Installing xp from disk to computer. Methods of traditional and automatic installation of Windows XP from disk. Changing the priority of downloads

Reinstalling the operating system allows you to correct the accumulated work errors, reformat hard drives, fully clean the registry. Windows XP is recommended to reinstall once every six months.

Step 1. When you turn on the computer, log in to the BIOS and install your drive first on the priority of the download device.

On a note! You can boot from the drive and in other way: during the procedure "POST »Enter the download menu and select Your Primary DeviceCD-ROM orDVD-ROM.

Step 2. During installation, you will be prompted to download specific drivers for SCSI or RAID devices. These drivers are used for server Systems, so for home Computer This item can be skipped.

Step 3. Familiarize yourself with the End User License Agreement (EULA). To confirm the consent, press the F8 key. In case of failure (ESC), the installation will be interrupted.

On a note! The agreement has several points to which few people pay attention. For example, according to the specified document, you have the right to copy the installation disk for no more than two times per paid license. This can be avoided by various litigation associated with the use of unlicensed copies of distributions!

Step 4. Check out your hard drive. To install in the selected section, use the Enter key and go to step 7. If you want to change the number of volumes, go to step 5.

Step 5. Create the desired number of logical partitions (volumes) hard disk By pressing the "C" key. Specify the size of the new volume.

Step 6. Specify logical diskto which you want to install XP.

Step 7. Note the option formatting hard disk.

Important! Preferred to choose full formattingrather fast, since it is checked for damaged sectors. Note that when installingXP selected for the installation volume is completely cleaned!

Step 8. Wait until the end of the section formatting.

Step 9. Wait for the copy process system files.

Step 10. To continue, a reboot is required, as a rule, it occurs in automatic mode.

Step 11. After loading, the system installation process starts directly.

Step 12. At the request of the installer program, make the setting of the regional parameters you need.

The default layout is desirable to specify the one you use most often. It can be changed after, in the already installed system.

Step 13. Software accessories setting are needed for later displaying the name of the right licensed right in Windows XP.

Step 14. At the request of the installer program, enter the key. As a rule, stickers with licensed keys Locked on the computer case or on original boxes for installation disks.

Step 15. Come up and enter the computer name (required parameter), as well as a password for account "Administrator" (option is optional, but better to specify).

On a note! If your computer is not in the network working group or domain, you can specify any name. In the opposite case, you should use the name on the Latin, while monitoring it does not match the previous one, otherwise there may be problems when connected to the domain controller or other computer.

Step 16. Specify the dates and time settings.

On a note! When installing old versionsXP may have a problem with time zones. Currently canceled winter and summertime, and in the system these transitions remained. To avoid them without installation additional updates Specify your time zone for another country (for example, in place of Moscow, specify Istanbul).

Step 17. Network parameters are set as follows: If your computer must have a static IP, check the "Special Parameters" option. In the case of selecting "Ordinary Parameters" network address of your computer, gateway and dNS server will be assigned automatically.

Step 18. Specify a domain or network group to which your computer enters. Default - Workgroup.

Important! If you need to connect to the domain, it is better to specify it immediately when installing - this will allow you to quickly get all the operating system updates, security parameters and standard settings workstation.

Step 19. Wait until the installation is completed.

Step 20. At the request of the computer, give the system consent to automatic setting Screen parameters.

Step 21. Note the desired option in the screen resolution setup wizard.

Step 22. According to the instructions, make the final setting of the operating system.

Step 23. Note the desired system update option.

Important! Technical supportWindowsXP was discontinued in 2014, respectively, there are currently no updates, with the exception of particularly important, for example - protection against encryption viruses.

Step 24. On request, make registration of your copies of Windows In Microsoft Corporation. In fact, this feature opens access to all updates of the system.

Step 25. Specify computer users.

On a note! Users need to be specified even if your machine is in the domain, since the record data relates only to a specific workplace.

