How to make a computer from sleep mode. Turning off the function by closing the laptop. We disassemble simple and well-known causes

Directly, this is not what is called "the problem on the head". Like, sleeping mode and so "no one needs", and then there are also problems with access from it.

No, not at all.

Hibernation is very useful:

• Especially for laptops that are not turned off by day. At the same time, the user does not sit constantly at the computer, and if they eat from the battery, then inexorably garden him. Sleep mode saves the whole image random access memory in separate file and turns off the power. Thus, the battery is saved.
• Moreover, the subsequent load "Through the image" passes much faster, and WINDOVS is returning precisely to the point from which it left. And when you exit, there is no need to even save the troubled files if the work with them will be continued.

In general, to exit "Sleeping" - very useful thing. But if she did not give rise to the problem - the system, when turned on, refuses to "wake up".

The reason why the computer does not go out of sleep mode, it belongs to Windows XP or Windows 10, is most likely systemic, so it will be possible to understand it at the global level.

For this:

Characteristic for Windows 7

Supports of Windows 7 may face the following. In this system, the hardening time of the hard drive through set time Drawing a computer in sleep mode.

Windows 7 has a standard way to set the hard disk shutdown 20 minutes after switching to sleep mode. With a subsequent attempt to return to work, the system or is loaded for a very long time or the computer does not turn on at all.

Do not tease geese, and disconnect the power off function at all. For this:

The result of all these wanders and there will be a constant feed supply to the screw. As a result, solving a problem in Windows 7, if the laptop does not turn on, after it went to the "sleepy state".

Talk about USB devices

Has long gone this problem first windows C USB when they did not recognize or incorrectly set the driver of this tire. Nevertheless, the echoes of the trouble we can feel today when it does not come out of the sleep mode of Windows 8 due to the fact that some USB devices do not allow to engage in the work "from sleep".

Among the devices first mark the simplest - mouse and keyboard.

Thus, while I sleep, turn off the mouse and trying to "wake up" only the keyboard. If it is not in the mouse, I change the combination on the contrary - I connect the mouse, turn off the keyboard and turn on the computer already with the mouse. What is interesting, and such a focus sometimes passes. But on "science of shutdown", you need to do it any other way:

What is the difference in sleep mode, hibernation and hybrid sleep mode?

Sleeping - This is a reduced electricity consumption mode, which allows you to quickly resume operation in normal energy consumption (usually within a few seconds) at the request of the user. The translation of the computer into sleep mode is reminded by pressing the "Pause" button on player DVD.: The computer immediately stops all operations and at any moment ready to continue the work.

Hibernation mode - this is a mode of reduced electricity consumption, designed primarily for laptops. When switching to sleep mode, all open documents and parameters are stored in memory, and the computer switches to low power consumption mode, and when you go to hibernation mode, all open documents and programs are stored on the hard disk in the Hiberfil.sys file, and then the computer is turned off. Of all the energy-saving modes used in Windows, it requires the smallest amount of electricity to maintain hibernation mode. If within a long period of time, the computer is not planned to be used and there is no possibility to recharge the battery, it is recommended to translate the laptop to the hibernation mode.

Hybrid sleeping mode - This is a mode that designed predominantly for desktop computers. The hybrid sleep mode combines sleep mode and hibernation mode, since all open documents and programs are stored in memory and the hard disk and the computer is translated into the reduced electricity consumption mode. If the hybrid sleep mode is enabled, the transition to sleep mode automatically translates the computer to the hybrid sleep mode. On desktop computers, the hybrid sleep mode is usually enabled by default.

As in normal sleep mode, the computer should not be de-energized with a hybrid sleep. With an unexpected power failure operating system Windows can restore data from the disk, but this recovery is not standard and is usually accompanied by an intensive load on the hard disk - do not abuse.

How to translate a computer to one of the modes?

Start ---\u003e Click on the arrow next to the "Shutdown" button and select the desired mode:

If a hybrid sleep mode is allowed in the power settings, then when you select the Sleep item, the computer will be translated into a hybrid sleep mode, and not in normal sleep mode.

