The WiFi program on Windows 8 laptop. The best programs for distribution Wi-Fi from a laptop. What is the program for distribution of WiFi with laptops

The distribution of Wi-Fi with a PC can be made in two ways: using programs pre-installed in the operating system, and those that need to be downloaded from the Internet. In the article we will look at the second way. Turn your laptop in Wi-Fi router is better using specialized utilities, since they have a large functionality compared to Windows.
Also, in favor of the second option, it also says that the program when distributing the Internet originates most of the available PC resources, while the standard OS means is only a small part. And of this implies the conclusion: third-party software will distribute the network from the computer to other devices much better.

Distribute the Internet from laptops a huge number of programs. Many of them are free and support all the version and editorial board of Microsoft software. Our task, focusing on the opinions of users who we found on profile forums and on social networks, choose among this huge diversity the best programs for distributing the Internet from personal computers to peripheral devices.

№1. WiFi Hotspot Creator

Choosing the best third-party programs, we evaluated them in efficiency, easy to use and simplicity interface. In our ranking there is no expensive and promoted software, we chose simpler applications that are suitable for unprepared users.

Wi-Fi Hotspot Creator is free and easy to use. A small application will allow you to turn your computer into a Wi-Fi router or "Hot Spot" (access point) and distribute the Internet from it to other devices.

To customize and use the software will be able even newcomers, who have never been dealing with such utilities. Download the program from the official page of the author for free and follow the instructions:

To stop the distribution, you must click the button opposite by the value, that is, " Stop (Stop)" That's all the settings. As you can see, the program was set longer than settled.

№2. Virtual Router.

This free utility is also simply configured. Load it on a computer from the official page of the author by clicking the "button" Download (download)».

The Virtual Router utility is loaded and installed on the computer in the same way as the previous one, with the exception of some nuances.

After installation, you need to properly configure the program. And for this you need to fill such fields: " Network Name."- Name name," Password."- Password," Shared Connection"- Select a connection (for example, by cable). When all the parameters are configured, press the " Start Virtual Router."She will launch distribution from the computer.

To stop the distribution, as in the case of the previous utility, you must press the button " Stop Virtual Router.».

If you compare Virtual Router with Wi-Fi Hotspot Creator, the first program has more functions, although it is installed and configured the same one. In this specialized utility, for example, there is the option "Peers COnnected". Here you can see who connects to your network. You will be available for detailed information about the connected user: Mac, IP, network name.

Both programs described by us do not have Russian-speaking support, but also do not need it, since all the fields that need to be filled, and so intuitively understandable. Each utility is free and configured almost the same, so it will not create any problems to unprepared users. The distribution of the Internet with PC is easy to run and just stop.

Number 3. WiFicreator

If you need a Russian interface, download the third program - WiFicreator. This specialized utility for setting access points is also free and easy to learn. And unlike the first two programs, there are no advertising garbage and malicious applications.

To download a laptop utility, use the reference from the official page of the developer :.

After downloading and installing the program, select the user interface language. The "Management" point is responsible for changing the language if the utility has launched in English. To turn your personal computer into a Wi-Fi router, you need the appropriate settings. They practically do not differ from the first two programs, except for the names of the fields.

Configure the following parameters; " Network Name."- Connection name," Network Key."- password to him," Internet Connection."- where the utility should take the Internet. If all settings are manufactured, press "Start Hotspot" to start distribution from a personal computer. For its termination, respectively, press " Stop Hotspot." Here are all the subtleties of use.

The three utilities described by us are in demand by users due to their effectiveness, simplicity of parameter settings and an intuitive interface. But you can try and promoted software, for example, MyPublicWiFi. This software will also turn your laptop into a router for portable devices by creating an access point. The program has many settings and as many features.

There is also a Switch Virtual Router - a utility that controls hot-spot (creates, sets up, starts, stops). After adjusting the access point, the program can be closed, but the distribution of the Internet does not stop.

There is also a Connectify utility. It is free, easy to learn and functional, but there are too many advertising garbage.

In this article, we will consider the most popular programs with which you can run Wi-Fi distribution from a laptop, or a computer that works on Windows 10, Windows 8 (8.1), and Windows 7. But, I will show the setup process on the example of a laptop where Windows 10 is installed. All the same, this is a new, popular system, and we will consider it on its example. But, some essential difference even with Windows 7 you will not notice. So, this instruction is suitable for all computers and laptops that work on Windows 7 and newer systems.

