Why the challenge ends without starting. Why is the call of mobile reset? Exhibit preferred network type

If there is no possibility or do not want to talk, subscribers resort to different ways.

SAMI simple causeIn which it is impossible to call the subscriber - it has a telephone off, or the subscriber itself is outside the network area.

If the call passes, but the subscriber does not remove the phone, it is possible that he cannot / does not want to talk, or his smartphone is in silent mode, or a person used the capabilities of his smartphone by choosing the "Priority" option. For example, such an opportunity have the owners of Sony devices - adjusting the volume of the smartphone, you can select one "without sound" modes, "priority", "sound". Just the "Priority" option allows you to filter calls, passing only those in the notebook.

The "black list" formed by the Subscriber will not give him to the unwanted people. If only one beep passes with an outgoing call, and then the call is reset, probably the calling got into such a list; Or he hears short beeps, as if the number is busy, or the message "Subscriber's device is turned off or outside the network area."

This species Communication is not available for the subscriber. What does this mean? - www.Syt / All_question / Other / 2016 / APRIL / 72499/187718

And another picture, if outgoing call Reset immediately, and the calling does not hear a single beep.
In this case, it is possible that the subscriber took advantage of the services cellular operator and turned off all incoming calls; I connected the service "Prohibition of receipt of calls in roaming." In this case, the subscriber can receive SMS messages (that is, they can reach the subscriber), if not turned off and their.

Service "Prohibition of Call" (the so-called "black list"), not only incoming, but also outgoing, offered to connect all operators cellular communication.

After the service is connected, you can independently contribute to the list for unwanted calls. Block the unwanted number forever is also possible.

The inability to reach the subscriber may be due to the fact that it has the iVoICeCallMaster program installed, with which all unnecessary or unwanted numbers are redirected to a sim card that simply does not work.

There are cases when you can not get through to the subscriber, because in the settings of its smartphone, the "blocking of incoming / outgoing calls" is enabled.
For iPhone, it helps in the settings to enable the "Show My Number" option to pass the calls.
If the problem with your smartphone is that it does not miss outgoing calls, it can be restarted (it is useful to occasionally do it), as well as turn off / enable the 3G function (it is possible in the "raw" firmware).

For operating room android systems have long come up with a program that cuts off unnecessary incoming calls or redirects the caller in voice mail. The program is called the Current Caller ID and is suitable not only for smartphones, but also for tablets. To take this opportunity, the Current Caller ID application must be installed on your gadget.

On the Internet there is an opinion that simply included the "Black List" option, without specific numbers in it, does not allow you to reach the subscriber, and only when it is turned off, calls pass, but this is a single opinion that needs verification.

On the phones samsungWhen you try to get through to the subscriber, the "Call is not sent" can pop up. This failure may occasionally occasionally, or with each call. Today we will tell about all possible reasons Errors, as well as about all the options for its solution.

What a mistake?

First of all, it should be said that this failure in this form appears only on Samsung, but the problem is relevant for other devices. The main reason is a malfunction of cellular tag - technical work, weather conditions, interruptions with a signal on the ground. Less less often the problem lies in the phone itself - bat firmware, system litters, etc.

Error when calling "Call is not sent"

Correct failure

Immediately throw the moment with the non-working tower, it is easy to understand: the signal quality can constantly change, the error "Call is not sent" appears periodically, and in times you can even get through. In the extreme case, you can call the operator and clarify the performance of the station. In my case, the error appeared because of the apparatus itself, since the rest received the signal very well. That's what I had to do for correction:

I want to notice right away, it is not worth confused by this bug with a similar error "exceeded the limit", which the caller is reported in automatic mode. This failure is associated with the abuse of calls to free lines.

Conclusion

In my case, I was limited to cleaning, rebooting and configuring my Samsung A5. However, if you do not help you, you need to check the phone for viruses first, you will help. AVG, Eset Mobile Security, Kaspersky, Dr.Web Ligth etc. Next, try reset the application settings. "Telephone" - We wrote as it is done. You can try to call through sourid app, type in the search for the Market "Rock on Android" and get their entire list. The last option remains to check the performance of the SIM card itself - you can simply install it in another phone and try to get through. If everything is in order with it - it may be necessary to flash the device.

In case of any difficulties, describe your problem in the comments, we will try to help you.