Choose which of the items will be displayed by default, is also very simple - right-click on the button or on the free part next and click "Properties". Select the "Action of the Power Buttons" menu. In pictures described.

How to bring a computer from sleep or hibernation?

On most computers, you need to press the power on the power button. But because All computers are different, ways to resume work may also differ. To transfer the computer to normal mode, it may be necessary to press any key on the keyboard, click the mouse button or open the laptop cover.

Why is there a "sleep" or "hibernation" command in the completion menu?

• The "Hibernation" command will not be displayed if the hybrid sleep mode is enabled in the extended settings of the power supply plan. If "hibernation" in the completion menu is necessary, the hybrid sleep mode will have to be disconnected.
• The video card does not support sleep mode. Update the video card driver.
• These modes are disabled in BIOS Computer. Restart the computer and log in to the BIOS (DEL or F2 key, as a rule), in power settings, turn them on. Insofar as bIOS version Almost all computers are different, read more details on the inclusion of these modes in the instructions for the computer (motherboard) or on the manufacturer's website. To check the support of sleeping modes with a computer, click Start---\u003e In the search window, type cmd.and press ENTER. In the window that opens, execute the command: PowerCFG / A Some previous versions Bios do not support ACPI interface, so computers cannot successfully switch to additional modes Nutrition. In this case, you need to update the computer BIOS.

I do not use hibernation, how to turn it off, to retire the Hiberfil.sys file? How to enable hibernation?

IN hidden file hiberfil.sys (root system Disc) Reset a copy of RAM when careing to hibernation.

To turn off hibernation, and perform:

PowerCFG / H Off

To turn on:

PowerCFG / H ON

The computer automatically goes into sleep mode, how to disable it?

Settings

How to configure the transition to sleep mode / hibernation at a simple computer?

Start---> Control Panel ---> Power Supply --->

You can configure the transition to sleep in the first window:

To change the transition to hibernation, click "":

How to set up a transition to hibernation with low batteries? How to enable / disable a low battery charge notification?

By default, the low battery charge notification appears when the battery charge level is achieved, equal to 10 percent, and the notification of the battery charge level appears when the battery level value is achieved, 7 percent. When the battery charge level value is 5 percent (the critical battery level), the laptop switches to hibernation mode. If the laptop is installed old batterywhich has a smaller energy margin, the remaining 10 percent (when notification of a low battery charge) and 7 percent (when notification of the reserve battery charge level appears) may not be enough to save documents and exit the system. In this case, it is necessary to increase the values \u200b\u200bof the parameters of the "low battery level" and "Backup Battery".

Similar settings will be desktop computer With source uninterrupted power (UPS).

Start---> Control Panel ---> Power Supply ---> Setting the power plan ---> Change extra options Nutrition

How to translate into sleep / hibernation with a computer power button or when closing the laptop cover?

Start---> Control Panel ---> Power Supply ---> Setting the power plan ---> Change additional power options

On laptops, it is possible to choose an action when the lid is closed:

The computer independently comes out of sleep mode / hibernation, how to fix it?

Start---> Control Panel ---> Power Supply ---> Setting the power plan ---> Change additional power options

Start---> Control Panel ---> Device Manager And disconnect in the properties of some components checkbox "Allow this device to display a computer from the standby mode.

Most often "Bind" Computer: Keyboard, Mouse, Network Card.

To view a list of all devices capable of displaying a computer from any sleep modes, click Start---\u003e In the search field, type cmd.and press ENTER. In the window that opens, execute the command:

PowerCFG -DeviceQuery wake_from_any

The problem is also found due to the use of outdated drivers of these components or video card drivers. You must update them.

How to eliminate daily awakening at one time?

Known problem with updating Windows Media Center.If express setup was performed.

Launch task Scheduler (Start---> All programs ---> Standard---> Service---> Task Scheduler).

Go: Job Planner Library ---> Microsoft. ---> Windows ---> Media Center. ---\u003e Double-click Discover the building mcupdate_scheduled.

click the tab Triggers. ---\u003e click Change ---\u003e Install a new (convenient) time to update WindowsMedia Center..

