Windows 10 does not work in Safe Mode. Selecting the start mode by pressing the F8 button

In this article, you will find several easy ways to enter the secure windows mode 10 (in English terminology it is called Safe Mode ). Most often, users do not understand how to boot into safe mode, if . After all, the F8 key will most likely not work at boot. But first things first.

1. How to start Windows 10 Safe Mode using msconfig

Right click on the button Start.
Please select Execute:

Enter the command msconfig.
Click on OK:

Check the box Safe mode.

Click on OK:

Restart your computer:

Attention! To boot your computer in normal mode, you will need to run again msconfig, uncheck, press.

2. Entering safe mode with the SHIFT key

This method is useful if, when entering account the computer freezes or a banner appears or something else.

Press and hold the SHIFT key.
Click on the power icon and select:

Select item Diagnostics:

Extra options:

Boot options:

Reboot:

After a while, you will see the following window. Press the key to turn on safe mode. 4 or F4:

The subsequent steps are identical to those described above.

How to enter Safe Mode if Windows 10 won't boot

If Windows 10 does not boot even to the welcome screen (where you can reboot using Shift), follow these steps:

1. Create bootable USB drive using another computer software.

2. Boot from this flash drive ().

3. Select a language:

5. Select Diagnostics:

6. Extra options:

7. Command line:

8. Enter

Bcdedit / set (default) safeboot minimal

9. Restart your computer. It will boot into Safe Mode.

To restore normal boot mode, call msconfig from safe mode:

uncheck the box Safe mode, click OK:

And after that, restart your computer. Windows 10 will now boot normally.

Experienced PC users know about such "Windows" option as "Safe Mode". It is necessary in modern operating systems, because the latter are by no means sinless. Errors happen, and sometimes it is impossible to correct them in working order. With XP and 7, everything was more or less clear. But with version 10, things got much more complicated. Standard entrance disabled in safe mode. Now this is not so easy to do. What caused this decision of the developers is not clear. But the fact that the seventh version was much clearer than the newfangled "ten" is indisputable. However, in the days of XP, they said so. So, most likely, users will get used to this "miracle". So how do you enter Windows 10 Safe Mode? We will talk about this to them.

What is Safe Mode?

Safe Mode is a way to boot the system with only the most important drivers. That is, only those components will be loaded that are necessary for the minimum system performance. No additional codecs, flash or other unnecessary crap. This mode is used to fix operating system errors, return to an early state using system recovery. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter Safe Mode in Windows 10.

Sometimes from this state of the OS is required to fix the "accounting" or local conversion. Naturally, to carry out this procedure, you need access to the Internet. And here the option "Safe Mode with Boot" will help. network drivers". Users of the" top ten "need to choose this option, because there is no way to fix the account without the Internet. And this again brings us back to the question of how to enter Safe Mode

How to enter if the OS starts up?

There are various options for loading tens in safe mode if everything works fine. The easiest one is to click on "Shutdown" with the "Shift" held in "Start". Then you will be prompted to choose the type of download. You just have to choose the one you need. Also try to "return" the start of the mode by pressing F8. You just need to write the desired text in the commander's line. How to enter Windows 10 Safe Mode via Command Prompt? More on this below.

There is another option. Enter "Parameters" and further - A lot of unnecessary text appears with the available options. Among others, there will be items "Restart the computer in safe mode" and "Restart the computer in safe mode with support for network drivers." We choose the one that is needed in this moment, and restart your PC or laptop.

You can also try this procedure. Go to "Start", select "Run", enter "msconfig" (without quotes). A dialog will appear, in which there will be a "Download" tab. Among the fair amount of items there will be "Boot Options" and "Safe Mode" with a bunch of options. Here it also needs to be ticked off. And then just restart your PC.

Using the command line

Go to "Start", select the "Command Line" item and enter the text in the Commander: "bcdedit / set (default) bootmenupolicy legacy" (without quotes). Then we reboot the car and press F8. Windows start options window will appear. Here we select "Safe Mode". And whether you need network drivers - decide for yourself. This is one of the answers to the question of how to enter safe mode

The commander is usually responsible for the most various problems... But in the top ten it is best to use Windows Power Shell - a console borrowed from the Linux operating system. This tool allows you to execute commands as an administrator and works much faster than the standard commander. And it is clearer to those who have used "Ubuntu" or "Mint" at least once. The command line method works on any Microsoft operating system (except XP). The Redmond company did something adequate. Honor and praise to her!