Step 26. Complete the installation wizard.

Step 27. After the end of the process windows installations You need to update the drivers to all devices.

Conclusion

We looked at the main points of the installation of the OS, however, do not forget about the installation difference on the "Stand-Alone" machine, and the station in the domain. Try to update your system drivers as often as possible to maintain stable operation.

Video - Installing Windows XP

It seems why, when almost all owners of desktops and laptops switched to latest versions OS, you need installing Windows XP from a flash drive. But it is no secret that popular netbooks are not equipped with an optical drive for reading CD / DVDs. But even this is not the main thing. Most of the netbook "do not pull" the seven. And setting more early version The operating system will help improve performance. You can use the external DVD drive, but why buy such an expensive device, if there is a normal flash drive. There are several ways to create a bootable Flash drive to put XP. It is about this that we will talk.

Initial data

For windows installations XP on a netbook first should be prepared. We will be needed:

Flashka volume from 1 to 2 GB.
CD or image with operating system Windows XP.
Desktop computer or laptop.
Distribution for creating a loading flash drive.

If an OS image is used, it must be unpacked and saved entirely files in a separate folder.

Format flash drive

Flash drives are used for different tasks and devices. file system. The same drive will be read on the computer, but, for example, a DVD player can no longer see it. In a word, for our tasks you need a definite USB file markup. And make the desired storage markup different ways. Consider one of them.

Windows tools

Everything is simple here. To do this, perform some sequence of actions:

The program will work and reformat the USB device to the desired markup.

Now, to install Windows XP on a netbook from the flash drive, it needs to be bootable. There are several ways for this.

Create a bootable USB flash drive with WinToflash

Novicorp WinToflash. - makes it possible to create boot USB drive With such versions of OS, like XP, 2003, Vista, 2008, 7. With it with a flash drive on a netbook, laptop or desktop computer You can install Windows. The capabilities of the program are expanded by:

transfer WinPE;
destruction of data from Full or Quick drive;
creating a boot disk from under DOS;
creating a Live CD / DVD flash drive.

Moreover:

it is possible to select a Russian-speaking interface;
two modes: Master mode, with which are created windows flash drives XP, and advanced;
support program on the Russian-language site;
oRTABLE version allows you to work on different machines;
the weight of the program is only 10 MB;
completely free.

So, proceed to the creation boot flash drive:

When the work of the master WINTOFLASH. Ends, you can get out of the program. The bootable Flash drive is ready and the next step is to install Windows XP on the netbook.

Ultraiso program

Among those Russian users who installed another OS, the program is successful Ultraiso..

From what this program can do, you can note:

The ability to adjust the CD / DVD image, for example, to remove the file or the entire folder from it.
Add or delete a folder or file.
Create an ISO image of any document.
Optimizes files to save space on disk.
Supports a large number of Types of images.
Creates its own virtual drive and much more.

In addition, the program supports Russian and compatible with such popular emulators as Daemon-Tools. and Alcohol 120..

So, for our work, we need the image of Windows ISO and Flash Drive.

Check the contents of the flash drive or all data from it will be erased.

We will proceed to creating a boot flash drive, for this I will perform a sequence of actions:

The process of creating a boot disk for any computer, laptop and netbook will begin.

I exhibit the first download in the BIOS with USB

Installing Windows XP from a flash drive is the same as with the installation CD / DVD disk, but it is previously necessary to set the OS load priority to the BIOS. For this, you must need a signal from a USB drive. If it is not connected in advance, then in the options for loading the OS it will not be visible.

Now we will deal with the priority of downloads:

After rebooting, the netbook will start loading the OS with the created Windows XP flash drive.

