Clave screen. The PRINT SCREEN button does not work on the keyboard. Online services to create screenshots

Does your computer work slowly? Computers tend to slow down when they become older. Most likely, this is not related to its hardware, and Windows is to blame and its architecture. Want to know why the computer slows down? Read the article further and eliminate PC hangs! Many inexperienced users immediately advise defragmentation hard disk.

It is worth recognizing that this method Sometimes it helps, but this not only takes time, but can also damage your data if the computer suddenly turns off. Moreover, even if defragmenting and helps, but it helps us usually old computers, then only for a while. We want to consider other problems, and help you find the reason when the computer works very slowly. We present popular reasons why the computer slows down.

Only yesterday you could safely listen to music on your PC, watch videos, in whatever quality it is, and use other opportunities offered by new technologies - and today are forced to understand why the computer slows down, what to do in Windows 10, Windows 7 or other generation of this OS? Do not worry: whatever a problem is, our article will allow it to solve it as quickly as possible and without any extra spending of nerves.

Unfortunately, this situation can happen with each: you are not protected from it, even if you use the most modern computing device. Immediately alleged: small braces, occasionally from time to time, are quite natural and do not depend on the urgent need to change the PC. On the other hand, if the problem began to repeat regularly, it's time to think at least the fulfillment of full-format check. We also advise, maybe he will make it clear that with the system is not so.

The task greatly complicates a huge variety possible causes "Breakdowns" - from systematic failures to one-time failure, eliminated during the first reboot. Of course, to consider all possible circumstances that can lead to unpleasant consequences, it is impossible in one article: we will list the most common options and tell you what to do in each case.

Before proceeding with work, we note: all the recommendations below are completely safe for your PC or Lapplet. You can safely apply them - of course, provided that you carefully read the instructions below explaining, for what reason the computer slows down. What to do, read below. We recommend to act in this order - then you can eliminate the problem with minimal energy costs.

First of all we advise you to pay attention to the possible hardware problem. Very often, the first symptoms of the bracket appear when pc overheat. The mechanism is simple: the temperature inside the system unit rises, and, focusing on the signals sent by the sensor, the system decides to reduce the speed of the calculation processor. The latter is quite logical expressed in the slowing down background and active operations. Therefore, it will be logical.

Eliminate such a lack without using comprehensive methods, will not work. Before proceeding with decisive action, look at the temperature of the computer; make it you can with one of special applications, in particular, AIDA64.

After downloaded and installed the application, go to subparagraph "Sensors"- You can find it in the tab "A computer".

As you can see, on the example above, all values \u200b\u200bare normal - therefore, no action in this direction will not be taken. If the temperature of any component exceeds 75-105 ° C, you will definitely have to think about what to do if the computer slows down in Windows 7 or Windows 10.

At first, you can do the most trivial measures:, as well as check the state of the built-in coolers. As a temporary measure, you can use the external cooling system - but for a long time It is impossible to do it.

In addition, the specified way you can not eliminate the overheating of individual components, including the video adapter. In this case, it will have to act more systematically - and this repair will cost more.

Sould you be clean, dust in your apartment will certainly find - and, that is still sad, some of them will necessarily be asced inside the system unit. Over time, dust accumulates more and more; It forms a dense, non-heating layer. As a result, the processor, the graphics adapter and other components lose the ability to cool naturally, due to the movement of air masses.

As a result, the temperature is exceeded, leading if not to burnout items, then to the system initiated by a slowdown of manufactured computing operations. To check the correctness of the assumption and finally understand for what reason the computer works slowly, it often slows down and hangs, first use one of the applications to check the temperature - for example, Speccy. or already mentioned Aida64.. Remember that the value shown by the application may differ slightly from the real - in particular, due to losses when the signal is transmitted from the physical sensor into the system.

Next, to proceed to correcting the problem, open system unit And if possible, neatly, trying not to harm the components, remove the accumulated dust. Pay special attention to the cooler: it often happens that the blades simply cannot spin due to the axial particles.

To blew dust, use not too powerful vacuum cleaner. It is better to work on the reverse - then you minimize the risk of losing randomly disconnected details.

In some cases, especially if you have a hot or case in your apartment, it's best to leave the system unit open, and from the outside to put a desktop fan outside.

