We turn on the Android device without the power button. How to turn on a phone without an Android power button - several options for getting out of a hopeless situation Samsung power button

Even the most expensive smartphone is not immune to breakdowns. During operation, the device may fall to the floor, be damaged by water, and receive other mechanical damage.

As a result, individual controls may fail.

Practice shows that one of the most vulnerable points of a Samsung smartphone is the power button (on / off).

If the main phone button broke or stopped responding to pressing, only the master will help to correct the situation. However, you can use your smartphone for a while with the power button not working.

Turn on Samsung with a disabled button

There are several options for solving this problem, here are the most effective ones:

1. We put the smartphone on charge. Many models of Samsung phones and other manufacturers turn on when connected to a charger. The first thing that can be done in this case is put the device on charge and try to hold down the volume control key.

If you don't have a wall charger at hand, but you have a laptop and a USB cable, you can connect your phone to your computer.

2. If the first method fails, try hold down the volume button to the "-" position, the "home" button and, keeping these two buttons pressed, connect the power cable (do not release the buttons all the time!). After a few seconds (about 5-7) a warning menu should appear on the screen.

Need to remove from device back cover, insert the power cable. When the second battery indicator appears, you must abruptly disconnect the power cable and also abruptly remove and insert the battery. The phone will start to reboot.

VIDEO INSTRUCTION

Turn on Samsung without a button using the Mobile Uncle application

Turn on every time Samsung phone without the power button in all of the above-mentioned intricate methods is not entirely convenient, therefore, after a successful launch, we recommend installing on a smartphone special application Mobile uncle tools 2017 (Mobile Uncle).

With this universal multi-tool, you can do almost anything with your Android device by completely changing the settings and functionality of the working buttons.

The Mobile Uncle app works with any device based on MTK processors.

There is another application - Power button to Volume Button (available for free in Play Store) - it is specially designed for such a case. It can be used to shift the function of the power button to the speaker volume keys.

There are only two active items in the application menu: Boot and Screen Off. It is enough to put a tick next to the "Boot" item and the smartphone will turn on using the volume rocker.

As a rule, as a result of some unwanted external influence (or for other reasons), the power button on a mobile device may cease to function. Then the question arises, how to turn on the phone without a button turning on android.

The situation, of course, is not pleasant, but not hopeless. Solve the problem to pull out necessary information, or even using a smartphone for a while is quite possible. We will talk about this now.

There are several options to correct an unpleasant situation, then we will consider them, and you will only have to choose what is right in your case. But, you need to understand that no one gives a 100% guarantee, much depends on the brand and model of the gadget, on the causes of the breakdown and the depth of the problem. So, we will try.

We start the smartphone if it turns out to be turned off, but the power button does not work

Method one

First you need to try connecting your phone to a standard charger. Some models may start already at this stage. So, we connect to the charging, and try to hold down the volume control key, it is quite possible that after that we will see the boot menu on the smartphone display.


Method two

If we are lucky and the battery is not completely discharged, then you just need to disconnect your smartphone from the wall charger and connect to the PC using a USB cable.

Method three

If the “USB debugging” mode was enabled on the device, you can try to turn on the phone using the command line of the computer. What do we need to do in this case.

Install on PC ADB, after which we need to open a command prompt window, connect our device via USB and in command line write in adb reboot and press Enter.

* Note: ADB is console application for computer. It allows you to debug Android devices as well as emulators.

If the power button does not work and the screen is locked

In this case, you need to worry about saving battery power. On the Samsung Galaxy you can unlock the device with the "Home" button. The same function is available on some modern models. You can also “wake up” the smartphone with a double “tap” on the screen, if this option is active for you.

You can also call the phone from another device or, if there is a physical camera button, try to launch the application of the same name, and from it enter the main menu.

We will look at the video for the next method. In this case, you will need to disassemble the smartphone and close two contacts:

Using special applications

If you managed to start your device without the power button using one of the proposed methods, then you can install one of the special utilities that will help you safely use the gadget with an inoperative button. Let's consider some options.

An excellent application that will be convenient not only in critical situation... We set the parameters that are comfortable for ourselves and our smartphone will turn off when it lies on a flat surface or in a pocket, and turn on, as soon as you pick it up:

In an emergency, this utility will transfer the on / off function to the volume button:

Another softphone that will be useful in the described situation. With its help, we will be able to turn on or off our smartphone with a light shaking.

As a result of the strong physical impact or at the end of its service life, the mechanical Power button on the mobile device may fail. It would seem that without this element it is simply impossible to turn on the smartphone, but in reality it is not. There are several ways to enter the device menu when the power key is inoperative. Let's take a look at how to turn on your phone or tablet without the Android power button.

Ways to launch Android without the Power key

In theory, there are several methods for loading a gadget with a broken power button. However, it is impossible to give a full guarantee that at least one option will work. Much depends on the model of the mobile device and on what state it is in - active or off.

You can try to turn on Android without the Power key using:

• Charger and volume rocker;
• Computer and ADB debug bridge;
• Special software.

How to boot Android if the phone is turned off?

If your smartphone is in an inactive state and the power button does not function on it, the first thing to do is connect to it Charger... On some models of devices, the operating system may start already at this stage.

