Error "This Account already exists" when installing Windows Device Recovery Tool. When installing iTunes, the account already exists. How to make friends iTunes with Windows. We solve problems with installing an account already exists when you delete

Proper removal of the old 1C platform, recommended by the developers, is made through Applications OS Settings: Button Start - Control Settings ("Gears") - Applications.

Just delete the folder with the installed 1C platforms on the computer incorrectly. IN Windows registry Links to deleted programs that lead to errors working with programs, including the one we consider in this article.

However, even with the correct removal of the 1c platform, the error can still occur, albeit infrequently. Consider how to act in such cases.

When removing the 1C platform through the section Applications The message appears:

This error is not connected directly from 1C and occurs when removing perfectly different programs, not only 1c platforms.

The largest splash of this error was recorded when users go to Windows 10. It is after the update on Windows 10 when installing and removing some programs began to appear. Specified account already exists. And if when installing a new program it was possible, it was possible to remove the old, after all, to successfully install it, then when the circle is deleted, the circle closed: the program could not be removed due to the same error.

Causes of error

Exists great amount software For use on a computer. The installed programs can work perfectly on old versions of Windows, and after switching to new versions of Windows, it is sometimes necessary to finalize for new rules. In addition, the situation is not discussed when programs conflict with each other when installing on one system.

Therefore, the removal of old programs during the transition to new versions is the usual to users matter. With problems that occur at the same time, you need to be able to cope.

Buchspert8. I advises to use the device to eliminate the problems directly from the Windows Developer - microsoft. To correct errors when installing or removing programs.

Consider the following error tools:

Built-in component OS.

Step-by-step instructions for using the built-in OS component Troubleshooting Windows .

Step 1. On the menu Start Choose Parameters (Six icon).

Step 2. Click the tab Update and security .

Step 3. On the tab Troubleshooting view the list of errors that match the type of problem.

Directly from the page you can run the search for solutions to the problem.

Microsoft troubleshooting wizard

If you cannot solve the problem using the built-in OS component, install on the computer Master troubleshooting from Microsoft.

Step-by-step instruction launch Master troubleshooting and eliminate the problem.

Step 1. Navigate to the Windows Support page and eliminate microsoft problems Upon reference to troubleshooting problems that prevent installations or remove programs.

On the specified page you will find a program for automatic correction Errors, including damaged Windows registry sections that impede the installation or removal of programs on your computer.

Master troubleshooting Suitable for operating rooms windows systems 7, Windows 8.1, Windows 10.

Step 2. Download the troubleshooting program that prevents the installation or removal of the button Download .

Step 3. Launch Master troubleshooting and follow the steps of checking.

Step 4. To the question Master troubleshooting about the location of the problem, select item:

• Removal.

Step 5. In the list of programs, select TU when you delete which an error occurs.

Step 6. Launch automatic removal Programs and cleaning links to it in the Windows registry.

Wait for the completion of the work Wizard elimination of problems .

In most cases Master troubleshooting Perfectly copes with this error.

If the proposed tools did not help, the situation for the correction is better to transfer to those skilled in the art, they will find the reference to the reference to the program deleted and manually will deduct them. It is not recommended that this work is not recommended, there is a risk of violating the operation of the OS with non-professional data adjustment.

Helped the article?

Get a secret bonus and full access to the Bucheshpert8 reference system for 14 days free

. Yesterday, at last, with the help of the installer, I updated its eight on all machines to the new-fashioned dozen. However, encountered one problem is essential.

The fact is that the program Classic Shell.which returns a more convenient view of the Start menu suddenly refused to work, while trying to reinstall it, the error "The specified account already exists" began to appear. The same message appeared and when trying to remove it.

After long dance with the tambourine, the same as in the case of an error, I suddenly found a simple solution.

Solution to the problem

So, if you have a channel to watch a video, then you can steps after me to fix the problem "The specified account already exists".

If you have a weak Internet, then what needs to be done:

1. We delete the folder with the program installed, for this we go to C: \\ Program Files If there is no our ill-fated program, then Czech in C: \\ Program Files (x86).
2. We open, go to section Important registry sections, in the upper part We enter the name of the program in the search window, then we go through all tabs, and if any entries appear - we delete.

Attention!!! Do not delete unnecessary, just what refers to the program.

1. Go to the "Registry Cleaning" section and produce troubleshooting problems that later eliminate in automatic mode.

Rejoice in the working installer or remote program. The error "The specified account already exists" you will not be disturbed.

Subscribe to My Channel on YouTube! You are waiting for many more useful videos!

To completely delete the program 1c enterprise of any version from a computer, I advise you to first delete the information database. Although if you know exactly where the database is located, the order does not matter.

Delete information database 1c enterprise

Immediately make a reservation that this article discusses the deletion of only a file variant of the database. If the server database, you need to contact the server administrator.

To determine where the database is located, you need to run the 1C program. After starting, this window will appear with the list of your information bases:

Below is the path to the database directory (I highlighted the string with a red rectangle). Here is the directory and you need to remove with hard disk (Only the last directory in this path, in my example it is "temp", which is located in the 1C database catalog).

Get 267 video tutorials for 1C for free:

Open the "Explorer" and we are looking for a catalog we need:

Click on it right mouse button and select "Delete".

Also we do with other information bases.

In case the database is on another computer (the path will have something like this: "File \u003d \\\\ AlexPC \\ 1C \\ temp"), it is better to go to that computer and remove there. If knowledge allows you to try to delete and from this computer.

Removing platform 1c enterprise

The 1C platform: "Enterprise" is deleted as well as a regular program through the "control panel".

We go to the "control panel". Depending on the version Windows panel You can find by clicking either right or left mouse button on the "Start" button. On Windows 10 you need to click right-click:

. Yesterday, at last, with the help of the installer, I updated its eight on all machines to the new-fashioned dozen. However, encountered one problem is essential.

The fact is that the Classic Shell program, which returns a more convenient view of the Start menu suddenly refused to work, while trying to reinstall it, the error "said account already exists" began to appear. The same message appeared and when trying to remove it.