Tip # 3: Clean the system disk with Windows from garbage

The next step is already software, rather than hardware. One of the most common possible causes of malfunction - accumulated over a long time and became unnecessary files. In this section, we will tell you how to clean your computer so as not to brake using the built-in funds offered by the system.

The data from which you have to get rid of are damaged files, cache, records contained in the OS registry, and other information. The more you spend time behind the monitor, the greater the volume of unnecessary information - and to return the machine to the working state, first you will need to delete all these records.

Despite the fact that the relationship between the volume and productivity is not obvious, it is. In particular, due to the overcrowalty of the program, the program you are currently cannot record new data on the carrier. The smaller the free space remains, the higher the probability of refusal caused by software causes - and vice versa. If on system disk Catastrophically lacks the place, it can cause the brakes of the computer. In this case, we advise at the expense of another logical disk.

To proceed to the process, open the list "My computer". After that, right-click the header of the disk you are going to clean. Moving further: Choose in the list that opens available features last item "Properties".

Click, being in a new window, by a button that allows you to start cleaning the media.

Take patience: the preparation process will take a few minutes, in particularly launched cases - to an hour and a half. Do not close the window - otherwise everything will have to start again.

To get rid of the problem, as a result, the computer slows down, it hangs, it works slowly, select in the next window, from which categories of unnecessary data you would like to get rid of, Slip the checkboxes in the corresponding fields, then click "OK".

You can proceed to the beginning of the operation you can click on "Delete Files".

Like the preparation, this process may take quite a long time. Upon completion, open your system disk and find the directory Windows. Here you will need to find a catalog called Temp.. All that is here can be deleted without any consequences for the computer. Just mark all the folders and click the appropriate button - then confirm the action. If part of the data is not deleted, do not worry: they will be automatically cleaned after the first restart.

Do not stop at this step. To go to the next, use the combination of buttons Windows and without releasing the first R.. Now enter the query in the new window % Temp% And apply it.

Among other things, in addition to the listed manipulations can, through "Control Panels", get rid of those who have become unnecessary programs. Will help you in this link having an appropriate name and located in the section "Programs".

Next, to solve the problem, because of which you have to think, why the computer slows down in Windows 7 or "dozen", alternately choose the relevance of the application and remove them using the item item in the menu.

In addition, you can resolve the issue by moving a part of the data from three directories, most often provided by the "tinted". All of them are located on the system disk, in the subdirectories Users.. You will need to be viewed and, as necessary, clean:

• "Desktop" (Desktop.);
• "Documentation" (Documents);
• "Downloads" (Downloads.).

After deletion, do not forget to make the final step: Clear "Basket". Otherwise, part of the files will remain on the disk - which means that your PC will work not so effectively as I would like.

Computer can brake if your hDD Too filled with data. W. local diskwhere the operating system is installed, there must be at least 300 MB-500MB of free space to ensure normal operation of the paging file. Please note that this is mainly related to C: disk or any other logical disk used under the cache of the system.

If your drive C: too full, delete unused programs to free the place. It will be useful to clean the Internet cache files in the browser, as well as another unnecessary garbage From a hard disk. Note that the strong brakes of the computer with a completed system disk can hardly occur. However, you can try to increase the paging file so that the system can easily store your data in the cache. In Windows 7, this is done as follows:

Start → Control Panel → System → Advanced → Speed \u200b\u200b→ Open tab Advanced → "Change" button in Virtual Memory

This approach can not only speed up your computer, but also lead to system hangs, so it is necessary to increase the paging file carefully. For weak PCs and laptops with RAM, a total of 2 gigabytes or less, it is better to make the size of the paging file 1-1.5 GB.

Council # 4: Clean the Windows registry from old data

Unfortunately, in the way that we told in detail above, you will not be able to save one of the most important tools of the system from unnecessary entries. Information in it is not saved in the form of individual files, but in text record format. Some of them should be automatically removed upon the occurrence of certain conditions, the other remains forever - and without your participation is not going anywhere.

You can perform the following task manually, but the process will take extremely long time and take a lot of strength. You will help a program that allows you to clean the computer so as not to brake; In particular, this CCleaner. You can use it absolutely free.

