Blue screen of death Error codes 0x000000ED How to fix. Solution: Automatic error correction

What does blue screen mean with Stop 0x000000Ed error

The blue screen of death or BSOD (Blue Screen of Death) appears in cases where the critical system error occurred. During this error, absolutely all processes in RAM are stopped in order not to harm even more. Therefore, the appearance of a blue screen is equivalent to hanging a computer with the only difference that the error number is displayed, which is indicated after the word STOP. It is very good, because it is important to know what led to such a fatal collapse of the system.

This article will consider the 0x000000Ed Unmountable Boot Volume error and how to fix it. Error 0x000000Ed means that the operating system failed to mount the boot disk. With what it can be connected? Most often, the cause of such an error and the appearance of the blue screen 0x000000ED when Windows is booting is a damaged file system of the boot disk. This may be due to incorrectly shutting down the computer, the operation of the virus or damage to the surface of the hard disk (broken sectors on the disk).

How to fix the error 0 x00000000Ed Unmountable Boot Volume

Since the Stop 0x000000ED error means that the boot disk is damaged, the simplest solution of the problem in most cases becomes checking the hard disk to logical errors. Since Windows is not loaded, then there will be a little effort to prepare, but anyway there is nothing complicated.

However, I recommend before checking the disk on errors through the CHKDSK utility, check the hard drive of Victoria to Bada (broken sectors). Why? Yes, because in a large number of cases damage the file system of the boot disk, leading to the appearance of a blue screen with an error 0x000000ED when Windows is loaded, due to the appearance of unreadable sectors on the disk. The reasons for their appearance are the same: incorrect power failure during information recording, a hard disk, overheating or factory marriage and physical wear plates.

1. View Smart Disc, in case of suspicious sectors (item Current Pending Sector Count) Perform the surface check and erasing broken sectors or their remap.

2. Perform the check section of the utility chkdsk. .

In the overwhelming majority of cases, after performing Windows manipulation data, the blue screen with an error 0x000000EED remains in the past.

The publication continues the cycle of articles on the description and elimination of problems caused by the emergence of a critical system error that entails the appearance blue screen death (). In most cases, the problems that I came across personally in my practice will be covered in such a material and which I managed to level in some cases. Stop Error (Stop Error), Defect Control (BugCheck) or in a common BSOD - a fatal system system failure of the Windows operating system, which is the cause of the fullest operation of the main components of the operating system core, entailing the loss of dynamic unsaved user data and leading to the appearance on the screen Monitor Blue Death Screen (BSOD). Numeric designation STOP-error - the internal classifier Microsoft, which characterizes the cause of the fatal system error, which is used when diagnosing the cause of the problem.
This article discusses the failure with the identifier.

Symptoms

In the process of loading the Windows operating system, at a certain stage preceding the appearance on the screening of greetings and invitations to authorization on the screening screen, the download process is suddenly interrupted and you can monitor the following error message on the screen:

In general, the error format is as follows:

STOP 0X000000ED (0XAAAAAAAA, 0XBBBBBBBB, 0XCCCCCCC, 0XDDDDDDDD) UNMOUNTABLE_BOOT_VOLUME

1. 0xaaaaaaaa - the first parameter characterizing the address of an exception;
2. 0xBbbbbbbb is a second parameter characterizing a specific error;
3. 0xccccccc - the third parameter, not used;
4. 0xDDDDDDD - fourth parameter, not used;

The more detailed analysis showed that the symbolic error name, denoted as UNMOUNTABLE_BOOT_VOLUME (unconcentrable loading volume) speaks by itself, hinting to us that It happens in a situation where for any reason the boot code of the operating system of the initial stages cannot be connected (undermining, making an accessible to read) a boot logical volume containing the information that is critical to load the system, such as the regular download steps modules, without which further operating operations Systems are not possible.
It remains an open question, at what kind of loading stage do such errors begin to occur? After all, starting from the stages following the bootmgr, the entire code that is needed for these stages is already located on the main section to which the operating system is planned. That is, it is logical to assume that STOP 0x000000ED can occur at all stages after bootmgr? It is possible, but in order to accurately confirm this, you need to know at what stage the logic of the Kebugcheec function is starting to work, which is responsible for the output of the blue screen of death, whether it is loaded at the bootmgr, or later, for example, along with the ntoskrnl.exe kernel loading ?