After long dance with the tambourine, the same as in the case of an error, I suddenly found a simple solution.

Solution to the problem

So, if you have a channel to watch a video, then you can steps after me to fix the problem "The specified account already exists".

If you have a weak Internet, then what needs to be done:

1. We delete the folder with the program installed, for this we go to C: \\ Program Files If there is no our ill-fated program, then Czech in C: \\ Program Files (x86).
2. We open, go to section Important registry sections, in the upper part We enter the name of the program in the search window, then we go through all tabs, and if any entries appear - we delete.

Attention!!! Do not delete unnecessary, just what refers to the program.

1. Go to the "Registry Cleaning" section and search for problems that then eliminate automatic mode.

Rejoice in the working installer or remote program. The error "The specified account already exists" you will not be disturbed.

Subscribe to My Channel on YouTube! You are waiting for many more useful videos!

The WIX package executes from the package displays "Error 1316: The specified account already exists" during the update. How does the Windows installation program displays this error code? I'm afraid there is no documentation about it.

Earlier, we released a product consisting of one MSI package, and now we are preparing an update consisting of a WIX package containing a new version of this MSI package. The product code and the file name between the MSI source package and the update have not changed.

Change The MSI package does not yet support the update. When the user needs to be updated (when it is a serious update, a slight update or a small update), it must first manually delete the previous package ...

Editing 2: I simply deleted links to the use of extension to compile, and the installation program seems to work normally ... I still need to fully test it.

The MSI update requires MSI to have a new ProductCode, the ProductVersion increase (in the first three fields) and the same upgradecode. Therefore, it's not clear to me that you actually receive an update, depending on what you drink. It can not fulfill the update, because you have the same productcode. (To perform the appropriate update, you need a MAJORUPGRADE element in MSI). Therefore, there are some doubts about whether you will receive an actual full update. If you intend to replace the established MSI Full Upgrade and a higher versionable product, use the MajorUpgrade function.

Therefore, Burn can decide to update on the spot, reinstalling mSI file (And it is rather as a patch than a update), and it is relevant, because you do not say if you have any user actions or Wix use functions (they are still user actions) that create a user account. If you do this, then the most likely cause of your error is that Burn reinstalled the new MSI as an update, reinstalling the MSI file, and some user actions are simply running again, and yes, this user still exists, because there was no actual removal that will delete it. Or your MSI ProductVersion is the same, and you have maintenance mode repair, so the user action will start again.

I would receive a detailed update log to find out exactly what is happening.

There are a lot of guess, because you say you want updates, but your MSI is not created for the actual update, and you do not say if you have a WIX that uses the user to create a user account. You also do not say if you have increased your new MSI product issuing, so again it leads to additional guessings as to what Burn can do. In a detailed log, it will be indicated whether this is a problem of a user action or something else that update (if it is), which you do.

I had the same problem, and since Win10 does not allow you to run a Fixit tool from the Internet, I made the following hacking to remove ASUS Smart Gesture on my windows laptop 10.

1. You need to fake the site MS, thinking that your computer is not Win10. I installed the Chrome add-in, which allowed me to change the custom chrome browser agent to think that I am IE9 and the previous version of Windows: Mozilla / 5.0 (compatible; MSIE 9.0; Windows NT 6.1; Trident / 5.0)

2. This allows you to see the Fixit button and download the portable version of the tool (in case you need to use it for the entrepreneurs)

3. Download and remove the downloads to the folder with the FixItp name to my library.

4. If I launch EXE directly, I get some unpleasant script error. What I did to get around this is to go to the "Resources" folder, and then in the Troubleshooting folder.

5. I launched Program_install_and_uninstall.diagcab, which launched and allowed me to successfully remove the ASUS SmartGesture program.

6. Then I installed a new version of ASUS SMART GESTURE from my site.

I suspect any installed applicationwhich you cannot delete can be allowed by the same process - just not running anything included.

PowerShell must be installed for the script. This program It comes complete with all modern Windows systems, but in WindowsXP will have to install PowerShell separately.

All script operation options can be set by editing the file, and you can pass as values \u200b\u200bof the corresponding keys. Let's look at what keys are available and what values \u200b\u200bthey need to transmit.

"DD" key (from Distribution Directory) accepts any path windows format. Ways of the type "C: \\ Windows" or "\\\\ Server \\ 1CDistr". On the specified path, the 1C platform distributions should be located, and each of the distributions should be in its folder with the version number or with the version number and the 1C enterprise platform bottle, such as "8.3.5.1111" or "8.3.9.1818-32" or "8.3.9.1818 -64. " Bitness sutiks need to be used if computers exist on the same network operating systems Different visits and you want to put a 64-bit platform on the 64-bit system. The specified folder, and all subfolders with platform distributions, should be read for reading the user, on behalf of which the script will work.

The "DL" key (from Directory Logs), similar to the key "DD", accepts any Windows Format path. This folder will record the logging logs of the script. File names with logs match the computer name and add each time the script is launched. The specified folder must be available for recording to the user, on behalf of which the script will work. If the specified path is not available or not the write option, all the actions of the script will be written to the 1C8InstalAndunInstall.log file, located in the local user folder (approximate path "C: \\ users \\ vasa \\ appdata \\ local \\").

The "IP" key (from Install Parameters) is responsible for the installation parameters when the script is running. The key can take one of the following values:

• "NO" - not to install
• "Last" - set the last platform from those found in the distribution folder
• "8.3.5.1111" - the version number of a specific platform that will be necessary

The "DP" key (from Delet Parameters) is responsible for the removal parameters when the script is running. The key can take one of the following values:

• "NO" - do not remove
• "AEL" (from the All Expt Last) - delete all platforms found on the computer, which coincide with all the platforms found in the distribution folder, except the last platform. Important! This key will delete only those platforms whose versions in a folder with platform distributions if some version is installed on the computer, but it is not in the distribution folder, it will not be deleted.
• "8.3.5.1111" - the version number of a specific platform you want to delete
• "All" - Delete all versions of the 1C platform on your computer. This value is overwhelming and extensive. Overwhelming, because, for the script operation, with this value, you must pass the path to record logs, and you can not even pass it, all the values \u200b\u200bof the other keys will be ignored. Extensive, because, all products will be removed on the computer at least ghostly resembling 1C platform.

