16.10.2016

There are only two ways to buy a PC - this ready decision, that is, the acquisition of the already collected, "Started" system Blockor his independent assembly (Option is more profitable material and qualitatively, but for knowledgeable). Just in the second case and comes to help computer configurator online, and about what we will tell below.

Computer configurator online - This is a tool for self (virtual) assembly of a personal computer in order to further purchase or simply for the "Spent".

On the Internet there are quite a few resources, among them there are representatives of famous retail chains (for example, Yulmart), thanks to which you can "collect" a PC yourself.

On the site, the user can independently choose each item installed inside the system unit, its manufacturer, model, modification, performance and other quality-specifications. You can also choose the case and the operating system (its availability and version).

But the most interesting starts after virtual assembly: components can and need check for compatibilityAfter all, it is precisely this is the key to an efficient, productive and well-established computer. In addition, it allows you to learn the approximate cost of the self-collected PC, some even allow monitoring the market as a whole, choosing the most tempting proposals.

Below we will look at the most convenient and efficient online computer configurators with compatibility check components.

Configurator Yulmart.

On the this resource The computer configurator includes a sample in the following categories:

• Price segment;
• Motherboard;
• Productivity and processor family;
• Volume hard disk (HDD / SSD);
• Video card;
• The amount of RAM;
• Optical media;
• Availability / absence of a wireless network adapter;
• Sound card;
• Cardrider
• Housing, power supply;
• Installed OS.

After you select all components and the corresponding "packaging" for them will begin performance and Compatibility TestThe performance of the selected graphics core is tested separately. The ready-made assembly of Yulmart provides a warranty of 24 months.

ConfiguratorIronBook

List of components that you can choose for your computer on this resource For the most part, it is identical to Yulmart, and other online configurators. A small but pleasant bonus is the mark " Mandatory component", Which will serve a good tip for an inexperienced user.

Here is a detailed list of what you can choose for your PC in IronBook:

• CPU;
• Cooling (optional);
• Motherboard;
• RAM;
• HDD;
• SSD (optional);
• Video card (optional, someone and integrated is enough);
• Optical drive (optional);
• Cardrider (optional)
• Module wireless communication Wi-Fi (optional);
• Housing;
• Operating system (optional).

Compatibility check Components and tests of their performance are performed upon completion of the virtual assembly of the PC.

ConfiguratorBrandstar

Interface of this resource more modest, but we didn't come here for the sake of pictures. The list of components and software is as follows ("asterisk" mandatory elements are marked):

• CPU*;
• Motherboard*;
• Hard disk * (You can select SSD and / or HDD);
• Video card *;
• Housing *;
• Sound card;
• Optical drive;
• Additional equipment (card reader and Wi-Fi adapter);
• Operating system;
• Office software package;
• Antivirus software.

In the same way as on the above resources, after the user finishes the virtual assembly of its PC, it will be possible to start compatibility check.

Common to all the resources we told in this article is the display of the price directly in the configurator window, that is, adding each new element, the user sees changes in the total cost.

This can be finished. What computer Configurator online with compatibility test Use, of course, to solve you.

Many wish to collect gaming computer 2017, while putting in a small budget. But the matter is very difficult, because the cost of computer components is increasing every year, as well as the requirements of the games regarding PC performance. At the same time, I want to collect such a computer, the filling of which will remain relevant at least a few years, because it is unprofitable to invest in its modernization every year, and not everyone can afford it. In our material you will learn what details are most important in games and how to assemble an inexpensive game computer.

We collect the game computer 2019 do it yourself

CPU

First of all, you need to decide on the choice of processor - the most important element of the computer, which is responsible for all computational processes. You have to choose between the products of two world-famous brands Intel and AMD. It is recommended to find productivity tests on the Internet and compare the results of each other. The optimal choice in our opinion is intel processor Core i5 - its capacity enough for any games and shoots operating system.

The higher the generation of the processor, the better performance, Consider this when choosing. To assemble a powerful budget game computer, you can use i5 7500 - the almost most topical solution in a ruler, which perfectly copes with resource-intensive tasks. Of course, the Intel Core i7 processors will be better, but the increase in performance in them is not as big as overpayment. AMD Athlon. II X4 640 will be an excellent solution for assembly budget ComputerAlthough in its capabilities, it is inferior to Intel solutions.

