" " Error " Installing Windows on the this disc impossible "

Error "Installing Windows for this disc is impossible"

Sometimes when installing Windows 7, 8 or 10, you can encounter a problem that is that when trying to install the system on a hard disk, the system issues a warning: "Installing Windows to this disc is not possible. Perhaps equipment this computer Does not support the download from this disk. Make sure the controller of this disk is included in the menu. Computer BIOS ».

The problem is usually characteristic of old computers and laptops, but occasionally manifests itself on a new hardware. This happens as a rule in the event that bIOS settings Computer In the hard disk parameters mode Ahci. or any other other than IDE. Therefore, we go to Bios. Computer and install the mode of operation of our disc as IDE. Usually this setting is in section Integrated.Peripherals. or Advanced, and she is usually called SATA.RAID /Ahci.Mode., SATA.Mode., SATA.Ahci.Mode.,Configure.SATA. Or another, similar to the sense.

I also met this method of deactivation of the regime:

1. We switch the mode using the setup AHCI MODE CONTROLin mode Manual.
2. At the same time, we have an accessible setting. Native Ahci Mode.which we need to switch to Disabled..

With the message "Installing Windows to this disc is not possible" at the installation selection selection operating system You can encounter if not supported Loading from selected data media. The reason that determined such an obstacle, the installer reports.

Reasons Such a problem may be several:

• worn out or damaged SATA cable;
• disabled Hard disk controller in BIOS;
• fault the data carrier itself;
• absence As part of a distribution Windows Driver AHCI;
• not suitable format BIOS - UEFI or LEGACY - disk partition style - respectively, GPT and MBR.

About two recent problems Let's talk more.

Problem with Ahci.

The appearance of the SATA controller of the AHCI data carrier, which came to shift at one time old IDE, led to an additional demand To the composition of the WINDOVS distribution - the presence of the appropriate drivers. Support for the AHCI driver is declared in OS versions, starting with Vista.

But not always Windows 7 wants to be installed on a computer with active regime AHCI SATA controller. Exit here two - change Distribution (drivers Ahci can be cut with packers pirate assemblies) I. aHCI switching On the old IDE mode. In the latter case, you must enter the BIOS, find the SATA controller settings section (partitions can be called "Integrated Peripherals", "Storage Configuration", etc.) and change the preset AHCI on the IDE.

MBR transformation in GPT

Windows is not installed if the disk has not the style Sections:

• GPT., while the UEFI interface in the BIOS is disabled;
• MBR, whereas uEFI mode WINTOVS is active and installed from the loading of the UEFI carrier.

The last case is the most common: everything is faced with him who, or replaced motherboard for new with bIOS support UEFI, or connected To the assembly of PC hDD discs or SSD with MBR markup. There may also be two options out of the situation:

• refuse from the advantages of UEFI, disable this interface in the BIOS (Switch to Legacy) and continue installing windows on the MBR drive;
• transform His GPT.

If there is no important data on the hard disk, conversion From MBR in GPT will be implemented automatically WINDOVS installer. To do this, at the option of selecting the installation site, you need to delete all having sections.

And as a place of installation point Whole unoccupied space.

You need to complete the process reinstalling Windows, return to old system and set This program. Or boot with LiveDisk with Aomei Partition Assistant. As part, if access to old windows is already impossible. Program Developer - Aomei - provides Ability to create emergency boot media With its products on board. To create such a media, you need to use another product of the company - Aomei PE Builder. Aomei Partition Assistant Also among other software systems is included in LiveDisk Adminpe.

To transform Disk from MBR in GPT, perform steps as on screenshots below.

After converting styles of sections anew run Installing Windows.

Transformation GPT in MBR

If there is a question of reverse - for example, motherboard do not support BIOS UEFI, but the assembly of components entered HDD or SSD with GPT markup, nothing will remain any like transform Its in MBR. This can be done by the same ways that are described above for the reverse process:

• way removal All sections with the Windows Installer, if there is no need for data stored on the data disk;
• via programs Aomei Partition Assistant.

To convert a Disk from GPT to MBR, we do the same steps as in previous section Articles, with the only difference that this time we run, respectively, the opposite operation.

During the installation of the operating system, at the formatting stage of disks and create partitions, the user may encounter an error "Installing Windows to this disc. Perhaps the computer equipment does not support the boot from this disk. Make sure that the controller of this disk is included in the computer's BIOS menu.

Why does such a mistake arise and how to fix it?

Ways to solve the problem

Often, an error when it is impossible to create a partition to install a new operating system, it occurs on old PCs with Windows 7. However, other operating systems starting with XP and ending with Windows 10 are also not insured against such a malfunction.