The "iod" key (from Installation Options Distribution) is responsible for the components of the 1C platform, which will be installed. The key must be transferred to the value of the type "designellclients \u003d 1 thinClient \u003d 1 thinClientFile \u003d 1", in which you can change 1 to 0 or back depending on which parts of the platform you want to install. If a this key Provide any other value that does not like the string above is set to install all components for system operation in client mode.

• "DesigneRallClients" - the main client and configurator
• "ThinClient" - a thin client for a client-server version of work
• "ThinClientFile" - a subtle client with the possibility of working with file information bases

How to install, update or delete 1C platform if you have a lot of computers, run to each laziness, but there is no domain?

Bad news: you have to run, and configure on each computer execution of task scheduler

Good news: it should be done only once.

To begin with, we will prepare:

1. Create 2 public folders, one with reading rights for everyone, and the other with the rights to write for all. Be sure to create 2 independent folder, otherwise everything can end very badly.
2. In the folder with "read-only for all" rights folders, put the distribution folders, each of the folders should be called the number of the distribution version, which is located in it. Here we put the script and the BAT file that runs the script.

Small retreat! Why do we need a BAT file to run a PowerShell script? Because using BAT file we kill two hares:

• By default, the Windows system prohibits the launch of any PowerShell script from security considerations, so the BAT file will first allow the script start, and after its work again prohibit.
• In the BAT file, you can change the script start settings, without editing the script file itself by changing the default values \u200b\u200binstalled in it.

Now let's start tune local computers users. In the absence of a domain it is assumed that all users work under local accounts with "Users", and administrative actions have accounts with administrators.

How to install, update or remove 1c platform if there is a domain?

Everything is easier nowhere

Note

• The script performance is verified in the following systems: Windows 7 (x86, x64), Windows 8.1 (x86, x64), Windows 10 (x86, x64) with all mandatory and not binding updates for 2016-11-10.
• If you are not satisfied with the delay when the script is triggered in the domain, then you need to set the "Configure Logon Script Delay" parameter in "0". The parameter can be found: Computer Configuration\u003e Administrative Templates\u003e System\u003e Group Policy\u003e Configure Logon Script Delay (Computer Configuration\u003e Politics\u003e Administrative Templates\u003e System\u003e Group Policy\u003e Configure Login Script Delay). Thank you very much for this information.

upd: 2015-12-07

1. Fully rewritten a way to circumvent directories with a platform. It was most complaints to this part of the code, not all this part was worked out, and some worked incorrectly. Now everything works correctly, because Only the most simple designs are used to bypass distribution directories.
2. Fully rewritten part of the search for the last (senior) distribution in the Distribution folders. Now this is a normal clear code, and not the horror that was previously.
3. The part of the code was changed between them, now the script is trying first to put the platform, and then everything else.
4. Many different checks have been addressed to avoid strange behavior or unnecessary attempts to install the platform. In the log file now more information about the work of the script.

upd: 2016-11-21

1. Changed the logic of the script work. Now the platform installation is checked and in the absence of a platform installed on the client computer, the script stops work.
2. Added functionality that allows you to install a 64-bit platform on 64-bit systems on the network with computers with different visits. For the operation of this functionality, the folder with platforms should be the view "H.kh.kh.kh-32" and "H.kh.kh-64".

When installing new and removal of old 1c platforms, a situation may occur that prevents the execution of these operations. After reading the article, you will learn how to correct the error "The specified account already exists", which occurs when removing the 1C platform.

How to remove 1c platform

Proper removal of the old 1C platform, recommended by the developers, is made through Applications

OS Settings: Button Start - Control Settings ("Gears") - Applications
.

Just delete the folder with the installed 1C platforms on the computer incorrectly. The Windows registry remains links to removable programs that lead to errors working with programs, including the one we consider in this article.

However, even with the correct removal of the 1c platform, the error can still occur, albeit infrequently. Consider how to act in such cases.

When removing the 1C platform through the section Applications

The message appears:

• 
  .

This error is not directly related directly from 1C and occurs when removing completely different programs, not only 1c platforms.

The largest splash of this error was recorded when users go to Windows 10. It is after the update on Windows 10 when installing and removing some programs began to appear. The specified account already exists
. And if when installing a new program it was possible, it was possible to remove the old, after all, to successfully install it, then when the circle is deleted, the circle closed: the program could not be removed due to the same error.

Causes of error

There is a huge amount of software for use on a computer. The installed programs can work perfectly on old versions of Windows, and after switching to new versions of Windows, it is sometimes necessary to finalize for new rules. In addition, the situation is not discussed when programs conflict with each other when installing on one system.

Therefore, the removal of old programs during the transition to new versions is the usual to users matter. With problems that occur at the same time, you need to be able to cope.

Buchspert8.
Advises to use the troubleshooting agent directly from the Microsoft software developer to correct errors when installing or removing programs.

Consider the following error tools:

• built-in Windows Troubleshooting component;
• Microsoft troubleshooting wizard.

Built-in component OS.

Step-by-step instructions for using the built-in OS component Troubleshooting Windows

.

Step 1. On the menu Start

Choose Parameters

(Six icon).

Step 2. Click the tab Update and security

.

Step 3. On the tab Troubleshooting

View the list of errors that match the type of problem.

Directly from the page you can run the search for solutions to the problem.

Microsoft troubleshooting wizard

If you cannot solve the problem using the built-in OS component, install on the computer Master troubleshooting

from Microsoft.

Step-by-step instruction launch Master troubleshooting

and eliminate the problem.

Step 1. Navigate to the Windows Support page and troubleshoot Microsoft's problems using the Troubleshooting problems that prevent installations or remove programs.