Choose motherboard

You need to find a motherboard that will support the format of the selected processor. When it is selected, you need to pay attention to the processor connector (for example, the LGA 1151 connector is required to connect Intel i5). Also, the value of slots is also the standard, their number and frequency. Additional connectors may be present to what to pay attention to choose the motherboard with a suitable functionality.

RAM

Collecting Game Computer 2017 optimal decision The DD4 RAM will be the RAM with a volume of 8 or 16 GB. In the larger volume, simply no need, and so everything will fly. But 4 GB will already be not enough for modern games, especially since part of the memory is eaten by the system. The amount of RAM must be chosen on the basis of its budget - the more you put it, the faster the games will be loaded and the interface will work smoothly. But note that if in the future you will have the desire to expand the volume, then install the bar with similar frequency And preferably from the same manufacturer, otherwise it may be incompatible. It is better to choose the memory with the maximum frequency, its speed depends largely. Deciding how to collect an inexpensive game computer 2017, you need to make sure that the selected RAM standard is supported motherboard.

Note that if you install the RAM bar more than 3 GB, the operating system must have a 64-bit architecture. Otherwise, how much without memory, but will be available at no more than three.

Video card - the most important detail when assembling the game computer

The question is how to collect a good game computer, it is impossible to imagine yourself without choosing a video card, which is responsible for processing graphics in games. The video card and the processor are the most expensive parts from which the performance has most dependent in games. When choosing, it is better to read reviews, as manufacturers offer a huge variety of models that are greatly different in their capabilities. For a budget PC will be enough NVIDIA GeForce. 1050 Ti with 4 GB of memory. BUT B. lately With video cards, not everything is so simple - miners are being built, and if it can be found on sale, it costs it much more expensive than it should. This concerns the entire video card market. If you have a big budget, it is worth paying attention to the NVIDIA GeForce 1060, 1070 and 1080 cards - top solutions today by purchasing which you will get maximum performance.

Solving how to collect a gaming computer yourself, you can pay attention to the cheapest solutions from ATI or NVIDIA. When choosing, consider the connector to which the video card is connected. DDR5 leads - this is the newest format that is equipped with almost all motherboards. Therefore, it is better to stop your choice on it, DDR3 will eventually become increasingly popular with time until it does not get out. And remember that the larger model number does not always mean that it is better. You need to watch reviews and comparison of performance tests on special sites.

Choosing a drive

The optimal option is to date the use of an SSD disk in a pair with standard. The first system is installed, which gives tangible increase Performance. But in connection with the high cost, it will be unprofitable to buy SSD large volume, and therefore, with time you can no longer be able to store all files on it.

Here and saves the standard hDDwhich is much cheaper. So, for 3000-4000 rubles you can buy a hard drive for 1 TB, while for the same amount you can find SSD to a maximum of 128 GB. Again, deciding how to assemble a good gaming computer inexpensively 2017, you should read the reviews and pay attention to such a characteristic as the speed of rotation. It must be at least 7,200 rpm. From this parameter, the speed of recording and reading data depends. A quick drive contributes to the accelerated enable game, and also reduces the time of their installation.

Power Supply

Thinking on how to collect the game computer 2017 itself, you need to calculate the required power of the power supply. To do this, see the characteristics how much energy consumes each piece of computer, fold the amount and add about 20% just in case. Most food blocks are equipped with 20 or 24-pin connectors, note that they are comparable to your motherboard. You should not take the power supply bundled with the case. As a rule, it is not high quality. The game computer will require an option with a capacity of at least 500 W.

Housing

The case must be not only beautiful, but also contain all the connectors you need. Special attention needs to be cooled, because even the most powerful gland game will slow down if it overheats. Some enclosures are installed 80 mm fans, in others - 120 mm. The top solution is a liquid cooling system, but it is unnecessarily expensive, so it is better to stop your choice on the housing with 3-4 powerful coolers. The more powerful filling, the more effective there should be a cooling system.

3dnews has a large and diverse audience. The resource is attended by both mothers enthusiasts who gathered far from one PC and readers who are just beginning to delve into all the wisdom computer equipment. The test laboratory is elegant and accelerates them to serious frequencies, to study the durability of drives, in modern games and for the purchase of unusual iron abroad, but at the same time does not forget about inexperienced users. So there was a rubric "", in which various configurations of system units are offered. After acquaintance with comments and personal communication with the readers of the site, it became clear to me that it was time to tell in detail and show beginners, as the components offered in the article to collect in a single whole. That is what is dedicated this material.