For those who are not in the subject, and do not know how to distribute Wi-Fi from the laptop, run the access point, and for which the use of special programs, I explain. Windows has the ability to run a virtual Wi-Fi network. Simply put, turn a laptop, or a computer with a Wi-Fi adapter into a regular router. We have the Internet connected to the laptop. We launch the Wi-Fi access point, in our case using the program, and the laptop begins to distribute the Internet on a wireless network. In this way, you can distribute Wi-Fi to the phone, tablet, other laptops, etc. The main thing, on your computer should be Wi-Fi and the Internet (by network cable, or via USB modem).

To start a wireless access point, you can use special programs. And you can do without them, and run the distribution by performing certain commands on the command line, and opening access to the Internet. For example, it is easier for me to start the network using commands than to use third-party programs for this. We already have detailed instructions on starting access points on a laptop via the command line:

And instruction specifically for those who have.

In this article, I will show several programs created specifically to launch Wi-Fi distribution from a laptop, and to manage a virtual network. I picked up the 4 most popular programs, among which one paid (I do not know if I need, but I will show it). Today I was sitting today, and checked these programs on a computer with Windows 10. In each figured out, set up, and checked. Everything works for me, the laptop distributed Wi-Fi to the smartphone, the Internet worked.

Select the program:

Virtual Router., she is Virtual Router Plus. (as far as I understood, in older versions). The simplest, free and work program. Well, probably the most popular. Works great in Windows 10. There is a Russian language, but the translation is very bad (he is not needed there).
Switch Virtual Router.. Another free program for distribution Wi-Fi from a computer. She has larger settings, compared to the "Virtual Router". There is a Russian language and understandable interface. I already wrote about this program, but consider it again.
Maryfi. (Russian version) . The program is also free, but something I did not have something with her. At first, Yandex did not allow me to the official website, they say there is a virus (But, this is not a fact, the antivirus did not swear). I downloaded it, put it, and I could not run the access point. And in general, problems with a virtual adapter began, the drivers had to reinstall. Perhaps this is only me such problems. So it seems the program is good, and popular.
Connectify 2016.. Very cool, and functional program. But, paid. There is seems to be a trial period. At least, I managed to start the virtual Wi-Fi network. It is immediately seen that the software is paid, there are a lot of cool chips. But, I never found the Russian language.

Of course, there are other options, but we will consider only these programs. They are quite enough.

Important advice! Select one program for yourself (which you liked most)Download and use it. No need to download and install / run everything at once. And then nothing will happen. If, for example, when you start the network in the Virtual Router program, an error appears that the start is impossible, it will also be in other programs, since the problem is most likely to the Wi-Fi adapter (no driver, it is disabled, incorrect driver). The principle of operation of these programs is the same, we can say that they differ only in the interface, and not very necessary functions (type autorun, display Wi-Fi customers, etc.).

The program will only create and run a virtual network. You can connect to it, but in order to work the Internet, you need be sure to allow sharing to the Internet (except Connectify). How to do it, I will write at the end of the article.

Configure such a scheme:

Download and install the selected program.
We launch the distribution of Wi-Fi in the program. If the launch error appears, then solve it.
Open access to the Internet in connection properties.

Here we go!

Virtual Router Plus: Wi-Fi distribution program in Windows 10

I checked the version of Virtual Router v3.3. It is certainly very different from Virtual Router Plus, but it works well. You can download it by.

Installation is not needed. Just unzip the downloaded archive, and run the file Virtualrouter.exe.. Most likely the official website will open in the browser, just close it.

Immediately after launch, Virtual Router will try to run the distribution of the Wi-Fi network. If the status is written "work", then the network is already running. And now, you need to open a common Internet access. (how to do it, look at the end of the article), restart the computer, and start the program again.

And if it is written in status that "Virtual Router failed to run", then the problem is most likely in the wireless adapter. The decision of this problem was written in the article :.

Using the program is very simple: cooked, it hid in the notifications panel. Closed, distribution of the wireless network stopped.

SWITCH VIRTUAL ROUTER program to start the Wi-Fi access point in Windows

It seems to me that this is the best program. There are all the necessary functions, Russian and it is free. You can download by reference. Or, from the official site http://switchvirtualrouter.narod.ru.

Run the installation, and install Switch Virtual Router. Then, run the program. If you want to change the standard network name and password, then press the button in the form of a gear, and set new parameters. There are also other settings.