On the specified page, you will find a program to automatically correct errors, including the damaged Windows registry sections that prevent installation or remove programs on your computer.

Master troubleshooting

Suitable for Windows 7 operating systems, Windows 8.1, Windows 10.

Step 2. Download the troubleshooting program that prevents the installation or removal of the button Download

.

Step 3. Launch Master troubleshooting

And follow the steps of checking.

Step 4. To the question Master troubleshooting

About the location of the problem, select item:

• Removal
  .

Step 5. In the list of programs, select TU when you delete which an error occurs.

Step 6. Run the automatic removal of the program and clean the links to it in the Windows registry.

Wait for the completion of the work Wizard elimination of problems

.

In most cases Master troubleshooting

Perfectly copes with this error.

If the proposed tools did not help, the situation for the correction is better to transfer to those skilled in the art, they will find the reference to the reference to the program deleted and manually will deduct them. It is not recommended that this work is not recommended, there is a risk of violating the operation of the OS with non-professional data adjustment.

See also:

• Installation is prohibited based on 1C 8.3 system policy.
• Detected unlawful use of this software Product in 1c: how to remove
• Pin input error. Pincode is not equipped in 1C 8.3
• Printing form is not available 1C 8.3 when calling an external printed form
• The records of the information register have become unreasonable when updating 1C

If you are not yet a subscriber of the BukSpert8 system:

After making a subscription, all materials for 1C Accounting, the records of supporting esters will be available and you can ask any questions on
1C.

Helped the article? Get another secret bonus and full access to the Bukwekpert8 reference system for 14 days free

sQL-Server - How to resolve the "specified account already exists" when installing SQL Server 2008 R2

I recently had a problem when installing Visual Studio 2012 and SQL Server 2008 R2 to a new development machine. My sequence of installation was Visual Studio 2012, then install SQL Server 2008 R2.

An error occurred in the middle of the SQL Server installation:

The specified account already exists.

I spent my day trying to correct this problem.

original

3
Answer

First search the installation log. In my case it was the next way:

C: PROGRAM FILESMICROSOFT SQL Server100Setup BootStrapleg *. *

In this journal I found the following entries:

2015-08-07 11:16:50 SLP: SCO: Attempting to Open Registry 2015-08-08 11:16:50 SLP: SCO: Attempting to Open Registry Subkey SoftwaremicrosoftvisualStudio9.0 2015-08-07 11:16: 50 SLP: SCO: Attempting to Get Registry Value Installdir 2015-08-07 11:16:50 SLP: Target Package: "D: Shared ~~~~~ sqlncli.msi" 2015-08-07 11:16:51 SLP : MSI Error: 1316 The Specified Account Already Exists.

Then I found the sqlncli.msi file
and opened the command line to execute this command:

Msiexec / i "D:

Then I deleted your own SQL Server client and again executed the installation for SQL Server.

Regarding where it is indicated that the reason is its own SQL client - the error actually arises when trying to install more new client SQL. The solution looks like: Go to "Installing and Deleting Programs", and then delete the old SQL client and try again. No need to interrupt the installation.

After the old Native Client client has been removed, the installation seems to flow without any problems.

For completeness: It also happens when the MSI source package has a different name.

If you installed myProductv1.msi, and then tried to update it using

Msiexec / Fvomus MyProductv1.msi

works as expected. But when used

Msiexec / Fvomus MyProductv3.MSi

he does not cope with specified error. Assuming that only the name of the file changes. Content (especially all guids) remains the same

25.07.2019

On your computer is not installed iTunes, and you can't start working with your Apple gadgets? Do not despair - we will help you in solving this problem. There are many reasons for errors when installing, so we will try to consider all options and offer you to familiarize yourself with detailed error removal instructions.

Get rid of problems with the wrong version

First you need to figure out where you have taken a distribution program. If you gave you a friend or you downloaded it from some "left" resource, delete it and go to the Apple official website where you can download a well-good and working distribution.

A situation is also possible when the version of the program is incompatible with your operating system. For example, for Windows 7, Windows 8 and Windows 10 is suitable for any version. As for Windows XP and Windows Vista operating systems, the last version for them is 12.1.3.

There is also special version of iTunes. 12.1.3 For the 64-sided version of Windows Vista - all these distributions you can download on the official Apple website. It is best to take advantage of the automatic form that will determine the version of the OS you use and the suits the suitable distribution itself.

Get rid of computer problems

After that, reboot and re-run the installation procedure. What other problems can take a user who does not install Aytyuns? If the installer swings to the service Windows InstallerYou must start the service through the Management Panel - Administration - Service.

You may also need to update the Windows Installer service - the corresponding package is downloaded from the official website of Microsoft. Install the package, reboot and run re-installation. The following problem may be insufficient to install rights.

If you do not install iTunes, click on the Right-click distribution and start the installation with the administrator rights - as a rule, this procedure helps in many cases. If necessary, the system will require to enter the administrator password - this happens if a password is installed on the admin account.

Software installation problem apple companies Microsoft's operating systems are always relevant. Such a nuisance has not passed and popular program iTunes.

Why problems arise with iTunes:

• Incorrect installation of the application itself, single installation errors
• Incorrect Windows configuration
• Conflict with antivirus or other installed applications

Below we will look at all the factors and you will always be aware of what to do if iTunes is not installed.

First of all, you need to make sure that the distribution is relevant. The latest version of iTunes must be downloaded from the official website of the "apple" company. In the case of using an outsider distribution, the program file may not be only obsolete, but also infected with the virus.

You need to install iTunes only with computer administrator rights. Therefore, it is necessary in the context menu of the installation file to use the "Run on the administrator" item.

Restore the previously installed version

In some situations, after an error occurred when installing, you can try to re-restore the program's performance. To do this, re-run the ITunes distribution and select "Restore" in the installation menu (You also need to start with administrator rights).

Setting up windows

Step 1. Setting the latest updates

The availability of updates is checked in the Windows Update Center by pressing the "Check Updates" button. It is in the "System and Security" group on the "Control Panel". If you have unspecified updates, click "Install Updates". To apply update results, you need a mandatory system reboot.