⇡ Selection and compatibility of components

Sometimes it is possible to determine the set of components from which your PC will consist, heavier than to assemble the system unit at home. You can find on sale great amount processors, motherboards and video cards. It is possible for a long time to argue about which brand is preferable, as well as to discuss on the topic whose graphics is faster, the main thing is that with the final choice of configuration, all iron is fully compatible with each other. By the way, I propose such systems to "". If this rule is met, the assembly of the system unit is not much different from the game in the designer, in which all the details are suitable for each other. Sizes of components, mounting hole parameters and connectors - All components of the computer are strictly regulated, and therefore, for example, it may not be such that the RDR3 RAM to suddenly earned on the motherboard with DIMM slots designed to install exclusively DDR4 modules. You just can't install them in the appropriate connectors.

For the full functioning of the system unit, you must purchase the following devices: motherboard, cPU, cooler, RAM, hard disk or solid State Drive, video card (if the CPU or motherboard does not have a built-in graphics core), power supply and case. Additional components include optical drive, as well as all sorts of discrete devices: Network and sound cards, Additional cooling.

The motherboard is the basis of any computer. It is from it that it depends on what processors will be used how many RAM modules, video cards and drives can be installed. Dimensions system board Play an important role and when choosing a case. On the this moment Among the motherboard, the Solutions of E-ATX Forms (305 × 330 mm), ATX (305 × 244, 305 × 225 or 305 × 199 mm), MATX (244 × 244, 244 × 225 or 191 × 188 mm) and mini-itx (170 × 170 mm), although the sizes themselves themselves are much larger. Form factor is always indicated in specifications enclosures.

The "dwelling" itself for components is also divided into types depending on the size and form. As a rule, the more computer case, the more productive iron we can install it, while ensuring quality cooling All components of the system. Dependence, however, nonlinear - Practice shows that compact buildings A volume of 7-10 liters is quite realistic to collect a powerful gaming PC. Just will simply have to close all components.

Among PC buildings are the most popular models of four types: MIDI-Tower (examples - and), Full Tower (), Mini-Tower () and Slim Desktop (). Naturally, the device is more compact, the less landing places on the installation discrete video cards, drives and cabinet fans. For example, in Node 202, 10 liters can be installed exceptionally 2.5-inch hard drives and SSDs. All these features, a conscientious manufacturer indicates the technical characteristics of the device.

When choosing components, pay attention to other restrictions that any computer case possesses:

• maximum height of the processor cooler;
• the maximum length of the video card;
• maximum power supply length.

Before buying equipment, be sure to make sure that all devices are compatible with each other, do not conflict and just fit in the computer case. The simplest logical chain that will not allow you to purchase inappropriate components in each other looks like this:

• We are determined with the model of the central processor.
• Choose a motherboard with a suitable CPU socket for this.
• We study the list of compatible equipment of the motherboard on the official website and select a set of RAM.
• Choose drives that are compatible with the motherboard.
• We select the video card, power supply, processor cooling and housing in which all components will fit.

Again, the reduced sequence in no case is an axiom. Since the assembly of a PC is always a creative process, then the sequence of iron selection may vary. For example, you liked a certain body and I want to assemble the system of my dream only in it. Or you already have any components on your hands, and you need to purchase everything else.

If the system unit will use a non-listed water cooling system for a processor or video card, then additionally, it is necessary to know the dimensions of the supported radiators, as well as the places in which they can be installed. Obviously, the seating places to install their coincide with the fans of fans. Single-section radiators are usually installed on the rear wall, two-section and three-section - on top and / or front.

For writing this material, I, based on the above sequence of components, used the following set of devices:

• aMD Ryzen 7,1700 Central Processor, AM4, 3.0 (3.7) Sockets;
• mSI X370 Gaming Pro Carbon Motherboard, Socket AM4, X370 chipset;
• rAM Kingston Hyperx. Fury (HX426C16FR2K4 / 32), 4 × 8 GB, DDR4-2666;
• solid-state drive;
• video card;
• cOOLER MASTER MASTERWATT, 500 W;
• cOOLER MASTER MASTERBOX 5 MSI EDITION;
• cOOLER MASTER MASTERLIQUID 120 processor cooling.

