How to run a system registry in Windows 7. Four ways to open the Windows registry. Start using the "Run" window

Sooner or later, before the advanced user, and before the green newcomer there may be a need to edit the registry. What can it be needed for? For example, non-licensed installations in the post-Soviet countries are not frequently required from the register of specific entries. Or you picked up the virus, and you want to remove the banner that requires money from the desktop. Sometimes even when installing antiviruses, it is necessary to adjust the registry. And then the user is asked: how to do it? We will understand from the very beginning.

Registry - This is a huge database where all the settings and parameters of the computer are collected, the connected devices, installed programs, as well as what was previously delivered, but already deleted.

In this article, I will describe the way out of the registry depending on the operating system installed on the computer.

How to open a registry in Windows XP

To open a registry in Windows XP, you need to perform a number of actions:

How to open a registry in the Windows Vista and Windows 7 operating system

Work on the opening of the registry in these operating systems differs little from the previous version, however it is easier to organize the search for the desired utility immediately through the search.

For this, on Task panels click Start, at the bottom of the pop-up window in the column called Find programs and files Enter regedit.exefurther "ENTER". Voila, access to the registry is open!

If for one reason or another to go into the registry through the search does not work, do not despair, all describes above the methods running in Windows XP, no one has canceled for subsequent versions, which are Windows Vista and Windows 7.

How to open a registry in the Windows 8 operating system

If you have a popular Windows 8 on your computer now, it will be useful for you to know that there are no innovations in accessing the registry in this version. You just need to go to the command input window to execute, and call the regedit.exe utility. Details about how to do this, I have already described above.

Another easy way to suit all versions of Windows is that you just need to go to the Windows folder located on the disk with, and click twice on the file regedit.exe.

Conclusion

There are also specialized packages for working with the registry, for example, a program called Regeditx. They may need those who are often brought to dock with the need to change in the registry.

Finally, I would just like to recall that if you are not a "advanced" user, and do not know how to handle the registry, it is better not to delete, do not make changes to the data, and in no case do not rename folders or files in the registry. Correct the registry only if you are exactly sure what you are doing.

And although the maintenance of the registry can be very effectively used when solving various practical tasks, still do it costs carefully and carefully, otherwise your computer may behave very unexpectedly and unpleasant. Incorrect registry handling can lead to the fall of the entire system, and it often does not want to deign Windows and lose data does not want anyone.
Good job!

In this instruction, I will show several ways to quickly open the Windows 7, 8.1 and Windows registry editor. Despite the fact that in your articles I try to describe all the required steps in very detailed, it happens that we are limited only by the phrase "Open Registry Editor", which has a beginner The user can cause the need to search how to do it. At the end, the instructions also have video with a demonstration of ways to start the registry editor.

The Windows registry is a database of almost all Windows settings, having a tree structure consisting of "folders" - registry sections, and values \u200b\u200bof variables that determine this or that behavior and property. To edit this database and requires a registry editor (for example, when you need to remove programs from autoloading, find the malware, the launch of which is "through the registry" or, say, remove the arrows from shortcuts).

The second (and for someone first) by convenience way to start - use the Windows Search Functions.

In Windows 7, you can start typing "regedit" in the Start menu search window, after which it is in the list to click on the registry editor.

In Windows 8.1, if you go to the initial screen, and then just start typing "regedit" on the keyboard, the search box will open in which you can start the registry editor.

In Windows 10, in theory, the registry editor can be found in the "Internet and Windows search and Windows" field located in the taskbar. But in that version that I am now installed now, it does not work (to the release, confident, fix). Update: In the final version of Windows 10, as expected, the search successfully finds the registry editor.

Run the regedit.exe file

The Windows registry editor is a regular program, and, like any program, you can run it using the executable file, in this case - regedit.exe.

You can find this file in the following locations:

C: \\ Windows \\
C: \\ Windows \\ SYSWOW64 (for 64-bit versions of OS)
C: \\ Windows \\ System32 (for 32-bit)

In addition, in 64-bit windows, you will also detect the regedt32.exe file, this program is also the registry editor and works, including in the 64-bit system.

Additionally, the registry editor you can find in the C: \\ Windows \\ WINSXS \\ folder, for this convenient to use the search for files in the explorer (this location can be useful if you did not find it in standard registry editor).

How to open the registry editor - video

Finally - video in which ways are displayed to start the registry editor using the Windows 10 example, however, the ways are suitable for Windows 7, 8.1.

There are also third-party programs for editing the Windows registry, which in some situations may be useful, but this is a topic of a separate article.

The registry is, if we speak in a simple language, one of the foundations for any technique on the Windows operating system. It is there that are defining settings (and more global, and local) for the user-based on the user, it is also possible to see it, where all data, expansion and registration are located. To get the right to access the registry was simpler, Microsoft developers were provided by a simple and projective program for a simple user - Regedit (Registry Edit, which means "registry editor").

Registry Edit is the registry of a tree structure - everything is decomposed, as they say, "on the shelves": all the necessary keys that are in certain folders are very simple, besides, they have a statistical address. The system program, by your team, will find a definite entry, "Starting" the entire registry, you can also create and delete, edit the already created records.

Running Registry Edit in Windows 7

Like all other Windows programs, Regedit has an executable file that needs to be launched to open the registry window. To get access to Registry Edit there are three options.

It is worth noting that the user who wants to make any changes to the registry must go under an account with the administrator's rights, or to be the right administrator - the right-hand license is not enough to perform the task.

Option 1: Using Explorer

Access to the executable registry file can be obtained by finding it through the Windows Explorer in the system section on the hard disk. The instruction looks like this:

Option 2: Row "Run"

With it, you can run almost all elements of the Windows operating system. In the case of the registry, the start process will look like this:

Option 3: "Start" menu

The instruction for this option looks like this:

As you can see, in order to cause "REGESTRY EDIT" There is nothing complicated. It is worth remembering that in the use of this program you need to be extremely careful: the only error can lead to a partial or complete disruption of the functioning of the computer. Before you recommend you to create a backup.