Errors when installing Windows XP from a flash drive

But not always the first launch of the installation flash drive is successfully, and the OS is not installed. You can list the main reasons for the Windows XP installation reset:

Equipment conflict in incompatibility of laptop devices.
The media itself is damaged.
Not suitable drivers For this equipment.
Activator problems.
Incorrectly selected program to create boot drive.
Often the Windows XP installation program failure from flash drives is because it is formatted incorrectly.
Equipment conflict while trying to use uSB login 3.0, while the installation program such extensions are not supported simply because there are no such drivers. And not a fact if uSB port Supports both modes, the installer will be able to understand it.

Now consider whether to install Windows XP without additional settings Bios, what errors may occur during installation, as well as ways to solve them.

Not always after creating a boot drive, it is possible to install the OS from it. For example, this situation is possible when the authorization of the boot device has passed successfully, and the process of loading the drivers, but the text appears on blue screen. There can help a small BIOS reconfiguration. It needs to find item " SATA MODE."(" ") And change priority. Instead of " ATA»We put a priority for" Ahci." We save changes and reboot.

If it is not installed again, it is necessary to return to the BIOS again and in the section " IDE Configuration."Switch to B. iDE mode. Such a problem may occur when installing a system with outdated flash drives, for which the system cannot find the appropriate drivers. If this item is not visible, then most likely another version of the BIOS is installed. In this case, we find the tab " Advanced" Go through the line " ONCHIP SATA TYPE"Where we change the priority with" IDE Ahci." on the " Native IDE».

There is another option. On the tab " Advanced»Find a line" IDE Configuration."And in the section" SATA OPERATION MODE.»Change with" Enhanced" on the " Compatible».

It may happen that already at the installation stage from the hard disk, the computer is suddenly rebooted. Will help the reverse tuning in the BIOS on " IDE Mode." Reboot.

Another situation. When installing a netbook may notify: I can not install, you need an ASMS file. To solve this problem and install Windows, the second line is selected in the first message when downloading from the window. And in the selection window - " FIRST PART ..." After the files rewind on hDD, and the netbook will reboot - all the same, but choose " SECOND PART ...».

It may be that when loading from the flash drive, a warning appears. To install the system, the creation of a bootable flash disk with another program will help solve the problem. For example, you can download and install WinsetupFromusb..

If the system is not installed, the occasion may be a conflict of equipment. The laptop system itself will display the error code.

It may happen that the installation program issues a message: Error code 0x80070017. Cause of failure:

damaged USB input;
unreadable flash drive (error code0x80070570);
incorrectly compiled distribution.

Conclusion

When installing Windows XP from the flash drive is interrupted by the message to the installation error computer, then this is not a reason for panic. It is worth a carefully to repeat all operations to create an installation flash drive. Read the appropriate forums where specialists can give advice. In any case, if the problem is not physical damage Equipment, finding ways to solve is always possible.

Video on the topic

In the last article we talked about. And now I will tell you how to set up BIOS Computer To install Windows from a disk or flash drive.

1. What is BIOS and UEFI

Each motherboard It has special program To download the computer and setting the parameters various devices. This program is stitched (programmed) into a special chip on the motherboard and is therefore called the firmware.

Previously, all motherboards had a firmware called BIOS, which had a simple graphical interface with white letters on a blue background and was limited in functionality. For example, in Bios it was impossible to use a mouse, select a language and there were no graphic elements (pictures) in view of a limited BIOS memory chip. Also, BIOS motherboards did not support more than 2 TB discs due to the restrictions of the old disk markup system (MBR).

Now many motherboards have a new firmware type, called UEFI, which is characterized by improved graphical interface Using a beautiful background, drawn buttons, the ability to select language (including Russian) and some improvements. For example, supporting a new type of disk partitions (GPT), which allows you to use hard drives with a volume of more than 2 TB.

What type of firmware has your motherboard, you can learn in the manual for it, on the website of the manufacturer's motherboard or laptop, and visually when entering the Setup setup program. The SETUP program is also stitched to the motherboard and is used to change the BIOS or UEFI settings.