What if the OS won't start?

There is only one way to go. There is no way to run Windows in Safe Mode. Therefore, you need a USB flash drive with a distribution kit of "tens". When loading the installer, you can turn a feint with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription "System Restore" in the welcome window of the installer. A commander will appear there, into which we enter the text already familiar to us (without quotes). Now restart your PC or laptop. This is one of the answers to the question of how to enter Windows 10 Safe Mode through BIOS.

Many people think that if the operating system doesn't want to work, then the easiest way is to reinstall the OS. On the one hand, this is so - a clean system always works faster. But on the other hand, frequent reinstallations of the operating system are sure death for hard disk... Not to mention the fact that a lot of time needs to be killed for full customization systems. This is without taking into account the time to install it. Therefore, it is easier to solve all the problems that can be fixed by using Safe Mode.

ASUS Laptops

There are some nuances here. The fact is that ASUS laptops have a kind of entrance to the boot menu (media selection at boot). Before performing actions with the commander in the tens installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold down Tab at startup and select the desired boot type. How to enter Windows 10 Safe Mode? ASUS is the same PC. That is, the method with the commander from the dozens installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why engineers deviated from the standard canons and assigned some deranged keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your "correct and standard" actions can lead to very sad consequences.

Acer Laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the BIOS of the laptop. Then go to the "Boot priority" tab and select our flash drive with the "tens" installer. Now, be sure to reboot the device. The laptop will boot from the drive, not the HDD. How to enter Windows 10 Safe Mode in Acer E5-731? With the help of the commander in the installer. Exactly the same as in the previous examples.

With Acers, everything is somehow incomprehensible. This method of getting to drives with distributions was used in the ancients system blocks with processors from AMD and why manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and prioritize starting from the HDD. And this is completely inconvenient.

Lenovo Laptops

How to enter Windows 10 Safe Mode through Lenovo laptop BIOS? It's easiest here. It is enough to press the F12 button at the start of the device - and the media selection menu will appear. Select the USB flash drive and boot. And then we proceed according to the already known scenario with the command line and the required command. Laptops from Lenovo are the simplest in this regard. The Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more eminent brands in quality and arrangement of controls. And in the case of Windows 10, they behave more adequately than other models. There's even an interesting Safe Mode option for those using UEFI. It is enough to hold down Delete at start - and launch options will appear. Why is it not lovely?

Conclusion

Of course, getting into Safe Mode in Windows 7 was much easier. But even in the "top ten" it is just that the developers have made it less accessible. But with the help of certain commands or actions, it is quite possible to load the operating system in this mode. And then you can fix errors in drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problem.

If none of the above methods helped fix system errors, that is, at least two paths. The first is to reinstall the entire operating system. This advice is not devoid of common sense, since the fresh "Windows" always works better and faster. If you do not know how to install, or you do not have free time, then there is only one way out - to carry your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.

Windows 10 developers made sure that the system restore processes took place in automatic mode, but they still retained the ability to enter safe mode. However, familiar to more early versions OS Windows method login using the "F8" key no longer works in Windows 10.

How to activate a familiar function? What keys and buttons should I press when loading the OS to start in Safe Mode? Below is the detailed description different ways to boot Windows 10 in Safe Mode.

We enable loading Windwos 10 in safe mode via msconfig.

For this you need:

Press the key combination "WIN" + "R";
In the text area, enter the command - "msconfig";
Confirm by clicking "OK";
Then, in the menu that appears, open the "Download" tab;
Select the operating system with a single click of the left mouse button and check the box in the "Safe Mode" column;
Also in this window the user has access to a choice of OS boot modes, it is recommended to leave a mark on the "Minimum" item by default;
Click "Ok";
Ready. After restarting, Windows 10 should boot from Safe Mode.

Note: To start Windows in normal mode, you need to uncheck the box "Safe Mode" using the same instructions.

This may seem strange to experienced users, but it is very important not to confuse Safe Mode with and be aware of the differences.

