How to integrate SATA drivers in a VHD file. Useful programs. Creating a Windows XP Distribution and Adding Drivers to Windows XP Distribution

Integration of DriversSATA. In the Windows XP distribution, it does not work boot disk Created not working. Was, as you said on the site oszone.net, there are two instructions, one very complicated, the other easier, chose the second, did everything as it is written there, downloaded the MassTor driver package, the driver themselves are successfully integrated into the unpacked distribution, but then when collecting the assembly in ISO image of the CDimage program, further burns the free IMGBURN program, somewhere an error occurs and the disk in the end is not booting, spoiled five duals. Was still on one good resourceon laptops familiarized himself with the instructions, they use the NLITE program there, I do everything they say, at the end, click on the record and again the Dwarf is not booting, and what is interesting, they do not recommend using NLITE on ozone, and on this resource do not recommend CDimage, I do not recommend In desperate, I need a computer with the operating system urgently.

Integration of SATA Drivers in Distribution

Well, about despair you are in vain, you need to calm down and find an acceptable solution, let's try to find a mistake. I will say in advance, in everything we figured out, well, let's start the parsing of flights, we integrate the SATA driver in distribution Quickly and free. By the way, many can ask why?

Note: On enough new motherboards, with controller hard disks SATA II, and this also applies to stationary computers, as well as laptops, AHCI Winchester Work Technology has been applied. Undoubtedly, it is better than the previous IDE technology, but the fact is that it is designed much later than Windows XP was invented and therefore, to install this operating system, you need AHCI controller drivers that you need or snap during installation on a diskette, or integrate directly in Self windows Distribution XP, otherwise the installation process will end with an error.
On some motherboards, you can switch the hard drive mode with AHCI on the IDE, then Windows XP will be installed without any problems, but also the advantages of AHCI will have to forget, because during the operation of the operating system to switch to aHCI mode, it will not work either, it will end in a blue screen.

Flopopica we have no laptop and can not be, so we integrate DriversSATA. In the Windows XP distribution
The CDimage program did not use, I can not say anything, but Nlite enjoyed with great success, let's start from the very beginning.
First, we take a CD with Windows XP, it is very important to use the original by anyone not modified assemblies. Microsoft Windows. XP, this is the key to success.
Create at the root of the disk (C:) folder and call it (XPCD), all files from the Windows XP CD, copy to it.

If instead of a CD with the operating system you use ISO Image of Windows. XP, with it you need to do the same, unzipped to the XPCD folder, in the root of the disk (C :), you can have this 7-zip program.

Next, we go to oszone.net, we are very simply registering there, and download the MassTor with SATA drivers. If you have operating system 32-bit, which is in most cases, download the appropriate package MassTor_x86_11.8.22.rar, if 64-bit, then another massstor _x64_11.3.8.rar.

get out of the unzipped folder massstor.exe, run it, he asks us where the folder with windows files XP, want integrate in her SATA driver And we show him our folder in the root of the disk (C:), it is called with us (XPCD), did not forget yet?

Integration takes place ten seconds.

For normal operation, you will need a NET Framework 2.0 package. You can already be installed, first try installing and run NLITE.
Run NLite

Welcome

In the review, specify the location of our image-\u003e C: \\ xpcd and click further

Create boot image ISO and again further

Press Overview

Today I will tell about one of the many ways to integrate, implement, drivers in installation image Windows. In this way, you can integrate absolutely any drivers you need to almost any Windows image starting with 7 series and ending Windows 10.

We will need.

First of all, the image of the operating system in which we will integrate the driver. For a positive end result, the image should be taken original, that in which no changes contributed.

You can find out the original image or not telling.

We will also need the drivers that we will integrate into our image.

Well, the program itself with which we will do it. The program is called ntlite. You can download the program on the site to developer ntlite.com

Preparatory process.

Drivers prepared for integration must be in the unzipped form and lie in one folder.