Step 2. Disable Windows Firewall

Built-in firewall can also affect the installation of iTunes. To avoid unnecessary problems, it is better to disable it. The Windows Firewall item is similar to the Windows Update Center. Next, in the left menu, select "Enable and disable Windows Firewall" and set the marks to all items where there is a "disable Windows Firewall".

Step 3. Checking Hosts File

Hosts may suffer as a result of various malicious software. It is located at: " C: \\ Windows \\ System32 \\ DRIVERS \\ ETC". To open hosts, you can use notepad or any other available.

Here you need to make sure that the only string that is not marked with the "#" symbol on the left, is the record: " 127.0.0.1 Localhost.". If there are additional records in the list, you need to delete them or comment on, attributing the "#" symbol left. Next, we close hosts and save all the changes made.

Conflicts with software

Search for possible conflicts with other installed programs - a difficult task. There is a huge number of programs, and it is impossible to allocate all the problems with them.

Why are such conflicts possible? Each software developer in its own way comes to its implementation. Programs can affect system filesThereby interfering to work with other applications.

Basic sources of conflict

The most likely cause of errors can be the operation of antivirus. Therefore, it also needs to try to disconnect.

Something strange, but often conflicts with another, previously installed, Apple software. Therefore, we find the item "Programs and Components" in the "Programs" section on the "Control Panel" and sort the list installed programs According to the "Publisher" column. We delete all applications that the Apple Inc publisher.

If nothing helped

If nothing helped and the problem was never solved, it remains only to contact technical support Apple companies. This can be done on the Apple.com website. Any installation questions can be set in its "Support" section.

Greetings, blog readers.

Many users for one reason or another have to enjoy special program from Apple - iTunes. Especially this question is relevant for the owners of iPod music players and smartphones iPhone.. The fact is that this application allows you to transfer files to the device and back. Of course, there are other solutions, but ultimately they use the drivers of the program indicated above. But due to the fact that the solution is placed in the competing operating system, often when installing iTunes gives an error. This may be associated with different problems. In the article Next, I will try to disassemble the main points, because of which users cannot accommodate the desired application in the system.

During the installation of the program you need to the computer often appears a message: "". In addition, the text states that it is impossible to run the application you need to complete, and for help it will be better to turn to technical personnel.

Of course, if you do not know the exact solution, eliminate the problem here is so easy. Fortunately, there is a way out:

This should help with a problem.

MS VC ++.()

Sometimes a disease is associated with the work of such a component as Visual C ++.. Usually it is accompanied by a message in which it is mentioned " Microsoft.vc80.crt.».
Do not immediately get upset. Download from the official page update Microsoft Visual C ++ 2005 SP1 And install it. Next, we go here and place an update. This should solve the situation. If not, it is worth contacting Microsoft official support.

Installer()

Sometimes problems are associated with the service. As a result, not only iTunes is installed, but also any applications.

To solve the situation, we perform several movements:

Everything should earn.

The service is restarted here Apple Mobile Device. If there are some problems with it. This ailment occurs not only when installing the assembly component, but also with the usual start of the program.

()

Sometimes, when users set a new application on their device, a message may appear if " the program is not Win32».

Immediately it is worth saying that the problem is not related to the system's bit.

This often appears when the project is intended at all for another operating system. Or he just has an inappropriate complete set.

The solution consists of several stages:

Different errors()

In general, while installing iTunes on a computer with Windows 10 or any other version, may appear different problems. All of them are associated with the same reason. But depending on other components, various codes appear. For example, it can be 2503 and 2502. In addition, it is often occasionally found, with code 2932. In some cases, the type of problem has a different appearance. So, for example, a window appears before users, where it is said that the procedure cannot be continued due to Windows Error 127..

In general, everything may appear as a result of various problems:

Damage to records in the registry associated with iTunes.

Malicious software (especially often is accompanied by an error 2503).

Another program independently deleted the necessary files.

To prevent the emergence of problems in the future, it is important to eliminate all possible factors:

Clean the registry from unnecessary records. This can be done with the help of various programs that I have already mentioned earlier.

Scan the system for viruses.

Update drivers. I also told about it before. Especially this item is relevant if a warning message appears with the code 0xc000007b..

Install Windows updates.

If nothing of the above helps, it is possible to solve the Microsoft VC80 assembly problem and many others will work only the net location of the operating system.

Rare cases()

Sometimes users can meet with a message in which it is not said.

You can easily fix it - just download and install an update for a universal environment C. You can download it here. It should help in the case when a window appears with a message: " Unable to register a module».

It is worth noting that it is better to perform all actions on behalf of the administrator.

In some cases, there may be a parable and sign, where the following says: " Your system has not been changed" This often happens when users had already installed the program and removed it, while some traces remained.

Solution Simple:

What does this procedure mean? Thus, you sorted up with all possible references to the Appendix. After that, it is best to clean the system to clearly with a special program.

As always, on the topic you can view a useful video:

I hope you will help you to cope with the problem. Subscribe and tell others.

So, you bought a new iOS-device and now need to install the iTunes program (ITYUNS) on the computer, without the help of which it will not even be tritely throwing music to the "apple". You download the program, run the installation and ... The system issues an error!

What to do and how to be in such a situation? In this article, we will tell why installing iTunes may not be launched and how to solve the problem.

The first reason for which iTunes may refuse to be installed - of course, a banal system failure. Eliminates such a failure simply - rebooting the computer. So yes, the first measure to eliminate ITUNES problems will be similar to the measures to combat any other system bugs - just perform a reset!

Correction of system settings

Another simple manual that can solve the setting problems is the system time adjustment. Many can surprise such a recommendation, but the fact remains a fact, often incorrectly established date / time on the PC cause serious bugs, including the iTunes failure.

Administrator rights

Reboot and adjusting system parameters did not allow proper results? Then moving on. Another popular reason why this or that utility is not installed on the PC - the user works through the guest account - to eliminate the problem, respectively, it will be necessary to log in via an account with administrator rights.

