How to make a recovery point. Creating a system recovery point to manual. Restoring performance with standard Windows tools

The correct operation of Windows 7 depends on the presence of registry files and data in it. If they are damaged or remote, the performance of your computer will be broken.

At the same time, the following problems will be manifested: slow work, there is no possibility of downloading programs you need, or they work incorrectly. It may be that PC does not want to turn on at all.

This always knocks out of the gauge, especially if the work directly depends on the use of the PC, however, it is possible to correct the problem of work without the help of the wizard. The Windows 7 operating system has everything necessary for self-solving this problem. In order to return the computer to the computer, use the system recovery function. What is it for what you need and how to create a kickback point now learn.

What is a "system restoration"?

The system recovery function is designed to return the operating system by the time when functioning occurred normally. It may be required if you delete any files that ensure the competent operation of the OS.

It can be broken:

1. malicious software;
2. banal non-compliance with the rules for using system files.

For those who conduct accounting or plays computer games, it is categorically unacceptable to reinstall the entire operating system. At the same time, if the user did not have backup copies of the documentation on another local disk or the drive, the reinstall will simply destroy reporting the reports.

The system recovery affects only important files for OS, so the experience caused by the user with the removal of photos, films other elements of multimedia are in vain. Letters that the owner of the computer received by e-mail will also remain entirely, so you can stop afraid for their safety.

Windows 7 uses the default function "System Protection". But it is advisable to apply it only for system local disks, and for the rest it is recommended to disable.

To make it enough:

The types of the operating system return to the normal mode of operation are much more.

This operation is carried out by the following methods:

• by downloading the latest favorable setting - The most simple and frequently used method of resuming performance. The first thing should be included in the safe mode to make it enough, restart the computer to press F8, select "Safe Mode", and after clicking "Enter";
• in the regular return of the system to normal - Thanks to this method, fixation of the operability of the OS, and at the time with the help of the safe mode and the original disk of Windows 7, enter the "Safe Mode" insert the installation disk and select not the installation, but recovery. Thus, through the boot disk, the system operation will be analyzed, identifying malfunctions or lack of certain data, and then rollback will be performed;
• by earlier backup - At this stage, there is a resumption with the help of the previously created archive of your Windows 7. Data from it can be recorded on a USB drive from which rollback will be carried out. It is performed, as in the case of an installation disc.

To return OS to normal operation, a special point is created from which it will happen.

It contains registry settings and other information that Windows 7 applies. It is similar to the game checkpoint, from which it will restart it in the event of the operation failure. The procedure is performed before installing the new software. It should be sorted out how it is done.

Video: Creating a point

Create recovery

Creating a Windows 7 recovery point can be done in two ways:

1. manually;
2. automatically.

First of all, it should be understood how it is done by the PC user manually.

Manual formation process

The algorithm for creating a rollback point is simple and consists in step by step fulfillment of the following actions:

Photo: Menu caused by right mouse button

There is nothing complicated in the use of a manual method, however, thanks to an automatic version of solving an arisen problem, you can easily get rid of inconvenience that are associated with the resumption of Windows 7.

Automatic Creating Windows 7 Recovery Point

In order to save yourself from the need to manually create a rollback, users of Windows 7, its developers have a simplified version. It allows you to automatically create a rollback each time. This method is a bit more complicated, but much more efficiently, more comfortable and fully facilitates the lives of all PC owners.

There are two possible automatic creation methods:

1. fully automatic - rollback will be created without a user's knowledge;
2. semi-automatic - you will need to enter the title of the point each time the system starts.

The choice of this or that method is purely individual, but most of the owners of the equipment prefer the first, because he deprives them of need to additionally do something. Further you will be provided with two automatic creation codes. They should be copied to a text document, and after Save, specifying the extension ".vbs".

It will be very important to consider if the notepad is used when creating, select the "Text Files" file, and the name will be created in quotes, for example, "name.vbs". If you have the "All Files" file type, you can refuse the use of quotes.