The image in which these drivers integrate must be unpacked using the archiver, I use the 7Zip archiver.

NTLITE must be installed.

Our actions or the integration process itself.

Run ntLite program. In the window of the program that opens, on the left at the top, click the Add and specify the path to the folder with a unpacked way to Windows.

The folder is added to the source list and the program will show which versions of Windows are contained in your unpacked image.

You select the version of the operating system that you will modify and click on it with the left mouse button twice or once the right button and in the menu that opens, select Download.

The version you selected will be mounted by the program in a temporary folder for further work with the files of this image.

We'll have to wait a bit while the process of mounting, downloading. At the end of the left of the image there will be a green circle.

In the left half of the menu items will appear to edit and change the content of the image of the Windows image, selecting item Drivers, then add — folder with multiple drivers.

Specify the path to the folder with the prepared drivers and click open.

The program will deliver all the drivers that are in this folder queue to integrate them into the image.

Now choose the menu item apply.

In the window that opens, after clicking on the menu item apply put a tick on the point Save the image

Then give the image label and click OK.

Now press the button in the left upper corner Processing programs.

The program will process all the driver loaded by you, integrates them into the image and create the image itself.

The finished image will be saved where you indicated.

Manual How to install Windows XP with the integration of SATA drivers on a laptop or computer for beginners.

Introduction to installing Windows XP

As you have already had the opportunity to guess, this manual will be about the installation Windows XP.. I immediately want to note that oriented this material First of all, for beginners and those who have not come across this or to other reasons yet. Windows XP..

Communicating the forum with various people, I sometimes faced the prejudice that installing Windows XP is something complicated and incomprehensible, that only the true "guru" can put it. In fact, it is not. If you do everything right, then everything will turn out and will work. How to do everything right and told in this manual.

This site has already published such material :. There is installation Windows XP. It was produced in a somewhat simplified form. Simplification was that Bios. The laptop or computer was switched to switch the mode of operation of the controller SATA. on the IDE Mode. or the so-called compatibility mode. It was done because in the original Windows XP. No drivers for built-in controllers SATA. Production Intel (starting with southern bridges family ICH7-M.) and some models from AMD (starting with the family of southern bridges SB700.) that work in mode Ahci..

Note: The South Bridge is such a big chip on the laptop motherboard. It is connected to it hDD over the interface SATA.. In older laptops, a slightly different interface was applied - IDE. Many laptops allow switching to the microcircuit to mode in which Windows or any other operating system will assume that the hard disk is connected by IDEAlthough in fact it is connected via the interface SATA.. From here and grow roots at the term Compatibility Mode or IDE Mode..

A logical question may arise: and what is the difference between the usual regime ( Ahci.) and compatibility regimen ( IDE Mode.)? In essence, the difference is the technology NCQ.. In mode Ahci. It is enabled, in compatibility mode is disabled. In practice, this technology provides a faster work of the hard drive with several applications at the same time.

The difference is that in the AHCI mode there is a technology NCQ.which optimizes the trajectory of the movement of the head of the hard drive. In compatibility mode ( IDE Mode.) This technology is inactive. In practice, technology NCQ. Allows the Winchester a little faster to work simultaneously with several applications. With the results of comparison of these two modes, you can read this material: NCQ technology. Should I turn on AHCI? .

Important note: SATA driver need to integrate far from all laptops. This applies primarily by laptops on Intel chipsets, as well as laptops on chipsets from AMD 7 series and above. For other laptops, you do not need to integrate the driver. Also on need to switch to BIOS mode Winchester work. Original build Windows XP already contains all required drivers. That is, just put in BIOS Download From the disk and install the system.
If you have a chipset from AMD 7 series (bunch 780G. + SB700.), then better use. The fact is that on this moment observed small problems With the integration of SATA drivers.