General reasons

• Software Damage to the file system. Causes: incorrect shutdown of OS, unforeseen sudden power failure, software malfunctions that entail the impossibility of writing important blocks of the file system to physical media, or distortion of recorded information, damaged BCD download configuration files.
• "Hardware" damage to the file system. Causes: Defects of the magnetic surface of the carrier, such as damage to the magnetic surface of HDD or SSD memory cells, a malfunction of various drive control modules.
• Outdoor: BIOS / UEFI settings are configured for the forced use of the UDMA mode. Although the device itself does not support it.
• It is outdated: A standard 40-pin loop is used to connect the UDMA hard drive to the controller, instead of the 80-pin cable recommended in such cases.

General solutions

This section provides general recovery methods that are used for all subspecies of the STOP 0x000000ED error, regardless of the failure parameters (BugCheckParameter1, BugCheckParameter2, BugCheckParameter3, BugCheckParameter4), which are marked after the Stop error code in parentheses. All the acting acts below must be performed in order to eliminate the error.

Windows 7: Disc Checking from Recovery Console

When loading a damaged operating system, immediately after the status messages BIOS / UEFI, press the F8 key several times to output the additional download options. In the list that appears, select "Troubleshooting Computer" item:

Depending on the language of the localization of the system, we can leave the method of input from the keyboard unchanged on the "Russian" value.

After selecting the "Command Line" item, a well-known Windows command line is started. In the command prompt from us you need to run a specialized disk check utility (CHKDSK). It starts as follows:

cHKDSK D: / F / R

There is one important point here, you must correctly specify the disc on which we have the operating system and which you want to check for errors. Usually, when loading the recovery console, in the computer configuration with one physical disk, the system partition (section to which the Windows operating system is installed is assigned to the letter D :. In the multi-disc configuration, the letter may have a different value.

After the procedure for checking the disk for errors, the utility will return to the command line with the issuance of a detailed report on the verification console. If everything has passed successfully, and the utility has completed its work in normal mode, you can execute the EXIT command and fall back in the recovery parameter selection menu. Then we select a reboot to initiate the reboot process.

Specific features of some failures

With reference to the STOP 0X000000ED failure, the second input parameter (BugCheckParameter2), reflected on the blue death screen in parentheses (0xBbbbbbbb), can prompt us more detailed information about the details of the failure and determine possible more specific methods of eliminating the problem for cases when it can be Eliminated.

"Exp to" although it is considered morally obsolete, however, still enjoying great popularity among users due to its unassumability to system resources. However, it is quite often possible to notice the appearance of a failure of 0x000000ED (Windows XP). How to fix it with the simplest methods, read below.

Description in Windows XP

The safest symptom of the manifestation of such a failure is the emergence of a "blue screen", which turns many users in shock. However, there is nothing particularly terrible here. Failure is not critical Windows XP). How to fix this situation? First, consider the essence of the problem.

Most specialists in the prevention of Windows prevention are explained by the emergence of such a failure to damage the file system due to a sudden disconnection of electricity or voltage jumps. Because of this, the so-called BAD sectors appear on the hard disk, and the information contained in them must be restored. It is easy to guess that Windows XP (how to fix it will be considered in detail later) in this case may relate exclusively to software failures.

Sometimes a similar situation is manifested due to damage to the hard drive or loose connections of the loops, and the programming methods of the problem do not help. Here you have to change the hard disk or loops. If damage is too serious, apparently, the disk will not even format.

Error 0x000000ED in Windows XP: How to fix the standard method?

In the simpler case, the installation disk with a system distribution kit or any other bootable media from which you want to download is required by setting the appropriate drive priority in the BIOS settings.

Naturally, it concerns cases with a collection of 0x000000Ed Windows XP. How to correct this problem or like a mistake? For a start, you can select the recovery in the start menu, however, with a temporary file system failure, it may not work.

