The selected operation converts base discs to dynamic. Convert dynamic disk to the basic. Convert dynamic disk to the base disk

As such, there are two types of computer hard disks: main and dynamic disk. Basic discs are frequently used media with Windows. They contain partitions - the main sections and logical disks, which are usually formatted with the file system. Dynamic discs provide the ability to create fault tolerant volumes, may even occupy several disks - the base discs cannot. We can easily convert a base disc into dynamic on our Windows XP, 2003, 2008, Windows 7, Windows 8 operating systemsoh, but it is quite difficult to convert a dynamic disk to the basic one. Why is it going on? This is because Windows Disk Manager does not support the dynamic disk conversion, which contains the volume (s) or section (s) in the base disk, and this will only allow you to convert those discs that do not contain volumes or sections.

Dynamic discs and basic discs

Basic drive: A certain physical disk with which you can work in MS-DOS (Microsoft Disk Operating System) and all Windows-based operating systems. It may contain up to 4 major sections or 3 major sections and 1 additional partition that contains several logical partitions.

Dynamic disk: This is also a kind of disk, the function of which is similar to the main partition on the base disk. However, it can be divided and exchanged data between discs. For example, a dynamic disk can actually consist of a storage location that is divided into two disks. In addition, data between discs can be copied to the dynamic disk in case of some disc damage. This feature needs large disks, but it is more reliable.

Windows operating system supports two types of disks: Basic disk and dynamic disk. Basic discs are used to control data data on disks using the main sections for this, additional sections and logical partitions; While the concept of dynamic disk was introduced microsoft.starting with Windows 2000, and it is added to "Disk Management". Dynamic Disk Storage uses the volume of disks, with advantages, such as the possibility of creating volumes, and containing devices on multiple disks. Therefore, an increasing number of users want to use a dynamic disk instead of an ordinary one, and are looking for methods in order to convert them to the base discs to dynamic. However, since some Windows operating systems (Windows NT, MS-DOS and all Microsoft Home Edition Operating Systems, Vista Home Basic Edition, Windows 7 Home Basic Edition ...) do not support dynamic disk, on some situations, you must convert a dynamic disk in base. Unfortunately, Windows does not provide services for such needs. However, users to make this transformation can use third-party programs such as Aomei Partition. Assistant. FROM aMEI Partition Assistant, you can easily convert a dynamic disk to a base disc without loss of data, and in the same way we could also easily convert the base disk into the dynamic or using the built-in disk management snap window or Partition assistant.

Most home personal computers configured using basic disks, but IT specialists tend to prefer to use dynamic disks, as they offer more functionality And increase reliability and performance. So far, the home versions of the Windows operating system support Enterprise / Pro / Ultimate basic discs in various versions of the Windows operating system, and also support dynamic discs. Microsoft is listed operations that can be performed on each of these types.

Works that can be performed on basic and dynamic disks:

1. Check the disk properties, section "Properties" and "Tom Properties".
2. Set the disk letter assignment for a disk or partition volume.
3. Support both sections MBR And GPT styles.
4. Converting the base disk to a dynamic disk or dynamic disk to the base disk.

Operations that can only be performed on dynamic disks:

1. Creating and removing simple, composite, alternating, mirror and RAID-5 volumes.
2. Do the extensions for a simple or composite volume.
3. Remove mirror from a mirror volume.
4. Make a break of a mirror volume in two volumes.
5. Make the repair of a mirror volume or Tom RAID-5.
6. The ability to activate the missing or disconnected disk.

Conversion of the base disk to the dynamic disk

Before you start this process, you should know that as a result of this operation you can lose the data, so it is extremely important that you first made backup Data on outdoor hard disk. So, let's go up, only if you know what you are doing and be careful.

If you use a base drive as a shadow copy storage, in order to avoid data loss and you intend to convert a base disc into a dynamic disk, it is important to take the following precautions. If the disk does not have a bootable volume stored source filesBefore converting a disk, you must first disable and remove the volume containing the source files containing shadow copies on dynamic disk. You must bring the volume containing the source files back for 20 minutes, otherwise, you will lose the data stored in existing shadow copies. If shadow copies are on boot volume, You can convert the disk into dynamic, without losing shadow copies.

Using the user interface

To convert to Windows 8.1, open the WinX menu and select "Disk Management". Right-click on the disk and select "Convert to dynamic disk". You will be asked to check the disk again and click on the "Convert Last" button. The process will begin, and the disk will be transformed into a dynamic disk.

Using the command line

Open command line Enter with elevated privileges diskpart. And press ENTER.