The following factors may be the cause of such an error:

• Incorrect settings of SATA operation parameters;
• Equipment specificity (availability of additional SSD and SCSI cards).

Method number 1. Through Biosa settings

To fix this error, it is worth loading into the BIOS and set the mode of operation of the hard iDE disk. To do this, carry out the following:

• Restart the PC and press "F8" several times to get into the BIOS.
• We find the "Advanced" or "Integrated Peripherals" section and select "SATA MODE" or "SATA RAID", "CONFIGURATION SATA" in it (path to settings depends on the motherboard model). Change the mode of operation with AHCI or the other on the IDE.

• Click "F10" and reboot PC. We repeat the installation of the system.

If your PC has new firmware BIOS, then instead iDE mode It is necessary to include EFI boot. To do this, carry out the following:

• Loading in Bois-UEFI and go to the "BOOT" section. We find the item "UEFI / LEGASY BOOT" and set "Enabled".

• We maintain changes and reboot PC.

It is worth noting that this change is not excluded the emergence of a new error, which is associated with sections MBR or GTP.

If an additional cached SSD or other drive is installed on your PC or laptop, it is possible that the problem occurs exactly because of it. To correct the problem, perform the following actions:

• Determine the model and version of the device. Go to the developer's website and download the drivers that are sealed to the archive, and not laid out by a separate EXE. File.
• Unpack files on the USB flash drive.
• Run the installation of Windows. At the stage of selecting the volume, click on the "Download Drivers" button.

• A new window will open. Press the "Overview" button and specify the path to the drivers. Click "OK" and "Next".

• We repeat the attempt to select a volume to install the system.

Method number 3. If the error is associated with GPT or MBR format

If you have an error "Installing Windows to this disk during installation of Windows 7, 8 or 10. Selected disk has style gPT sections"It is worth changing the GPT format on the MBR. To do this, perform the following actions.

• Keep all the data from the disk C, as it will be formatted. Also will not prevent information from local disk D.
• Open command line With administrator rights and enter the following commands:

1. diskpart;
2. list DISK;
3. select Disk number (specify the disk number to which you will install Windows and what problems arise);
4. clean (will be cleared of the entire disk);
5. cONVERT MBR (changed format);
6. exit.

After formatting the partition it is necessary to restart the PC and repeat the attempt to install the OS.

You can also perform the same actions more simple way. In the BIOS in the "BOOT" section in the UEFI / Legasy Boot point and set Enabled, and in " Secure Boot"- disabled. After that, delete all sections and create new ones. The format will automatically be changed.

How to remove the window "Make sure the controller of this disk is included in menu Bios. Computer "during Windows installation

During installation of Windows "Make sure the controller of this disk is included in the menu bIOS Computer»

Sometimes it happens that during Windows installation at the stage when you need to select the section hard diskTo which Windows will be installed, an error "Make sure that the controller of this disk is enabled in the computer BIOS menu. Naturally, the installation does not go.

Error text

From this article, you will find out what it means and how to fix the problem with the hard disk controller.

Why does this error appear?

The options for the message "Make sure that the controller of this disk is enabled in the computer's BIOS menu.

One of the most likely that incorrectly exposed in BIOS mode hard work disk. There are two main modes - ACHI and IDE, which we wrote about the article.

Sometimes on new motherboards The appearance of this error contributes to the UEFI / BIOS option boot Mode..

Less often, but also another situation. This is damage to the hard disk boot record and in this case it will be required to restore it.

How to fix "Make sure the controller of this disc is included in the computer's BIOS menu"?

Options for eliminating this problem as much as causes.

First you need the hard disk mode. If IDE (COMPATIBLE) is standing, then enable AHCI, and if AHCI is worth, switching to IDE (Native Mode).

Switching hard disk mode - option 1

Switching hard disk mode - option 6

Switching hard disk mode - option 5

Switching hard disk mode - option 4

Switching hard disk mode - Option 3

Switching hard disk mode - option 2

If it does not help, it is worth checking the UEFI / BIOS BOOT MODE option. If it is, it is worth putting it the value "Legacy" or "Legacy First".

Switching the loading mode on Legacy

After all changes to the BIOS, do not forget to save them with the F10 button.

The last option is worth trying to check and restore the boot record hard disk.

To do this, click "SHIFT" + "F10" when the error appears "Make sure that the controller of this disc is included in the Computer BIOS menu. By this you run the console.

Restoring boot record across the console

• bootRec / FixMBR;
• bootrec / fixboot;
• bootRec / RebuildBCD.