As you can see, when preparing this material, the most common form factors are used for motherboard and MIDI-Tower for the case. Similar options are offered in the "computer of the month" - because such a size is the most versatile and enjoys the greatest popularity. True, I can not say that the assembly process in Mini-Tower and Slim Desktop enclosures is fundamentally different. Just the requirements for the selection of compatible iron compatible with each other are noticeably higher.

Additionally, I note that with the selection of devices, all modern trends are taken into account. The main drive is the Kingston Hyperx Predator model with an interface PCI EXPRESS.. And the choice in favor of Cooler Master Masterbox 5 MSI Edition is made due to the possibility of installing the power supply unit at the bottom of the chassis, as well as the presence of fastening for drives on the barrier wall. Plus, unpaved liquid cooling systems are very popular. Cooler Master Masterliquid 120 is a bright representative of single-section "Watermarks", which are already ready to work out of the box. The remaining components are selected in such a way that a productive system unit for work and entertainment is ultimately obtained. Optical drive has not been used. In my opinion, in 2017 it has no need, and Cooler Master Masterbox 5 MSI Edition (as well as many other new buildings of this format) is deprived of landing places to install devices in 5.25-inch compartments.

To build a system unit, you will definitely need two crusades with different diameters of the slot, nylon ties and nippers. It may be useful to passage - in cheap hulls, the threads are cut into the eye, as well as a double-sided adhesive tape, degreasing liquid and cotton sticks. In order not to scratch the case and do not damage the motherboard, I put all the components on the rubber rug. The antistatic bracelet or gloves will also come up with beginners, but, honestly, more to give confidence in own power. Since the assembly of a PC is, including the connection of small connectors to the motherboard, then without good lighting or flashlight at hand it is not necessary to do.

⇡ Step number 1. Installing a processor and RAM

The motherboard's manual is always a description of the installation of all the main components and connectors. Newbies, keep this book with you. The sequence of steps to assemble the system unit may vary depending on the type of components. For example, sometimes the processor cooler is better to install immediately, and sometimes in the penultimate or last place. Even before fixing the motherboard in the case, you should establish a central processor and RAM into the appropriate nests.

You will be aware that constructively, AMD and Intel processors differ significantly from each other. So, AMD chips protruding contacts, referred to as "feet" glands, are located directly on the substrate from the textolite. But Intel chips are not available with such elements - for these CPU Contacts Posted directly in the motherboard socket.

AMD chips are installed very simple: raise the lever, put the processor on a plastic substrate, lower the lever.

As for Intel solutions for LGA115X platforms, a similar technique is used here: along with the lever, we raise the clamping frame, install the processor, lower the lever and the clamping frame.

In case of intel platforms LGA2011 and LGA2011-V3 To raise the clamping frame, you will need to release two levers from fixing grooves.

Please note that all central processors and motherboards are equipped with pointers and the so-called fool protection. In principle, you will not be able to install a chip in the socket in a different way, so when assembling a computer, never use force. Protection against incorrect connection is equipped with all items in the system unit. In addition to the CPU, you will not be able to connect some other way the power supply cables, enclosures, fans, discrete devices, drives, and RAM. More precisely, you can, but for this you will need to make maximum effort. I think about the consequences of the wrong installation of PC components once again, it is not worth talking.

After the central processor in the DIMM slots, usually located on the right side of the central processor, I set the RAM. MSI X370 Gaming Pro Carbon supports DDR4 Standard RAM, on pCB Smoked four ports at once. In some mother-in-law, there may be only two (most often it is either the cheapest devices, or the MINI-ITX form factor solutions, or), in models for platforms LGA2011 and LGA2011-V3 - eight. Usually on textolite all DIMM slots are marked.

Most modern processors AMD and Intel have two-channel RAM controllers. Therefore, in motherboards and used either two or four DIMM slots. Therefore, the optimal is considered to be the installation or two or four RAM modules. In the first case, the RAM is installed through one connector. Some motherboards provide special pointers. For example, in MSI X370 Gaming Pro Carbon, the modules are installed in the DIMMA2 and DIMMB2 slots - precisely, in this case, the RAM will work in two-channel mode. In other mats, there are inscriptions type, - in such cases, to ensure the operation of a two-channel module mode, it is necessary to install in the DDR4_A1 / DDR4_B1, DIMM_A1 / DDR4_2 and DDR4_1 / DDR4_2 slots, respectively.

