Custom firmware huawei mediapad 10 link 3g. What do Huawei Tablet device drivers do

In front of you detailed step-by-step instructions on how to flash a Huawei MediaPad 10 Link tablet. Our editors have chosen the most suitable method for flashing this Huawei model. If this instruction does not give any result try flashing another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.

A warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installing the system using CWM Recovery 1. Charge the flashing tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, sim card and tablet memory. Simka (if any) can be pulled out. 3. We put the necessary firmware into the tablet's memory. The firmware file must be in archive format zip... You can select and download the firmware. 4. On all Huawei tablets, there is a Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do it according to the following instructions: Install the app from Google Play on your tablet. Launch it and grant Root rights. ...

Select "CWM Recovery" from the list of options.

Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons).

You will be prompted to download. Click "Yes".

Then the download of the CWM Recovery image for the tablet will begin.

A notification will appear that the firmware was successful and now you have a modified recovery installed. We immediately go into it, for this click "Yes".

Ready. If you already have ClockworkMod Recovery installed, then just enter it by holding any of the combinations for 3-5 seconds: - Volume up + power button - Volume down + power button - Volume up / down + power button + "Home" - Volume up + volume down + power button 5. Movement in the Recovery menu is carried out using the volume buttons, and the selection is confirmed with the power button. Before installing the firmware, you must first do a factory reset. Therefore, in the menu, select the item wipe data / factory reset.

6. Then just confirm that you agree to reset: Yes - Wipe all user data.

7. Now in the main menu of Recovery select install zip.

8. Then select Choose zip from / sdcard.

9. Navigate to the folder where you saved the firmware zip file and select it.

10. You will be prompted to confirm the action. Please select Yes - Install ....

11. The process of installing the firmware will begin and at the end an inscription will appear Install from sdcard complete. The firmware is complete. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.

12. Ready. The tablet will start loading with the already installed firmware. Other materials

Manual download and update procedure:

This built-in Huawei MediaPad 10 Link driver must be included with the Windows® operating system or available for download via Windows® Update. The built-in driver supports the basic functions of your Huawei MediaPad 10 Link hardware.

To perform automatic download and update:

Recommendation: We highly recommend using DriverDoc, a driver update tool for Windows users who are inexperienced in updating Huawei Tablet device drivers. DriverDoc is a utility that automatically downloads and updates MediaPad 10 Link drivers to ensure that the correct driver is installed for your operating system.

With a database of over 2,150,000 drivers, DriverDoc will keep not only your Tablet drivers updated, but the rest of your PC's drivers as well.

Install Optional Products - DriverDoc (Solvusoft) | | | |

Huawei Frequently Asked Questions regarding the update

What do Huawei Tablet device drivers do?

These tiny programs called "device drivers" allow your device's MediaPad 10 Link to communicate correctly with your operating system.

What operating systems are compatible with MediaPad 10 Link drivers?

The lastest MediaPad 10 Link drivers are supported on Windows.

How do i update MediaPad 10 Link drivers?

Device drivers for MediaPad 10 Link can be updated manually using the Windows Device Manager, or automatically with a driver scan and update tool.

What are the benefits and risks of updating MediaPad 10 Link drivers?

Main benefits of updated MediaPad 10 Link drivers are correct functionality, increased functionality, and better hardware performance. The primary risks from installing the wrong Tablet drivers include system instability, hardware incompatibilities, and system crashes.

About the author: Jay Geater is President and CEO of Solvusoft Corporation, a global software company focused on innovative services. He has been passionate about computers all his life and loves everything related to computers, software and new technologies.

Sooner or later, there comes a time when the Huawei MediaPad 10 FHD starts to work poorly, slow down and give out frequent errors. In this case, the Huawei MediaPad 10 FHD firmware should help solve these problems.

However, with simple freezes, the system should not be reflashed immediately, first you need to make sure that the problem cannot be solved in another way. If there are no options, then you can install a new operating system. You can do this yourself, without the services of specialists, if you follow the instructions below exactly.

You can download the Android update to your tablet from various sites dedicated to mobile devices. There can be both official versions of the software and amateur assemblies, so you need to correctly select the version that suits your device.

The best option is to download the firmware from the manufacturer's official website, since there are always up-to-date versions that will definitely work without problems on your device. Most importantly, they are safe and will not contain malware.