If you do not practice the division of accounts, then try to do the following - click on the iTunes file file with the right mouse click and in the drop-down menu select "Run from the administrator".

Locking protective programs

Installing iTunes still does not start? So it's time to engage in the adjustment of the security utility settings. The fact is that sometimes antivirus software and / or firewall work too responsibly, making in suspicious programs and those you trust by 100%, in particular iTunes. In order for security services to interfere with the installation, we recommend that they are generally disabled at the time until the procedure is performed.

Of course, you can not disable utilities, but simply make adjustments to the settings by adding iTunes to the list of trust programs, but sometimes this measure is not enough.

"Tails" of previous versions of iTunes

If iTunes and with disabled protection programs does not want to be installed, it is possible in other conflicts of software. In the event that you have ever been installed iTunes on a PC, and then incorrectly deleted the program, interfere new Installation May, let's say so "tails" of the former version.

To check whether the previous one is completely removed, download any annestiler, for example, Revo Uninstaller Install the program, run and look for the following "Tails" - iTunes, Quick Time, Bonjour, Apple Software. Update, Apple Mobile Device Support and Apple Application Support. All that will find from this list, delete, and then do not forget to retest the computer.

Update

Continuing the theme of conflicts to important to say that no renewable utilities can be caused. But if, after cleaning the "tailings", the iTunes installer still refuses to work on your computer, it's time to visit the Windows Update Center ("Start", "Center of Updates ...") and see if current unloaded updates - if any , Perform them all. Then be sure to restart the computer and try again to start the iTunes installer.

Error defining version

Installing is still interrupted by an error? Well, the causes and ways to solve the problem have not ended yet. The next lies in what. Sometimes the Apple program does not correctly define the Windows version, it is especially necessary to pay attention to this reason if iTunes is installed on Windows 10.

How is it usually downloaded to iTunes on a computer? The user should go to the official Apple website in a special section and start loading, at the time of the boot, the version of the platform installed on your computer will be determined and the corresponding version of the program will be built. If the version is defined not correctly, the iTunes installation will fail.

In the event that you suspect that you encountered this problem, try manually select the version you need on this page of Apple and install it.

Windows Installer errors

And finally, the latter of the most likely causes of iTunes installation errors are Windows Installer. Perhaps, for one reason or another, this service was accidentally disabled and to correct the situation, you will need to activate it. For this:

We hope that after this procedure, iTunes will definitely be attached to your PC.

Viruses

We started an article with a banal council - reboot, banal and finish - check the computer for viruses. What to do, no nobody canceled, and if it hostesses on your computer, then not installed iTunes. - Not the biggest problem that threatens you. So be sure to check the PC to viruses, previously convinced that you have a good and updated antivirus.

If nothing helps?

We believe that when carrying out one of the above measures, you will most likely make the iTunes installer work. If the specified manuals do not solve the problem, we recommend contacting Apple's support service - the company's specialists will help.

In many articles on the problem, ITunes is installed on Windows 10, 7, XP, etc., you can find the HOSTS Tip or correct the hosts file, as well as perform a number of other actions that are complex to understand the average user. As a result, an attempt to solve the problem can turn back big challenges. That is why we recommend contacting the support service, in this case, even if you have to do some complex actionsYou will work under the ready leadership of understanding people and everything will end successfully!

Ctrl + Enter..

In most cases, iTunes (ITYUNS) is installed on a computer without problems, but sometimes errors still happen. You can see such "scary" phrases like - "The installer has detected errors before the iTunes configuration", "An error occurred when installing the assembly component "," Happened unknown error"- And these are just the most famous installation errors.

However, with whatever mistake, you do not encounter to be afraid, even if you do not understand at all, in which this very error is. Just follow the recommendations of this article, and you will get to fix everything.

Let's start with the simplest recommendation - rebooting the computer. Despite the banquality of this council, it often turns out to be effective, and in combating not only with errors of iTunes of a different nature, but also with any other software failure. So confidently press the reset with the hope of luck, and the problem will solve this that is elegant and in a simple way.

Login to an account with administrator rights

Reboot did not help? Well, then we begin to study the problem more detailed. The first thing you have to do is to check how the account is posted, under which you work at the computer.

Usually the right to install programs is provided only to an account with administrator rights, so if you work in a guest accounting, wonder what iTunes refuses to be installed not worth it, any other program from the guest account will not be established either.

By the way, this cause of iTunes installation errors is popular when the user tries to install the program on the working computer without having administrator rights. If the computer is home, then, most likely, you will work on behalf of the administrator. And, nevertheless, we recommend that you make sure of this:

At work computers, it is often an option to endow the administrator's rights to the administrator's rights. In this case, try to do the following - click the iTunes installation file with the right mouse button and in the dropping window to select "Run from the administrator".

If you will also be waiting for failure, refer to system administrator or bosses and ask to give you rights to install the program. Just be prepared to explain to the authorities, why do you need iTunes during working hours.

Computer update on computer

If you are all right with rights, and iTunes refuses to establish, a problem is possible in conflicts that are most often due to the presence of non-updated programs on PC. So that the next step Error corrections are downloading current updates. If you have Mac, go to App Store. , Tap "Updates" and download all topical. If you have Windows, call the Start menu, then the Windows Update Center, start checking, and then download the received updates.

PC compatibility check and iTunes version

One more possible reason Software conflict - an unsuitable version of iTunes. If you drive in any popular search engine "Download iTunes" phrase, then the first link will send you to Apple's official website, on a page where the most up-to-date version of this program is posted. However, if Windows XP or Windows Vista, and also a 32-bit system, the most relevant version will not suit you. For users of the above versions of Windows, Apple has created special versions of iTunes, and you can download them.

We emphasize the minimum system requirements for the most actual version iTunes - 64-bit system, windows platform 7 and higher.