"Fool protection" from RAM

I have already said that it is not possible to incorrectly insert the operational memory, since a jumper is used in the DIMM connectors. It applies, among other things, so that the user cannot "squeeze" in the motherboard supporting DDR4, the modules of another standard.

RAM board cards are fixed using latches located along the edges of the DIMM slots. In some motherboards, such latches are located only on one side of the connectors. This is done so that the user can freely change the RAM modules without removing, for example, with the video card.

After installing the CPU and RAM, you can immediately install the processor cooler, but only if a small radiator is used in its design. The application of the overall cooling system will make it difficult to install the motherboard, as well as the subsequent wire connection. The photo above shows examples of installing box coolers - so called CO, which are sold along with the processors. Coolers for aMD Platforms AM3 + and FM2 + are attached with the help of plastic "ears" - a special metal bracket with eyelas is cling to them. Boxing cooling for Ryzen chips is installed differently, here you have to work a screwdriver: first remove the plastic fastening, and then fasten the radiator to the bochplate. The cooler for Intel processors is attached using plastic clips: set the radiator on the CPU and click on the latch until you hear the characteristic clicks. In general, in the case of installing boxing systems of cooling problems, even newbies should not arise.

The sole of some coolers is already applied to the thermal paste - its use is noticeably increases the efficiency of heat removal from the CPU. In any case, the thermalcaste always comes with a processor cooler. For example, with Cooler Master Masterliquid 120 there was a small tube, which nevertheless should be enough for 3-4 times. Please do not forget to remove protective film Before installing the cooling system, if available on the basis of the device. The process of applying the thermal paste is described in paragraph number five.

But the installation of other coolers is individually made, as each manufacturer uses a fastener set of its own design. Therefore, right away from the package from the instructions. Most devices are equipped with universal mounting mechanisms that are suitable for aMD processorsand Intel. True, the response part of the attachment, which must be previously fixed on the board, different platforms are different. The list of supported equipment, as well as the size of the cooler is always indicated in the specifications. And yet there are enough models that are compatible with only one specific platform.

Once again: if the device is large or, as in my case, a non-listed liquid cooling system is used, then at the first stage it is enough to fix the rear plate and frames on the board, for which the cooler radiator will be kept. We will install the radiator itself in the penultimate queue, after all cables will be connected to the motherboard. Yes, in Cooler Master Masterbox 5 MSI Edition enclosures, a barrier wall has a window to access the cooler with a bequeer, but it's not always convenient for them to use it.

If we talk about air processor coolers, the coolers of a tower type are most popular. Depending on the platform used and on the specific model, the CO radiator can be installed in two positions. In the first case, the cooler fan will blow air through the rear wall of the case, in the second case - through the upper one. The correct installation option determines the form of the body used. So, in the case of Full-, Midi- and Mini-Tower format models, it is better to use the first option. It is important that the CO did not overlap the expansion slots, and also did not rest in the elements of cooling the motherboard nutrition subsystem. For example, MSI X370 Gaming Pro Carbon does not conflict even with the largest turntable coolers. And a wide processor cooler can prevent the installation of RAM with high cooling radiators. Therefore, it is better to use compact RAM kits, such as Kingston Hyperx Fury, such as, or 100%, make sure that the CPU cooling and memory will not conflict with each other.

Our assembly uses the cooler master Masterliquid 120 liquid cooling system, so its installation will be carried out in the penultimate queue (step No. 5).

The fans of the cooler and enclosures are connected to the motherboard using 3- and 4-pin connectors. MSI X370 Gaming Pro Carbon of such elements is planted at once six pieces, which is very convenient. The number of such ports is not regulated in any way, but at least two connectors on the board must be present: to connect the CPU-cooler fan and for the system (body) impeller. All connector are marked accordingly: CPU_FAN, SYS_FAN (or CHA_FAN). Sometimes a 4-pin connector intended for the processor cooler is isolated by another color (most often white). And in the boards of medium and high price ranges You can find the PUMP_FAN connector. It is designed to connect the rotor of water cooling pump, but at the same time fits both for any other fans. Just through this port is transferred to the current of greater strength.