We will analyze the phased algorithm for further action:

No matter what option is selected, the system will now automatically create a point for recovery each time. It is very convenient. After all, you do not need to do the manual operations before each installation of the new software to the computer. Work without fear of problems, because the beginning of a rollback can start at any moment.

Questions and answers

Now let's check the answers to frequently asked questions about the above.

Changes made by correcting / restoring may notice?

The adjusted adjustments can be canceled by the user. To do this, it is enough to enter into the "System Restore" and click Cancel Changes. This operation is recommended to be performed if the problems associated with the work of Windows 7 could not be eliminated.

Video: Skulling Winds

What files change in the system when recovering?

Changes will undergo only system and registry data. Returning the operating system leaves personal files intact, so do not be afraid for your photos, music, video and email. Renewal is unable to return documents and files deleted earlier.

How to choose a recovery point?

How much is the recovery point?

They persist until then until the space allotted on the local disk is fill. In addition, the system can automatically delete outdated, and if the user of the personal computer disables the "system protection" on the local disk, then all the points made for it earlier will be deleted.

Disappear of the resumption of Windows 7, what to do?

They may disappear if in addition to the W7 you have another OS, as well as a defragmentator can delete them with shadow copies of data. In addition, you may not have enough memory for them or the system clears them yourself.

Can't create a point?

To solve the problem, "I can't create a point" enter the control panel to select "Administration", then go to "Services". In the window that opens, find the "Shadow Copy of Tom" click twice and change the management status on "manually". After that, inconvenience will be eliminated.

It is used to cancel our erroneous actions when working on a computer that led to its unstable work. To our maintenance service, come for help people who use the Windows operating system 7 for many years and only one of ten knows about recovery points And one of the fifty about previous versions of files, but does not know how to use them correctly. With the apparent ease of application of recovery points, this feature has many features that you need to know. This article describes the information based on the personal experience of the author, for example, we will learn why when the system is turned on, the recovery points disappear or are not created at all. How to use the recovery point when there is no launch of Windows 7 and much more, I hope we will help you avoid many mistakes.

Windows 7 recovery point

If you select and apply the recovery point, you need to know that the changes usually concern only system and software settings of Windows 7. All programs installed by us after creating the recovery point selected by us are deleted.

• For example, if you have created a recovery point on January 8, and on January 12, you want to roll back to the state of January 8, then, accordingly, select the recovery point on January 8. All programs installed by you in the period of time from January 8 until January 12 will be deleted.

As for your personal data, no changes should happen to them. On this virginity, you can see that the protection of the system and the creation of recovery points is enabled by default only for a disk C: \\. Check for Start-\u003e Control Panel-\u003e System and Security-\u003e System-\u003e System Protection.

You also need to know that the point windows 7 recoverywill not help recover previously deleted files, but in this case you can use the function Previous file versionsonly if the system was turned on for this disk and in Settings for recovery parameters Paragraph is marked Restore system parameters and previous file versions. In this case, Windows 7 protection archives personal user data with shadow copies. Also, you see that if you press the configure button, (upper illustration) window protection window, for a local disk (C :), a window will appear in which it can be seen that 10% disk space is selected for the disk recovery points (C :). Know what is better to highlight 15%. The larger the place on the hard disk for the recovery points, the longer they are stored. If Windows 7 needs to create a new recovery point, and the place to create it is not enough, the old point will be returned and the new one will be created instead.

Note: If the System Protection is enabled for any volume in the Windows 7 operating system, then user data is archived by creating shadow copies and become available in previous versions of files. Shadow copies, do not exist forever, the space is allocated for storage on the hard disk, which is adjusted in the system protection settings, as soon as it ends, with the consciousness of new copies the old are removed.