You can download the firmware for Android 4.1 for different versions of the Huawei Mediapad 10 FHD tablet at the link below:

Download firmware for S10-101u (Wi-Fi + 3G)
Download firmware for S10-101w (Wi-Fi)
Download firmware for S10-101l (Wi-Fi + LTE)

It is important to know before flashing!

Before flashing your device, you need to know a few important things:

Be sure to make sure that the charge is at least 80 percent. Ideally, of course, 100%! If the device goes out due to a low charge before the installation process is completed, there is hardly anything that will help your device.
During the firmware process, everything is deleted from the gadget's memory. Therefore, if there is important data, then you need to make a backup copy to a memory card.
The downloaded archive with the firmware must be unpacked onto a USB flash drive, and not into internal memory.
For installation, the memory card must be FAT32 file system.
The firmware must be unpacked into the folder " dload", Which you want to create on the USB stick. It is there that the flasher program will look for the installation file.

Firmware

The firmware can be done in more than one way, we will consider the most effective below, it will allow you to update Android as simply and quickly as possible.

Preparing for firmware

First, you need to determine exactly what firmware is needed. The fact is that in rare cases it can kill the device and then the help of the wizard will be required.

Before starting the firmware, you need to charge the tablet, as mentioned above, and have a computer and a USB cable, a USB flash drive with the FAT32 file system.

Since the memory is cleared, you need to transfer all important data to another place or make a backup copy to a memory card or computer. After that, you need to reset the settings in order to roll back the system to the factory settings. Next, you need to insert the memory card into the tablet, and then connect it to the computer using a USB cable.

We open the memory card on the computer and save the archive with the firmware there, it should be the folder “ dload"(Inside which files update.app and unlmt.cfg).

The preparation for installing the new system is over, after these steps you can start to actually flash the tablet.

After everything has been done according to the instructions, the device must be disconnected from the computer and turned off, and then turned on again. The installation should be done automatically.

After turning on the device, a green robot appears on the screen - the symbol of the Android operating system, and below it is the firmware installation scale. After finishing the installation, the tablet should start in normal mode.

However, there are options when, after the preparation done, the installation does not start automatically. For this to happen, you need to take several steps. Two available ways to solve this problem will be discussed below.

If the firmware does not start: method 1

The firmware process has not started, but you should not immediately panic: there are two simple ways to solve this problem (the firmware files should already be on the USB flash drive in the folder dload). First: you need to start the tablet and go to " Calculator". There you need to type the combination () () 2846579 () () =. After that, the hidden service menu will start. We open " Project Menu Act ", in the next window, click " Upgrade "... Then we choose “ SD card upgrade " and finally - " SD card upgrade External Storage ".

If, after these steps, the tablet automatically starts rebooting, then this is not an error, on the contrary - everything was done correctly. Next, a green robot should appear again in full screen and a scale on which you can see the progress of the installation of the system.

However, it may happen that this method did not help either. You should not despair, as there is another option. It's a little more complicated than the one described above, but still ...

If the firmware does not start: method 2

You need to get the USB flash drive out of the tablet and connect the included tablet to the computer using the same cable. The main difference from the standard installation is that the unpacked firmware file must be dropped into the internal memory in the folder dload... This is what we do.

Next, we disconnect the device from the computer, go to " Calculator"And enter () () 2846579 () () =. Hidden settings will open. There we select the section " Project Menu Act". When it opens, click " Upgrade". In the new window you need to select " SD card upgrade "... Then the last menu we need will open, in it we press “ SD card upgrade Internal Storage "... After these simple actions, the tablet will go into a forced reboot, then the robot will appear again and the software installation will begin. If this did not happen, then a mistake was made somewhere and you need to try again.

When the tablet boots up, you should not touch it for a while, since updates for the touchscreen and modem will be on it, after which the device will go to reboot again. This completes the installation.

Hello, this article contains information about the mobile device. Here you can download the latest Android firmware on Huawei MediaPad 10 Link and you can also find out how to get root rights.

You can learn more about root rights. Instructions for obtaining are below.

When do I need to update the firmware

I would like to install a new firmware to expand the capabilities of the smartphone;
Recovery after unsuccessful firmware needed
The device constantly reboots for no reason;
The device does not turn on.