Sign in to Windows 10 in Safe Mode - adjust settings.

To restart Windows and open it in Safe Mode, you need to change the startup options. For this you need:

Go to the "Start" menu;
Click on "Options";
Next, in the window that appears, enter the "Update and Security" tab;
Then, in the menu that appears, open the "Recovery" tab;
Click the "Restart now" button;
Then click "Diagnostics";
Click "Additional parameters";
Then enter the "Boot Options" menu;
Click "Restart";
Wait until the menu of additional options for starting the computer appears on the monitor and highlighting suitable way download click on "Enter";

Entering in safe mode allows you to solve many problems, for example, when or it is necessary to change tables, etc.

Restart + Shift starts Windows 10 in Safe Mode.

The algorithm of actions consists of several sequential stages:

Enter the "Shutdown" window through the "Start" button;
Then hold down "Shift" and click "Restart";
Then, using the previous instructions, restart the PC.

But all of these methods work when you can log into Windows 10 and it starts successfully. But what if there are problems at the entrance, for example, others? See below.

Entering Safe Mode if Windows 10 won't start at all.

If all the above methods did not help, then you need to use a removable installation media systems, boot disk or a USB flash drive.

Algorithm of actions in this situation:

Boot from a disk or flash drive by changing the startup settings in BIOS;
After downloading, select the "System Restore" section;
Then go to the "Diagnostics" section;
Enter the subsection "Additional parameters";
Click on "Command line";
In the displayed console, type bcdedit / set (globalsettings) advancedoptions true
Press the "Enter" and "Continue" key;
Wait for the additional launch options menu to appear on the monitor and select safe mode;

To restore the standard launch option, you will need to call the "Start" - "Command Prompt" context menu and enter the command:

Bcdedit / deletevalue (globalsettings) advancedoptions

At re-launch- Windows 10 will work normally.

Here are some simple ways to start Windows 10 in Safe Mode. There is something to add - leave comments below.

Safe mode (English - Safe Mode)- diagnostic mode, in which all unnecessary drivers and Windows functions are disabled. It is used to troubleshoot PC problems. You just need to run Safe Mode and fix the errors, after which the PC will work as it should again.

When might you need to enter Safe Mode? For example, to solve a problem when.

Also in this way you can remove viruses, reset your password, fix errors (incl. blue screen death), restore the system, etc.

There are several ways. Plus, they differ slightly depending on which operating system you have. Therefore, below we will consider all available ways how to enter Windows Safe Mode.

There are 2 universal methods that work for everyone. Windows versions- XP, 7, 8 and 10. They are also the simplest. Let's start with them.

Login via msconfig utility

The first way is through a special utility. To do this, you need to follow a simple instruction:

Press Win + R (the button between "Ctrl" and "Alt") and enter the word "msconfig".
In the new window, select the "Download" tab, indicate the desired OS and put the checkbox in the "Safe Mode" item. There are a couple of sub-items here - it is recommended to choose either "minimal" (standard) or "network" (in this case, there will be access to the Internet).
Click "OK" and restart your PC - now it will turn on in safe mode.

When you fix the errors, do not forget to return the computer to normal startup mode! This is done in the same way - using the msconfig utility (only now you need to uncheck the box).

There is a small nuance here: in this way you can enable safe mode in Windows only if your OS boots normally. If you can't even load the desktop, then use the second method.

Login with F8

This method is suitable for those whose PC or laptop does not turn on (the desktop does not load, the monitor goes blank, etc.). In this case, do the following:

Turn on your PC (or laptop) and immediately press the F8 key repeatedly until a menu appears (in some cases, you need to press Shift + F8).
If the Windows logo appeared or the screen went out, you did not succeed. Wait for the system to fully boot, then restart your PC and try again.
When you do everything right, a menu will open, where, using the arrows, select the "Safe Mode" item (the best option).

P.S. This method does not work on Windows 10! This feature has been disabled by the developers.

Special boot options for Windows 10

If Windows starts, then you need to do the following:

What if Windows 10 won't start? If the PC boots before the login screen, then the "Special Boot Options" can be opened in another way. To do this, click on the power button icon (in the lower right corner), hold down Shift and select the "Restart" item.