Automatic reassignation

Microsoft has released automatic fixing Microsoft Fix IT 50448 - the update will start when logging in.

How to disable password request when leaving sleeping mode and hibernation?

How to create shortcuts for sleeping mode or hibernation?

Because Standard windows commands Not always correctly executed, I recommend using the PSShutdown utility. Read more about it.

How to translate a computer into sleep / hibernation and resume work on schedule?

As in the previous question, we will use the PSShutdown utility (download) from the composition of Pstools Mark Russinovich. Download it and unpack any folder.

Run task Scheduler (Start---> All programs ---> Standard---> Service---> Task Scheduler).

Translation into sleep / hibernation on schedule

Click " Create a task":

Indicate Namefor a new task and set the checkbox " Fulfill the highest":

Go to the tab " Triggers.", Press" Create

Click " OK". Go to the tab" Actions"click" Create". In the next window, click" Overview", specify the path to the PSShutdown utility, and click" Open". We specify as arguments:

• -d - sleep mode
• -H - hibernation mode

Click " OK", in the" Creating Problem "window - Once again OK".

The computer to go to sleep / hibernation on a schedule is configured.

Conclusion from sleep / hibernation on schedule

To successfully output a computer from advanced software modes on a schedule, you need to power the computer ( motherboard) After sending to sleep / hibernation was not interrupted.

Click " Create a task":

Indicate Name For a new task:

Go to the tab " Triggers.", Press" Create", In the next window, set the desired schedule:

Click " OK".

To bring a computer from sleep / hibernation, you need to plan some task. This can be something useful, for example, launching the Internet, or something less useful, such as displaying a message. In the last version and stop.

Go to the tab " Actions", Press" Create", In the next window, choose the desired act And write a message:

Click " OK", go to the tab" Conditions"And put the checkbox" Waking a computer to perform a task":

Click " OK".

A computer to exit sleep / hibernation on a schedule is configured.

Do you have any questions? Specify them on our.

What is the difference between sleep and hibernation modes?

• Sleeping In Windows 8, this is a state of reduced power consumption of a computer, in which part of the equipment (hard disk, matrix) is turned off, and the rest suspends the operation. Open documents And other data will be saved in RAM. The system in this mode can be returned to the working state as quickly as possible.

• Hibernation - It is saving the current session to a special file on the hard disk - hiberfil.sys, followed by a PC shutdown. When leaving the hibernation, the data hiberfil.sys is downloaded again into RAM, and you can continue to work from the moment on which they stopped. This mode is designed for laptops, as it allows economically to spend the battery charge.
• Hybrid sleeping mode Combines both previous ones. The session in this mode is stored in memory and on the hard drive. If during idle time it does not turn off the PC power - the session is restored from the memory if it happens - with hard disk. The hybrid sleep mode is intended for stationary computers. If it is enabled - hibernation becomes inaccessible and disappears from the list of ways to turn off the PC, as in this example:

How to "wake up" a computer?

In most cases, for the output of a PC from sleep or hibernation, you need to press the POWER button once on the housing. But on some models, you need to do anything else for this - press the key on the keyboard or open the laptop cover.

How to disable the transition to sleep mode on windows 8?

Turn off sleep mode In Windows 8, it is possible through the system metro-application "Computer" or control panel.

First method (through the control panel)

Click on the keyboard. Combining Windows + I (to open the list of parameters in the Charms panel) and select "Control Panel".

Or open the context menu of the "Windows" button and click the appropriate item.

In the control panel, open the category "Equipment and Sound" category.

And next - section "Power supply".

Click on the Sleeping Mode Setup Logging menu.

Expand the drop-down list "Translate PCs to Sleep Mode" and select "Never". Click "Save Changes".

Disable the transition to sleep mode on a laptop can be even faster. To get into the settings, click on the battery charging icon in the system tray,

click "Advanced Power Options"

and select "Never" from the same list. Here, as you can see, you can turn off the sleep mode both when powered from one source (network or battery) and both.

