How to set up MMS for LDJ. I can not send MMS from Android: how to configure for different operators. Customize MMS on android on your own

Articles and Lifehaki.

Here will come a graphic message, and it does not always work. But in general, the question is how to open MMS in the phone, has long been a problem for most users.

Any operator mobile communications Provides this service., sends settings to the phone, if the phone supports this feature.

And then if if the phone is monochrome, without polyphony, it is quite old, does not support this function, then you can hardly open this message options on it.

Setting function

• First of all, you should make sure that your phone supports GPRS / EDGE. Only in this case, the reception and sending MMS messages can occur. If you are not sure about your phone's ability, then instructions on your device to help you.
• The next step is the call to your operator. Upon personal conversation, ask you to send you the settings on the phone or, following the voice prompts, "Alone" ask them to send them.
• For example, MegaFon is enough to receive from you a message with the text "3" to number 5049, MTS will accept your empty message to the number 1234 or after your call to 0876 ( free call It will) send you the necessary settings for MMS.
• Beeline connects such a default service to all its subscribers. However, if this did not happen, it is enough to send a request to * 110 # 181 #.
• You will come to the phone the usual message to the phone in which there will be settings. There will be proposed to save the settings, and the password is written to activate. Therefore, keep the settings on your phone.
• They will automatically appear on your phone, if it supports this feature. After saving all the settings, turn off the device, wait a bit. And turn on the phone again.
• If everything was correct, now on your mMS phone Will and open, and send.

How to open MMS

• If MMS came to you, and you can't open it, then check the settings first. You may have come back to standard settings For some reasons.
• And everything sent by the mobile operator and saved on the phone can be lost. Therefore, reappoint you to send the settings.
• MMS also opens, as well as regular messages. All their difference is that they can contain images, videos, melodies or large quantity Symbols.
• If it does not open you, check the spam settings so that there is nothing listed. And also make sure that the method of receiving and sending MMS is available.
• If you think that everything is in order, but still does not open MMS, then go to the nearest center with your operator, ask for the center of the center to help you figure out and set up everything.

At the modern level information technologies Sending multimedia messages between subscribers, it would seem have already been outlived its popularity. At the same time, in the absence of access to the wireless Internet, this method of exchanging information becomes the only alternative. That is why it is important to know any user to know what to do if the question arises: "I can not send MMS from Android" and how to solve it.

Not always problems with sending or receiving messages are related to the technical malfunction of the phone. This probability should not be completely excluded, but it is better to better perform preliminary diagnosis and network settings. It should be borne in mind that for the new SIM card, the settings come automatically, when using it in the smartphone. If your SIM card has been working for many years, such a function may be lost for it. It is also worth taking into account other possible causes of failures.

Why this function does not work:

1. For some regions, this service is not provided. To clarify the information, it is better to contact the representative of your cellular communications directly.
2. Also, the operator needs to request automatic settings. To do this, it is important to inform the exact model of your phone. After receiving data in a separate message, activate the service according to the attached prompts. If your smartphone is provided by the use of two sim cards, the setting is carried out separately for each number.
3. Your addressee may have another tariff plannot supporting this feature or using other network parameters.

Often automatic updates It is impossible to use, or they work incorrectly. For such cases, it is advisable to independently configure the communication parameters. A similar algorithm provides some differences for different operators.

Solving this problem

If it is impossible to take advantage of the opportunity automatic setting network parameters, everything is required independently. For this, it is important to adhere to the above algorithm of actions, focusing on your model of the phone and the selected connection.

Stages of manual network parameters:

• In the Smartphone menu section, you need to find "Settings".

• In this list, find the category " Wireless networks" Communication parameters, including data transfer and use of the wireless Internet, are indicated here.
• You must activate the "Data Transfer" item if it is not active.
• Return to the "Wireless Network" menu and find access point. Usually the phone will give two options for connecting, one of which will be responsible for mobile InternetAnd the second is directly for the possibility of sending multimedia files.
• For your phone with two SIM cards, you also need to specify the number to which the service will be connected.

If it is impossible to independently configure you can contact your operator at the specified number or visit service center (Representation) personally. For a specialist of the center of communication, such procedures will take a minimum of time and will not submit difficulties.

Not sent from the tele2

If the Android is not sent by MMC in the "Tele 2" subscribers, it is necessary to check the correctness of this information. You should also ask your subscriber in advance about setting up a similar function on its device.