We use a disk or flash drive

This is the most reliable way to boot Windows 10 in Safe Mode. But in this case, you need a DVD or (you can burn them on any PC or laptop).

Plug in a USB stick or insert a disc, load them (), and then do the following:

After loading, press Shift + F10.
After opening command line enter - bcdedit / set (default) safeboot minimal.
Then close it and restart your PC. It will turn on.

To return to normal PC startup, write the following on the command line: bcdedit / deletevalue (default) safeboot.

This can be done in the same way (or as administrator ) .

You can also enable the mode in Windows 8 in 4 different ways.

The first two are detailed at the beginning of the article. The other two are quite similar to the options that are suitable for Windows 10, but we will still look at them in more detail to make it easier for you to navigate.

Diagnostic tools

So, the first way is to activate the buffer format (only suitable if the OS is working properly). To do this, do the following:

The PC will start in Safe Mode, and you can carry out the necessary manipulations.

And one more simple option for starting Safe Mode in Windows 8 - through a bootable USB flash drive or DVD with Windows files... The procedure is as follows:

How to be on Windows 7 and XP

You can enter Safe Mode in Windows 7 or XP using one of the following universal ways described at the beginning of this article. The first option is suitable in cases where the OS is working properly, and the second - if the PC or laptop does not turn on.

It is worth noting that the operating system is in no way tied to the BIOS. It also doesn't matter what brand of laptop you have - Samsung, Asus, Lenovo, HP, Acer, LG, etc.

What if Safe Mode won't launch?

Sometimes a PC or laptop stubbornly refuses to enable Safe Mode. The reason is banal - viruses damaged the Windows registry. In situations like this, there are only 2 options:

restoration of the PC (rollback of the system to the checkpoint);
installation of special programs.

The optimal, of course, will be the first method - restoring the computer from a checkpoint. If you have not saved them (for example, disabled), then only the option with the installation of recovery programs will remain Windows registry... In this case, you can use the free Safe Mode Repair or SafeBootKeyRepair.

Previously, by pressing the F8 key at the very beginning of the operating system boot, you could call the selection menu special options boot Windows. So you could enter system safe mode, safe mode with command line support, select simplified video mode, etc. This method worked up to and including Windows 7.

Everything has changed since Windows 8. To speed up the system loading, this method was abandoned.

But how do you bring up the Special Boot Options menu now? And for example, enter Windows Safe Mode?

I learned four ways.

Command line

In the command line, execute shutdown -r -o -t 0 Here, the "-o" parameter (this is not a zero, but a letter) invokes a menu for selecting special Windows boot options. The system help says about this option "Go to the advanced boot options menu and restart the computer. Must be used with the / r option." The "-r" option causes the system to reboot.

And the parameter "-t 0" indicates in how many seconds to reboot the computer. In our case, zero orders the overload immediately.

If you need to enter a password when turning on the system, click on the shutdown icon in the lower right corner of the screen. On the screen, the mouse points to this icon. A menu will drop out as in screenshot 1. Press Shift key and click on the "Restart" command. I apologize for the quality of the screenshots, but this is how I took off my phone. This method is similar to the second one, only here the system is fully turned on. In the Start menu we find the same shutdown button as in the previous chapter. And also hold down Shift on the keyboard and click on "Restart". Press the Win + I combination on the keyboard. The Windows Settings window will appear. On the left side of the window, select "Recovery" and then the "Restart now" button will appear on the right side. If you think Windows will now just suggest additional options boot, then keep the pocket wider. In all ways, she behaves the same. The system starts to overload and asks a few questions in the process. On the Select Actions screen, select the lower option "Troubleshoot". On "Advanced Options" select "Boot Options". The mouse is just pointing at them. The "Boot Options" screen where you can select specific ways to boot Windows As you can see in Screen 6, here you can:

Enable debugging
Enable boot logging
Enable low resolution video mode
Enable Safe Mode
Enable Safe Mode with Loading Network Drivers
Enable Safe Mode with Command Prompt
Disable mandatory driver signature verification
Disable early launch anti-malware driver
Disable automatic restart after failure

Using the keyboard buttons 1-9 or F1-F9, you can make the choice we need. For example, safe mode can be called with the 4 or F4 button, and you can disable the mandatory driver signature verification with the 7 or F7 key.

www.nastroj-comp.ru

How to add Safe Mode to the Windows 10 boot menu

Sometimes there are situations when you need to use Safe Mode, but in Windows 8 and 10 it is not so easy to enter it. To make it easier to enter Safe Mode, you can install the appropriate function, which, when you start the computer, will offer a choice in which mode you want to start the system. Let's see how to do all this?