Second way

Previous method is suitable for different versions of Windows ("Seven", Vista, Eight), and this one - only for Windows 8, since there are no metro-applications in predecessors systems.

To disable the transition to sleep mode, do the following:

• Click the Windows + I combination and click the "Changing Computer Settings" panel.

• Click on the "Computer and Device" menu.

• Open the "Finishing and Sleep Mode" section and deploy the Sleep List.

Select from the list item "Never". Setup will enable without confirmation.

The same actions will help disable the transition to hibernation if it is active.

What if the PC under Windows 8 does not go into sleep mode or leaves it spontaneously?

Forbid devices "Wake up" computer

Display a computer from sleep can various devices, especially connected via USB (mice, flash drives, etc.). To prohibit them do it without your knowledge, do the following:

1. Install latest versions Drivers on the motherboard chipsets and the device themselves (if they work with individual drivers).

2. Open one of the "Device Manager" methods:

• Expand the context menu windows buttons And click on the relevant item.

• Press the Windows + F key combination (to start the search function) and enter the "Device Manager" search string. Open the found file.

3. Select "Properties" in the context menu of the connected device (in our example it is a mouse).

People often are interested in what sleeper is, what it is useful, how to put a computer / laptop. As well as a lot of questions on the topic, why the computer itself comes out of sleep mode. There are many answers on this topic, but often they write incompetent personalities, in connection with which the confusion arises. In this article we will try to answer all questions regarding this option, as well as resolve the issue of self-awakening computer. So, proceed.

What is sleeping mode?

There is some confusion with modes. It arose due to the fact that their two, and not everyone understands than they differ. Let's figure out what each of them represents and determine what their difference.

1. Waiting mode. Under this title, we used to see it in Windows XP. In the seven, he got the name "sleep mode". Therefore, people and confuse, taking him for sleeping. How does he work? Computer or laptop, not so important, sent to wait. All programs that have been opened at the current time are saved in RAM, which continues to work. Therefore, if you hear somewhere that the technique does not consume electricity in waiting or sleep mode, the myth. This is an energy-dependent mode that is not very reliable. After all, it is worth stopping the receipt of electricity, and the computer will turn off. Accordingly, all the data you worked with before the departure of the computer to wait will be lost.

1. Sleep mode. In XP, he continues to exist under this title, but in Windows 7, Microsoft once again decided to show their unbridled fantasy, renaming it than finally confused novice users. Here it is called hibernation. What does he differ from waiting?

When the computer falls asleep or goes into hibernation, it does not consume energy. You can even turn it off from the outlet "You can remove the battery from the laptop," the saved working data will not be lost anyway.

Unlike expectation during hibernation, all data from RAM is recorded on hDD to file under the nameFiberfil.. sYS. . This is a special file that is created by the data storage system in sleep mode. When the computer is awakened, all data from it is returned to RAM in the form in which they were to hibernation.

With a general description, we figured out. Now you know how they act and what they differ. Now we will pay more attention to the sleeping regime in windows systems XP and 7, as in each of them the settings are slightly different. And also consider the question of an independent output from the standby / hibernation mode and find out how to fix it.

Windows XP.

Setting the sleeping mode

1. Turning on. In this system, the sleep mode for some reason is initially disabled. Include it is easy. To do this, do one of the following:

• Open control Panel, Power supply and go to the Sleep Mode tab. Next, check the box "Allow the use of sleep mode" And save the changed parameters.
• Click the mice on an empty place on the desktop and select Properties. Next, go to the Screensaver tab, open the Power item. Next, make all the same actions as in the previous method.

1. Setup. Depending on which technique you use, a computer or laptop, the transition to sleep mode can be performed in different ways.

• For a computer, you can use the corresponding key on the keyboard, as well as the power button. The transition to sleep mode is configured as follows: "Control Panel", "Power supply"Tab "additionally". Next, select an action from the list for the power button and sleep mode. Paying attention windows users XP that in some cases the sleep mode button, even if it is on the keyboard, is not displayed in these settings. To appear, you must press this key so that the system is identified. By default, it sends a computer into waiting mode.
• For laptops there are 3 ways to go to sleep mode: by pressing the power button "If it is pre-configured, a combination of FN + defined key and after the cover is closed. Actions for all above the listed methods in laptops are also configured in the power supply on the Advanced tab.