Disable protective programs

List software conflicts Not yet completed - another one - the ban on the installation of iTunes utilities. If you have installed antivirus programs Or turned on firewall - they can perform their work too hard, blocking and malicious software, and no. iTunes for one reason or another can get into the "black" list. To check if it is, the easiest way to disable the security utility during the installation time of the program.

However, if you are afraid to disable the protective services completely, touch up their settings and transfer iTunes to the list of trusted programs.

Cleaning "Tail" past installations iTunes

Well, finally, the last cause of software conflicts is the components of past iTunes settings. If you have already installed iTunes on the computer, with which you are still experiencing problems, then, most likely, you simply removed incorrect previous version. In this case, the best option is to download an uninstaller, for example, Revo Uninstaller and find in it the following components - Apple Application Support, Apple Mobile Device Support, Apple Software Update, Bonjour, QuickTime - All this "tailings" iTunes, if some of the components Will be detected, delete it using the program.

After removing Apple. Software Update, this component will be required to re-establish. In general, in theory, when installing iTunes, this element must be installed automatically as a program component, but after it is removed manually problems occur, so it's better to install it yourself:

Ready! Now you can try to install iTunes, but you need to start the installation, again, not using the iTunes.exe file, and through iTunes.msi, which is located in the "folder" .zip.

Activation of Windows services

Well, finally, another reason standing separately from the software conflicts, according to which iTunes, persistently issuing an error, does not want to be installed - this is a problem with Windows services - "Windows Installer" and "Windows Module Installer". As a rule, the problem is that one and these services for one reason or another is disabled. To eliminate the service error, you must include:

Suitable

Well, now you know why there may be a mistake of a particular nature when installing the iTunes program, and how to eliminate it. We hope specified in the article ways helped you. If the program score refuses to be installed, we recommend contacting Apple Support.

If you have found a mistake, please select the text fragment and click Ctrl + Enter..

When installing or updating iTunes pops up windows Installer error when installing iTunes? Here we will list common mistakes When installing iTunes, as well as the corresponding solutions to the problem.

Windows Installer package error

You can get one of the following error messages when updating or installing iTunes for Windows:

"There is a problem with this package. windows Installer. The program to complete and install cannot be started. Contact your support service or package provider. "

"There is a problem with this Windows Installer Package. The program works as part of the installation not finish, as expected. Contact your support service or package provider. "

This iTunes installation error is not strange for some users who came across iTunes errors when installing Windows operating system

Most frequent cause Errors is an outdated or incompatible version. Apple Software Update. on PC. To resolve this problem, follow these steps.

1. Open the removal of programs from the Windows Control Panel.
2. Right-click on Apple Software Update, Select Repair from the context menu.
3. Follow the on-screen directions to complete the recovery process.
4. Update Windows software restart, now you can install ITunes 12.6 no mistakes.

ITunes 7 Error (Windows Error 193) When you try to install iTunes for Windows.

"I take Windows 7 64-bit. Every time I try to install iTune I get an error 7 ( Windows, error 193) After completion (and also pop up, which says "ITunes Assistant was not installed"). During the installation process, I get a message that apple service Mobile Device failed to run. To which I choose to "ignore"

This is another error message that occurs during the iTunes installation. You can follow the steps to eliminate this error.

Note: The following steps are applicable only when the message contains an error 193But not another Windows error code.

1. Go to C: \\ Windows \\ System32

2. Find the following files and delete them to the basket.

msvcp100.dll
msvcp120.dll
msvcp140.dl
MSVCR100.DLL
msvcr120.dll
vcruntime140.dll

Make sure that the file names that you drag into the garbage basket correspond to the above exactly. If you can not find the file, skip and go to the next file. Any other files should not be deleted from this folder.

3. After you drag these basket files, go and perform repairs on both installed versions Apple application support (64 and 32 bits) in the Add / Remove Programs list in the control panel. ITunes requires both 64 and 32-bit support versions apple applications.

• Click Companies Apple Application Support 32-bit.
• Right-click Apple Application Support, 32-bit and select Restore from the context menu to complete the restore wizard.
• Perform the two steps described above to support Apple Application 64-bit.

4. Run iTunes. If iTunes does not start, and you will see an error message 7 () again, you must reinstall iTunes again.

• Fully remove iTunes and associated software components from your computer.
• Go to the iTunes download page and install iTunes from scratch.

ITunes will not install with an Error "Applic Application Support WAS NOT Found / Apple Application Support, was not found."

If iTunes does not install on Windows 10 / 8.1 / 8/7 with an error " Apple Application Support Was Not Found / Apple Application Support, was not found ( Windows Error 2. / windows error 2) "You can fix this problem by deleting all Apple components and reinstall iTunes.

Here may be the answer: https://support.apple.com/ru-ru/ht201668

On your computer is not installed iTunes, and you can't start working with your Apple gadgets? Do not despair - we will help you in solving this problem. There are many reasons for errors when installing, so we will try to consider all the options and offer you to familiarize yourself with the elimination of errors.

First you need to figure out where you have taken a distribution program. If you gave you a friend or you downloaded it from some "left" resource, delete it and go to the Apple official website where you can download a well-good and working distribution. A situation is also possible when the version of the program is incompatible with your operating system. For example, for Windows 7, Windows 8 and Windows 10 is suitable for any version.

As for Windows XP and Windows Vista operating systems, the last version for them is 12.1.3. There is also a special version of iTunes 12.1.3 for the 64-sided version of Windows Vista - all these distributions you can download on the official Apple website. It is best to take advantage of the automatic form that will determine the version of the OS you use and the suits the suitable distribution itself.

Next, the case of technology is to download the distribution and try to install it. If your computer works under windows control Vista, do not forget to start the installer on behalf of the administrator. We can also advise you to change the "curve" by Vista on Windows 7 or more modern Windows 10.

You do not install iTunes, and you can't find the cause of what is happening in any way? Then we recommend that you follow these steps:

• Clean the computer from the accumulated garbage with the help of special utilities;
• Perform cleaning the system registry with using CCleaner (or with the help of any other well-known utility);
• Install all the latest Windows updates.