Safe Mode in Windows 10 Boot Menu

You can enter Safe Run in Windows 8, 8.1 and 10 in several ways, which we already wrote about in the article "How to start Windows in Safe Mode". On a loaded system, you can call Extra options and it is easy to make sure that after a system reboot, the computer starts in safe mode. Login is done a little differently when there is no way to boot the system - then when you start the computer, you need to press the F8 key until a menu with options for loading the system is displayed on the screen.

Unfortunately, using the second method is often problematic - our readers have repeatedly written that they had problems logging into Windows 8, 8.1, 10 and the F8 button did not help. In this regard, we propose to review several other solutions on how to enter safe mode in Windows 10. You can add it manually to the "boot menu" system boot menu. In other words, we can make the computer always "ask" us when it is turned on which mode you want to start Windows in - normal or safe. Then, in case of problems with it, it will be possible to easily restore it. How to make Windows startup 10 in Safe Mode from the Boot Menu?

Step 1: Adding New Entries to the Windows Boot Menu

First, you need to add the appropriate entries that will be responsible for starting safe mode. We will add the following three entries via the command line to the launch menu:

To do this, you need to press the combination on the desktop Windows keys+ X. In the menu that appears, select the "Command line (administrator)" item.

Type or copy the following commands into the command prompt window and confirm each of them by pressing Enter:

Of course, all of these individual entries are optional - you can add one or the other according to your needs. If your computer has several operating systems, then for each entry you can add the name and version of the system (for example, "Windows 10 - Safe Mode"). This will help you distinguish which operating system the specified entry on the menu.

Step 2: Configure the added entry in the boot menu

At this point, the added entries do not work as expected because it is not specified what each one should do. That is, at the moment they do not indicate a specific safe mode option. In this case, we do the following. Press the key combination Windows + R, then type the command "msconfig" and confirm it by pressing Enter. The system configuration window will appear.

Go to the "Downloads" section, where all entries of the system startup menu are located. Here we see the default entry, which is responsible for starting the system, as well as the options we added to enter safe mode. Now, for each entry, we will set the appropriate login parameters.

To enter "Safe Mode" in the Boot Options section, check the "Safe Mode" and "Minimum" fields.

For the entry "Safe mode with loading network drivers" mark the "Network" parameter.

To start "Safe Mode with Command Line Support" enable the "Other shell" option.

When configuring each option, also check the "Make these boot parameters permanent" checkbox. Save the settings with "Apply" and confirm the changes made in the startup menu with "OK".

After that, a message will appear stating that the changes will take effect after the computer is restarted - we agree, and now we see that when the computer starts, a menu appears, which offers a choice, in addition to normal boot, the options we added to enter Safe Mode.

How do I remove entries from the boot menu?

If in the future you go to delete the entries and leave only one initial one responsible for starting the system in normal mode, just enter the system configuration via msconfig, go to "Downloads", and then select the safe mode options one by one and click on the "Delete ".

InstComputer.ru

Downloading Boot Menu on laptop and computer

Boot Menu is a menu that allows you to select the device that the system will process first. This function is actively used to replace operating systems and to carry out diagnostics, such as random access memory with MemTest.

This function is extremely convenient, as it is intended for a one-time start of the equipment as the main carrier. This same function is needed when Windows installation, since it does not require changing the boot priorities in the BIOS.

After completing the actions required to enter the menu, all devices that are connected at the current time in the computer, and with which the program is potentially likely to start, will be displayed.

Unfortunately, there is no one denominator in the question of entering the described menu, since there is no hard standard in this industry yet. Nevertheless, there is a dependency between the manufacturer and the actions required to launch the Boot Menu, which will be discussed in detail in the article.

Boot Menu is used to specify from which device the program should be launched. Of course, the BIOS already has such functionality, but for one-time use, for example, a program, it is better to use the boot menu.