The connector with three contacts does not allow you to adjust the fan connected to it. But the 4-pin port has such an opportunity, and modern motherboards are able to regulate the rotational speed of "turntables" both with pulse-pulsed modulation (fans with four contacts) and without it (fans with three contacts).

With a shortage of connectors for connecting body fans, all sorts of adapters will be helped. This can be a conventional splitter that allows you to connect to one 3- or 4-pin port of several imperts at once. Or the cable connected to the Molex or SATA connector. And there are also such devices as, although their popularity has never been high. However, it is originally equipped with simple (most often three-position) controllers controlling the frequency of rotation of the fans using a decrease in voltage from 12 to 7 or 5 V.

In the case of our PC, there is no need for additional adapters and splitters, as it is necessary to connect only two fans to the motherboard and one housing impeller.

⇡ Step number 2. Installing the motherboard and connect the housing connectors

Now that the central processor and the RAM are connected to the motherboard, it's time to start working with the case.

For a long time in the Tower-enclosures, the power supply unit is installed mainly below. It is made from both aesthetic considerations (it is more convenient and easier to lay wires), and for the sake of increasing cooling efficiency, primarily the PSU itself. However, build models are found on sale and with other options for installing BP.

Seats for installation of the power supply, 2.5- and 3.5-inch drives

In the Cooler Master Masterbox 5 MSI Edition design, a small salad basket is provided, in which two 3.5-inch are placed hard disk. More compact 2.5-inch drives are attached on a barrier wall.

Installing the motherboard begins with fixing the I / O-panel plug in a rectangular hole specifically allotted for this. You will have no difficulties. The plug always comes complete with the motherboard.

Fasteners are always supplied with the housing. Together with Cooler Master Masterbox 5 MSI Edition, I found three types of screws, as well as plastic clips for installation additional fans. In other housings, fasteners may be greater. In some models, the screws required to install the motherboard are already cleaned into the appropriate threaded holes on the barrier wall. In the case of Cooler Master Masterbox 5 MSI Edition, this procedure will have to do yourself.

So, the housing supports the installation of MINI-ITX, MATX, ATX form factors and even E-ATX. On the wall are present legend (A similar memo is used in many models). Since the assembly uses an ATX form factor, it is necessary to screw all eight strut screws into the threaded holes marked with the letter "A". However, not all motherboards relating to this si-part correspond to the parameters of the length and width of 305 × 244 mm. For example, already MSI X370 Gaming Pro Carbon for 19 mm, so it cannot be fixed in the housing along the right edge. Consequently, when connecting the wires from the power supply or installation of the memory modules in the DIMM slots, the textolite will be fed. Take care of these items in such cases.

After the motherboard is fixed, I personally connect the controls and connectors immediately front panel Cases. On the front wall Cooler Master Masterbox 5 MSI Edition replaced uSB ports 3.0 A-type, two 3.5 mm mini-jack for headphones and microphone, as well as the key to turn on the system and forced reboot. Difficulties may occur only when the controls are connected - it is a bundle of wires with POWER LED and POWER LED + connectors (transfer information to the computer status indicator), Power SW (responsible for the power key), HDD LED- and HDD LED + (transmits information indicator of the storage activity ), as well as Reset SW (responsible for the operation of the forced reboot button). Some elements may not be on the "face" of the housing, since not all devices are equipped, for example, by the RESET key or LED indicators. However, in all cases, these connectors are connected in a specific sequence, as shown in the table below. Just the manufacturers of motherboards use their own designations in essence of the same contact site: JFP1 in MSI Mattags; Panel in ASUS; Panel1 in ASRock and F_Panel in Gigabyte.

Power LED +.	Power Led-	Power SW.	Power SW.
HDD LED +.	HDD LED-	RESET SW.	RESET SW.

In addition, contact sites may be present among the internal connectors on the motherboard to connect USB 3.1 and USB 2.0 ports, RGB-tapes, TPM module, FP-audio and speaker.