For example, we have the protection of the system for the disk C: \\, respectively, we can use the previous version of files with you, click on the C: \\ Program Files folder with the right mouse button and choose Restore the former version,

a dialog box opens Previous versionswhere all available versions of previous files will be listed. Files can be restored or simply copied by saving the previous and current version.

Read the article fully previous versions of files.

When setting up the system protection for volumes stored only your files, you need to choose in Recovery parameters paragraph Restore only previous file versionsSince no system parameters are not on them.

If you are worried about saving only personal data, then you better take advantage of the function Archiving computer data, This is a separate serious topic, just read it separately.

Windows 7 recovery point It is planned and created once a week, after the same time interval, such points are also called control.

Also, the recovery points of Windows 7 creates before installing any programs, well, and finally you yourself can create a point of restoration by hand before installing some application in the system protection dialog box.
Let's first consider a simple example of creating and applying the recovery point, and then we will analyze the examples more comprehensive.

Created Windows 7 recovery point Thus,\u003e Start-\u003e Control Panel-\u003e System and Security-\u003e System-\u003e System Protection. This dialog box is configured and creating recovery points. For example, we want to independently install a serious program, but we are experiencing, suddenly we will do something wrong, let's reinsure and create a manual recovery point for a disk from: \\, to which we will install our program.
Start-\u003e Control Panel-\u003e System and Security-\u003e System-\u003e System Protection-\u003e Create, then give the name of our point, for example 13.

Next, set any program, but something went wrong, for example, the application does not start and we decided to roll back with the recovery point at the time when the problem program has not yet been established on our computer. We go to the protection of the system and choose not to create, but restoration, further

the restoration of system files is launched, click further and select our recovery point 13, pay attention to the item Show other recovery pointsIf there is a tick, you will open other earlier recovery points.

Warning that the recovery process will not be possible to interrupt before its end, agree, then reboot.

The computer is loaded and the program we installed, as it did not happen. This is how the recovery points work.

Windows 7 recovery pointYou can use if your computer is not loaded by resorting to a secure mode, it is impossible to create a recovery point here, but you can roll back to the stable state of the computer. To get into a safe mode, you need to press the F-8 key on the keyboard immediately after the computer is started. The Advanced Download Options menu opens in front of you: Troubleshooting a computer, then a secure mode. In safe mode, use the Windows 7 recovery point, click Start-\u003e Control Panel-\u003e Recovery, then the system restore and start recovery will be loaded, select your recovery point and forward.

Important information: If you have changed after you create a password recovery point, get ready for the old, create a password recovery disk.

Windows 7 recovery points It is used by default about 10% -15% (as I said above), disk space, adjust the disk volume allocated for recovery points in the Configure window - System Protection. If there is a lot of places on the hard disk for recovery points, they will be stored for a long time. To remove all recovery points, you need to press the Delete button in this window and all recovery points are deleted.

How to remove all recovery points other than the last? Start-\u003e In the search field, enter the disc cleaning, then select the disk to be cleaned, then go to the Advanced tab,\u003e Restore System and Shadow Copy-\u003e Clear.

Why are Windows 7 recovery points are not created?

In this article, I told about three methods of restoring the system: - usual, using the command line and using the installation disk. Also, I told about creating an OS recovery point.

In addition, in another article, I wrote about creating and in what ways you can create it. On this occasion to me on El. The address came many letters. In these letters, people ask to tell how to create a recovery point automatically?

Let me remind you to those who first went to my site. OS recovery point is needed to restore the system with unexpected failures. You seem to transfer the system from the past when she worked perfectly. You can believe me, it is much easier than to look for the causes of failure and correct them.

In general, if the system works fine, the recovery point should be created automatically - when deleting any program or other changes in the system. But sometimes it happens that this function does not work. Therefore, in the article we will look at: - how to create a recovery point automatically in two ways. But, before that, let's consider the method of manual creation of such a point.

