How to open a registry in Windows 8.1. How to open the Windows registry editor. Registry Editor Command Line Keys

Windows registry is a storage for all settings operating system which depends on the correct and correct operation of the entire software. All changes made are saved in it and often to solve many problems or to combat viruses, you need to manually find the desired parameter and change settings in it.

It should be remembered that all changes have been made can radically influence the further work of your computer, and therefore it should be done only in the case when you are confident in your actions.

To enter the registry to change Windows Parameters, you need to open a window with a directory tree. There are two options, PRIMI Press "Start" - "Run" or the second, the combination of the "Win + R" keys. A small window will open on the screen, you need to register the following command in it - "REGEDIT". After that press ENTER or OK.

Further, the registry will open before you, or rather the window in which you can search for software and systems And if you need to change the settings of its operation.

Let's start with the latest Windows 10, and consider two options to access the registry.
Run registry editor - Method 1 for Windows 10

Click the Start button with the left mouse button (or the "Windows" key on the keyboard);
When the Start menu opens, type the "REGEDIT" (without quotes) command on the keyboard;
At the top of the search menu, the "Regedit - execute command" appears, click on this item with the left mouse button;

If the registry editor is confirmed, click "Yes";
You will appear in the registry editor window, in which you can make changes to the registry itself.
How to open a registry in Windows 10

Run registry editor - Method 2 for Windows 10

Press the "Start" button with the right mouse button (or the WIN + X key combination);
In the menu that appears, select "Run" (these two steps can be replaced with one combination of Win + R keys);
In the "Run" window, type "REGEDIT" (without quotes) and click OK;
In the start confirmation window, click "Yes";
The registry editor will appear, and it is possible to crime to make changes.
Visively see how to go to the Winows 10 registry, you can on this video:

How to open a registry in Windows 8 / 8.1

To run the registry editor in Windows 8, you need to perform the same steps as in Windows 10, if you have version 8, and not 8.1, you don't have the "Start" buttons, so in the first step of the first way, press the "Windows" key, And then everything is according to the instructions above.
Detailed video instructions, how to enter the Windows 8 registry editor (8.1):

How to open a registry in Windows 7

To open the registry editor in Windows 7, you need to do this steps:
Run registry editor - Method 1 for Windows 7

Dial the command "regedit" (without quotes);
Press at the top of the menu, under the inscription "Programs" on the "Regedit" lettering;
On the Run confirmation request to select the answer "Yes".
Run the registry editor - Method 2 for Windows 7

Click on the keyboard the combination of the Win + R keys (Hold down the Windows key and, without releasing it, press the R key);
In the "Run" window, dial the command "regedit" (without quotes) and click the "OK" button;
Confirm the launch of the registry editor with the Yes button.
Both ways to enter the Windows 7 registry editor can be seen on this video:

How to open a registry in Windows XP

In Windows XP, the opening of the registry editor is somewhat different:
Run registry editor - Method 1 for Windows XP

Click on the "Start" with the left mouse button;
In the right column, find the item "Perform" (both steps can be replaced with a combination of Win + R)
In the "Starting Program" window, write the command "Regedit" (without quotes) and click the "OK" button;
Open the registry in XP

Run the registry editor - Method 2 for Windows XP (and not only)

Open the conductor (you can use the WIN + X key combination);
Go to the "C:" disk;
Open the Windows folder;
Locate the "regedit" file and run it.
And, of course, the video version opening the registry editing program in Windows XP:

The second way is suitable for all listed versions of Windows. Moreover, you can snatch a little:
Reaching the "REGEDIT" file you can create a shortcut on the desktop and further considerably simplify access to the registry editor.

Starting the editor There is a minimum of 4 ways to call this utility:

Through the "conductor".

Using the search

Through the service "Perform". Command line. It's not necessary to describe them, since some require a certain level of knowledge and skills, but not to mention them would be inappropriate. So, proceed.

Through the conductor

We open the "My Computer", go to the system disk (often this C) and in the search bar, we enter: regedit. After some time, which will be required to make a search, the same editor will be proposed in the main part of the window. It will only be left to open it and start producing the required actions. to content.

Via search

We bring the mouse cursor to the right panel where you select "Search" and ask the same command as in the previous paragraph: regedit. After that, double-click the application itself. The utility itself is as follows: Read also what is virtual machine For Windows 8 and how to run it to the content.

Through the "Run" command

This option implies the call to the intermediate component. We use the keyboard with a combination + [R], after which we enter the already familiar regedit.exe in the field or without the extension ".exe" and click.
1. Run the registry editor using the Utility "Run".