An interesting question is how to call the boot menu on motherboard the fact that there are no standards in this regard. Each manufacturer uses different options. Most often, a hint appears on how to go to a section. In general, the buttons F8, F9, F11, F12 and Esc are used.

How to format a USB stick? Formatting software

To launch the desired menu, press the key corresponding to your brand of motherboard during system startup. Often, several of the above buttons are used. You can get more accurate information by going to the section that corresponds to the manufacturer of your computer.

There are also slight differences in launching the required menu in monoblocks and laptops that have Windows 8 and higher preinstalled.

How to enter the boot menu on a netbook? - To complicate matters, laptop computers might not use a full shutdown, but instead hibernate. This option is quite justified, since it returns the PC to a working state faster, but is not suitable for entering the menu. All you need to do is turn off the netbook completely, hold down Shift, click on "Shutdown". If this does not help, then you need to configure the "Power supply" section.

The thing is that personal computers in this configuration most often use hibernation mode instead of the usual shutdown. Often this has a positive effect on the boot time of the system, and the processes that were launched in the previous session are restored, but in this case we this method is not suitable, for this use one of the following options:

1.Restart the computer using the corresponding option in the menu, you do not just need to turn off the button and turn it on again, for the reason just described;

2. At the moment when you press the "Shutdown" button, hold down the Shift key, thanks to this procedure, the PC will turn off fully, then press the desired key at the time of startup;

3. You may need to disable Fast Startup.

Open the "Start" menu;
Go to "Control Panel";
Select the tile with the name "Power supply";

Follow the link "Actions of the power buttons";

Disable the "Quick Start" item.

How to restore the BIOS after an unsuccessful firmware After completing these steps, at the time of system startup, you will need to press the necessary key, usually Esc, F8, F9, F11, F12. More detailed information for your motherboard model is indicated below in the corresponding paragraph.

This manufacturer on all configurations of computers, all-in-ones and laptops uses the same key to enter the Boot Menu, this button is F12. A distinctive feature is only an item in the BIOS or UEFI, which includes the necessary handler, that is, nothing will happen until you enable this function, sometimes it works by default, for this:

1.Go into BIOS, for this boot press F2 or Del;

2. Find the item "F12 Boot Menu";

3. You need to replace the value with "Enabled";

4. Restart your computer.

After performing these manipulations, the boot menu should become available by pressing F12.

For the vast majority of computers at the base of which this platform is located, you need to press F8 to launch the Boot Menu, but with laptops everything is a little more complicated, there is some division here.

For most Asus laptops, the Esc button is used, but this is more likely for more or less modern PCs, and for models that start with K and most with X, F8 can be used.

It is quite easy to go to the menu of interest thanks to the F12 key, it is used in all models. This situation also applies to monoblocks from the same manufacturer. Distinctive feature is a special button located on the case, next to the standard inclusion, usually a circular arrow is drawn on it, by clicking on it you can get to the menu of special options for starting the system.

Information on other manufacturers

For most manufacturers, it makes no sense to describe the instructions for switching to the Boot Menu, since the only difference is the required key, and everything else works according to the standard scheme, so:

Dell Laptops, Toshiba and motherboards Gigabyte boards- F12;
Samsung laptops and Intel motherboards - Esc;
HP Laptops - F9;
AsRock and Motherboards MSI boards- F

Windows 10 does not see the CD / DVD drive, what should I do?

This should be enough to launch the Boot Menu with any configuration of the computer, if you have a little-known manufacturer, you should use the instructions that should be presented on the manufacturer's website. If you still have questions on the topic "How to enter the Boot Menu on a laptop and computer?", You can ask them in the comments

Was the material helpful to you? Leave your review or share in the social. networks:

(1 ratings, average: 5.00 out of 5) Loading ...

tvoykomputer.ru

How to enter Boot Menu on laptop and computer?

Want to boot your computer from a flash drive or disk? To do this, you do not need to go to BIOS settings... Especially if you don't understand much about this. There is an easier way. In this case, just go to the Boot Menu and change the boot priority of devices. This is done in 10 seconds. And most importantly - no shamanism in BIOS.