How to create a 10 windows recovery point manually

Make it, quite simple. To do this, you just need to enter "Creating ..." search "Start" and select File:

We have a recovery point file. Open it. Select the "System Protection" menu. We translate the look at the bottom of the window and select the "Create" button. Press it. On top of this window, we have a window for creating this point. We introduce the title of the point, I usually put the number of this day and a month, it is more convenient, and click OK.

We started to create a recovery point.

Then, we see a message that the point is created.

For our point you need a place on the S. disk. Therefore, we select "configure" (above the "Create" button). We will open the "Recovery Settings" window, where we will see how much space is given to the restoration of the system.

Be sure to place the Chicbox over the line "Enable System Protection". Next, check the disk space. I advise you to be 7 percent, but you can do more or less. It all depends on the volume of your disk S. The more space you give to the restoration of the system, the more points you can create.

Now let's see, our point has been created, or not. To do this, click "Restore":

How to create a recovery point Automatic job scheduler method

We now turn to the automatic method of creating this point. To do this, in the "Start" introduce Taskschd.msc or just write the "job scheduler".

Open the file and go on the next way - Planner Library \\ Microsoft \\ Windows \\ SystemRestore

In the file "File" click on the SR right button of the mouse and select "Properties". In a new window, choose the "Triggers" menu. At the bottom of the windows click on the "Create" button.

A new window opens, where we can choose the frequency of creating such points. I advise you to create data points 2 - 3 times a week. Therefore, choose "Weekly".

Then, I put a tick over Monday and Friday and click OK. Additional parameters can not be touched, because In the next step, select the "Conditions" menu (although you can experiment).

In the "Conditions" menu, we put a tick above the item "Run with a simple computer" and select 10 minutes. This means that the computer will start creating a recovery point, only after it has been idle 10 minutes. In other words, if you watch the movie, or work with a specific program, the computer will not start unexpectedly creating a reducing point.

For laptops, you can choose to "run when powered by power supply". Click OK. For various reasons, this program may not work, in this case, I prepared you a special script that will make that your computer will create restorative points at each start, ate it suits it.

How to create a recovery point automatically script

Now I offer you a script that will help create such points automatically:

If wscript.arguments.count \u003d 0 THEN
Set Objshell \u003d CreateObject ("shell.application")
Objshell.Shellexecute "WScript.exe", CHR (34) & WScript.scriptFullName & CHR (34) & "Run", "Runas", 1
ELSE.
GetObject ("WinMgmts: \\\\. \\ Root \\ default: SystemRestore"). CreateRestorePoint "Current Recovery Point", 0, 100
End if

To make the script, you need to do the following conditions:

1. You need to copy the script into a notebook or another text editor;
2. Select the "File" menu, then "Save As" and save it with any name (Latin) by selecting the extension.vbs. For example, script.vbs.
3. Select the type of file - "All Files" (All Types) and save the script. Next, create a file shortcut by clicking on it with right mouse button and choose - send, then - work desk.
4. Then, press Alt, and, holding this button, drag and drag the file to the "Start" button "Start". Not immediately, but you will succeed. Now your computer will start creating such points with each inclusion.

If you have Windows 10, then we do everything as in the article, only after creating a shortcut, send it to the "Startup" folder. To do this, press Win + R. Inserting the window inserted shell: startup:

We have a window that we will add our fi from the desktop.

Personally, this method does not like this way, and I chose, creating a recovery point twice a week. Successes!

Output: - Windows 10 How to create a system recovery point becomes clear, after reading the article. I advise you to create a similar point at least 2 times a week. And better than 3, on every fireman! Successes!

There are cases when after installing some kind of program or other actions: Windows operating system is incorrect; programs that worked - do not work; Working earlier games do not start. In this case, we will help us a very wonderful function from Microsoft, assystem Restore (rollback to the recovery point). Also, this poundation can help us if your computer infected the "Extortile Banner". In this article, we will tell you: how it is done that it is necessary that it worked.