Assembling the game PC in the online configurator Hyperpc, even a newcomer. Specify the game platform, and the service will offer components for stable collaboration, drives, cooling systems and peripherals. And professionally collect computer to order in Moscow, our engineers can. When assembling a computer in the HyperPC system unit configurator, heavy games are recorded - this is a great helper to create a powerful platform with the best components of 2018. When analyzing compatibility, manufacturers recommendations are taken into account, the results of load tests and experience of cybersports.

Pick up the configuration

Designer of the system unit with compatibility check estimates not only the type of slots, tires, ports and connectors. All components are checked for consistent work with each other, so even with a limited budget you can collect good computer with high performance. Start by defining the platform, and the configurator will offer affordable components to build a game PC to order.

Online assembly system unit

You collect a computer online - Hyperpc implements your project to life! Specify the video card, processor, motherboard and other system parameters. Calculator will show the cost of the configuration, taking into account the assembly and settings. For each component there are tips, they will help make a decision. Immediately you can order the periphery, installation of the operating system and other software, modding and secure computer overclocking. You can create multiple configurations and compare them with each other.

PC configurator

For each gaming platform, components with different characteristics are offered - from the initial level in its segment to top iron. There are components of different manufacturers in the system unit designer with compatibility verification, so the selection of the game computer is not limited. The order will go into production immediately after confirmation on your part. If there are doubts - at your service expert assistance to HyperPC employees who will help to assemble the 2018 game computer for confident conquest of game vertices.

For those who want to buy a PC, it will be very convenient to assemble a computer online. The idea is pretty simple - there are all components of the computer in online stores, that is, and so on.

Therefore, you can take specific model This component, buy it and assemble a single computer from this.

But the problem is that not all models of PC parts will work well in combination with each other.

Content:

compDay.ru.

compDay.ru is an excellent online store for the sale of computer equipment. The advantage of this site is that the range is very large here.

This technique, which is not available, will not be able to participate in comparison, and, accordingly, will not be able to become part of the future computer.

But due to the fact that there are always so many products here, each user has a great opportunity to collect a pretty good working machine in online mode.

The process of using CompDay.ru service looks like this:

1. First you need to go to the "Designer of the Future Computer" page (here is the link).

Select each component is simple enough. For example, choose the processor model. To do this, in the appropriate section, click on the drop-down list, where three drops are initially worth.

Again, for example, choose a rather old, but a reliable Intel Core i3 processor. As you can see, also divided into categories depending on the sockets.

It is also convenient that its price is worth near each available model.

3. Now the selected processor will appear in the block on the right.

In the same way to do with the motherboard, rAM, video card, cooling system and other PC components.

If you do not want to choose some part, just leave there three dashes, that is, do nothing. Gradually, a future car will be collected in the "your computer" block.

Below will be written its value. You can click on the "Order" button so that CompDay.ru specialists collected a computer with selected components.

Fig. 2. Assembled computer on the Computer Search page

If some selected components are incompatible, the site specialists will tell you about it. In some cases, they do not advise you to choose one or another set of components.

In any case, the constructor of the site compday.ru is very convenient to use and easily, even beginner users will be able to understand it.

Each user can make a screenshot computer collected Or simply print the selected set of components and together with this go to the nearest electronics store.

In addition, the same components can be purchased in other Internet trains. And now consider another constructor with a similar scheme of work.

edelws.ru.

Another very much good resourcewhere there are many recommended (ready) computer configurations.

In addition to the possibility of selecting parts of the PC, there is a display of the characteristics of the future machine.

In particular, you can see computing power, cooling efficiency and how much. In general, quite comfortable and, again, just.

To take advantage of the edelws.ru designer, do the following:

1. Go to this service page (here it is).

2. First, let's try to use the designer, and then consider how to use "Recommended configurations".

The "Indicators" tab is responsible for the designer. Here, too, everything is divided into parts. For example, I will also start your choice from the processor.

To add it, click on the corresponding button under the inscription "Processor". On the right will appear the panel with accessible processors.

Fig. 3. Adding a processor on the Designer page edelws.ru

3. After adding a processor, the Adder page will appear on the screen. This makes it possible to read more detailed information about him.

Fig. 4. Device information when adding such on Edelws.ru

4. In the same way, you should enroll with the cooling system, RAM, and other components.

Near each of them there is a "Add" button. In the course of adding, pay attention to the change in the characteristics of the future computer at the top.