To start the access point, simply click on the "Start" button, and open the access to the Internet. (Instructions at the end of the article).

I will not write anything else on this program, as we already have on the site. Everything is painted in great detail, with all the nuances. By the way, if the error "Wi-Fi adapter is turned off" appears, then you need to check the operation of the virtual adapter.

Setting up MaryFi. I distribute the Internet from a laptop

If you decide to use the Maryfi program, then the Russian version can be downloaded by (version 1.1), or from the page on the official website http://www.maryfi.com/maryfi-russian-edition.php (I don't give direct links, as Yandex talks about the harmfulness of the site. But, the antivirus did not find any viruses).

Run the installation file and install the application. Most likely, during the first launch of Maryfi, the program will ask you to install the Microsoft .NET Framework 3.5 component. You just need to agree. The system itself crashes and installs. After that, you can run MaryFi.

In fact, the entire program fit into one small window. There we specify the name of the network and password, and click on the "Run Wi-Fi" button. If a Wi-Fi adapter is in order, the network will be launched.

If the network starts, you need to open a common access to the Internet, and everything is ready.

Connectify 2016 for Starting Hotspot on Computer

I remind you that this is a paid program, but it seems to be with a free, strongly trimmed version, or with a trial period. But the program is very cool. Many different functions. What I liked most is something that you do not need to manually open the Internet access (many have problems with this). Just choose from what connection to split the Internet, and everything is ready.

I downloaded Connectify from the official site: http://www.connectify.me/hotspot/. After downloading, the program needs to be installed on your computer and run.

Further, everything is very simple (even without Russian). Select the connection through which you are connected to the Internet, if you need, change the name of the network and password, and click on the "Start Hotspot" button.

The computer will immediately begin to distribute the Internet. I connected the phone, and the Internet has already worked. After starting, the tab will immediately open on which connected devices (clients) are displayed. And even the statistics are displayed, how much internet they use. In the program, near the fields, you can see the inscriptions "Max", and "Pro". These are most likely the functions that are available only in the paid version. But without them you can do.

If I am not mistaken, and really there is a free, trimmed version of this program, I advise you to use it.

Open access to the Internet

If you launched a Wi-Fi network via the Virtual Router program, Switch Virtual Router, or Maryfi, then you must configure sharing. Otherwise, there will be no access to the Internet.

Click the right-click on the Internet connection icon and open the "Network and Shared Access Center". Further go to "Changing the Adapter Settings".

Right-click on the connection through which the Internet is connected with you, and select "Properties".

Open the "Access" tab, put a tick near "Allow other network users ...", select the connection you created from the list, and click "OK".

Important! After these actions, you need to restart the computer, and re-run the distribution of Wi-Fi in the program. After that, you can connect your devices to the network. The Internet should already work.

If the devices are not connected to the launched Wi-Fi network

If an error appears when connected, that it is not possible to connect, or is the permanent IP address, the first thing you need to turn off the antivirus. Also, you can turn off the firewall, and other programs that can block the connection.

Most often, antivirus is guilty. It blocks the connection of the device.

Afterword

Something seems to me that this article will have a lot of questions. Specify them in the comments.

I tried to describe all the moments that may appear in the process of starting the access point using programs. But, equipment, operating system, a set of programs and drivers are different. Therefore, different problems may appear. Read the article carefully, see the links that I gave, well, if nothing happens, then describe the problem in the comments. Good luck!

There is an urgent need for high-quality Internet connection. Cellular operators do not always guarantee high speed and quality, which you can not say about Wi-Fi. If we consider that the use of the home network will cost cheaper, then the presence of a router becomes practically mandatory.

Laptop can be how to receive a Wi-Fi signal and distribute it to other devices.

But if for some reason the router does not either buy it inexpressive, its functions can be easily replaced using a laptop with Windows 8 / 8.1. How to turn it into an access point, read in our review.

How to distribute Wi-Fi feature

For this purpose, a laptop is suitable with Wi-Fi and installed Windows 8 (8.1). Absolutely all the current models are equipped with them. Expand access point using OS real in minutes.