It is not set to repeat that the "execute" utility is one of the most convenient in Windows, it can be easily and quickly launching the absolute majority of systemic windows utilities. In this case, this is two three steps:

1. Click Win + R keys
2. We write in the reported command Regedit
We write in the command opened command Regedit
3. Click the OK button. Everything, the registry editor is running.

2. Using the search in the Start menu

Here the complexity depends on the operating system, so in Windows 10, the search is directly on the taskbar, just write regedit and open the search result.

In Windows 7, you must open the "Start" menu and enter the same query at its bottom.

In Windows 8.x, open the Start menu and click on the magnifier in the upper right corner.

And then enter a search query. And launch the registry editor.

3. Using Windows Explorer

There is also nothing complicated here, open the conductor and go to the folder.

Sheets down and looking for eyes regedit.exe. When found - run.

Using the task manager
Here the principle is the same as in the first way, but the actions need to be done more. Run "Task Manager". For example, right-click on the taskbar. And select "File" → "Run a new task".

In the opening window we enter Regedit and click OK.

5. With help command line
How to run the command line we already know, in our context the easiest way will use the way through the context menu of the "Start" angle. And in the window that opens enter regedit

The result of any of five ways will be the launch of the Windows Registry Editor window.

The registry is a large database in which all the parameters needed for the normal operation of the operating system are stored. You can view it through the registry editor that is available in Windows. Any user can go into it if its account has administrator rights.

And if you made any changes, or the computer turned off by itself, for various reasons, or you accidentally pressed the wrong key and deleted the parameter or a whole branch of the registry - it may not be better to affect the computer.

And yet, if this happened, let's understand what ways there are ways to restore the Windows 7 registry and Windows 8, for normal computer operation.

Using a backup

As you probably guessed, this method is not suitable for everyone. If you have created before backups Registry via "File" - "Export" - read on if not - go to the next way.

So, you have a backup. Press the combination of Win + R, the "Run" window opens. In the "Open" field we write Regedit and click "OK".

The registry editor window should appear. In it, go to the "File" tab and choose from the "Import" menu.

Explorer will open, find a backup previously created in it and click Open.

Wait for the files to be copied.

Using the system recovery

System recovery can be done using control points of recovery. You could create them earlier when the system worked stably and everything suited you. Or they could be created automatically by the system: when making changes to the computer configuration, before installing the drivers and so on.

First consider how to restore the registry if the operating system is loaded. In Windows 7, go "Start" - "Control Panel".

Here we are interested in item "Restoration".

In the next window, click "Running system recovery".

Now you need to select a recovery point. If there are several points, and you doubt, look at the point of creating a point - your computer worked fine in these numbers?! - Choose it. Press "Search for affected programs"You can see which programs will be removed as a result of recovery. Press "Next".

I confirm the system rollback to the selected state, pressing "ready."

All data, including the registry, will correspond to the status that was at the time of creating the selected recovery point.

If you have Windows 8 installed on your computer, read the article: Windows 8 recovery point and system rollback. There you will be interested in the second part. Actions will need to be performed as described above.

If the OS does not start

Restore the registry if the computer does not turn on You can also. In the Windows 7 operating system, when the computer is loaded, press, with an interval of 1 second, the F8 button. Window appears "Additional download options". In it, with the help of arrows, select item "Troubleshooting Computer".

In the next window, select Language and click Next.

Choose your own account, Better, that she had administrator rights, then enter the password if it is set when you enter the system, and click OK.

The following window should appear, select it in it "System Restore".

A recovery window will open, click in it "Next" and repeat the steps described in the paragraph above.

If you have Windows 8 on your computer, you can click F8 or SHIFT + F8 when loading, but the window additional options Downloads You hardly appear. It is best to use a system recovery disk or blood flash drive. You can create them on any other computer with installed Windows 8.

Follow the link and read the article how to restore Windows 8. Everything is described in detail there. You must have the following window. Then go along the way: "Diagnostics" - "System Restore"And select the desired recovery point.

Through the command line

In Windows, files that are responsible for the registry work are stored on the next way: C: (the letter of your system disk) / Windows / System32 / config. There is also a REGBACK folder there, it contains backup copies of all registry branches. They are updated by the system automatically, depending on the settings, every 5-10 days.

We need to do the following: Delete Default, SAM, Security, System, Software files, which are located in the Config folder, and replace them with similar files from the RegBack folder.

In the operating system, we will not be able to do this, as it will be necessary to replace the files that are responsible for its operation. Therefore, you need to use the additional download parameters, and open the command line.