For installation Windows XP. on the hard drive that works in mode Ahci., There are three main ways:

Record drivers on a floppy disk, insert it into a USB floppy disk drive when installing Windows XP. Press F6. and select the desired driver;
Integrate SATA drivers in the already installed mode IDE Mode. Windows XP, and then switch to BIOS on Ahci.. If you do not integrate the drivers, but simply switch the mode of operation, then get blue screen and reboot;
Integrate SATA drivers to Windows XP distribution.

Consider each of these ways:

First method The simplest, but for its implementation you need a floppy drive. Buy an external USB drive is not always possible. If the second and third will not work, then you can safely resort to this method, the benefit, floppy drives are very cheap;
Second way It is good if there is already a system with the configured programs, drivers that are too lazy to rearrange. How to integrate drivers in already installed system Described in this material: integration of SATA drivers in the already installed Windows XP;
Third way It is optimal in terms of simplicity, time and money costs. It is this method that will be described in this article.

Now you can go to directly to the installation description. Windows XP. With the integration of drivers SATA..

To install Windows XP with the integration of drivers, you need to do such actions:

Integrate SATA drivers to Windows XP distribution and write it to the disk;
Turn on the BIOS boot from the disk;
Install Windows XP;
Install drivers on a laptop.

Important note:if you do not have a CD / DVD drive, then you should install Windows XP from the flash drive or from the memory card. How to do this is described in these manuals: and.

1. Integrating SATA drivers to Windows XP distribution and recording

For integration, we will need:

Windows XP disk or Windows XP image in format .iso. It is recommended to use clean MSDN. assembly;
Set of utilities and drivers. You can download it according to the links: /. Download the file, run and unpack the folder convenient to you;
Clean CD or DVD.

Important note:if you do not know which windows version XP Install on your laptop (32-bit or 64 bits), I recommend that you familiarize yourself with this material :. Also worth familiar with this material :.

To integrate SATA drivers, you first need to copy the distribution Windows XP. In the folder on the hard drive. Create a folder called Windows XP. On disk D: \\, eg. Copy all files from the Windows XP disk to that folder. If there is no disc, but there is .iso image, then you can unpack it in the folder Windows XP. Using the utility 7-zip.. You can find it in the archive with the programs and utilities that you downloaded on the links above. Eventually windows folder XP must contain such files and folders:

Install and run nLITE, choose language and click Further:

Press Overview And specify the folder to which files from the disk copied:

On this page, we specify that we will do with the distribution. Choose Drivers and ISO boot image:

Now it is necessary to specify the folder with the drivers that will be integrated into the distribution. Press Import and choose Driver folder:

If you have an Intel processor, then select drivers for Intel. The archive has drivers for 32- and 64-bit systems. If you have a chipset from AMD 7 and above the series, then select the corresponding drivers from AMD:

When the folder was selected, select the driver:

And now, perhaps, the most interesting. Choose your model of the southern bridge. For new laptops on processors Intel Core This is usually Intel (R) PCH SATA AHCI Controller. If you do not know what kind of southern bridge you have, then choose everything:

Run the integration process:

Here are the drivers and integrated:

Now insert into the drive disk, choose in the window on the left above DIRECT BURN. And click on Record:

Agree:

That's all. Drivers disk with Windows XP and SATA drivers Ready:

2. Turn on the boot from the disk to the BIOS

To turn on the boot from the disk in Bios.First you need to go to it. To do this, at the beginning of the laptop download, you need to press a specific key. Usually, when loading at the bottom it is indicated which button to click to enter into Bios.. Most often that F2., Del., ESC other.

After entering the BIOS, you need to find where the order order is adjusted. Usually these settings are posted on the tab. Boot. To change the order order usually use buttons F5/F6.. Sometimes the selection of the boot order is performed through a special menu. Usually right on the page with the settings indicated by some buttons you can change the download list.