If the desired does not happen, try holding down Volume Down (Volume Up) or simultaneously two volume keys while charging is on. These actions can cause the environment to load Recovery Recovery. This menu will allow you to restart the gadget, that is, enter graphical interface Android.

When the Power key is working, the smartphone is restarted through the resuscitation area by the command reboot system now. If this button does not function, after entering Recovery, wait a while - the phone should reboot itself.

Enabling Smartphone Using ADB Debug Bridge

Android Debug Bridge (ADB) is special program allowing you to manage mobile device through a computer. With its help, you can unlock root-rights, change the firmware, enter Recovery mode and perform a number of other actions, including restarting your phone. The only condition is that USB debugging must be activated on Android.

If you activated this function before the power button failed, we try to turn on the device using ADB:

Instead of ADB, you can use the utility to enable the gadget via a PC ADB Run... It is a simplified analogue of the SDK Platform Tools, since almost all control commands are already written in its code. They only need to be started with a specific number.

To enter Android via ADB Run, you must:

How to download Android if the phone is in sleep mode?

If the smartphone is turned on, but is in sleep mode, it will not be difficult to get into its menu without the Power key. The main thing is not to allow a complete discharge of the battery on the mobile device, so that it does not turn off.

There are several ways to activate the screen on Android:

• Connect the charger to the mobile phone;
• Tap twice on the display ( this function not supported on all smartphones);
• Press mechanical Home button if it is provided for your phone;
• Call the unit from another smartphone.

In order not to restrict your actions in the future due to the inoperative power key, its function should be transferred to another button (on Volume Up or Volume Down). This is done using special software that can be downloaded from Play Market absolutely free. One of these programs is Power Button to Volume Button. It works as follows:

Your phone will now turn on with the volume rocker.

You can also turn on Android using the built-in spatial orientation sensors. To do this, you need to download the Gravity Screen program, and then adjust the sensitivity of the indicators of vertical and horizontal orientation.

In Android OS devices, the power button has two functions - turning the device on and off, as well as activating and unlocking. A failed power button does not allow full use of the device, which is a direct road to service center... If there is no workshop nearby or it is important to postpone repairs until a later date, in this article you will learn how to turn on your phone without the power button.

The phone is turned off, the power button does not work

First, consider the situation when the device is completely turned off, the power button does not work and we need to start the OS.

Method 1: connect to charger

When the power cable is connected, charging will start in the off state. However, some models load the system at the same time. If this does not happen, try connecting the device to the computer to turn on the phone.

Method 2: connect to the charger and hold down both volume control buttons

At the time of installing the power cable, hold down both volume buttons and hold until the boot menu appears - the phone will turn on, but then you will need to select the boot mode, while different models phones may offer different options.

The Motorola Razr M smartphone selected for testing has loaded Boot mode, where it is proposed to select one of the further actions: Normal PowerUP, Recovery, AP Fastboot, Factoty and BP Tools. Disconnect the cable and select one of your preferences, such as Normal PowerUP, to turn on the phone.

In my case, the smartphone loaded the system only when the “Factoty” item was selected. And when "AP Fastboot" was selected, the firmware mode was launched, where instead of booting the system, you can issue a reboot command. In this case, you will need a computer and the RSD Lite program, and you will also have to edit the file with commands when flashing, but this is only if you have a Motorola smartphone. For smartphones from other manufacturers, appropriate programs are used.

If you managed to get into Recovery mode, then select the line - "Reboot system now". To confirm the action, you need to press the power button. And since the key is not available, it is hoped that the smartphone will perceive tactile pressure through the display. Third-party Recovery variations support clicking through touch screen; and from basic modes recovery - just a few. If the display does not respond and the power button does not work, then this option disappears.

Method 3: Wait for the alarm to turn on

Usually, an alarm clock has the ability to turn on the device to activate a previously set action, even when the phone is turned off. If a similar event occurs, take a moment to go to the menu.

Phone is on but locked

To unlock the screen, the device must be woken up, which can be easily done by an incoming call or by connecting to a charger. And what about on the street? Of course, plugging in a portable charger is inconvenient every time. In this case, the methods described below will do.

Method 1: Using a Biometric Authentication System

Most modern smartphones come with a built-in fingerprint sensor or allow you to customize the Face ID system. The latter, to release the lock, uses a previously specified snapshot of the owner's face. If you set up biometric screen unlock, then you do not need to press the power button to unlock the screen. It should be borne in mind that some smartphones, in order to use biometric unlocking, first need to wake up the device with the power button.

Method 2: Turn on the phone with the MiKey button

The headset jack accessory contains a customizable button. In the application settings, the parameter is indicated - the number and duration of pressing, to lock and unlock the screen. This method is a good alternative if the device does not have a fingerprint scanner or if the sensor requires waking up the smartphone. Also, the button will come down to wake up the device and then unlock it by internal means or biometrics.

Method 3: Turn on the phone using gestures

Some smartphones allow you to launch applications when you enter a gesture of the corresponding letter - C, V, W or M. after it starts specified program, for example, a calculator that can be easily folded up and does not interfere with the further use of the smartphone.