To start directly to the step described, find the panel in the main window "Registry". Here, noting the checkboxes all available items, search for problems by clicking on the same button.

The process will take relatively little time. Upon completion, check the checkboxes in the next window items and click "Fix". If you are not sure in one of the records, simply uncheck the checkbox: it will not be worse.

If you wish, you can run the described process not one, but several times; Between them we advise you to perform the restart of the OS.

Tip # 5: Make optimization and defragmentation of hard drives

After unnecessary data is safely struggling, definition of the next process, which allows you to compose scratched files. As a result, the OS will be able to reduce the access time to each of them - and, therefore, work significantly faster.

To start acting, right-click on the header of the disk in need of the service described by us.

After that, select in the list possible options paragraph "Properties". As you can see, the order of actions is not distinguished by complexity.

Next step that you know what to do to keep the computer does not slow down, select the sampling "Service". You will need to click on the button. "Optimize".

To start manipulations, select the service in need of maintenance, and launch the analysis of information contained on it.

After a few minutes - you will need to gain patience - you will see to what extent the disk needs optimization. Next, to go to the final stage, click "Optimize". Can do it immediately, without prior analysis; The result will be approximately the same.

You can apply the function described at any convenient time; Especially advise this if fragmentation exceeds 10-15%.

Tip # 6: Make sure all the drivers for the computer are installed

It is possible that the cause of the troubles you have experienced damaged or remote drivers. These system utilities are of fundamental importance for stable work OS - Consequently, if you find errors in their operation, it will be necessary to immediately reinstall them, if possible replacing outdated versions on the newest. To testify to the presence of problems, because of which the computer thinks for a long time and slows down, there will be, in particular, the icons of red or yellow color near the pictograms of drivers.

You can start checking you can openly opening placed in "Control Panels" link. It will be called "Device Manager"; In order to get access to it, we advise switching to small or large icons.

And even if you do not find any faults, we advise you to update the drivers. Among other things, you can see how well the system is working with the basic set of service utilities. This will require. Achieve the goal is simple: during the next PC inclusion one or several times click on F8.After that, select the desired function in the window that appears on the monitor.

If in such an OS mode works normally, do not stop halfway: Look at what kind of drivers causes problems, and remove it - or change to a newer one.

Tip # 7: Add RAM into the computer or increase the paging file

It is possible that your computer may have so many running programs running in the background that it simply lacks RAM to start the main applications. All icons in the computer system tray are background programs that consume. To see and remove unnecessary running programs, you need to do the following:

1. Press the Ctrl + Alt + Delete keys simultaneously and select "Task Manager"
2. Sort the processes by memory consumed. Select a program or a task that consumes too much memory, with the exception of the conductor or system applications.
3. Then click the Finish Process button.

If you wish, you can repeat these steps removing all unnecessary programsexcept those necessary windows components. It is worth noting that the computers are currently powerful enough, and this problem is usually manifested in old PCs or laptops.

Nevertheless, there are computer viruses that clog the RAM, which causes freezing and slow operation of the computer. Therefore, we still advise you to look into the task manager and make sure that the computer slows down for this reason.

So, suppose you cleaned the system from unwanted programs. However, you only deleted programs from the memory of the computer, all of them will return the next time, launch Windows. If you do not want certain programs to load when starting the system, find this program And either configure it so that it does not load when startup, or simply delete it completely if you don't need it.

In addition, there are many free utilities such as PC Cleaner, which will allow you to determine which programs will be able to start when starting.

Quite a logical answer to the question, for what reason you notice all sorts of braces, is a banal lack. If there are financial and technical capabilities, we just advise you to just buy new RAM dies and - or, subject to compatibility, supplementable.

The second option is not so effective, but economical and allowing to eliminate the shortcomings, due to which the computer began to slow down, is to work with the paging file.

To start acting, go to "Properties"- This time the link you need will refer to the label "A computer".

Go by clicking on the corresponding button, to the options options "Speed".

Selecting the Sampling "Additionally", change the size of the data allocated to the "Expansion" of RAM.

If you think that the memory allocated by default is enough, you can skip this step and immediately go to the next one. Otherwise, specify the new size that you seem optimal, after which do not forget to confirm the changes made.