After that, reboot and re-run the installation procedure.

What other problems can take a user who does not install Aytyuns? If the installer swings to the Windows Installer service, you must start the service through the "Control Panel - Administration - Service". You may also need to update the Windows Installer service - the corresponding package is downloaded from the official website of Microsoft. Install the package, reboot and run re-installation.

The following problem may be insufficient to install rights. If you do not install iTunes, click on the Right-click distribution and start the installation with the administrator rights - as a rule, this procedure helps in many cases. If necessary, the system will require to enter the administrator password - this happens if a password is installed on the admin account.

What if all updates are installed, the garbage is deleted, the Windows Installer service works, the installation is started under the administrator's rights, and the installation does not start? Why isn't Iythuns installed on a computer? The problem may wage in the conflict of applications - try to disable firewalls and antivirus programs that block any ports, discs and the possibility of normal installation of software.

If your operating system literally tends to errors, slows down and slowly loads, do not puzzled by questions and actions, and follow the usual reinstalling Windows.

The iTunes media player easily interacts with any modern operating systems - even a long-standing and officially unsupported Microsoft "XP" is still able to open Apple's software and throw music, movies and other information on smartphones, tablets and players with iOS.

Perfectly things with iTunes are on the more modern OS - especially on the "eight" and "dozen". But the famous "seven", still being a real "benchmark", the media player digested with difficulty, and often with errors. Why? What problems appear most often and how to avoid problems and failures - in the instructions below!

Possible causes and ways to solve them

Lack of access rights, failure in the work of connected libraries, temporary or constant shutdown of the necessary services, serious viral activity - on the official website of Apple listed some inconceivable number possible problemsarising from the immediate installation of iTunes. The list is replenished almost every month, but mostly deal with the following reasons if iTunes is not installed on Windows 7:

Access level

In addition, it is necessary to start installing the program on behalf of the "admin" (that is, not double-clicking, but using the right mouse button and drop-down menu). Next will continue to agree with the pop-up notification and start installation.

Viruses, Spies, Trojans and Other Pest

It is not necessary to keep the antivirus all the time in the system (especially if the PC and without constant background load hardly copes with tasks), but at least occasionally check system disks and rAM - need to. The "perfect" disposable search with ease takes the following tools -, and - each listed assistant is available for free and, in general, it offers, both similar functionality and the same procedure.

Namely - all the necessary files are loaded and unpackled. Then caused graphic interface And the immediate check of each separate plot Systems - a procedure, as a rule, takes 5-10 minutes, and then ends with direct summing up, creating a recovery point and reboot.

As a result - unnecessary, and viruses threatening performance are removed, you can re-start interaction with Iytyuns.

Problems with antivirus

Sometimes "Defenders" windows see in harmless, and downloaded from official sources "Dangerous" software, and therefore block launched distributions (including iTunes). The best way To deal with the problem - to temporarily disable all the protective protocols of the antivirus (any - at least Avast!, at least Kaspersky). Sometimes you need to go even further and cut out even a firewall built into Windows. Apple's official site can be trusted!

Problems with the system

The described subsection should be immediately divided into several parts.

First of all, it is worth dealing with plug-in libraries on a computer, software components, and additional graphic instruments. And further - exactly on the list. Immediately it is worth loading, and quickly run through the installation process. By the way, it is advisable to download 64-bit, and a 32-bit version - for unknown reasons, but this is how Windows immediately comes to the "normal".

Any version will suit (if necessary, you can buy paid, additional features) - the main thing to check the OS for the presence of missing drivers. In general, the procedure takes 5-7 minutes, and even the press buttons do not have to have - everything will occur in semi-automatic mode, it is enough to agree to create a "recovery point" and on download file required (if traffic is limited, it is worth thinking!).

And the last, but no less important barcode. Check file System For incompatibility between components installed by drivers and services. Check is carried out so - first called command line The Ctrl + R keys combination, then the "SFC / SCANNOW" phrase appears in the text field.

Check takes no more than ten seconds. After the operation is completed - the mandatory reboot.

Incorrect removal of the last version of iTunes

In front of the "clean" installation of the media player from Apple it is important to deal with the files remaining in the system, additional ones related to iTunes by programs working and records in the registry. Again, manually solve such an extensive collection of problems is quite difficult (especially without the necessary preparation), and therefore it is better to use a special tool -.

In this case, the deletion will occur in automatic mode (including the cleaning of all system directories from residual files, unnecessary components, and applications like Bonjour and Apple Software Update), and only two points will have to join users. First, at the stage of selecting the tools you want to delete. It is better to immediately use the search and, finding "Apple", immediately mark all the products available in the system and proceed to uninstall. Secondly, it is important to agree with the creation of a "recovery point".

Windows Installer package error

The problems with the installer are different, but it is the Windows Installer service to the root for the root of all attempts to use the Apple media player. The problem is solved literally in two bills - the main thing is to correctly repeat the described algorithm of actions.

The first step is to use the Ctrl + R keys combination, enter the command "Services.msc" command that appears and open the list of available "services". Scroll through almost the very end and find the Windows Installer item.

Or immediately open the "Properties" and click "Stop", and then "Run", or call the drop-down menu and click on the "Restart" item. In addition, the service needs and update - using the instruments offered.

MICROSOFT EASY FIX Utility

If the listed methods did not help and did not solve the problems and errors, then the last queue should be applied for help directly to Windows.

And the options here are two - first check the version of the OS and download the necessary updates (start, all programs - the transition to the center Windows Update and automatic loading of missing components, various "drugs" from the vulnerabilities encountered), and then - download easy fix with.

The proposed utility solves heavy failures and malfunctions - automatically loads missing documents, the "Registry", the label rules, restores the correct path of the already installed software. The procedure is intuitive and takes a minimum of time, and the result is usually really impressive.

All major methods of combating "seven" are listed above. The rest of the problems are resolved depending on specific cases (sometimes, for example, a banal reboot helps, sometimes it is much easier to go to the "dozen" or roll back to the older version of the system from the recovery point).