2. How to enter BIOS Setup

To enter the SETUP program, you need to start the "Delete" button on the keyboard immediately after the computer is turned on. On some motherboards and laptops, the "F2", "F10" or "ESC" keys are used for this. What exactly click the button can be read in messages that appear immediately after the computer is turned on.

In text form

In graphical form

If you do not have time to read, press the "PAUSE" button on the keyboard to pause. You can continue the download by pressing any key. If you press the key designed to enter Setup, then immediately get into the motherboard configuration program.

Classic BIOS.

UEFI interface

3. Basics of work in SETUP

3.1. Control keys

The SETUP program is a set of different parameters grouped on separate tabs, depending on the destination. On the right or below will be the description of the keys with which all actions are made.

For the transition between tabs, arrows "to the right", "left" on the keyboard are usually used. To move between lines within one tab, arrows "down", "up" are used.

To change the values, you need to go through the arrow to the desired field, press the "ENTER" key, and then using the arrow to select a new value from the drop-down menu. For this, the +, "-" or "Page Up", "Page Down" can also be used.

To return to the level up or to the previous page, press the "ESC" key. The "ESC" key on one of the main tabs will mean exit from the BIOS without saving the settings you want to confirm or refuse to exit.

In the SETUP program with the UEFI interface, you can perform all actions using the mouse.

3.2. Saving settings

This is very important moment. After making all the necessary settings, go to the "EXIT" tab, select the arrows "EXIT AND SAVE CHANGES" ("Exit and Save Changes", the order of words can be different), press "ENTER" and confirm the save settings by selecting "OK" arrows or "YES" and again "ENTER".

You can save the settings much easier and quickly pressing the "F10" key on the keyboard and confirming your solution. This key works in many versions of Bios, UEFI and is often indicated in the prompts (bottom or right).

3.3. Cancel set

If you accidentally changed something or not confident in the correctness of the settings made, you will pass on the "EXIT" tab and select "Exit and Discard Changes" ("Exit and Cancel Change") or press the "ESC" key until the output message appears without Settings changes and confirm the action ("OK" or "YES").

3.4. Restoring settings

To restore all settings to optimal default values, pass on the "EXIT" tab and select "Load Setup Default" ("Download Default Settings"). After that, you can immediately change other settings or simply exit BIOS while saving the parameters ("Exit and Save Changes" or "F10").

4. Download options

Insert the boot disk or USB flash drive to the computer you plan to install Windows. Now in order to start installing Windows, you need to configure the BIOS (or UEFI) using the SETUP program to download from the disk or flash drive. Also, you can use a special boot menu of the motherboard (Boot Menu). The last option is easier and more convenient, but we will look at both ways.

5. Setting up BIOS.

5.1. Changing the priority of downloads

Click the Boot or Download tab.

Install your DVD or USB flash drive in loading devices.

If you install Windows from the disk, then select the "ATAPI CD-ROM" type device, the name indicating the manufacturer or drive model. For example, "CDROM: PM-HL-DT-STDVD-RAM GH22NP" (this is a "LG" DVD).

If you plan to install Windows from a flash drive, then choose something like "Removable Dev." or the name of the flash drive indicating the manufacturer. For example, "USB: Patriot Memory" (this is a flash drive "Patriot").
TRANSCEND JETFLASH 790 8GB

The second must be a hard disk, which is indicated as "Hard Drive", "HDD" or the interface to which it is connected, a manufacturer and model of a disc. For example, "SATA: 3M-SAMSUNG HD502HJ" (this SAMSUNG hard disk per 500 GB with SATA interface).

Please note that in the "Boot" section there may be other items responsible for the loading priority, such as "Hard Disk Drives" or "Removable Device Priority".

They also need to check the DVD drive or flash drive in the first place.

If you have two hard diskThe higher should stand the one to which you install the system. But in this case, I recommend one of the disks to disable to avoid confusion and possible errors in installing the system. It can be connected after installation.