In Windows 7, when loading the system, press F8. Next, you need to perform everything as described in the paragraph above. In the window "System Recovery Settings", Select "Command line". As a result, the command line will start on behalf of the administrator.

In Windows 8, open the command line using a combination. This is written in detail in the article: Safe Windows 8 mode. Read item: Go to safe mode Using the combination of SHIFT + reboot. When the following window appears, select "Command line".

If the computer does not turn on at all, due to changes in the registry, then read the item: Go to a secure mode using a system recovery disk (you can create it on any computer, with installed windows 8).

So, we launched the command line. Now I will enter the following commands there. At the end of each line, press ENTER. To begin with, create the Badreg folder on system disk, Copy all the files of our non-working registry. Then boldly delete the Default, SAM, Security, System, Software files from the Config folder, because we have their copies. And last, copy backups from the RegBack folder to the Config folder.

MD C: \\ Badreg
Copy C: \\ Windows \\ System32 \\ Config \\ Default C: \\ Badreg
Copy C: \\ Windows \\ System32 \\ Config \\ Sam C: \\ Badreg
Copy C: \\ Windows \\ System32 \\ Config \\ System C: \\ Badreg
Copy C: \\ Windows \\ System32 \\ Config \\ Security C: \\ Badreg
Copy C: \\ Windows \\ System32 \\ Config \\ Software C: \\ Badreg

delete C: \\ Windows \\ System32 \\ Config \\ Default
DELETE C: \\ Windows \\ System32 \\ Config \\ Sam
DELETE C: \\ Windows \\ System32 \\ Config \\ System
Delete C: \\ Windows \\ System32 \\ Config \\ Security
Delete C: \\ Windows \\ System32 \\ Config \\ Software

copy C: \\ Windows \\ System32 \\ Config \\ RegBack \\ Default C: \\ Windows \\ System32 \\ Config \\
Copy C: \\ Windows \\ System32 \\ CONFIG \\ REGBACK \\ SAM C: \\ Windows \\ System32 \\ Config \\
Copy C: \\ Windows \\ System32 \\ CONFIG \\ REGBACK \\ SYSTEM C: \\ Windows \\ System32 \\ Config \\
Copy C: \\ Windows \\ System32 \\ CONFIG \\ REGBACK \\ Security C: \\ Windows \\ System32 \\ Config \\
Copy C: \\ Windows \\ System32 \\ CONFIG \\ REGBACK \\ Software C: \\ Windows \\ System32 \\ Config \\
EXIT

After you enter the EXIT command, the command line window closes and the computer will reboot.

I hope one way will help you restore the registry in the Windows 7 or 8 operating system.

Rate article:

(3 estimates, average: 3,67 out of 5)

Webmaster. Higher education in the specialty "Information Protection" .. The author of most articles and computer literacy lessons

Related records

Discussion: 16 comments

I enter the command in the string as shown, for some reason it writes: "The system failed to find this path," what to do?

Most likely, DEFAULT, SAM, Security, System, Software folders are on another way, but not C: \\ Windows \\ System32 \\ Config.

Reply
1. And what to do?
  
  Reply
  1. You need a way to learn to the specified files. Do you have a 32-bit version installed or 64-bit discharge?

Many novice users wonder how to go to windows registry 10, 8, 7 or XP. How much do not go through the menu items "Start", the label to the registry in it is not found! How to open the registry in Windows?

The fact is that any rapid change in the registry can lead to disastrous consequences for your computer. So that inexperienced users do not have trouble, the registry has been hidden.

Give yourself a word that you will not make rapid changes in the registry to do not harm your computer!

Details about what is registryHow it is arranged, and how can it be used, you can read in.

For any windows version There are several ways to start a program in which you can change the registry settings (it is called " registry editor»).

Let's start with the latest Windows 10, and consider two options to access the registry.

Run registry editor - Method 1 for Windows 10

Click the Start button with the left mouse button (or the "Windows" key on the keyboard);
When the Start menu opens, type the command " regedit."(Without quotes);
At the top of the search menu, the "Regedit - execute command" appears, click on this item with the left mouse button;
If the registry editor is confirmed, click "Yes";

You will appear in the registry editor window, in which you can make changes to the registry itself.

Run the registry editor in Windows 10

Run registry editor - Method 2 for Windows 10

Press the "Start" button with the right mouse button (or the WIN + X key combination);
In the menu that appears, select "Run" (these two steps can be replaced with one combination of Win + R keys);
In the appeared window "Run" type " regedit."(Without quotes) and click" OK ";
In the start confirmation window, click "Yes";

The registry editor will appear, and it is possible to crime to make changes.

