tell. To do this, you will need an installation disk or flash drive with Windows. It is important to note that the operating system must be exactly the same. For example, if installed ultimate version, then on the portable device the same.

So, if all is found and prepared, you can start:

After the work done during the boot, the command line will appear. Here we will be able to change the password. To do this, enter in the string " nET User User Password" Confirm the action. Sample team: " net User Admin 1111».

By this way, we changed the password for the user " admin." on the " 1111 " Now in the offering window we enter our cherished numbers and wait for the download.

Password reset via sam file( )

There are many ways to avoid the system of protection for logging into the system. Despite this, they all only change the information that is stored in the SAM file. It is in it that all the necessary data relate to the User-Password bundles.

It is worth noting that this file does not have a special expansion. The fact is that it is a registry component. It can be found in the folder " Windows \\ System32 \\ Config", Which is located on the system disk.

It is also important to note that this method is considered one of the most difficult. Nevertheless, I consider it necessary to tell you. To work we will need special program. In this case, each step needs to be performed with extreme caution, because it can radically change the whole process.

We will use Active Password Changer. In addition, we will need a clean flash drive.

So, to remove the password request, you need:

If everything passes, as needed - there should be no problems in the future, as in system region Only the components we need are changing.

The only disadvantage is that some relatively old motherboards may not support start from portable memory. In this case, you can use a plastic disk.

Well, as you can see, there are several different waysallow you to remove or change the account password. At the same time, they are absolutely simple, even there is no need to watch the video. Performing clearly all according to the instructions, each can open access to the necessary information.

I hope everyone will find an option for themselves, which will help to cope with the problem. Subscribe and tell me about my friends!

In Windows 8, 7 and 10, you can protect the account. So nobody will go there. But suddenly you forgot your password? Or acquired a computer on which there are already "accounting"? In Win, you can not restore the account using email. The code will not shift in the SMS message. But no need to format the disk. Password reset Windows 7 through a flash drive is a solution to the problem.

If you forgot the password from Windows - not trouble

1. This will suit the Ultraiso program. You can use another utility if you want.
2. Find it on the network and download. The application is paid. But there is a trial version.
3. Insert the drive.
4. Run the program.
5. "File - Open". Select an ISO file.
6. Go to the "Self-loading" menu and click on "Write a Hard Disk Image".
7. In the "DiskDrive" section, select USB Media.
8. Next can format it if you have not done that earlier. The flash drive must be in
9. "FAT32".
10. Click to "write down". The system will warn that all data from the drive will be deleted. Confirm the action.
11. Wait until the files are copied.

Replacing files

To remove the Windows 10, 8 or 7 password, log in to the recovery mode, and through it - to the command line.

1. In BIOS put external storage In the priority of loading.
2. After startup, the installation wizard will open.
3. Choose language.
4. Click on "Restoring System". Do not click on "install".
5. A list of OS will appear. Note the code from which you can not remember.
6. In the recovery parameters, click on the "Command Line". Now you see a white font on a black background.
7. Create backup "Utilman.exe" - enter "Copy [System Disk]: \\ Windows \\ System32 \\ SETHC.EXE [System Disk]: \\ File". The file will be copied to the File folder.
8. Now replace it - "Copy [System Disk]: \\ Windows \\ System32 \\ cmd.exe [System Disk]: \\ Windows \\ System32 \\ Utilman.exe".
9. The system will ask to confirm the action. Write "Y" if you agree.
10. When the file is copied, click "Restart" and pull out the drive.
11. In BIOS, return the previous settings. Now you can run OS.

Reset

1. When entering the account, open " Special abilities"(Button on the left below).
2. But the command line will start.
3. To reset Windows Password, enter "Net User [Name-User] [New Code]". If there is a space in the name or cipher, enter them into quotes.
4. If you want to delete the code, set two quotes without symbols between them.
5. Restart the computer quietly back to your account.
6. Return the file "utilman.exe". Run from the flash drive again, open the recovery mode and command line. Write in it "Move [System Disk]: \\ File \\ Utilman.exe [System Disk]: \\ Windows \\ System32 \\ Utilman.exe"

If you can not go to the "account" Win, this does not mean that you have lost all user data. In Windows XP, 7, 8, 10 Password reset from the flash drive is a very simple task. Although there is its cons. It turns out that any person can go into the account. Protect your personal information in several ways - not only by the code in the account.