In the SETUP program with the UEFI interface, everything is done similarly. Look for the "boot" or "download" section, find your DVD-drive or flash drive there and raise them at the top of the boot priority. Plus, for this you can use the mouse, which is easier and more convenient.

5.2. SATA controller operation mode

This in principle is not so important, but many are interested in this question, so I decided to clarify it a little. SATA discs Can work in compatibility mode with older IDE drives and in more modern AHCI mode. AHCI gives a small increase in hard disk performance with multiple simultaneous appeal to it. This mode of operation of the disk occurs mainly on servers and for a regular home computer is practically useless.

When configuring the BIOS, you can select the SATA controller mode.

These settings can be in different places and differ somewhat in the names, but the principle is one everywhere. You are invited to compatibility with IDE or new AHCI mode.

In general, the IDE compatibility mode is recommended for Windows XP, since it originally does not have SATA drivers and simply see a hard disk that will not allow you to install Windows. Drivers can be embedded in the installation windows DistributionBut it makes no sense, since it will not affect the speed of work, and it can add problems.

There is a simpler and convenient way to boot from a DVD or flash drive for both BIOS and UEFI - download using "Boot Menu" ("Download menu").

To call the download menu, the "F8", "F10", "F11", "F12" or "ESC" can be used. They can often be seen in the prompts on the initial screen loading screen. You can learn this information from the instruction on the website of the manufacturer of the motherboard or laptop, searching on the Internet or a tyk method.

Immediately after turning on the computer, clamp and hold the "Boot Menu" call before the boot device menu appears.

Using the "Down" and "Up" arrows, go to a DVD drive or a USB flash drive and press "ENTER".
SanDisk Cruzer

The advantages of such a way are obvious - you do not need to dig into the BIOS, you do not need to return the BIOS settings back (although it is not always necessary) and just call this menu just once, since after the Windows installation starts it is no longer required. In addition, the use of "Boot Menu" does not change the BIOS or UEFI settings.

7. Download problems

Friends, due to the fact that many have problems with downloading when installing Windows and some have written about it in the comments, I decided to make a separate section where I gathered my ways to solve these problems.

If the computer download stops at the very beginning and asks to press F1, after which it is included in the BIOS, you most likely either a battery panel at the motherboard (it may be born), problems with the processor cooler (failed, connected it there) or a hard disk (errors in SMART).
If the "Reboot and Select Proper Boot Device OR" appears when the PC is turned on Insert Boot Media in Selected Boot Device and press A KEY "This means that the boot area on the disk or flash drive is not found or damaged. Try to boot S. installation disk Or flash drives using Boot Menu (Section 6 of Articles), if you do not help make the bootable media using the Windows USB / DVD Download Tool utility.
If after restarting the computer, installing Windows is first read, then remove the boot disk or flash drive and restart the computer, the installation will have to continue from the hard disk.
Disconnect all unnecessary USB devices from the computer (USB, 3G-modem, smartphone, printer). You only need to leave the mouse, keyboard, DVD or flash drive from which you install Windows.
If you have a few hard disks, Discover all discs from the motherboard, in addition to which Windows installation will be installed.
Reset the default BIOS settings (described in this article).
If the installer does not see the disk or an error 0x0000007B appears in the end. Change to BIOS mode SATA controller with AHCI on IDE or back.
If, with each download, the computer or laptop itself enters the BIOS or opens the download menu, then set the BOOT POP MENU option to the Disable / Disable state (if any).
Turn off the Fast Boot in the Advanced section in the BIOS, and in the Boot section, set the Launch CSM option to Enable / Enabled (if any).
In the BOOT section in the BIOS, change the boot mode with EFI (UEFI) on Legacy (if any).
Install in the BIOS option Secure Boot In the Disable / Disabled state (if any).
Select the version of Windows installed in the BIOS (if any).
If you have a laptop, one version of Windows is installed, and the other no and you did not help the BIOS configuration tips, please contact or on the manufacturer's forum. A BIOS update can also help, after which additional options may appear (P.8-12).
If possible, from a DVD disk, since with flash drives there are many different problems.
Make out.
Insert a USB flash drive into USB 2.0 connector on the back of the computer (motherboard) or a laptop USB 2.0 connector. Loading from the USB 3.0 connector does not work.
Try to use Boot Menu, as described in P.6 of this article. This way is easier, reliable than setting up the priority of downloads in the BIOS and you can determine if the computer sees your flash drive.
The lower underscore on the black screen suggests that the computer freezes at the time of contacting the flash drive or to the hard disk. If without flash drive loading is Further, then it's exactly in it.
If the computer does not see the flash drive or does not want to boot from it, use a DVD or other flash drive to install it.
If such a possibility is not, then change the type of flash drive with "Removable Media" to the "Hard Disk" using the Bootit Next Generation utility, format it with the "HP USB Disk Storage Format Tool" utility and re-boot with "Windows USB / DVD Download Tool. " You can download all these utilities below in the "Links" section.
If the problem occurs already after selecting the Windows installation section, use the BIOS setup tips (P.7-12). Delete the old partitions from the disk or make it using the boot acronis disk Disk Director.
If the installer reports that it cannot install Windows to the disk, then try or back.