If the file on your PC has not yet been created, we advise you to do it right now: you will sacrifice several gigabytes of free space, but you can slightly increase productivity.

Tip # 8: Remove unnecessary programs from autoload

It does not hurt to remove all slower calculations Factors, disable automatic start A number of applications. Using the methodology described below, you will not be able to stop loading critical processes - and therefore it will be possible to safely get rid of the shortcomings, as a result of which the computer slows down.

The first way implies the use of the team. You can run it, applying an already familiar combination of buttons: Windows and R..

The tab you need, located in the new window appeared on the screen, is called :. Carefully examine the items presented here, after which you remove the checkboxes from checkboxes located near those records that you consider not applicable. As usual, do not forget to confirm the adjustments made by you.

If you use new generations of the operating system, you can find a tab with exactly the same name in "Task Manager". To remove unnecessary processes, launched without your knowledge, simply select the option for each of them. "Disable".

Among other things, you can try to disable interfering operational work OS services. You will find a tab with this title in the window called the same command :. To begin with, set the checkbox below the display of critical services, then prohibit exactly how it was described above: we can successively disable unnecessary records. In conclusion, do not forget to confirm the changes made, otherwise you will have to repeat everything again.

It is extremely likely that you will have to think how to clean the computer so as not to brake if the machine is infected with malicious codes. Simple programswhich we talked about in previous sections, in this case will not help: a full antivirus will be required for work.

You can use any of the fabricated products - all of them are currently working with approximately the same efficiency. Along the way, we advise you to make sure that advertising modules are not installed on the PC - and, if it is not so, to immediately delete them.

These are three separate programsthat must be launched at any time. Modern anti-virus solutions offer a complete list of protection and already include all these components. It is very important that antivirus program Constantly updated ourselves, otherwise her base will be outdated and the antivirus will be useless.

Tip # 10: Remove unnecessary extensions in the browser

No matter how surprisingly, these superstructures, which, when downloading, take away the minimum of traffic can be the cause of "inhibition" of your computer. It's not just that, as a result of their work, unnecessary data accumulates on the disk; Each additional process slows down the system as a result and leads to overload.

You can eliminate the first problem, just removing the add-in. If the plugin is needed in the near future, but so far without it you can do, we advise you to turn it off. Make it possible, on the example Google Chrome.by contacting the list additional tools and removing for each of the products listed in the subsection "Extensions", flag "Included". For complete removal Just click on the pictograph of the basket.

Tip # 11: Check the computer load in the device manager

Another version of the development of events is possible. If after all listed options bashes PC, Launch "Task Manager"using the combination of buttons Ctrl, Alt., Delete..

Now that a new window will be displayed on the monitor, carefully examine the list of processes started at present. For those who consider not binding, use the option "Remove the task". If you wish, you can set direct sorting on the load on the CPU - and consistently "close" the most demanding resources.

If you notice that day after day, the same program creates the same problem, we advise you to remove it and establish any analogue: on the Internet different versions For all possible needs more than enough. Some processes that do not want to stop as a result of the stopping of the main application will have to close manually - to this, too, you need to be prepared.

In addition, we do not advise too much to rely on the theoretical capabilities of your computer. Maybe the requirements of a particular game or program specified by the developers formally satisfy the parameters of the machine. In fact, it means that you can run the application - but not fully use it.

To prevent such troubles, always focus on the optimal, and not on minimum requirements, Special attention paid to the graphic adapter: It is on it that it lies the main load when you play video games or use complex design or design programs.

Tip # 12: Adjust the maximum speed of Windows

No option from the proposed above presented a positive result? Maybe the fact is that after windows updates 10 slows down the computer - read this version.

In addition, we advise to at least temporarily speed up the car, turn on the largest possible performance mode, sacrifting with graphic design. You can completely deactivate the "extra" options you can with the help of specific twigher applications, but to begin with, we advise you to use the system tool.

To start manipulations, again find yourself in "Control Panels" And go to K. "System Properties". It will help, as usual, the display in the form of icons.

Now go to K. "Parameters" Options responsible for the speed of the OS.

Here, select the design option, which allows you to activate the best speed. Like all other things, this change is made manually, will also need to confirm.