What firmware do we have

To download the firmware Android 5.1 Lollipop, 6.0 Marshmallow, 7.0 Nougat, Android 8.0 O on Huawei MediaPad 10 Link read the full article - this is important. Once you have installed the latest version of Android available, you will be amazed at the possibilities. And also you can find the official version of MIUI firmware of different versions and custom original firmware.

If you have any questions, you can contact us through the comments form.

Availability of firmware: available.

Download Firmware

Leaving a comment through the comment system, please indicate a real email if you have problems installing the firmware. Please take into account that the site administration may not respond immediately, depending on the flow of applicants. In addition to the administration, ordinary users can answer and help you, just like on the forum.

The manual on how to install the firmware is on the links below. Firmware download for Huawei MediaPad 10 Link is available via torrent with instructions.

Firmware installation instructions

To download, select the firmware you need and click on the link.

To install, do the following:

Download the file with firmware and special program
Run the program on the computer
Select the required firmware version
Follow the instructions from the file archive

Huawei MediaPad 10 Link Firmware Video

How to flash H M 10 L S. Before the firmware H M 10 201 H MP 10 L Official firmware OS 4. and was recommended by the brother in function. 19 and click Update Firmware on H M 10 FDL 201U. I immediately draw your attention to the point that during the firmware H M 10 201 all other applications on the computer must be closed. Tablet H MP 10 L 3G is another creation of the world famous company H. The firmware number consists of several blocks, the description is based on the example of firmware S V100R001C233B001. H MP firmware Duration 116. Replacing the firmware of the H M 10 L 3G S tablet with a non-original one does not guarantee the operability of all functions. Firmware H M 10 201 Official instructions. Dear guest, on this page you have access to material on the topic H M 10 L 201 firmware

After that, release only Turn on, while holding the Volume Up until the start of the firmware. Can I make and receive calls from mobile operators to 10 201? There is a tablet 10 201. I have one, you can not call, although there are firmware where the dialer is unlocked, but the firmware itself is 10 201 firmware H MP. Next, download the archive with the new firmware for H M 10 201, install the necessary drivers, as well as the program SP F T. MP 10 L 201, version. How to reflash H M P 10 L. Open the U D application. For any actions that you perform with your device, you are solely responsible. Today I got a tablet HUAWEI MP 10 L 201U for repair. Android does not load. Archive with firmware for H M 10 201 T 1043 This article will discuss the process of uploading the official firmware version to. The specifications provide for SDHC types with a maximum capacity of 32G and SDXC, How to change the firmware to H M 10 201

Before starting the process of flashing the S 900, you. Detailed instructions for flashing the H MP 10 L tablet, step-by-step installation steps. Firmware for tablet 10 201 updated archive uploaded. H MP 10 L Official firmware OS 4. Detailed instructions for firmware H M 10 L 201U. Firmware H M 10 201 is a very important task that must be performed by a specially trained person. If you need firmware H MP 10 L write your full number in this thread. Within the framework of this topic, firmware for various modifications of SU, SU, SWA of the tablet H M 10 L. H 10 201 firmware is laid out and discussed. Brought in for repair 10 201, with a malfunction does not charge. M L firmware and programs, service manuals, diagrams, etc.

Theme H MP 10 L 201. In this review we take a look at the 10 best custom firmwares for H MP. H M 10 201, you should install the drivers for this device, because without Download the driver, firmware for H M 10. Theme H MP 10 L SU touchscreen. We install a pack of drivers, software for uploading new firmware, as well as. H M 10 L 201, because he suited us at a price of rubles. H MP 10 L 8G 3G reviews and comments. Download the archive with the new firmware for H M 10 201 and unpack it onto a flash card. Firmware for tablet H MP 10 L. HUAWEI M 10 L 3G S download firmware. Burned-out legs at the power loop connector on the subboard

H R H M 10 FHDL allows you to remove, remove and reset the password, pattern or pattern, return the tablet to the factory settings, and reset the settings. Here you can download for free the firmware for the H MP 10 L tablet, running on A 4. H MP 10 S, S, S Official firmware OS 4 Instructions for the HM 10 201 firmware. Download drivers, firmware for HM 10 201 and the program for its installation v. Firmware H M 10 L 201. Before Firmware number consists of several blocks, description is based on the example of firmware S V100R001C233B001. Taken from the firmware Today we have prepared a small instruction and a couple of firmwares for the HM10LS. Firmware for H MP 10 L 3G model. Firmware H M 10 201 Forum about firmware