I remind you that to exit the BIOS to save the settings, use the F10 key.

8. Links

In the following articles, we will look at how to install, and.

SanDisk Cruzer
TRANSCEND JETFLASH 790 8GB
SanDisk Cruzer

Need B. reinstall windows It may be necessary for a number of reasons: damage to the previous OS data, the need to clean the computer, installing the update, solving various problems, and so on. Consider the details of the nuances of this procedure.

Preparatory stage

Reinstalling Windows XP implies full removal Data S. system Disc. Therefore, it is pre-keeping all valuable documents. You can archive them and transfer to removable media or download to cloud storage. All programs saved passwords, personalization settings, license information and any other information. Their restoration in the future will be impossible, so the files must be saved.

You also need to prepare the drivers for network adapterIf it is not embedded in the motherboard. Usually, complete to devices of this type report installation discs. But you can download the appropriate files from the Internet. Otherwise, this option is possible that the PC will not enter the network.

Creating a boot disk

To create a boot disk, first of all, you need to find the WINDOVS XP working assembly and download it to the computer. Further actions will vary depending on which carrier it is planned to record.

Option 1: USB flash drive

There are a large number of programs that can write the image of the OS on the removable medium. In this case will be considered WinsetupFromusb..

Option 2: Optical disk

Ultraiso. - A popular program for working with discs. With its help, it will be necessary to record the image of the system on a blank. For this purpose, according to this manual:

PC Setup

When preparatory actions are finished, you can move directly to pre-configuration Computer. To start, insert the disk from the OS in optical drive Or connect the USB flash drive. Now you need to activate the loading of the PC not from the hard disk, but from the removable device.

For this discover Bios.. This is done when the computer is rebooted. Once the image appears on the screen, press the button repeatedly Delete. on keyboard. If it does not work, then look at the inscription when you turn on the PC, there must be prompts to enter this mode.

In BIOS, you should open the BOOT tab and go to Boot Device. Priority. In the above menu, you need to put a USB flash drive or disk.

Then returned to the initial screen and exit with the save settings (Save Changes).

The computer will reboot. After a while, the bulk of the procedure will begin.

Note: In most versions Bios. There is no possibility of entering the mouse. Use arrows and other keyboard keys. But it may not work if connected via USB. In this case, you need to connect the device with PS / 2 connector.

Preset procedure

When the inscriptions appear on a black background, select Installations (keyboard arrow) and click ENTER.
Now it remains easy to follow the prompts on the screen. The process may seem complicated, but in reality everything is very clear.