Brake games on the computer

Why brake games on your computer? Today computers have become powerful enough, and yet for many brake gamers in games are a problem. In this situation, you can advise to conduct an audit of your personal computer And reveal his weak side. It may be a shortage of all the same RAM, weak or outdated video card.

Ideally, the system must be balanced and each component is suitable for modern games. Here are our simple recommendations if the computer began to work slowly:

• Modern processor S. large quantity Cash memory. Here the main thing is not to buy a trimmed version, which may not be enough for a game computer.
• 4 gigabytes of RAM is enough for almost any game to hold the evening with comfort
• Video cards today come out almost every week. It is not necessary to scare it, as well as overpay for top new items. The main thing is to find a golden middle, which is nonethelessly new on the supply market.

We summarize. To the games do not slow down, you need to find a weak point in your computer if it is not very outdated, that is, to spend it, or.

The computer works slowly after installing a new device.

Sometimes it happens. You bought a new LTE modem or touch keyboard, and then it started ... How to find out why the computer slows down after installing a new gadget? It can happen, both due to the driver incorrectly written by the developer and due to the conflict of drivers. If the driver is "curve", and the computer slows down, then only the search for an alternative version of the driver can help here.

If the driver conflict has occurred in the system or the driver is simply not established normally, then this can be solved as follows. To prevent hanging and slow computer work, load in safe mode Windows. It is done during the download of the computer, it is necessary to press and hold the F8 key immediately after checking the PC memory. Being in safe mode, select:

Start → Control Panel → System → Devices

If any drivers have yellow or red exclamation point (What points to conflict drivers), or there are duplicate drivers, then you need to delete and install these drivers again.

Common litigation system

Because each new programinstalled in Windows leaves part of itself in the registry of the system, then with time it can slow down the computer. Basically, it concerns libraries and other common files. In addition, when deleting any program, the system can ask whether to delete a particular file. It is safe to abandon such a sentence - even if the removal program claims that the files are not used.

Unfortunately, this leads to slow operation of the system. Why began to slow down a computer with time? Non-working labels clogged windows registry, filled basket, old libraries and drivers from already unused devices - all this negatively affects the speed. This is especially noticeable when loading and. It is treated or cleaning the system, as we have already written above, or.

After completing the work on the above algorithm, you will definitely at least improve the performance of your computer. If the results seem unsatisfactory, try the following:

• Perform full reinstall Systems. So you are rooted by a number of questions, however lose the previous application settings. Before starting actions, do not forget to recrep your files to another media: otherwise they will be erased.
• Replace RAM, video adapter and other components that can slow down system operation.
• If you do not want to think what the components you need to purchase, - buy completely new computer. Sometimes, especially if your car has been many years, this is the most reasonable option.

On this, our article is over. We hope that she helped you navigate why the computer slows down and works slowly. Come on websitewill be even more interesting!

Hi friends. You encountered the need to make a screenshot? Then read this article, and I will tell you about several ways to take a screen shot.

The Internet has become an integral part of everyday life of each of us. We are visiting social networks every day, we communicate in the forums, we are looking for a decision of any problems, as well as give advice to solve these problems to other people. And sometimes, when an explanation of a question is required to back up visual information, screenshots come to help.

The definition of this word is quite simple - this is a snapshot of the screen of any electronic deviceTo which the computer monitor, smartphone and other modern gadgets can be attributed. It would seem that it could be easier to make a screenshot? But some people face difficulties when there is a need to draw a screenshot, and seek help from search engines.

If you are one of these people, then read this article in which I will tell you about several ways to create a screenshot from the computer screen.

PRINT SCREEN button

The easiest way to make a screenshot is to use the button. PRINT SCREEN.. In order not to bother you searching for this key, I made a photo on which I highlighted it. On the usual computer keyboard this button Looking here:

If you have a laptop, the PRINT SCREEN key is here:

So, where is she, we figured out what's next? And then click on this key. Perhaps one of you will say that by clicking on the key, nothing happened or will search where the screenshot has been preserved. But do not rush, since the screenshot is preserved only in the memory buffer, and to get it, we need to open graphics editor Paint.