Turn on the Wi-Fi adapter on a laptop and check the presence of drivers to it. It turns on the combination of Fn and F1-F12 (depends on the manufacturer). Also in the system tray, you can click on the network icon and activate the "Wireless Network" slider. The Network Adapter Device Manager subsection must be submitted to the name of the communication module. If there is an exclamation mark near the name, it means that the module is not active. Right click on. If an exclamation mark with a yellow triangle is visible near the name, you need to install the driver. Check it from the site manufacturer's laptop.
Connect the laptop to the Internet by means of a network cable, 3G / 4G or ADSL modem. In the Windows 8.1 system tray, an active connection should be displayed.
Make sure whether the WLAN auto-tuning service is running, as well as "Common Internet Connection (ICS)". Press WIN + X - Control Panel - Administration - Services. Make sure that autorun is selected in the settings.

Enter the command line in one way:

Win + X - Command line (administrator).
Win + R - CMD.
Enter the Windows Home Screen, go to the application menu, find the "Command Line", click right-click, activate "Run from the administrator name".

Make sure the wireless module is ready to distribute the Internet as a Wi-Fi access point. In the command prompt type nETSH WLAN SHOW DRIVERS. Find "Support for the posted network". If the record is "yes" in front of the record, then go to the next step.
Add command netsh WLAN Set HostedNetwork Mode \u003d ALLOW SSID \u003d Your_Network Key \u003d 123456789 Keyusage \u003d PersistentTo implement a virtual access point.

SSID is the name of your connection, you can call it as you want. The main thing is that there are no Russian characters in the name.
Key is a network password, you can also change it to your own. Moreover, it must contain at least eight characters, without Russian signs.

Activate the formed network. Dial the command netsh.wLANstart.hostedNetwork.. Access point started, distribution began. You can check its availability, for example, on a tablet or phone. Among the available networks will appear your name.
Allow the network participants to receive the Internet:

In the center of network management and shared access (in the system tray, right-click on the Internet symbol) go to "Changing the Adapter Settings".
Find "Connecting on a local network * 1" (the number may differ).
Right-click on the connection you applied to distribute Wi-Fi, then go to "Properties" and switch to the "Access" tab.
Check "Allow other users to use the Internet connection to this computer", mark the new Wi-Fi connection in the home network list.

Now the equipment will be able to receive the Internet from the newly generated access point. To monitor the work of the virtual router, enter the laptop on the command prompt netsh.wLANshow.hostedNetwork.So you can check the number of connected devices. Connection stops command netsh.wLANstop.hostedNetwork.. The only disadvantage can be called the need to write start-up and stop commands when connected. Therefore, we recommend saving them, for example, in a text file. Now the laptop under Windows 8.1 will easily become the source of the Internet without wires.

Application of third-party programs

If the continuous use of the command line does not suit you or want to run all of the mouse with two clicks, special programs will help to make the distribution of the Internet from a laptop managed by Windows 8.1.

Connectify Hotspot. Popular program distributing Wi-Fi without unnecessary operations. It is enough to run the program, determine the connection to decay, set the password and run. Often the free version is quite enough, although one of its tangible restrictions can be the absence of an Internet distribution function with a 3G / 4G modem, which can cause inconvenience during travel. The inability to change the connection name will not be considered a critical drawback.

MypublicWiFi. A free program for shaking Wi-Fi between devices can function in an access point or repeater mode. Supports all the latest versions of Windows, including 8.1. Run it, come up with a network name, password, select a network for distribution and click "Start". Several movements - and the access point in the laptop is running.

Conclusion

We looked at all methods with which you can distribute the Internet via a Wi-Fi-Fi-adapter laptop operating under Windows 8 / 8.1. It is really absolutely not difficult and takes a few minutes.

Write in the comments, did you manage to fulfill all the recommendations? Is the access point launched? Rada will read you.

In this article you will find all the necessary information on setting the access point on Windows 8. and Windows 8.1.. We will configure the distribution of the Internet from a laptop that runs on Windows 8 and connect to this laptop on Wi-Fi our phone, tablet, other computer, TV, etc. Our computer will perform the role of Wi-Fi router.

I have been going to prepare this article for a very long time, as this is a very popular topic at the moment. The article has collected a lot of views and comments. And even even popular.

Briefly about what we will do, and for what to run the access point at the laptop.

For example, you have a laptop (Perhaps a personal computer with a Wi-Fi adapter), there is wired internet (or Internet through 3G / 4G modem), and devices that can be connected to the Internet via Wi-Fi. Modern smartphones, tablets, laptops, televisions, almost everyone has such an opportunity. And you have the Internet on the cable, or from a USB modem.