To begin with, accept the terms of the license agreement (button F8. on keyboard). In our case, the PC already has a Windows XP operating system, the computer will propose to restore it. Need to refuse by clicking ESC.

Now there is a choice of a system disk for installation.
Assign the one on which WINDOVS was previously stood. There will be messages that it is undesirable to install two OS into one section. Ignore this warning (button C.).

And here there is a choice: the first option is to leave all data on the disk, including the system files, the second option is complete cleaning. It is advisable to use the last option, in which case the procedure will accurately pass successfully.

Preferably choose standard method formatting. It takes longer (approximately 10 minutes), but performs full cleaning of HDD with recovery damaged sectors, if possible.

When the formatting procedure is completed, copying system files will begin.
Then follows the reboot of the computer. Wait for launch, then the installation will continue.
In the process, various windows with parameters will occur: setting up a language, user name, system revision, password, and so on.

Note: The password will be required every time you reboot the PC or output from the user. But you can leave the field with it empty, then the secret combination will not be specified. This will speed up the launch of the computer.

A simple way is described how to reinstall Windows XP. With it, any user will cope with it. It is enough just to follow the instructions and recommendations from the article. On this procedure, you can read the completed, only the first launch and configuration of the computer remains.

First start

The first launch of Windows XP will be longer than the next. At this time, the computer will configure various parameters, as well as apply settings. If a password has been set, it will be required to enter.

First of all, you need to set the screen resolution. To do this, on the desktop, click PCM to an empty area and select "Properties". This paragraph changes in the section "Parameters".Then you need to update the drivers and configure the PC at your discretion.

Also need drivers of devices installed in the computer (chipset, sound card, video card, webcam, etc.)

Record Windows XP installation disk

To burn the Windows installation disk, we will need a disk image, a disk recording program from an image, writing CD drive and actually the CD Dwarf itself.

Windows XP SP3 Professional Disc Disk Rock

Any program is suitable for recording discs that supports an ISO image entry, such as Nero or Deepburner, which can be downloaded for free.

So, the disk image downloaded, installed the DeepBurner program. Now consider the disk recording process.

Insert the CD-R clean drive into the drive and run DeepBurner. After launching DeepBurner offers to select the type of project being created.

Choose ISO-image burn And click Next.

I do not know how you have, and my project window has opened in a compressed form. Therefore, it is necessary to stretch it grasping the mouse over the right lower corner or deploy to the entire screen so that it takes the look as in the figure below.

In the project window, press the button with three dots (Overview) and select the download file of the download ISO image of the Windows XP installation disk. In our case, this file Zvercdlego_9.2.3.iso..

Now you need to select the write speed and click the button. Burn ISO.. In order for the disk better to sign, the speed should be chosen a little less than the maximum. Now it remains to wait when the disk is recorded. After the installation of the Windows XP SP3 installation disk is completed, the drive tray will be promoted. Disc is ready!

Windows XP. (Internal version - Windows NT 5.1) - Operating System (OS) of the Microsoft Windows NT family. It was released on October 25, 2001 and is the development of Windows 2000 Professional. The name XP comes from the English. eXPERIENCE (experience).

In contrast to the previous windows systems 2000, which was supplied both in the server and in client versions, Windows XP is exclusively by the client system.

According to web analytics from September 2003 to July 2011, Windows XP was the most used operating system to access the Internet in the world. By February 2013, Windows XP was in second place after Windows 7 with a fraction of 19.1%. The maximum of this value was 76.1% and was reached in January 2007.

How to install Windows XP from a disk via BIOS

Now it's time to consider the process itself windows XP installations on a computer from disk.

First of all, you must configure the boot from the drive to the BIOS. To do this, go to the BIOS menu. How to do it may differ depending on the model of the motherboard. In most cases, you can hit this menu by clicking the button. Del. (on some motherboards models need to press the key F2.) After turning on the computer (during the starting screen saver on the screen). It is better to press this key several times for loyalty.