I think with this editor, each of you is familiar with this editor, but just in case I will still write, where it can be found: Start - Standard - Paint. Open it and click insert:

After that, a snapshot of your screen will be inserted into the window, which you will be able to edit:

Here, in general, everything, after that, we can only save our snapshot in any convenient folder by clicking on the save icon:

This method is suitable for absolutely everyone, as it works in all versions of Windows.

Tool "Scissors"

Another way to take a picture of your computer screen is to use the "scissors" tool, but if you have a Windows XP or an earlier version, then this method does not suit you, since the tool is only in Windows 7 and 8.

You can find this tool in the same folder as Paint. Open scissors:

Click Create and highlight the screen area you want to fall out. After that, you will appear in front of the screen fragment, which you can also make some minor actions, and save it:

Where to fill the screenshot

Each of us has their own reasons why we need to make a screenshot, but, as a rule, most pictures are being done in order to place them on the Internet. Of course, you can accommodate the resulting snapshot to your site or on page in social networkBut how to place it on a third-party site?

Especially for this there are photochostings created just in order to accommodate your image there. They work quite simple: you pour your screenshot there, in response you are a link to your image that can be placed on any site. Let's see the example of one of these services as they work. I used to use photo hosting RadicalTherefore, in his example and show how to upload a screenshot. I open it:

Select the image to download and click "Download". After that, your image will boot, and you will receive links for its placement on other Web resources:

Third Party Screen Snapshots

What do you think, how long will it take to take a picture of your screen by ways that I described above and pour it on photo hosting? I think you will spend no more than two minutes. But each of us really appreciates your time and does not want to lose even these precious minutes, looking for more simple ways Make a screenshot.

And how funny it did not sound, such a way really exists. It allows you to kill one shot of two hares, in our case make a screen shot and pour it on photo hosting in one click. Under this method implies use third-party programs To remove the screenshot. There are also a lot of such programs, but I recommend to stop my choice on Lightshot, you can download it link.

By setting this program, it is enough just to press the PRINT SCREEN button, after which you will need to highlight the area in which you want to make a screenshot, and it is ready. You will immediately be asked to edit the resulting screen shot, or save it, and both on your computer and the bay of it on the photo hosting, after which you will give a link to your image.

Unfortunately, I can't do screenshots to work with this program, since during her launch the desktop becomes not active, but I think you can figure it out without me, because everything is extremely simple.

For creating a screenshot of the screen in Windows 7, 10 and more early versions Systems responds with a button on the keypad called Print Screen. Most often indicates its abbreviated name - PRT SCR. The key is usually located in the upper central or right side of the keyboard, immediately behind the F1-F12. Before pressing on it, make sure that the screen is displayed exactly as you want to capture it. The most difficult for the newbie begins it precisely after clicking on Print Screen, since at first it is not clear where the screenshot is saved. But just the user itself and defines the path of the screenshot location, for which you will need to perform a few more action.

Open any image editor, for the role of which the standard Windows program is fully suitable - MS Paint. The application is in the Standard Programs section, access to which opens through the "Start" menu. As soon as MS PAINT starts, click on the Edit menu section and select "Paste". The computer screen screenshot that you will immediately appear in the main field of the program. The same action of the image insertion can be performed using the CTRL + V button combination. Make sure that you are satisfied with the screenshot. Otherwise, you can use the program toolkit for correcting it, for example, highlight and cropping extra edges or turn the image. After that, go to "File" - "Save As ..", where you need to specify the folder to save the screenshot and click "Save". The image will immediately appear in the selected folder and will be available for further use.

We give the advantages and disadvantages of the method described to make the screenshot of the screen on the computer using the keyboard. Its advantages are as follows:

• comparative simplicity and accessibility;


• compatibility with all versions of Windows;


• data security.

Despite the number of action desired and preservation, the method "Print Screen + Paint" remains the most affordable and understandable for both beginners and advanced users. To obtain an image, it is not necessary to resort to the help of extraneous programs and people, which makes it possible to prevent the leakage of personal data and infect the computer with viruses. However, there are deficiencies in such a way:

• a large number of actions;


• tangible time costs;


• keyboard dependence.

To the method of capturing the screen via the PRT SCR key, you need to get used to some time, therefore confusion often arises in the sequence of actions, because of which it comes again and again to contact the help of specialists. In addition, not everyone can be at hand working a working keyboard with the desired key, so each self-respecting user of a personal computer is obliged to understand additional way getting a lined snapshot.