Why does the computer / laptop be coming out of sleep mode?

Such reasons in Windows XP are a bit and they are not something out of a series of outgoing.

1. The most common "strange" waken for computers is touching the keyboard or mouse. In fact, nothing is supernatural here. Just most modern computers React to pressing the keys and regard it as a signal to exit sleep. How to decide this problem? If you send the "Sleep" car, then you don't need it. Do not touch the keyboard, and better go away from the computer. :)

There are dubious programs that allegedly disconnect this opportunity, but I do not recommend using them, as keyboard spies are often sewn.

1. Some computers support automatic awakening on schedule. If this feature is not needed to you, it can be turned off into the BIOS.
2. There are many specialized programs that include and turn off the computer, and also sent to sleep and awaken it at a specified time. If you do not need it, delete these programs. But these programs do not work without the active function on / off on schedule, which is controlled in the BIOS settings.
3. If your computer is awakened and none of the above methods helps, it means that it is either infected with the virus or has failed any of the controllers. The second is more likely, since such damage is not uncommon. Contact B. service center And you will help you.

Windows 7.

Setting the sleeping mode

To not be confused, for a start we will define that in this system "sleep mode" is called "hibernation". And in the future I will use the concept of "hibernation", and not "sleep mode".

In the Seven Microsoft took care of users. Here by default hibernation is enabled. All you need to make the user is to customize it. The fact is that Microsoft takes care not only about the user, but also about saving electricity. :) By default, the computer falls asleep after 20 minutes of inactivity. In Windows XP, the automatic transition to sleep mode is initially disabled. It is not good, because sometimes you have to move away from the workplace for 30 or more minutes, but do not turn off the car. To prohibit the technique of sleeping in the workplace, open the control panel, power supply and select an active plan (most often balanced). Next, you should specify the gap through which the computer can relax, either to prohibit sleep mode and hibernation at all, setting the slider on the "Never". Then save the changed parameters.

As for the keys, by pressing which the computer or laptop goes into hibernation, in Windows 7 they remained the same. For a computer, this is the power button and the sleep key on the keyboard. For laptops, the FN combination + defined key, power button and closing the lid. The setting is slightly different, but mostly all the same. You need to open the control panel, the power item and the required plan. Next, make the required settings. Once again I want to draw your attention to the mode of modes.

Because of the turbulent fantasy, Microsoft "Sleeping Mode" developers turned into hibernation, and the "waiting mode" received the name "Sleep". Do not confuse these terms during configuration.

Why does the computer / laptop wake up?

The information below not only responds to the assigned question, but also explains how to get out of sleep mode in Windows 7.

1. If you still use a "sleep" and not hibernation, then an awakening timers may be another cause of self-exit of technology. They are disconnected in the power settings. Open control Panel, Power supply and select the plan used. Then find item additional settings Power Supplies And click his rat. After that, from the list that has opened, select Sleep and Open it. Find "Allow awakening timers" And clutching it, set the value to disable. Save all changes.

1. As in XP, the awakening is possible by pressing any key on the keyboard. If the computer was sent to hibernation, do not touch it.
2. Awakening on the schedule and the corresponding programs in the seven are also relevant. If you do not need it, simply disconnect the wake-up function in the BIOS settings and delete the programs that control these processes.

On this, perhaps, everything. This article discloses all questions regarding this option. I hope this information will be useful for you.

Of course there are some features to use the sleep mode that we now and consider, for example, why there is no "Hibernation" command in the completion menu or how to awaken the computer from sleep with a simple touch to any key on the keyboard.

Sleeping mode Windows 7

Very much comes letters with requests to show and tell you how to configure sP.practical mode on a laptop and on simple computer With installed Windows 7.. So let's start: Start-\u003e Control Panel-\u003e System and Security-\u003e Power Supply.