We connect the Internet to a computer on which there is Wi-Fi and run access point on it. In this article, we will do this using the example of Windows 8. That's all, our laptop receives the Internet on the cable, and distributes Wi-Fi to the devices you need. That's the whole scheme 🙂. If you do not want to spend money on buying a Wi-Fi router, or you just don't need you (for example, very rarely need Wi-Fi), then this way, what you need.

Configuring Internet distribution on Windows 8 is almost no different from the setting on Windows 7 (reference to the instruction is at the beginning of this article). But, I understand that much easier to do everything according to the instructions, which is written specifically for the operating system, which is installed on your laptop. And since Windows 8 (8.1) is actively gaining momentum, this article will be useful.

What needs to be done before adjusting the access point?

You need to connect the Internet to your laptop. Via cable, or via USB modem. With a USB modem, there may be nuances, see the article if the Internet is through the modem. There is an article for Windows 7, but it is not scary. If the Internet is connected via the network cable, there should be no problems. The Internet should work, sites in the browser must open.
Ensure that your laptop has Wi-Fi and the driver is installed on it. If you have previously connected from this laptop to wireless networks, then everything is fine, then the driver is installed. If you do not know whether the driver is installed on the wireless adapter, then go to Control Panel - Network and Internet - Network Connectionsand see if there is there Wireless network. If there is, everything is fine. If not, download from the manufacturer of your laptop (adapter) driver for your model and operating system and install. Driver for wireless Wireless LAN adapter.

That's all, you can start setting up.

Setting up a Wi-Fi access point on windows 8 using the command line

This is the first way in which we will not use third-party programs, and all make the standard capabilities of the operating system. This method is a bit more complicated than the second that you find below. But, sometimes you configure everything through the command line is even easier. Yes, and through third-party programs may arise.

Right-click on the left right corner (or keyboard key + x)and select Command Line (Administrator).

In the command line window, enter the command (you can simply copy and paste):

Where "F1comp" is the name of the network, it can be any. English letters.

A "12345678" is a password to the network. It will need to enter on the device that you will connect to Wi-Fi. Specify the password at least 8 characters. You can digits and English letters.

Click ENTER.

A run-up result will appear with information that the network name and password are successfully changed.

We enter another command:

This is a command to start the access point. Press ENTERAnd we see such a result:

It should be written that the hosted network is running. If you have the same result as in my screenshot above, you can continue. Command Line window can be closed.

If you saw a mistake Failed to run the posted network, then follow the two commands in turn:

netsh WLAN Set HostedNetwork Mode \u003d Disallow
Netsh WLAN Set HostedNetwork Mode \u003d Allow

Go to Device Manager, open in the list Network adapters, Right-click on Virtual adapter posted network and select Enable.

We perform two commands on the launch of the network, which I wrote above:

netsh WLAN Set HostedNetwork Mode \u003d ALLOW SSID \u003d F1comp Key \u003d 12345678

netsh Wlan Start HostedNetwork

Let me use the use of shared Internet access

Right-click on the connection icon, in the lower right corner. Select Network and Shared Access Control Center.

In a new window, on the left, click on the item Change adapter settings. Further attention! Right-click on the connection through which you receive the Internet ( i have this Ethernet, since just a network cable is connected to a laptop)and select Properties.

In a new window, go to the tab Access. Install a tick near the item Allow other user users use the Internet connection of this computer..

Below in the list, select the network that appeared after starting the access point. Most likely, it will look something like the screenshot below.

Click OK.

You can take your device and connect it to the Internet by Wi-Fi, which already gives our laptop.

You can see the Instructions for connecting to Wi-Fi: ,.

The most popular problem is when the device connects to the access point created on Windows 8, but the Internet does not work. Sites do not open. Or, when problems with obtaining an IP address arise.

Decision: Fully disconnect the antivirus, antivirus utilities, firewalls. Most likely, they are blocking the connection. If after turning off the antivirus everything will work, then you need to add a connection to the exclusion of antivirus.

Also, check the internet access settings as in the screenshot above.

How to start the network after restarting a laptop?

You probably have a question, but how to restore the work of the wireless network after restarting the laptop.

Just need to execute the command:

netsh Wlan Start HostedNetwork

As we did it higher in the article. You do not need to enter the network name and password. Only run the network.

We distribute the Internet in Windows 8 using MyPublicWiFi

This is a simpler way. We will start the network via the command line, but using the program MYPUBLICWIFI. This is a free, small program, with an understandable interface, although without Russian. Instead of MyPublicWiFi, you can use Virtual Router Plus, Connectify programs and them like. The principle of work is the same.