What do users usually do to reinstall Windows? As a rule, a licensed digital copy is written to a bootable USB flash drive via UltraISO, and then the BIOS is configured to boot from the USB flash drive. In principle, this is not difficult, but there is a simpler option - calling the Boot Menu. What is it?

Boot Menu (or boot menu) is an extremely useful BIOS option. It can be used to quickly set the boot priority of devices. Simply put, launching the Boot Menu calls up a small window in which you can immediately put a USB flash drive (or DVD) in first place, and HDD- for the second. In this case, you will not need to enter BIOS.

In addition, changing the settings in the Booth Menu does not affect BIOS settings... That is, this option is triggered once - for one activation. And when you restart your PC, Windows will boot from your hard drive (as usual). If you need to run again Windows installation from a USB flash drive - call the Boot Menu again.

How do I open the Boot Menu? It's very simple - click at booting Windows one key. Which one? It depends on the:

BIOS versions;
motherboard;
laptop models.

That is, the situation is exactly the same as with BIOS. For example, to turn on the BIOS on a laptop, you had to press the Del or F2 button, and to open the Boot Menu, you had to click another.

Therefore, below we will consider how to launch Booth Menu on popular brands of laptops and personal computers.

Lenovo laptop owners shouldn't have any difficulties. After all, the Boot Menu on Lenovo is launched very simply - by pressing the F12 key when Windows starts up.

Plus, on the case of many models there is a special button with a curved arrow. You can click it if you want to select additional. download options.

Good to know: How to view the specifications of a laptop?

It is immediately worth noting here that there are Asus motherboards (installed on a PC) and laptops of this brand.

Run the Boot Menu on a computer with a mat. Asus board is as easy as shelling pears - you need to press the F8 key when it boots (at the same time when you usually enter the BIOS).

And there is a bit of confusion with Asus laptops. It seems that the manufacturer is the same, but there are several buttons to launch the Booth Menu. After all, the launch of the Boot Menu on Asus laptops is carried out using one of two keys:

Most often this is the Esc key, although it could be F8. However, there are only 2 keys, so you will quickly figure out which one is responsible for launching the Boot Menu on your laptop Asus.

Everyone should know this: How to hide a folder on the desktop?

Boot Menu on Acer is opened by pressing the F12 button. But there is one small nuance here. The fact is that usually the launch of the Boot Menu on Acer laptops is disabled. And when you press F12, nothing will happen. To make it work, you need to do the following:

Go into the BIOS (when booting the laptop, press the F2 button).
Go to the "Main" tab.
Look for the line "F12 Boot Menu" and change the value "Disabled" (disabled) to "Enabled" (enabled).
Save the changed parameters and exit the BIOS.

The system will reboot and you can go to the Boot Menu at Acer laptop with F12.

How to enable Booth Menu on Samsung laptops

To bring up the Boot Menu on Samsung, you need to press the Esc key. But Samsung laptop owners need to know one feature. The fact is that to call the Booth Menu, you need to click the Esc button once! If you double-click, the window will just close.

Therefore, you have to get used to knowing exactly when to press the Esc key. Although there is nothing complicated here - just a couple of attempts, and you will go to the Boot Menu at Samsung laptop.

This is interesting: How to make a shutdown shortcut?

How to enter Booth Menu on HP laptops

Launching the Boot Menu on HP also has its own specifics. After all, the opening of the Booth Menu is carried out in a slightly different way. To enter the Boot Menu on an HP laptop, you need:

When you turn on Windows, immediately press the Esc key.
The startup menu will be displayed - press the F9 button.
Ready.

After that, the Boot Menu of the HP laptop will open, and you can set the priority of turning on the devices (using the arrows).

All of the above methods allow you to run the Boot Menu on Windows 7. If Windows 8 or Windows 10 is installed on your PC or laptop, then you most likely will not be able to turn on the Boot Menu.

There are three ways to fix this:

Hold Shift when turning off your laptop or PC. After that, it will turn off normally (in the usual sense of the word). And then you can launch the Boot Menu on Windows 10 by pressing the desired key.
Instead of shutting down your PC, you can restart it. And at the moment of switching on, simply press the specific key corresponding to your brand of laptop or motherboard.
Disable Fast Startup. For this:

That's it - now you can easily enter the Boot Menu on Windows 10 or Windows 8.