Now enter the type sELECT DISKN. And press ENTER.

Enter the following type convert Dynamic And press ENTER.

Convert dynamic disk to the base disk

Using disk management

Using Disk Management - To convert a dynamic disk to a base disk, right-click on the volume you want to convert to the base disc, and for each volume on the disk, select the Delete Volume command. When all volumes on the disk are deleted, right-click on the disk and select "Convert to Basic Disk". The transformation operation will begin.

Using cmd.

Open the command prompt and enter diskpart. And press ENTER.

Enter the following type lIST DISK. And write down the disk number, the disk you want to convert to the basic one. Now enter the data and press the Enter key, one after another:

1. Enter type sELECT DISK. .
2. Enter type detail Disk. .
3. For each volume on the disk, enter the type sELECT VOLUME \u003d.<номер тома> And then enter Delete Volume.
4. Enter type SELECT DISK. . Specify the disk number you want to convert to the base disk.

Finally enter the typeconvert Basic And press ENTER. The transformation operation will begin.

Remember that before performing any of these operations, you must always make a backup. As well as never Convert a base disc containing a dynamic disk operating system, as this can make the system unloaded.

After buying a laptop with the Windows 7 operating system installed one, you can detect one local disk With that it is not quite convenient. This is not a convenience due to the fact that if the situation happens in which you will need to reinstall the system, you will have to manually move the information you need to external media and only after that, format the disk and install the system. If you have several local discs you can initially save required files Not on the disk on which the system is installed (often disk C), and on other local disks and in the event of a failure, boldly format the disk on which the system without fear is set to losing data on other disks. That is, it is prudent to use several local drives, one for the system, other (other) to save files (movies, photos, music). To do this, you need to "split" / divide the local disk per one or more. In previous versions of Windows operating systems, it was necessary to download additionally software, to break or combine local drives, in Windows 7 you are delivered from this and you can use the built-in utility, very simple and understandable.

So, let's start breaking / divided the local disk for two, without data loss. To do this, press the right mouse button on "A computer" And choose "Control". If you do not have a badge "A computer" On the desktop, click "START" Right-click on "A computer" And choose "Control".

Then go in "Disk management", choose the disc you want to split / divide, click on it right mouse button and choose "Squeeze Tom".

After that, a window will open in which you want to specify the size of the new local disk. In field "Size of the compressible space (MB)" Indicate the size of the new local disk created (half of the disk will be specified by default). Do not forget you specify in megabytes, I remind 1 gigabyte \u003d 1024 megabytes, i.e. if you want to specify 100 gigabytes, you need to write 102400 megabytes, if 200 gigabytes - 204800 megabytes, etc. (I want to note that the final disk will differ from the one you specify, 5-10 GB will be spent on system files). IN this example I indicate 200 GB. After specifying the size of the new disk click "Squeeze".

After that you will see the created disk. Now you need to create a call for this right-click on the disks and click "Create a simple volume".

The next window is informational, read and click "Further".

In the next window, we specify the size of the volume, so that the place in vain does not disappear indicate the maximum possible.

After that, choose the letter, by and large, without a difference you let you indicate, in the future you can change it.


The next step format the created local disk and select the label (name) of the volume. I recommend choosing file System NTFS, cluster size - default and put a tick "Fast formatting".


In the window "Completion of the Master Creating a Simple Tom" We view the specified settings if all indicate correctly click "Ready"if you need to make changes "Back" To the time where the error is.


Go to B. "A computer" And we see the result of partitioning / dividing the local disk, namely, the new local disk.


I hope this step by step guide, it helped you without prejudice (without data loss) to split / divide the local disk in Windows 7.

Tell me how you can convert a dynamic disk to the base without loss of data, they say that it is not possible, the fact is that I have two hard diskOn one of them was installed Windows XP, I reinstalled it on Windows 7 and now the seven will not want to see the second hard drive of 240 GB with data, in the control of disks is written Dynamic foreign. Where I just did not ask, everyone says that you must first format the disk, and then convert to the main one. This means you need to pre-copy data from there, but not where, you can tell good decision, I sent a screenshot. Artyom

Convert dynamic disk to basic

The basic or main type of disk is used from the older times, contains the basic partitions used when loading the operating system and is perfectly understood by the loader.
Dynamic disk uses volumes instead of sections and the most important thing: it is impossible to install an additional operating system to a dynamic disc, and some types of dynamic disks are supported only by defined windows versions. Although Microsoft cites a lot of arguments to use dynamic discs, there are as many reasons to use them.
Let's come back to our problem. It is clearly noticeable that Artem has disk number 2 is determined in drive management as Dynamic foreignIt happens and exit from this situation.