How to make a screenshot of the screen on the computer, if there is no PRINT SCREEN button

A lot of users are interested in how to take a picture or laptop if there is no necessary PRINT SCREEN button? For a start, it is still worth looking for it, because, as already mentioned earlier, it can be called differently: PRT SCR, PRSCR or even just have a screen icon. The location of the key can also vary depending on the equipment. However, on the oldest computers, which are still installed in many Russian offices, there is really no PRINT SCREEN button. In this case, special programs will come to the rescue, with which you can easily make the screenshot of the screen on the computer or. Also applications will become an excellent solution for those who simply want to reduce the creation time and save the scrup.

There are a great many all kinds of programs to create a screenshot, but it is best to immediately pay attention to the simplest and free AppsWhich at the same time has long been well proven among ordinary users. If you try to install the first program in the network, there is a big risk just not to figure it out in all its function or, even worse, pick up the virus from the site on which the intruders are operating. So, one of best applications In kind of finding Lightshot. The program is quickly installed and integrated into the system, starting to start when it starts. In the settings, you can assign any key to create a screenshot, while after pressing its image is immediately saved in a user-friendly folder. Thus, it is created in just one step.

You can use the nearest analogue of the LightShot - the Screenshoter program, which has similar functionality, and which also allows you to make a screen screenshot in one action. Very good for convenience are Snagit and Clip2Net, which also have their own image editor, allowing you to quickly and easily process the obtained screen. However, there are certain disadvantages in the method of photographing the screen using applications:

• compatibility not with all versions of Windows;


• deterioration of system performance;


• temporary exploration costs.

Alas, but most programs actually do not work on the oldest computers, and if installed, then significantly slow down the system with a weak hardware configuration. In addition, it will take some time to learn all the functions of the program and remember how to use it. However, in the future the process of creating screenshots can simplify ten times. Thus, each user decides in its own way, what method fits it best. If you have to rarely do the screenshot of the screen on the computer, it will be enough to remember the procedure "PRT SCR + Paint", but if such a need arises daily, it is worth thinking about the choice of the program suitable for the convenience.

In this lesson, I will show how to make a screenshot (screen snapshot) on a computer and laptop. We will learn to photograph the entire screen or part of it.

Screen on PC and laptop

Screenshot (eng. Screenshot) is a screen shot, a picture of what a man sees on a computer.

To create such photos on the keyboard there is a special PRINT SCREEN button. It can also be called PRT SCR, PRTSCR, PRT SC, PRTSCN or PRNTSCRN.

After pressing, nothing happens - neither clicks or flashes. But the photographed screen will be fixed in the PC memory. So that this picture is displayed, you need to insert it into the program to work with images. For example, in Paint.

The most popular way to create screenshots:

1. Press the PRINT SCREEN button on the keyboard.
2. Open Paint Program.
3. Insert a snapshot into it.
4. Save on your computer.

But there are other ways. Read more about each I will tell further.

In the Paint program

Consider on the steps how to make a screen through Paint. This is the most popular way, because paint There is on each computer.

one . Press the PRINT SCREEN key on the keyboard. It is not necessary to hold it - just press and release it once. It happens, on a laptop you need to press two keys at once: Fn and Print Screen.

2. Open "Start" and at the end of the list, select "Standard Windows". And from it, select Paint.

And you can still right in open menu "Start" Print Paint and launch the application.

3. Insert a snapshot. To do this, click on the "Paste" button at the top on the left.

The screen of the screen will be added to the program window.

four . Edit the snapshot if necessary.

Since the photo received more program window, it usually goes beyond paint. Its scale can be reduced through the slider in the lower right corner.

For trimming too much, use the "Highlight" tool. Click on it and hold the left mouse button to highlight the part of the snapshot you want to leave. It should refer to the dotted line.

Then click on the "Trim" button at the top ().

Increase up to 100% through the right lower slider. So you will see a real picture of what happened.

five . Save the result on your computer.

To do this, click on the "File" button at the top and select "Save As ...".

A conservation window will appear. Go through it to the computer folder where you need to place the image. For example, if you want to add it to your desktop, then in the list on the left, select "Desktop".