I exhibit your CD / DVD drive to first place, save the settings and exit from the BIOS. In order for the settings to take effect, you need to make a reboot. It usually happens automatically after saving the settings and exit BIOS /

3. Installing Windows XP

Installing Windows XP to which SATA drivers are built, no different from the usual windows installations Xp.

How to install Windows XP is described in this material :.

If during installation the installer will not find hard drives or just a laptop or computer will give you a blue screen, then it means that you integrate not those drivers SATA., Distribution Windows XP. curve or hard drive problem. In this case, try switching the hard drive mode to the BIOS IDE Mode. (Compatibility Mode).

When you finish with installing Windows XP, you can go to the next step: to drivers.

4. Search and installation of drivers

After installation Windows XP. You need to install the drivers. Why do they generally need?

To answer this question, you need to consider what the driver is. The driver serves as a binding link between the operating system and directly with a particular device. If this connecting link is not, then Windows Just can not work with that device. This device may be a sound chip, video card, a network card, a card reader, a webcam and many other components of your electronic assistant. Disorder. About how to make them work normally now and let's talk.

So. Where and how to search for drivers? For these purposes on the site there is a whole section. To make it easier for you to deal with its contents, a kind of guide was created :.

If you laptop owner ASUSthen you can find the entire set of drivers on one of the pages specific models. You can find a list of available models here :. Owners Acer., emachines. and Packard Bell. Also nothing to worry about. Drivers for most of the models are available here: Drivers for Acer, Emachines and Packard Bell laptops. Drivers and utilities for laptops Lenovo. Can be found in this section :.

If you do not ASUS, Lenovo., Acer., emachines. And even not Packard Bell., then do not despair. Drivers can always be found. In this, leadership will help you:, as well as numerous themes on our forum:

Common topic search for drivers: ;
Solving problems with drivers for video cards: ;
Solving problems and search for sound card drivers: ;
Drivers for network cards And Wi-Fi adapters should be sought using this topic: ;
With questions on Bluetooth addressed: ;
Web cameras are discussed here: ;
Different proprietary utilities for a laptop or computer can be found using the forum themes: , and.

You can also help the article :. There are answers to the most frequent questions.

The process of installing drivers and utilities is described in detail in this manual :. It is all shown on the example of laptops. ASUS. How it takes place on laptops Acer. Approximately shown here: Installing drivers on Windows XP. Generally installing drivers is quite standard for all laptops and computers. There is nothing special. Unfortunately, it is impossible to say about branded utilities. About them now let's talk.

5. Installation of branded utilities and applied programs

Branded utilities are usually responsible for work. additional keysFor the display of clicks on the display, the operation of various energy-saving modes, to work with the camera and wireless devices in the end. Sometimes curiosities even happen: it is impossible to install the driver on Bluetooth adapter. Due to the fact that it is disabled. It requires a special utility for its inclusion. Sometimes this happens with a laptop touchpad.

Consider installing utilities. On devices Acer., emachines. and Packard Bell. Installing utilities comes down to installation Launch Manager., on laptops HP. - HP. Quick Launch. Buttons, on laptops ASUS - Set Utilities ATK. etc. You can discuss branded utilities in this topic forum: and in other topics for branded utilities.

Now go to K. applied programs. They are in our Internet there are a great set for the most different taste, color and for the most different tasks. To simplify you the task of the selection, a selection has been created with the most necessary programs :. Maybe there is something useful and find. Do not also forget about. Also a fairly useful guide. Windows XP from under Windows Vista. or Windows 7. Using the program Oracle VirtualBox.. In this the case of Windows XP is installed on virtual Machine and runs as a separate application in Windows Vista, Windows 7 or in any other operating system, including various distributions Linux. Thus, you can solve problems with the compatibility of various programs and drivers with Windows Vista, Windows 7 or with another operating system.