You can make conversion dynamic disk to basic or basic without funds third-party developersBut you will have to first copy all your data from a dynamic disk to a safe place, then convert the disk to the main and return the data into place. This method Absolutely safe, but long, he is shown at the end of the article who wants to immediately go to him.

• Retreat: Read our new article how to convert by acronis programs DISK Director 11, it is a little simpler given below the option.

Personally, I always use another way, it is very fast and nothing is needed to copy, but is associated with risk. If you do something wrong, then you will lose your files and they will have to restore that not every will be able. We use free utility TestDisk, download it on the official website. For Windows 32-bit one version, well, for Windows 64-bit, another, if you already downloaded it, unzip and run the utility.

Well, we use the TestDisk utility.

In the first window, choose Create

In the disk list that appears, we highlight the desired hard and click Proceed

Choose Intel

Click Analyse and define the file system of the disk.

Click Backup.

We introduce Y Agreeing convert dynamic disk to basic.

ENTER

Hard drives converted to dynamic in order to use their advantages or as a result of experiments with functionality management utility windows discs, In the original state - to the base discs - using this utility can be returned only if there is no absence on the part of the partitions and stored data on the operated disk.

If there is only a partition structure on a dynamic disk, but there are no inside partitions important files, resolve the issue with the conversion to the basic is easier through the same disk management utility. Sections can be deleted and form them again as part of a converted base disk. You can also enroll in a situation if there is much to temporarily move the data stored on a dynamic disk. If we are talking On the large volume or absence of a media for temporary data movement, you can resort to operation to convert a dynamic disk to the base through third-party software. Among this software is a popular manager disk space from Acronis.

The capabilities of the Acronis Disk Director program include the function of converting dynamic discs to the basic. In this case, the conversion process occurs without loss of data stored on the sections, as well as without damage to the existing structure of the sections themselves. Below in the details will look at how this process occurs. And we will use actual version Acronis Disk Director 12.

According to the company Acronis paid. Disk Director 12 on the official website of the company can be downloaded for free in the demo version. But it is limited by a demonstration mode of work, and it is impossible to apply the planned operations with its help.

Dynamic type disk in the program interface is marked in red. In the context menu caused by dynamic disk, among the few available options We will see the desired - "convert to the basic". Her, actually, and choose.

Confirm the planned operation.

After that in the program window we will see that operated hDD It is already displayed in green and marked as basic. But so far only the future result of the scheduled operation is visible. The operation must be applied. Click the corresponding button at the top of the window.

In the notification of rebooting, click "OK".

Then the computer will restart, and Acronis Disk Director will carry out a disk transformation operation from dynamic to the base. After windows startup Open Disk Director and see that the operation has passed successfully - the hard disk is marked as basic.

The folder stored on the disk and the files were not injured.

Acronis Disk Director page on the official developer website: http://www.acronis.com/ru-ru/personal/disk-manager/

Excellent day!

This article is in active development and in the near future will be fully completed (-

If you have any questions, describe the situation in detail and we will try to help you !!!

We declare the feature of the transformation of dynamic disks to the basic and back.

How to convert the disk format to the basic or dynamic in Microsoft Windows. XP, Wista. Win 7 (LDM -\u003e MBR)

Preamble

This article describes the conversion of the base disk to the dynamic and reverse conversion of the dynamic disk to the base using the "Disk Management" snap in Windows XP Professional. The Windows XP Professional operating system supports two types of storage devices: basic and dynamic. The basic disk storage device uses discs with sections. Basic disk contains basic volumes (main sections, additional partitions and logical disks). The dynamic disk storage device uses wheels with volumes and provides capabilities that are not supported by base discs, such as the creation of volumes occupying several disks (composite and alternating).

tip from Microsoft Conversion of a dynamic disk to the basic LDM -\u003e MBR

This conversion method recommended Microsoft leads to a complete loss of data on the entire carrier when it is converted to LMM -\u003e MBR (plus this method is only that you do not only need to use third-party software software)

To convert a dynamic disk to the Basic, follow these steps.
Perform backup or moving important data from all dynamic volumes on the other volume.
Sign in with accounting Administrator or member of the Administrators group.
Click the Start button and select Control Panel.
Select Paragraph performance and maintenance and administration, and then double-click the Computer Management icon.
In the left area, click Disc Manage.
Right-click the volume located on the dynamic disk to be converted to the base, and start the Delete Tom command.
In the query window that appears, click Yes to confirm the removal of the volume.
Repeat steps 4 and 5 for all volumes of dynamic disk.
After removing all the dynamic disk volumes, right-click the dynamic disk that needs to be converted and run the convert to the base disk.