Fig. 5. The process of collecting a computer using the designer edelws.ru

5. Also, in the course of adding devices on the Designer page, information on all of them will be displayed. When the computer will be assembled, you can click on the button "Collect and buy".

Then EDELWS.RU specialists will collect PC for you and send it at the specified address.

6. In addition to manual collection, you can also use the section "Recommended configurations". To do this, go to the appropriate tab at the top of the designer page.

A list of available configurations will appear in the drop-down list. You can click on one of them.

The main indicator for the choice in this case is the price of the computer. After clicking on the configuration, a list of devices included in its composition will appear.

Any of them can be changed by clicking on the appropriate button under the device. If you wish, you can also reset the configuration or save it (there are also buttons for this).

It is also interesting that the site edelws.ru allows you to assemble a computer "under the game", and under a specific, for example, World of Tanks or GTA 5.

There are also graphic stations and PCs for work. All this is possible using the appropriate tabs at the top of the site window.

Fig. 8. Ready computers of the site edelws.ru

In general, we have a really well-worked designer.

ironBook.ru.

ironBook.ru is a rather popular and promoted online store of computer equipment.

It is worth saying that an interesting trend is now observed, according to which the average site for the sale of computer components can become really cool if adds a PC constructor page.

In general, this secret was used by the IronBook.ru website.

The assortment of the store is also quite wide, so there is something to choose and collect really quality computer. Let us turn directly to the use of the designer.

To do this, you need to do this:

1. Go to the RU Designer page (here it is).
2. Further the principle of action is the same - there are components, such as a processor, cooling, and so on, and all this needs to be selected. To do this, each of them has a button "Select Component". After selecting, you can click on the "Replace" or "Delete" buttons.
3. After all the components are added, you can click on the "Collect" button on the right. This will lead to the fact that your order will go to the RU store and in the shortest possible time experts will collect the selected computer and will send it to you.

Fig. 9. IronBook.ru designer page

It is useful that this site also has ready-made configurations. They can be seen in the block on the left. There you can find a PC for work, a gaming computer and many other options.

You can choose the one that will suit you most.

In addition, under the "Collect" button there are three more links. The first of these allows you to print the collected configuration.

With this material you can also go to the nearest store and buy all the selected technique there.

The second allows you to find out what the specialists of the website IronBook.ru think about the computer collected by you.

In some cases, they can advise to take a ready-made configuration, and in others - to say that your PC is quite suitable for the stated tasks.

In general, IronBook.ru is a really useful site that will help you make a high-quality work machine.

meijin.ru.

Finally, consider another wonderful configurator, which allows you to take a ready-made project and make your computer from it or collect PC from scratch.

It is very good that on this site you can immediately choose what you need a computer, and determine its cost. To do this, there are appropriate fields at the top of the site.

The cost can also be installed using the scale slightly lower. When these parameters are specified, it will be easy to click on the "Find" button.

Fig. 10. MEIJIN.RU configurator pages hat

After that, the above-mentioned scale will feature available options. They are denoted by vertical lines.

Moving the slider to each such line, you can see the proposed configuration. Below are the devices included in its composition.

If you click on the "Change" button near the component of the computer, it will be possible to change it to another.

At the same time, all devices are divided into categories - "Computer configuration", « Software» and "Peripherals".

They are presented in the corresponding constructor tabs.

Fig. 11. Found Computer Configuration

If you decide not to take a ready-made configuration, but to assemble your from scratch, it's still easier.

On the Designer page (hereinafter, it will be possible to immediately go to the aforementioned tabs of the categories of PC devices and by clicking on the "Add" or "Replace" buttons near each component, gradually collect the work machine.

Fig. 12. Select devices on the Meijin.ru designer page

The collected configuration in this case can also be printed in the form of a list or screenshot. There are no built-in features for all this on the site.

But without this, the constructor Meijin.ru looks quite efficient and spectacular. The range is also quite wide and will delight the eyes of even the most experienced users.

Below you can see the video review of the designer IronBook.ru.

How to assemble a computer online? Computer configurator online

Collect computer online is quite simple. It is enough just to find an online store, which implements a computer configurator online with a compatibility check of components. There are no prompts in such configurators, but only a hide is made from the list of incompatible with the already selected configuration of components. For filling, several fields are offered, in which the main components of the system unit are selected, ensuring the full performance of the computer.