How to configure messaging:

1. Call "679" to operate according to the instructions received.
2. Sign up to the "Personal Account" on the resource, after which it will be familiar with the settings section by connecting the service.

With the ineffectiveness of the manipulations carried out, it is worth using manual input. In the relevant sections it will be necessary to enter the specified information.

Pattern for filling:

• Name - come up with yourself.
• APN - MMS.Teleru.
• MMSC - http: // mms.tele2.ru.
• Proxy - 193.12.40.65.
• Port - 8080 (9201).

After making information, you must restart the device, as well as check the sending and receipt of messages.

Difficulties in sending messages for MTS

MTS subscribers use a similar service after activating a function in several ways.

Performance algorithm:

1. On the short number "1234" send an empty SMS field. After that, also by SMS - information will come network settings.
2. If you are able to access the Internet through a PC, it is better to start your account on the company's website providing similar communication capabilities. This will allow you to know the latest news and connection promotions, follow your expenses or order a tariff change. Also in the "Internet - Assistant MTS" section you can order a service connection. Address of the site of the site: https://ihelper.mts.ru/selfcare/.
3. For direct communication and refinement of interests you can also resort to the service feedback On the site, but you can call the phone "0876" and get oral instructions for such cases.

If it is impossible to apply the options described above, it is advisable to independently enter information in the specified section.

When manually input is used:

• APN - MMS.mts.ru.
• Login (username) - MTS.
• Password - MTS.
• MMSC - http: // MMSC.
• Proxy - 192.168.192.192.
• Port - 8080 (9201).
• Access point type (APN) - MMS.

By filling out all sections, be sure to restart the smartphone so that the changes made are preserved and updated. After that, check the send function: send any multimedia file to the nearest friend's device or relative. If it is impossible to execute or if the screen writes a failure, repeat these actions or check the correctness of their execution.

Can't send MMS with megaphone

MegaFon subscribers are also available for sending and receiving multimedia files. For this, used also different methods Connections, and in the appropriate menu sections, specify the information below.

When manually, it is indicated:

1. Name - come up with any suitable.
2. APN - MMS.
3. Login - Leave empty.
4. Password - leave empty.
5. MMSC - http: // MMSC: 8002.
6. Proxy - 10.10.10.
7. Port - 8080.
8. Access point type (APN) - MMS.

Registration of your account is carried out on the official website: http://moscow.megafon.ru/help/settings/. If the option is preferable to obtain information in SMS, you must send a message to the number "5049", and the interaction with the operator is carried out using direct number "05002".

Online Beeline Unable to send or receive a message.

No less popular Beeline operator also took care of the possibilities for its customers. For this, there is an official site with the possibility of personal registration and receipt of the information about new tariffs and services of the company. It is located at: https://uslugi.beeline.ru/. Manual entered parameters will also change somewhat.

When manually entering data uses such parameters:

• Name - come up with any suitable.
• APN - MMS.Beeline.ru.
• Login - Beeline.
• Password - Beeline.
• MMSC - http: // MMS /.
• Proxy - 192.168.94.23.
• Port - 8080.
• Point Type (APN) - MMS.

Communication with the operator is carried out by free short number "060432". If none of the proposed options "does not work", it is advisable to contact the center of Beeline personally.

What to do if you write a failure when sending MMS with Android

Among possible causesWhy not sent MMS from android, you can also select some software malfunctions. Despite the fact that the use of android usually does not represent similar problems, you should know the possible algorithm of actions and for such a case.

The main causes of faults and ways to eliminate:

1. File infection with viruses. As prevention, you can advise the preliminary installation of a good protective program. If the problem has already appeared, you need to scan the system and delete a possible threat.
2. Minor system failures can be spontaneously or as a result of other problems. Simples are eliminated by restarting the device or reset the settings to the factory. In case of serious problems, you may need to flash a smartphone that is better to entrust the service center specialists.
3. Mechanical failures. Usually this kind of problem occurs when unauthorized changes in the specified network parameters. To correct such errors, it suffices to check the entered information.
4. Installation special applicationslimiting the amount of information transmitted. It is usually convenient for contract subscribersor when used on the child's phone. At the same time, such a software can block the transfer of any files including.