Note. Clicking the gray rectangle with the disk heading on the left side of the information area. For example, right-click Disc 1.

tip from Vado Conversion of a dynamic disk to the basic LDM -\u003e MBR

The method described below makes it possible to do the same. without data loss

I often come across the work with various situations, including those not described in the manuals from the Melkosoft, respectively, sometimes you have to reach it. After all, Melkasoft writes not for people (-

Immediately, I want to emphasize your attention on the fact that before the start of the transformation procedure, at all logical sections of the disk transformed, at least 15% of the free space should be, since many have no reversible errors during the conversion. I also recommend using Win-PE for this procedure with pre-installed Acronis Disk Director 11. If you have file or physical errors on your disk, you cannot perform this operation. You can also check the error checking from Acronis Disk Director 11 by pressing the right button on the logical disk and select the appropriate item in the drop-down menu. Such a procedure must be done on all logic disks Sliding all checkboxes when checking, that is, checking on file and physical errors.

So, let's begin:

Consider an example of converting a dynamic file system to the basic and back on a visual example in pictures, by product. Acronis Disk Director 11.It is 11 version Acronis Disk Director.allows you to work with dynamic partitions in real time and convert them without moving data to the backup carrier, since it is not always possible to do this. Consider such a situation:

Have a laptop on which the reasons for not known for us appeared a dynamic file system, how to return everything back without prior movement, since modern laptops Only a section for recovery weighs 25 GB, and if a laptop is under warranty, what to do then? We for help in the fight against this not justice comes " Acronis Disk Director 11 " this software Conducts very quickly and conveniently to return control over the situation. (- In order to bring your computer from this provision you need:

1_) download, install, AcronisdISK.director 11.

2_) Make boot diskAcronisdISK.director 11.(If there is the ability to install on the same computer where you need to transform, then the boot disk can not do).

2_) Start AcronisdISK.dIRECTOR 11.and convert partitions according to the examples specified in Figure No. 1 and No. 2, depending on which file system you need to convert your HDD.

We often ask a question that is better than MBR or LDM?

To the question of what is better mBR or lDM. Definitely you can answer that the MBR is better!
1.) Compatibility with other systems.
2.) Lack of problems when recovering data from this section.
3.) Scanning and recovery systems in their most operate only with MBR.
4.) Convenience of working with sections in any programs and more.

The reasons for the disappearance of dynamic sections, select your.

1 After restoring the factory settings
2 after system failure
3 after rollback through third-party programs
4 The reason is not known

If you disappear sections of a dynamic disk or MBR, you can also restore them with acronis help Disk Director 11, if you have not yet been styled on this disk.

If you did not find a response to your question, leave your comment and we will answer!

The article was taken from the official portal of technical microsoft support and improved by the fan of operating windows systems (-

Dear readers !!! I really want to draw your attention to one is not a little important fact !!! Many of you are mistaken when choosing software To restore your HDD. In order to better understand the situation in which you turned out to be a free light on one nuance. :-) Attention!!! If your computer worked properly until "x", after which you found that your HDD is dynamic, it means 99% that the conversion using Acronis Disk Director will not help you !!! Question: Why? Answer: Yes, in some cases, the HDD software or hardware damage looks like (dynamic disc), but the main difference is that at the same time you do not see its size and in some cases there were previously present sections too. If you have this situation, you will help R-Studio 7.0. With this program in your situation, you can restore all the data. This is done like this: Check the integrity of HDD for software or hardware defects. It is necessary to act in the following steps in the following order, in order to do not exacerbate the situation at the diagnostic stage. 1.) Check HDD for hardware defects. One of the most fast ways eliminate 99% hardware damage, it is to consider information about damaged sectors From the most damaged HDD using any tool that allows you to read the information with Smart, since we will be pushed out in the next step from this information to make our further actions with damaged HDD. For example, take a comfortable utility with an intuitive interface for reading information with SMART Hard Disk Sentinel. 2.) If there is nothing to check for hardware damage, proceed to verification on software damage. Such a check can be done using Acronis Disk Director 12. 3.) 3 HDDs must be connected to your computer (damaged, empty, with the operating system.) 4.) Run R-Studio, scan a copper for the presence of partitions and restore the data on the empty HDD from them. Everything should be restored without loss !!!. I wish you good luck in your endeavors;)

Attention!!! If you do not respond within 2 weeks, Your questions can be removed automatically. at the discretion of the moderator