1. If the system is operational.

On the desktop, click the right mouse button on the "Computer" or "My Computer" icon and choose properties

z.atham in the right part chose protection of the system.

Attention! Here we can see: whether this component is enabled and

how it is configured.

If it is not written in front of the specified disk switched on, We will not be able to restore the system, but we can enable this feature by clicking on any disk and press the button customize, Z.atem put a tick opposite restore system parameters and previous file versions, Select a specific slider space that will be used for recovery files. The more places allocated, the greater the recovery points the system will create. So if your component is turned on, press the button restoration

E.if you suits you recommended recovery(the date of the computer corresponds to the time when everything worked with you), click further,if not, then you need a tab select another recovery pointand further.

In this window you need to put a tick show other recovery pointsand choose the most desired point. Selected click further.

Press readyand we are waiting for the end of the process (if you have a laptop or netbook, make sure that you have a good battery charge, if the charge is a little connected to the power source)

2. If the system does not turn on or when it turns on the "banner extortion"

When loading the operating system, press the key F8further

troubleshooting computer and ENTER.

choose the desired language

Today we will look at a topical topic - why the computer slows down and how to get rid of this problem quickly. We all know that viruses, incorrectly installed or remote programs, modifications of the registry branches and the replacement of system files. Each user faces it - all thanks to the features of Windows.

In order to save time the creators of the "windows" provided users to restore the system using a special backup of the main system parameters. That is, if at the moment the computer works fine and there is absolutely no problems - it makes sense to secure yourself in the future and create a Windows 7 recovery point.

Preparation

Before you fulfill this procedure, we recommend removing unnecessary programs and games, clean the cache registry free CCleaner and Auslogics boostspeed programs. At the same time, you can delete and unnecessary files occupying a hard disk.

It is also important to remember that all changes made after the process of creating a recovery point will be lost in the case of returning to it. At the same time, injected music, movies and other content will be in place, but program settings or new installations will be canceled. So if you later decide to roll back the system, then they need to save them in advance.

Restoring the system is a special module that is present in all Windows starting with XP. It is specifically designed to have the opportunity to roll back the system back at a certain point. That is, it is a kind of machine of time, which, however, works only in the opposite direction.

Restoring performance with standard Windows tools

1. Right-click on "My Computer", then in the left window that appears on the left, click "Advanced System Settings" - "System Protection".

2. Press "Setup" and moving the slider to the right, as shown in the pictures above, select the space on your hard disk that you do not mind spend on the backup point. I have 6 gigabytes.

3. Now repeat item 1 again and press "Create" - enter the date or title - "OK". After 10-15 minutes the alert window will pop up on the successful completion of the process. Close Close Close. Thus, a backup recovery point of Windows 7 system will be created.

Now that the computer will work badly, and the usual cleaning of the registry and destruction of garbage cannot cope with the task - do the following:

• close all programs and save the necessary changes,
• in the Start menu, there is a search window where you need to enter the word "recovery",
• after a second from above, in the results, click "System Restore".

If there are several recovery points of recovery - select the appropriate one. Click further and agree with the reboot process after the end of the process:

Recovery using the MULTIBOOT utility

Especially for those who do not work work with standard means as an alternative, I propose to use the free Multiboot program.

To do this, it is enough to download the archive with the program and run the executable file multiboot.exe by right-click and click "Run from the administrator name".

Our attention will open the program to manage the program.

Put the checkboxes in the same way as shown in the figure.

With the active item "Restore Windows Vista / 7" boot on all discs, a MBR boot recovery command will be available on all discs.

If you have Windows XP parallel as the second operating system - check the box in front of the "Add download menu for Windows XP". Thus, this version of Windows will be taken into account.

The latter option allows you to adjust the delay time before starting the selected system in seconds. Choose to your discretion. After setting up the program, click "Run".

The "Advanced" tab allows you to download backup points saved to a file with the extension "BCD". Before using this program, we strongly recommend reading the instruction.