Visively see how to go to the Winows 10 registry, you can on this video:

How to open a registry in Windows 8 / 8.1

Detailed video instructions, how to enter the Windows 8 registry editor (8.1):

How to open a registry in Windows 7

To open the registry editor in Windows 7, you need to do this steps:

Run registry editor - Method 1 for Windows 7

Dial the command " regedit."(Without quotes);
Press at the top of the menu, under the inscription "Programs" on the inscription " regedit.»;
On the Run confirmation request to select the answer "Yes".

Run the registry editor - Method 2 for Windows 7

Click on the keyboard the combination of the Win + R keys (Hold down the Windows key and, without releasing it, press the R key);
In the "Run" window to type the command " regedit.
Confirm the launch of the registry editor with the Yes button.

Both ways to enter the Windows 7 registry editor can be seen on this video:

How to open a registry in Windows XP

In Windows XP, the opening of the registry editor is somewhat different:

Run registry editor - Method 1 for Windows XP

Click on the "Start" with the left mouse button;
In the right column, find the item "Perform" (both steps can be replaced with a combination of Win + R)
In the "Starting Program" window, write a team " regedit."(Without quotes) and press the" OK "button;

Run the registry editor in Windows XP

Run the registry editor - Method 2 for Windows XP (and not only)

Open the conductor (you can use the WIN + X key combination);
Go to the "C:" disk;
Open the Windows folder;
Locate the "regedit" file and run it.

And, of course, the video version opening the registry editing program in Windows XP:

The second way is suitable for all listed versions of Windows. Moreover, you can snatch a little:

Reaching the "regedit" file you can create a shortcut on the desktop And further considerably simplify access to the registry editor.

Details about what registry is and how it is arranged, you can find out.

Conclusion

Today you have learned how to go to the registry in all actual versions Windows OS.

In the amount typed three ways:

Search through the "Start" menu input "Regedit"
Using the "Run" and input "REGEDIT"
Opening the "Regedit" file located in the C: \\ Windows \\ folder

And one additional way : Reaching the "Regedit" file (third way), create a shortcut on the desktop.

In the next lesson, I plan to consider the save way ( reserve copy) Separate registry parts before changing them.

Interesting? Write in the comments, ask questions, and, of course, share a link to social networks And subscribe to news!

Copy is prohibitedBut you can share links.

For a long time I no longer wrote to the section "For beginners", so I think, enough to Filon. Thinking about the subject of the article, I decided to write about ways to enter the Windows registry editor. Although I write in each of the articles how to enter the registry. Better i will write everything possible methodsavailable in operating windows systems default. So what is the registry?

The Windows registry is a database containing all the settings and the parameters necessary for the operation of the operating system. In it are settings both hardware and software. Most changes in the control panel, editor group Policy and additional parameters Systems are recorded in the registry.

So, how to enter the Windows registry editor?

Login through the Utility "Run"

It is this way that I use in my articles, as he, in my opinion, the fastest and most convenient. We perform three simple actions.

Through the search in the Start menu

To begin with, consider example Windows 7, as she has old option Start menu and this option is suitable for older operating systems.

For Windows 7, Vista and B Oer Early Versions

For Windows 8 and Windows 8.1

Opening through Windows Explorer

Very easy way: you just need to find the desired file. in system folder. For this we go along the way:C: \\ Windows.We are looking for a file run it.

Windows 8 uses a wide demand among PC users. But not everyone knows how to open the registry editor. There are somewhat simple and effective ways To start it editing.

detailed instructions

Option 1

A quick command from the Win + R keys combination will open the window.

We write to the REGEDIT command there and confirm the action through approx.

Option 2.

Call the task manager by the known Ctrl + Alt + Del combination.

At the end of the procedure, we enter the already familiar request Regedit and confirm the action.

Option 3.

If you keep the mouse cursor on the right side of the screen, the so-called curtain will fall out, which we will need. It is looking for a search line.

Under the application item is a string of search, where we write the word regedit.

It remains only to activate the application.

Option 4.

In law upper corner Window My computer is a string of a search that we will need. There you need to record the command Regedit.

Among several shortcuts, you need to choose the one that is saved by the C: \\ Windows directory.

Option 5.

We again go to my computer and open the C drive.

Among the abundance of shortcuts you need to find a regedit with the type of application. Open it with double pressing.

These are the ways are available in order to visually see how to start the registry. This instruction is suitable for Windows 8.1. Each option takes only a few minutes.