Today I would like to tell how to open a registry In Windows 7 or Windows XP. Each of the users sooner or later comes to the problem of slow computer. One of these reasons is lighted in the register of your computer, and to correct the situation should be cleaned.

If you do not know how to do it, read the article How to Clean the Registry. And in order to find out how to open it read the full article.

Registry -this is a huge database in which all computer settings are stored. It indicates which programs are installed, as well as the devices are connected. The registry is used in cases of the appearance of a viral banner, as well as in cases of the system failure due to the installation of the viral software.

I want to warn you in advance that if you are very bad about the registry branches, then you should not perform any actions yourself. Either do as described in the article, or do nothing at all. You can also read at your leisure how to check the video card. So, let's begin? Let's first consider the option of opening the registry in Windows 7.

How to open a registry in Windows 7

To get started, go to the Start menu, and then select Run.

Or you can simply press the WIN + R keys and you will open the command line window where you can write the command you need.

In our case, this is the REGEDIT command. Entered the command? Now boldly press OK and after you will open the registry editor window.

Ready? That'd well done! In Windows 7, I look at you already open the registry.Let us now move on to other ways and in another operating system.

How to open a registry in Windows XP

To open the registry, we need to press the Ctrl + Alt + Delete keys. After that, go to the task manager and in the window that opens, go to the left corner to the File tab\u003e New task.

And already in the new window, enter our registry command Regedit. I wanted to ask you about something late. If this article helped you, then Budie is kind, help me. Subscribe to blog updates, and in response I will send you a different information on the configuration of the computer.

I will finish this. I see that you learned how to open a registryin Windows 7 and XP, as well as I think I read how to clean it. If you did not read this link to the article is slightly higher.

Have questions? - We will answer them for free

Good day.

System registry - It is in it that Windows stores all data on the settings and parameters of the system as a whole, and individual programs in particular.

And, quite often, in case of errors, failures, virus attacks, fine-tuning and optimizing Windows, you have to go to this most system registry. In my articles, I repeatedly write about changing any parameter in the registry, remove the branch or something else (Now you can refer to this article :)) …

In this reference article, I want to bring some simple ways how to open the registry editor in Windows operating systems: 7, 8, 10. So ...

1. How to enter the registry: several ways

1.1. Through the "Run" window / Line "Open"

That is good this way that it is always almost trouble-free (even Elsie has problems with the conductor, if the start menu does not work, etc.).

In Windows 7, 8, 10, to open the "Run" string - simply press the button combination Win + R. (Win is a button on the keyboard with a badge, like on this icon :) .

Note! By the way, I want to recommend you an article with a list of commands for the "Run" window. The article provides several dozen most necessary commands (when restoring and configuring Windows, fine tuning and optimizing PCs) -

1.2. Through the search string: Run the registry on behalf of the admin

First open a regular conductor (Well, for example, simply open any folder on any disk :)) .

1) In the left menu (see Fig. 3 below), select the system hard disk on which you have installed Windows - it is usually marked by specials. icon :.

By the way in fig. 4 It is shown how to start the editor on behalf of the administrator (for this you need to right-click the link found and select the appropriate item in the menu).

1.3. Creating a shortcut for launching the registry editor

Why look for a label to run when you can create yourself yourself?!

To create a shortcut, right-click anywhere in the desktop and select from the context menu: "Create / Label" (as in Fig. 5).

By the way, the label itself, after creation, will not become unless, and with the registry editor icon - i.e. It is clear that it will be open, after clicking the mouse along it (see Fig. 8) ...

Fig. 8. Label to run the registry editor

2. How to open the registry editor if it is blocked

In some cases, enter the system registry does not work (at least in the above methods :)) . For example, this may occur if you have been subjected to viral infection and the virus managed to block the registry editor ...

What to do this case?

I recommend using the AVZ utility: it not only can check the computer to viruses, but also restore Windows: for example, unlock the system registry, restore the conductory settings, browser, clean the Hosts file and many other.

To restore and unlock the registry, after starting the program, open the menu file / System Restore (as in Fig. 9).

Fig. 9. AVZ: File / System Restore Menu

Fig. 10. Unlock system registry

In most cases, this recovery allows you to enter the register in the usual way (described in the first part of the article).

Note! Also in AVZ, you can open the registry editor if you enter the menu: service / System Utilities / Regedit - Registry Editor .

If you did not help what is described above , I recommend to get acquainted with the article about the restoration of Windows -

3. How to create a branch and parameter in the registry

When they say to open the registry and go to such a branch ... many it simply puts in a dead end (talking about novice users). The branch is the address, the path that you need to go through folders (green arrow in Fig. 9).

Example of the registry branch: HKEY_LOCAL_MACHINE \\ SOFTWARE \\ CLASSES \\ EXEFILE \\ SHELL \\ OPEN \\ COMMAND

The parameter is the settings that are in branches. To create a parameter, simply go to the desired folder, then right-click and create a parameter with the desired settings.

By the way, the parameters can be different (pay attention to it when you create or edit them): String, binary, DWORD, QWORD, multistating, etc.

Fig. 9 branch and parameter

The main sections in the registry:

HKEY_CLASSES_ROOT - data on files registered in Windows;
HKEY_CURRENT_USER - User settings entered in Windows;
HKEY_LOCAL_MACHINE - Settings related to a PC, laptop;
HKEY_USERS - settings for all users registered in Windows;
HKEY_CURRENT_CONFIG - data on equipment settings.

This is my mini-instruction certified. Good job!