Download and install MypublicWiFi. Version 5.1 can download the link (I took the file from the official site http://www.mypublicwifi.com).

Installation standard. After installation, restart the laptop and run MYPUBLICWIFI. If an error appears when starting, click on the MyPublicWiFi shortcut right-click and select Run on behalf of the administrator.

Highlight item Automatic Hotspot Configuration..

In field Network Name (SSID) Specify the name of the network being created.

In field Network Key. Specify the password to be specified on the connection device.

We put a tick near Enable Internet Sharing And select the connection in the list by which your laptop is connected to the Internet.

Click on the button Set Up and Start Hotspot.

You can already connect devices to the created network. If it is, there is no connection to the network, and the Internet does not work, then check the internet access settings (I wrote about this above in the article) And turn off the antivirus, firewall and other programs that can block the connection.

In the MyPublicWiFi program, on the tab Clients. You can see devices that are currently connected to your network.

And on the tab Management You can additionally configure the program. For example, by installing a tick near the item Enable Firewall ... We will disable devices that connect to your network to use to download and distribute files through clients as torrent and those like.

And if you install a tick near MYPUBLICWIFI WILL BE LAUNCHED ON EVERY SYSTEM STARTThe program will run automatically when the computer is turned on.

All is ready! You can use the Internet.

If you have any problems, errors and other difficulties in the configuration process, then you can ask a question in the comments. Describe the problem as much as possible, and we will try to figure out together. Good luck!

More online:
We configure the distribution of the Internet on Wi-Fi from a laptop on Windows 8 and Windows 8.1. Adjust access point Updated: February 6, 2018 by the author: admin.

Permanent access to the Internet has long been customs even for ordinary network users and in modern society without it anywhere. We connect to the network not only in the case of communicating with friends and search for the necessary information, but also to address numerous working issues, not to mention the entertainment (cinema, music) and online games.

Of course, even the most avid Internet officer is not in a state around the clock located near his working or home PC, waiting for an incoming message or an email. But what prevents your laptop or mobile phone to be always online?
Nothing, tell you, because no one has canceled the mobile Internet and network cable.
All this is so, however, how to be in cases where we need high-speed Wi-Fi network connection on all devices?

In this case, a wonderful Magic WiFi tool comes to help - a WiFi distribution program from a laptop on Windows OS.

From now on, all users of the wonderful program will be able to organize their own access point and distribute Wi-Fi from a laptop almost anywhere where they are not. Magic WiFi can be stored on any removable carrier, the program can be launched by a double click of the mouse and immediately begin work. As you already guessed, the software does not need installation, it applies to "portable" by.

Download Magic WiFi for Windows in Russian can be directly from our website. All links are shown at the bottom of the publication.

The weighty plus of this program is that it works great on any Windows laptop or stationary PC (if there is an appropriate network card). The software makes the network card temporarily execute the functions of the router, creating your own Internet access point, running by all client connections by the type of ordinary router.

How to distribute wifi from a laptop

MagicWiFi will be indispensable not only at home when the whole family wishes to enter the network at the same time, but also in organizing working conferences, where you need to quickly establish an uninterrupted connection to the network.

In order to start distributing Wi-Fi from a laptop to us you need to download Magic WiFi for Windows and clicking on the program to run the program twice. Next, we act on the basis of intuition - click on the "Start" button and wait for the operation of the network card to the access point mode.

After that, on any mobile device we are looking for our access point and connect. Password introduce the one that indicated themselves or the default proposed to us.

If everything has passed successfully, the program itself will display a list of all devices connected to it.
Note: In the case when it was not possible to connect from the first time, simply restart the application and check whether the program is not blocked by your antivirus or firewall.

MagicwiFi will become a real salvation for those users who suddenly burned the router, the restriction of the mobile operator took effect, did not pass on time for the next month of the Internet, who needs to urgently enter the network outside their home or workplace and much more.

With the presence of an unlimited tariff, even a very large family can simultaneously enter the network each from its device and at the same time save, but the speed of the network can decrease.

Please note that when distributing Wi-Fi to a large number of devices, you can cancel the password to connect to your improvised network for greater convenience of all its users. Therefore, if you encountered a task that assumes the installation of a program for distributing WiFi from a laptop on Windows OS, then Magic WiFi is an ideal solution that is quickly started and instantly adjusted.