Typically, the listed malfunctions in the smartphone do not affect the data transfer function, but in some cases the problem may be in this. If the phone is under warranty, the easiest way to contact the service center. For relatively old devices, you can perform diagnostics or repair. It should be noted that similar problems Uncritical, but may indicate more serious problems that are negatively displayed at the work of the gadget.

Customize MMS for all operators

Before sending the selected file, make sure that its size does not exceed 500 KB (for the subscribers of the same network) and 350 KB (for sending for another operator). Usually, modern gadgets automatically climb the file to the desired parameters, but it is better to check it in advance. In addition to the above problems, can be modern exceptional situationsFor example, when this possibility is not provided for precisely for your area of \u200b\u200bresidence. Messages in this case can delay or come in unreadable.

Also before shipment, you must make sure that the entered number is saved in an international format (for the Russian Federation it is + 7xxx xxx xxxx). You should know that in case of disabling the smartphone of the addressee, your message is preserved not more than 72 hours, after which it will not be able to get it again.

The Android OS smartphone usually sends MMS after installing automatic data. If the instructions say that it will be necessary to perform some manipulations, but this opportunity is still not available, useful advice Our article will help deal with reasons possible failuresand also determine the cause of the problem for subscribers of different operators.

Owners of smartphones I. push-button phones Havaica, that mMS settings MTS is installed automatically. This service is perceived as something of granted and not requiring manual intervention to activate. But at the time of sending the settings could "Turn the device" firmware, a network could occur or a different technical problem. How to make MMS work in such a situation, read below.

Before getting the MMS MTS settings, check the availability of access to global Network. Without it, the transfer and reception of multimedia messages is impossible. Usually the "Internet" connects automatically at the time of the first SIM registration base stationBut sometimes you need to do it by hand any of the methods:

1. Deputy USSD request from a combination of characters * 111 * 18 #.
2. Send the text "111" to SMIS at 2122.
3. Go to the "Personal Account" section of the company's website, and activate the service.
4. Install My MTS program from the AppStore or Google Play. And turn on the option there.

If MMS settings did not arrive after installing Sims, you can order them like this:

• Send a message to the subscriber 1234 (empty or with any text).
• Dial the phone 0876.
• Go to the official website and send the parameters from there.

Read more about the last way. Dial in the browser URL MTS.RU, click on the "Help" button -\u003e "Order Auto-tuning". Next, specify the subscriber number and go through the test proving that you are not a robot. All, you can click on the button sending a request.

When you use any of the ways, the phone will receive a service SMS with the settings.

How to set up automatically mms on MTS

Setting up MMS on MTS by means of a service SMS is true: you get a message with auto-tuning for your phone. The device will propose to apply them, with which it must be agreed. After that, it should be possible to send MMS. If sending did not earn, restart the phone.

When the reboot is completed, deposit the test MOSCU to the dedicated number 8890. Money from the account for test MMS is not written off, it is necessary to confirm that the parameters are accepted and the profile is activated. From this point on, the network equipment will know that your device can work on receiving multimedia messages.

What happens if you set up a "cell phone", but I do not send MOSC on 8890? Then any message intended for you will be saved in the database of the operator's Internet portal, and will not enter the phone. Instead of a full-fledged MMS, you will see only a text link for which you can view it.

Customize MMS manually

Sometimes auto-tunches may not come or not to activate for technical reasons. Then, to be able to send and receive multimedia attachments, you should specify all parameters manually. The procedure may differ slightly for different devices (for example, for iPhone and smartphone on Android).

Go to B. general menu Settings, looking for a section associated with the Internet (data transfer) and create such a profile (fields in various models may be referred to in different ways):

1. The name can you enter any, usually indicate something like "MTSMMS".
2. Specify the HTTP: // MMSC page.
3. Login and password - in both fields we write MTS.
4. Jumping server - 192.168.192.192
5. Port for ordinary push-button phones - 9201, for smartphones - 8080.
6. Access Point Name - MMS.mts.ru.

The content of additional fields can be left "by default". Full set manually entered parameters for different models Devices are presented on the operator's website. In the screenshots below you can see examples of settings for Android and iOS. Entering all the data, you should select a new profile, after which you to restart the machine and send a test MOSCU by 0890.