In this dialog box, you must have chosen Power Plan, for example, I have selected Balanced, Press Setting the power plan

Here we can choose:

Disconnect display: You need to set the time when the computer is completely inactive to disable the display, for example 15 minutes.
Translate computer in sleepmode: You can choose any time, for example, you set 30 minutes, it means that you are working on a computer, urgently left for other matters, and it was left on, after 30 minutes your computer or laptop will understand that the owner does not go to sleep mode.

When you come, you will need only to spend on the keyboard with your hand or click on the computer's power button on the power button (depending on how you set up, read on) and your laptop will immediately wake up and you can resume work from the place where you had to leave . For example, I can withdraw your laptop from the sleep mode by pressing any key on the keyboard and immediately Windows 7 restores the operation, and it is easier to press the system power button on the stationary computer.
When using a laptop, you will be still available to the function. Action at zakroar lid

if you select a dream in this parameter, then when you close your laptop, it will go to sleep, and when you open the lid and press any key on the keyboard instantly start.

In the Elektré window, the Password Request function is available, it is necessary for anything that no one would use your computer without you, while trying in any person to bring your laptop from sleeping mode, it will naturally have to enter a password.

Still in the Power tab, we can configure the parameter PI button actiontanya Computerso that when it is pressed, the computer went to Sleeping mode or hibernationAnd also completed his work. Select a parameter Nothing to do And when you press the power button with Wind OWS 7, no action will happen.

By default, the computer comes out of sleep mode when the power button is turned on, if you can configure the awakening from pressing any key on the keyboard or touching the mouse. To exit from sleeping Wind modeoWS 7 using a keyboard or mouse, you need to go to the device manager and click on the right mouse button twice the desired device and in the properties go to the tab Power management and put a tick in the point Allow this device to output a computer from waiting mode.

If a this number You will not pass, then your peripheral devices do not support this feature, and you can definitely be recognized in command line powerCFG -DeviceQuery wake_from_any And all devices will be displayed with which you can display a computer from sleep mode.

What is the sleep mode in Windows 7 from hibernation and what is a hybrid sleep mode?

• Sleep mode: The computer saves information about your open applications in RAM and enters low energy consumption mode, making it enough, but if your laptop is completely discharged, the computer will simply turn off and your open applications will simply close without saving the results of the work.
• Hibernation: The computer saves all the information about your open hard disk applications in the Hiberfil.sys file and completely turns off. The whole difference is that with hibernation, the computer does not consume electricity at all, whereas with sleep mode, the energy is still consumed. But what to enter the hibernation mode, as well as get out of it, the computer needs much more time than when using the sleep mode.
• Hybrid sleeping mode: combines sleep mode and hibernation, the results of your work in open applications are saved in RAM, but also on the hard disk and the computer goes into low power consumption mode, so full discharge Battery The results of your work will not disappear.

A simple answer sounds like this: the computer is faster in sleeping mode than in hibernation, it is also faster from sleeping mode than from the hibernation.

It is very necessary to be careful when using sleep mode with some programs, for example, if you deliver or encode video files for several hours and at this time the computer will go to sleep mode, naturally the process will interrupt the error. And when the computer comes out of sleep mode. You will have to start encoding anew, in such cases you need to turn off sleep mode at the time of operation of such a program completely.

• Conclusion: Preferably use hibernation mode if you are enough for a long time Get out of the computer. If using the hibernation mode using the computer to completely de-energize the computer, remove for example the battery, then the risk of losing open and unsaved data is missing, as the computer is completely turned off. Sleeping mode such a warranty does not give.

In the completion menu, sometimes there is no command "Hibernation?"
Hibernation may not be displayed in this menuWhen the hybrid sleep mode is enabled in the power settings. Power supply-\u003e Setting the power plan-\u003e Change additional power options, in these settings, we can prohibit the use of a hybrid sleep mode, remove the password to wake up the computer from sleep and other.

In order to find out which modes support your computer, type in the PowerCFG / A command prompt
Hibernation and Sleeping Pers do not work in Windows 7If they are disabled in your BIOS, read our articles as you get to the BIOS. Also they may not work because of the outdated drivers on the video card.