Therefore, you should do otherwise and choose from the window with a list of possible actions using the command line or at the download stage, press Shift + F10. In the console, you need to register the disk checking command with an automatic CHKDSK C: / R error correction attribute (Latera of the disk can not be used). Upon completion of the scanning process and troubleshoot, you can close the console or enter the Exit output command, after which the system is loaded again.

Can I fix the failure without an installation disk?

But some users have another question associated with the error 0x000000ED Windows XP: how to fix this failure without a disk? After all, not all users take care of creating bootable media in case of unforeseen situations.

It is believed to do it impossible. But at the extreme case, if the system "hangs" is not immediately, and somehow works, a similar check can be carried out in the properties of the system partition, and in some situations you can help roll back to the previous state, access to the parameters of which is performed in the standard "control panel " You can try several times forced to turn off the computer or a laptop long pressing the power button so that the system itself initiate the recovery process when starting. But if the Winchester began to "raw", no program methods will help.

This was discussed in the previous article. Error 0x000000ED quite clearly indicates the source - hard disk. In English, it sounds like this: Unmountable Boot Volume, and means that Windows could not boot from the installed hard disk or other bootable device. With the help of the algorithm proposed below, you can easily solve the problem and correct the 0x000000ED error.

Error 0x000000ED how to fix without assistance

When this problem appears, simply restart the computer. If it did not help, the error appeared again, go to its elimination.

The causes of the error 0x000000Ed are as follows:

• Problems in Windows system files;
• Problems in the hard disk;
• Viral activity;

Let us dwell on each point in more detail.

Error 0x000000ED due to problems in Windows

For example, you turned off the computer at the download stage, or when executing a defragmentation, or when performing a complete disc check - these actions can lead to the appearance of 0x000000ED. It is best to restore the use of the Windows installation disk. Download it from it, To do this, install it as the first boot device, and go to the "System Restore" link in the Installation window.

Next, the system may suggest you enter the administrator password or the choice which operating system is restored. After entering all the command line mode, the command line mode will be launched. Enter the command: CHKDSK / R, where the parameter / R is responsible for full check and correct disk errors.

Be sure to wait for the end of the check (no matter how long it seems). Reboot in the usual mode. Check Windows startup.

Error 0x000000ED - Cause - Hard Disk

When a hard disk fails and "broken" sectors or another problem are formed on its surface, the user observes this inscription from 0x000000ED. The characteristic feature of the disc problems are outside sounds at its work, or on the contrary, complete silence. The first thing will perform the steps mentioned above. If they help check the disk on errors with special programs that define its SMART state (Victoria, MHDD-TEST, etc.). Replace the hard disk if there are serious errors. Information from the old disk can be copied by connecting it to another computer.

Error 0x000000EED - Viruses

Yes, some dangerous viruses are able to damage the system files and lead to an error. Therefore, if the hard disk state is normal, and the message from 0x000000Ed continues to appear - run the full antivirus check by connecting your disk to another computer. Or use for checking boot disks of large antivirus companies.

Error 0x000000ED, How to Fix - Video Instructions

Error signals us that your HDD file system contains errors or that HDD is faulty.

What are the reasons for the manifestation of this problem:

• The file system was damaged after the electricity failure failure.
• The file system was damaged due to a faulty loop.
• The hard drive itself is damaged.

Error solving options 0x000000ED

1. To begin with, simply change the connecting cable between the motherboard and HDD. Do it even if everything is in order with him. All the same, it will be necessary to do with time.
2. You must check the file system on errors in it.

Windows XP.

• Press key R. When you start a disk with the system.
• Then we are looking for your operating system and click ENTER.
• Next we prescribe the command CHKDSK C: / R

These actions will launch the process of checking and eliminating errors.

Windows 7.

• Run the installation disk and click on " System Restore”
• Next, go to " System recovery parameters"And select" Command line”
• In it we prescribe a team cHKDSK C: / R

All unsuccessfully

There is a chance that you have not been able to correct the error Using the recovery system. In this case, it most likely means that it is your HDD failed. It is unlikely that you can do something to do something, but you can try to format on another computer.