Why is MMS not sent from the tele2? There may be several reasons. According to the general rule, tele2 subscribers will be connected automatically and for free, for this you do not need to take any action - just insert a SIM card into a smartphone. But often users have problems sending such messages. We offer a list of the most popular problems arising, as well as ways to solve them.

Briefly on the topic

Most often, messages sending messages are associated with a failure in settings or with incorrect Internet parameters, to solve these problems, you need to check all settings or call 679

Problem number 1

Flew service settings or they are not at all:
Perhaps the most frequent causewhy MMS does not work on tele2. The most relevant for owners, so-called "outdated" phones. What to do in this case?

• Make a call by number 679 And request the correct efficient parameters. They will come on mobile phoneAnd it will be enough to apply them.
• how alternative option, call to the operator by number 611 . But the first option is preferable.
• Also, debug the sending and receipt of multimedia can be independently. Go to the settings of your phone / smartphone and fill in graphs by analogy:

Information about how in the body 2 connect MMS you will find.

Problem number 2.

Incorrect Internet parameters. Another reason why MMS is not loaded on tele2. To solve this problem, the operator also offers several ways:

• Order of the right parameters by number 679 similar to the settings request for multimedia messages;
• Through personal Area on the site tele2;

• Or manually make the following data in the settings of your communication tool (they are the same for phone owners on any platform, whether android, iOS, etc.)

In case of failure, we advise you to adhere to the above instructions. Most of the problems are solved by the implementation of these simple action. We also note that any receipt service is free. Tarispension is included only in the case of sending a multimedia message - its value is 6.5 rubles (the price is indicated for Moscow and the Moscow region).

With the development of the MMS era should have linger their former popularity. But this did not happen by virtue of various reasons: First, not all people have access to the Internet, and secondly, to send MMS messages much faster than in some messenger.

In contact with

Benefits MMS

MMS on Android

FROM operating system Android is in most cases supporting data transmission using MMS. Just need to configure it. You can change configurations on android using automatic setup, you can immediately contact the mobile operator, configure manually or order settings on the operator's website.

Automatically setting MMS

This method is very convenient, because the technique will make everything instead of the user. The probability of allowing an error or to harm the mobile device is striving for zero. The only minus: You can only use the automatic configuration once (at the first registration on the network mobile operator). How to set up MMS automatically:

1. Install the SIM card.
2. Run mobile device And enter the PIN, if required.
3. Get settings in the form of SMS messages from the mobile operator.
4. Run the configuration and wait for the installation.
5. Now you can read the sent messages.

Simcard prices

simcards

Appeal for help to the operator

In contrast to the previous wayYou can ask for help from the operator an unlimited number of times. But here the user will have to clearly execute instructions to achieve a positive result. Each operator mobile network There is your own free room Technical support. You need to ask for sending MMS settings on mobile phone number:

• MTS - 0890;
• MegaFon - 0550;
• Motive - 111;
• Beeline - 0611.

After ordering the settings, they must be taken, and then restart the device to start using and send messages. It happens that the service does not connect from the first time and requires additional activation. In this case, you need to call again technical support and ask to turn on the service for this room cell phone. After all manipulations, graphic messages will be activated..

Prices for mobile phones

cell phones

MMS manual setting

If the operator is not possible to call, and the MMS service is necessary from minute to minute, then it will have to be installed on its own. Instruction:

The following steps depend on the operator. Only some graphs are the same for users of biline, megaphone, MTS, tele 2, motive. This "Access Point Type" - MMS and Port MMS - 8080 (there is an alternative code 9201 in MTS subscribers and tele 2). An example of settings for mobile operator Beeline.

Username You can specify any (Use the symbols of the Latin alphabet). Access point is MMS.Beeline.ru. Login, or username, there will be Beeline and password coincides with it (also Beeline). In the MMSC column, you should enter http: // MMS /. IP address for this mobile operator - 192.168.094.023.

You only need to enter the specified information, and leave the remaining graphs unchanged. After you only need to save the entered data and restart the mobile device.

Order settings on the website of the mobile operator:

1. Go to the site of the mobile operator.
2. Select among the listed model of your cellular apparatus, enter your mobile phone number.
3. Click "Send".
4. For some time, the settings will come to the phone to be installed.
5. Reload the device upon completion of the installation.

If success failed to succeed, the problem is most likely in the user's actions or in the settings of the phone itself. If you correct the problem It is not possible to contact the mobile operator's service center.