The best way Thank the author to the article - make a repost to my page

Sometimes windows installations, Including the 10th version, the error message is displayed on the screen. The text of the message is: "Installing Windows to this disc is not possible." Wherein hDD The BIOS is displayed. It is also visible at the stage of installation of the operating system, where it could be divided into sections.

Such a problem occurs for two reasons:

• the controller in the BIOS (AHCI mode) is disabled;
• hard disk has that GPT.

Problem with AHCI mode

In addition to the error message informing that it is impossible to install Windows 7 or 10 to this disk, with difficulties with the AHCI mode, the computer cannot boot from the selected disk. The reason is that the controller may be disabled in the BIOS.

The problem is solved as follows:

Problem in GPT format

Another reason for the impossibility of installing Windows 7th or 10th versions with the display of this message can be GPT - format section hard disk.

More recently, all the hard drives were the same type. The only partition of the sections was MBR. For the past few years, manufacturers gradually go to the release of Winchesters with a GPT format. And here boot files The OS is not modified under new formats, and as a result, the above error appears when installing.

MBR (Home boot record) - this is program code and the data required for the pre-start of the computer. They are in the initial marked sector of the Winchester. Start MBR begins after the initial analysis BIOS performance All devices. The main feature is the definition of the location of the files that are needed to load the OS.

GPT - new standard The format of placement table of volumes. The standard built-in interface was also developed software For computers replacing BIOS. It was called UEFI (Unified Extensible Firmware Interface).

The problem arises due to the fact that the OS installer cannot be installed Windows into the specified partition, due to the fact that it does not fit the partition table.

There are 2 methods of fixing the problem:

• installing a system to a similar disk;
• conversion of the section in the MBR.

The choice of method must be due to the following rules:

• if the computer supports the UEFI interface and it is necessary to implement the 64-bit OS (for example, Windows 10), it is recommended to apply the first option. Check for the presence of the UEFI interface is very simple. Graphic mode with the ability to control the mouse says the presence of UEFI;
• if the computer is released several years ago, it has a BIOS and you need to install a 32-bit operational system from Microsoft, then you should spend transformation GPT. in MBR.

Using MBR limits some features such as:

• their volume can not exceed 4 TB;
• the maximum number of volumes on HDD is limited to 4.

Installation of Windows 7, 8 and 10 on GPT

Problems When installing OS on GPT Tom usually occur with those who want, install Windows 7, 8 and 10.

To install OS on that GPT, you must perform 2 conditions:

• install 64-bit system (for example, Windows 10);
• perform download to EFI mode.

If the first condition is not performed, which should be prepared boot UEFI storage device.

But in most cases, not only the second condition is not performed. Therefore, it is advisable to immediately go to the BIOS and check the settings.

The BIOS should set two parameters:

• enable UEFI boot;
• switch SATA mode in AHCI.

After saving the parameters, you can install the OS. Error will no longer repeat.

Tom GPT Conversion in MBR

Options for converting volume styles are several. Consider them in more detail.

Conversion to MBR when installing Windows through the command line

This method is optimal for use in a situation where the installation of OS, such as Windows 7, 8, 10, is impracticable due to the type of GPT volumes. It can also be useful not only when installing the OS, but also with the regular operation of the OS to convert non-system partitions.

We should not forget that when converting sections, all information from them will be lost. Therefore, all important is recommended to save in advance on the external medium of information.

To change the style of volumes with GPT in the MBR via the command line you need:

• start the command line in Windows from the user with administrative rights;
• to display the list hard disksconnected to the computer, enter the command "diskpart" and "List Disk" command;
• select a disk to change the style by the "SELECT DISK D" command, where D is the disk number;
  Then two options for the development of events are possible.
  1. perform a complete disk cleaning with the "Clean" command. At the same time, all TOMA HDD will be removed;
  2. you can remove the HDD volumes by one using the Detail Disk commands, Select Volume and DELETE Volume commands;
• run the disk conversion in the MBR command "Convert MBR";
• send from diskpart by selecting "Exit". Close the command line. After that, it is recommended to continue installing the operating system. The message about a similar error will no longer appear.

Create Tom on HDD You can choose from a volume selection window to install the item " Configure disk».

The change in volume style is completed.

Changing the style of the GPT on the MBR using Windows Disc Control

The alternative method of conversion of volumes requires a normally functioning Windows 7, 8 or 10 on personal Computer. You can only convert a disc that is not systemic.

The sequence of action on the conversion of Tom HDD is as follows:

Utilities for changing the style of the section

Besides standard methods The transformations of the HDD volumes provided by Microsoft developers can be used third-party utilities control volumes of hard drives such as

Video on the topic