Optimization and acceleration of the computer.
Installing Windows

Windows XP installation features from flash drive

During the installation process, it will be proposed to choose the language - Russian. Then everything passes without features and after completing the installation, run the program nLITE - Fig.1:

Fig.1.Main window program nLITE

If the distribution is (i.e. setup files) Windows XP. It is on the CD, then it is necessary to download it to the hard drive, for example, in the folder C: \\. This address must be specified after clicking the button. Further In Fig.1. To view information about your OS, you can click Overview - Fig.2:

Fig.2.Information about Windows XP

Fig.3.

Fig.4.Integration of SATA Drivers in Windows XP

Choose the necessary drivers For your computer. For netbooks based on Atom processors, this is usually ICH7-M. For laptops on intel Platform Culv is ICH9-M. If you do not know what to choose, then allocate everything - Fig.5:

Fig.5.Select SATA Drivers for Windows XP

Fig.6.Running SATA driver integration for Windows XP

If everything is done correctly, after the end of the SATA driver integration process, a message will be issued in Windows XP. Setup completed! To exit the program nLITE click Ready.

05/13/2012

More articles on "Optimization and Acceleration of Computer":

Integration of DriversSATA. The Windows XP distribution does not work, the boot disk is not created working. Was, as you said on the site oszone.net, there are two instructions, one very complicated, the other easier, chose the second, did everything as it is written there, downloaded the MassTor driver package, the driver themselves are successfully integrated into the unpacked distribution, but then when collecting the assembly in ISO image of the CDimage program, further burns the free IMGBURN program, somewhere an error occurs and the disk in the end is not booting, spoiled five duals. Was still on one good resource dedicated to laptops, got acquainted with the instructions, they use the NLITE program, I do everything as they say, at the end, click on the record and again the Dwarf is not booting, but what is interesting, it is not advised to use NLITE on ozone, and on this The resource is not recommended by CDimage, I'm confused in despair, I need a computer with the operating system urgently.

Integration of SATA Drivers in Distribution

Note: On sufficiently new motherboards, with the SATA II hard drive controller, and this also applies to stationary computers, as well as laptops, AHCI Winchester Work Technology has been applied. Undoubtedly, it is better than the previous IDE technology, but the fact is that it is designed much later than Windows XP was invented and therefore, to install this operating system, you need AHCI controller drivers that you need or snap during installation on a diskette, or integrate directly in The Windows XP distribution itself, otherwise the installation process will end with an error.
On some motherboards, you can switch the hard drive mode with AHCI on the IDE, then Windows XP will be installed without problems, but also about the advantages of AHCI will have to forget, because during the operation of the operating system, switch to AHCI mode will not work either, it will end in a blue screen.

Flopopica we have no laptop and can not be, so we integrate DriversSATA. In the Windows XP distribution
The CDimage program did not use, I can not say anything, but Nlite enjoyed with great success, let's start from the very beginning.
First, we take a Windows XP CD, it is very important to use the original not by anyone who is not modified Microsoft Windows XP builds is the key to success.
Create at the root of the disk (C:) folder and call it (XPCD), all files from the Windows XP CD, copy to it.

If instead of a CD with the operating system you use ISO Image Windows XP, you need to do it in the same way, unzipped to the XPCD folder, at the root of the disk (C :), you can have this 7-zip program.

Next, we go to oszone.net, we are very simply registering there, and download the MassTor with SATA drivers. If you have a 32-bit operating system, which is in most cases, you download the appropriate package MassTor_x86_11.8.22.rar, if 64-bit, then another massstor _x64_11.3.8.rar.

get out of the unzipped folder massstor.exe, run it, it asks us, where the folder with Windows XP files, I want integrate in her SATA driver And we show him our folder in the root of the disk (C:), it is called with us (XPCD), did not forget yet?

Integration takes place ten seconds.

For normal operation, you will need a NET Framework 2.0 package. You can already be installed, first try installing and run NLITE.
Run NLite

Welcome

In the review, specify the location of our image-\u003e C: \\ xpcd and click further

Create ISO boot image and again further

Press Overview