In the "File Name" field, type the name for the snapshot. Usually it is default called "Unnamed". You can print the number instead.

If necessary, change the file format in the bottom field. In most cases, PNG or JPG fits.

6. The screenshot will be recorded in the place and under the name you indicated when it is saved (see the previous item). It will be an ordinary file photo that can be recorded on a USB flash drive, send by mail, publish in social networks, etc.

On a note . If you need to take a snapshot of only one window, which is open at the moment, click the Alt and Print Screen key combination.

In the program scissors

Scissors ( Snipping tool) - this is special program To create screenshots. It is originally in Windows 7, 8 and 10 (but not in all editors).

Open "Scissors" can also be as well as Paint: Start → Standard - Windows → Scissors.

Or printed the word scissors right in the open menu "Start".

This is what the program window looks like:

Click on the "Create" button - the screen will burst. Holding the left mouse button to highlight the part you want to photograph. After you release the mouse button, the image will be added to the program window.

Recording the image on the computer occurs the same way as in Paint (see).

On a note . In some editions Windows Programs "Scissors" no. Therefore, if you did not find it on your computer, it means that it is originally absent in your system. Use one of those programs about which I tell.

Through a combination of keys

IN windows system 8 and 10 to make a screenshot through a combination of keyboard keys WIN + PRINT SCREEN. The image will immediately be saved to the folder "Screenshots" folder.

To do this, press the Windows key () and without releasing it, the PRINT SCREEN key.

Now open the Image folder. There will be a folder "Screenshots", and inside your picture.

And in Windows 10, with a combination of the Win + Shift + S keys, you can run the "sketch on the screen fragment". This is an enhanced version of the application "Scissors" - there are more editing tools there.

Services to create screenshots

To create screenshots, you can use special services on the Internet: pastenow.ru, makescreen.ru, snipboard.io and others. There are editing tools in them: trimming, turning, printing text, arrow, line, shapes.

How to make a screenshot through the service:

1. Take a picture by pressing the Print Screen key. Or only one active window by pressing Alt + Print Screen.
2. Go to Pastenow.ru and insert the image by pressing Ctrl + V.
3. If necessary, edit the snapshot and save it: right-click on the photo - "Save the picture as".

On a note . To send screenshots on the Internet it is better to use the site prnt.sc. Load the image and get a short link - it will be available on it to everyone on the Internet. This link can be sent by mail, via social network or messenger, publish on the site / forum.

Programs for screenshotov

To create screenshots, there are separate applications. They are comfortable if the pictures need to do often. Next, I will briefly tell about the most convenient free programs.

In all Windows operating systems, up to the newly appeared Windows 8, the screen shot is saved only in the clipboard. The clipboard is rAM. Usually you use the clipboard, when you copy something and insert in another place. For example, highlighting the text, and clicking on Ctrl + C, you place the selected text in the clipboard. Later you can insert this text at any convenient place.

The same thing happens and when you click on the PRINT SCREEN key. The Windows operating system takes the screen shot (picture with everything that happens on your screen). After the screen snapshot is created, the operating system places it in the clipboard.

After that, the screen snapshot is available to the user. It can be inserted into any program that can work with images. In order to insert the resulting screen shot, it is enough to use the usual combination of the Ctrl + V keys or the "Paste" command from the context menu.

Most often, the Paint program is used to save the screen shots. It is installed with the operating system and is available in the "Start - All Programs" menu. You can also run it using the search or the "Run" menu, which is started using the Windows + R keys combination.

It is necessary to recall that, besides the simple click on the Print Screen key, you can use a combination print keys Screen + Alt. In the case of using such a key combination, you will receive a snapshot of only one active window, that is, the window that is at the very top and with whom you work. Naturally, the screenshots obtained by the Print Screen + Alt combination are stored in exactly the same way. After creating a screenshot, it is placed in the clipboard, after which it can be inserted anywhere.

How PRINT SCREEN is saved in the Windows 8 operating system

Everything works exactly. But there is one feature, except for old key combinations Print Screen and Print Screen + Alt, there is another one - Windows + Print Screen.

The Windows + Print Screen key combination automatically saves the screen snapshot to the library \\ image screenshots. So you immediately get ready FileAnd you do not have to run Paint to save the screen shot.