The BIOS menu differs depending on the manufacturer and version. There are two main types of BIOS: AMI and Award.

Below are the screenshots of Award BIOS. Need to go to the menu Advanced Bios. Features.

Here in the menu item First Boot Device. Press Enter and choose CD-ROM.

After that, press the ESC key to exit the previous menus where to select item Save and Exit Setup. Everything, now the first device for downloading the computer will be a DVD drive. Can go to the process windows XP installations from disk.

Now consider how to install the download from the disk in Ami Bios.

Select the tab Bootand go in it in the menu Boot Device Priority.

We put the first device for downloading (1st boot device) CD-ROM or DVD-ROM (model of your drive)

In some versions of the bios, the first device is selected after pressing the ENTER key and selecting the device on the desired item, in other devices, are moved up and down using the F5 and F6 or + keys and -

After that you need to go to the main menu by the ESC key and go to the tab. EXIT.. Select EXIT AND SAVE CHANGES To save changes and exit.

Now consider the process itself windows XP installations from disk to computer.

Insert the installation disk into the drive and restart the computer. The disk menu appears.

Select item Installation Microsoft Windows. XP SP3 B. manual mode And press ENTER.

It should be warned that installing Windows XP SP3 to Computer It takes about 40 minutes. So be patient.

On the first screen, press the Enter key to continue the installation.

At the next stage, read the license agreement and press the F8 key.

Now select the disc partition to install Windows XP. If the hard disk is new and not yet formatted, you need to create a section by pressing the C key.

Select the section and press ENTER. If section already existed, you need to confirm the setting in this section by pressing the key FROM.

At the next stage, the installation program proposes to format the disk. Select item Format section B. nTFS system (Fast) And press ENTER.

To confirm the formatting, press the key. F.

After formatting, the copy process will begin file required on hard disk.

After completing the copy files, the computer will be rebooted.

When booting a computer, it will start again from the boot CD. In the disk menu, select item

A window for selecting drivers for unpacking and installation will open. These are built-in drivers for many devices included in this assembly. If you install Windows XP from a Microsoft distribution, this will not appear.

Choose the necessary packages of the drivers, ticking and click OK. If you do not know exactly what drivers are neededAnd what no, select all. If you have drives with drivers for all devices (motherboard, video card, etc.), then remove all ticks to speed up the OS installation process. In this case, you will need to install the drivers manually from the disks after the installation is completed. Read more: how to install windows driver XP.

After pressing the OK button, unpacking the driver packages will begin, and when it is over, the installation of Windows will continue.

The following will appear the language selection window and regional standards. If the distribution of the Russian version of Windows XP is not needed to change here.

In the next window, enter the product key and click the button. Further.

A window will appear in which you want to enter the name of the computer and the administrator password. In this window, you can change anything. Then the administrator password will not be installed.

In the time settings and dates window, install right date and time as well as time zone.

In the network parameter window, select Normal parameters and Zhmem. Further.

In the Working Group window, write the name of the working group or a domain in which the computer participates. If you do not have a home or office network, you can leave everything without change and click Further.

After that, the installation of Windows will continue, after which the computer will automatically restart.

We go to the BIOS and put the first download from the hard disk, as described at the beginning of the article. We leave from bios with the preservation of changes.

Now before how to fully install Windows XP on a computer Last minutes remained.

When loading the system will automatically configure the screen resolution. Click OK.

In the window welcome windows XP click Further.

A window will appear with a proposal to select Windows Update Mode.

Choose Postpone this action For disconnection automatic update Systems and press the button Further.

The next window will prompted to configure Internet connection. Press Skip.

From the proposal to register refuse by selecting the item No, some other times and click Further.

In the final window, click Ready.

That's all! Now you know how to install Windows XP from the installation disk to your computer.

It remains to install drivers and programs, but it is already out of the scope of this article.