I'm typing any number from the phone, I write a call completed, I, I can't get through to anyone, I can send messages and got the best answer

Answer from Appears and disappear suddenly [guru]
Try to do this:
Go to the setup menu, then the call icon, choose General settings, Choose a line, put a tick on line 1 (there was a check mark on line 2).
In the Throughout / Call / General Settings, the "Select line" item is missing. Helped the item "sending your number" in the same menu: "Set the network" (it was "off"). Outgoing calls went!
As an option there is no money on the phone (you either have your interlocutor).
If there is money and the settings did not help contact the first to your operator, and if the problem is not in it, then you have to diagnose in the workshop.

Answer from She-wolf.[guru]
look in the phone settings or in its profile, it is possible to ban outgoing calls.

Answer from Zhenka Zhurov[newcomer]
You need to turn off and enable the phone.

Answer from - [newcomer]
I also have what to do?

Answer from Vlad V.Trov[newcomer]
phone restart you need

Answer from Vitya Tolkin[newcomer]
And if there is no setup call

Answer from Anna Belyaeva[newcomer]
and for some reason I write there is rationing and when you want to call, it shows either wolving or network failure

Answer from Maxim Maxim[newcomer]
I have android 6.0 helped a reset of audio settings to: Settings - Sounds and Notifications - Press the Soft Telephone key - Select Reset. Nothing terrible will not happen. It will only be left to set ringtones, vibrootkliki and everything.

Answer from Elena Mikhailova[guru]
The main thing is not to manage to repair immediately into repair, because, in most cases, nothing complicated, and you can clean it yourself! In detail what to do, and how to fix you can read
gadget-media.ru/no-dial-tone-android/

Answer from [Email Protected]@:) [newcomer]

Answer from Valeria Nafikova[newcomer]
Settings / Other Networks / mobile networks / Access points are looking for their operator and everything should work.

Answer from 3 response[guru]

Hey! Here is a selection of topics with answers to your question: I type any number from the phone, I write a call completed, I, I can not get through to anyone, I can send messages

You scored the number of the person you need, but for some reason when you call the call noise. Familiar? In essence, this is the so-called template break. After all, from the moment the automatic telephone connection appears, the standard subscriber call procedure is as follows - we gain the necessary number, after which the call couple is coming in the tube, which means that the called addressee, at the "Tom end of the Wire", go calls on the telephone. With advent mobile communications this procedure It has not changed almost at all, except that cellular clients can connect the service that will replace the beeps on pleasant music. But what to do when by typing the desired number, you do not hear the usual signals, that is, there is no beeps and why did it happen?! Let's deal with together!

Before switching to any actions, first I still advise you to call back to the room again. Perhaps it was a single short-term failure and connection recovered!

Causes why no beeps in the tube

In fact, the reasons for this phenomenon can be somewhat, but the most basic, because of which the beeps do not go when you call a person, it is either a problem with communication, or broke a telephone. In addition, a lot depends on what connection you use - stationary wired or mobile.

Cable connection (home phone)

Despite the fact that in recent years, a regular wired phone has practically handed over positions, there are still many people who enjoy them. These are mainly elderly, or some firms and organizations.

If you do not go beeps when calling with home phone, I first listen, and whether there is a beep-buzzer when removing the tube. Quite often people take off the phone and dial the number without checking whether telephone communications at all.

When there is no readiness - it usually flashes a break on the line from the distribution cabinet to the phone, or problems with the cable from telephone station to the cabinet. The malfunction could provoke various earthworks carried out next to telephone line, breaking the cable in bulk technique, flooding of junction boxes and cabinets, etc. While the montior does not restore the line - there will be no connection.

By the way, quite often damage the line occurs in the apartment. For example, the Wire randomly broke the children, the cat is noraine and he flies about something.

Mobile communication (cell phone)

When there are no beeps when calling with mobile phone, Most often, this means a cellular failure caused by the fact that you are in the zone of the unsurevertent signal, or in general there is no coverage of your telecom operator in this place. In this case, "No Signal" appears on the display.

Try to overpow the number several times. Sometimes it helps the reboot of the telephone.

It happens that the culprit of the problem is wrong work Phone itself. For example, some application is installed that blocks incoming calls.

Unfortunately, in cases where there is no beeps when calling due to breakdowns cell phone Or a smartphone, a different way out, how to carry it into repair - no.