Password to reset the supra TV settings. Reset to the factory settings of the Samsung TV. Setting up satellite channels

To date, it is difficult to find a TV, which does not have a lock. Most often it is put in order to ban someone to watch it. Mostly it is designed for children, but if the password is set on LG and you do not know it, and even more so you do not have a remote control, then you will not get it to unlock, no matter how many years you have.

But how to remove the lock from the TV Hyundai, if you did it by chance, lost or broke the remote? In this case, there are several solution solutions.

How to understand what the TV is blocked?

It's easy to understand it is quite simple. Just look at its screen. In this case, the following will be displayed there:

TV Supra glow blue, and the window hangs on its screen, which requires you to indicate the password;

Instead of the window under the password, the "key" or "lock" can be displayed.

Sometimes the Akai TV can be blocked may and from the fact that the console was pressed a large number of Buttons at the same time. This will happen if you unsuccessfully sat down or reached it your child. In this case, the TV can not only be blocked, but also a setup of channels.

How to unlock without a remote?

E.if you do not have a remote control or it does not work, you need to try to do the following:

Open and carefully look for a solution to the question in the instructions. Probably tell you where the button is located, which will help reset all the settings and takes the unit;

If there is nothing in the instructions on such a situation, then you need to try to remember why he began to show the corresponding icon;

Try clicking on the TV Falcon immediately several buttons. This will lead to the transition to "Menu" mode and disconnecting the lock;

If any of your actions do not help solve the trouble - call the specialist and trust it to him.

You can also try unlock smart TV using the console remote control. If he is broken or disappeared - you need to buy a new one. Just keep in mind that universal device No channels are not suitable for switching. It is necessary to find a native one. To do this, take a technical passport with you in order to accurately indicate the model.

After you get a native goal from your device of Toshiba, it will be easier to remove it. This can be done in such ways:

Taking advantage of the instructions for your smart TV clamp certain combination Buttons or one of them and wait. Thus, blocking is removed;

Enter PIN. If you do not remember it, then with the help of the remote control, it can be reset to the initial settings.

If this does not help, then the reason is something else.

What else may be the problem?

Sanyo TV can also be blocked due to the fact that you have confused settings or have problems with the device memory. In this case, only flashing device will solve this trouble. You can do it yourself and yourself, but if you do not have experience or you are afraid that you will not cope with this task, then seek help from the service center specialists.

If you have only one channel, it is not in blocking, but what happened failure. To all revealed again, you need to configure the channels again.

Most often remove the block with modern devices From Philips, supporting smart TV function, is impossible without a remote control. The methods described in the article can help you only if it is blocked not because of the technical breakdown.

Today in the territory of the Russian Federation people are massively moving from analog television to digital. This is due primarily. high quality signal, as well as the ability to view large quantity canals. Perform the transition can owners of all modifications of modern TVs, as well as people who have obsolete TV. In such a situation, they need to purchase special receivers that will receive, and decipher signals. In the instructions, they will be able to find out how to set up a TV supra on digital television, in manual or automatic mode.

What you need

If the owner of the Supra TV plans to watch digital ChannelsHe must initially find out whether his TV is supported by this format. Information can be obtained when learning the instruction in which the manufacturer of the equipment indicates all the technical and operational data. In the case when the TV does not support the digital format, the user needs to be purchased. This device is intended for receiving, decryption and playback of signals received from regional or local providers. Connecting a digital TV consoles each person can do independently, cycling instructions.

Customizing the Supra TV for digital television should be carried out by means of a remote control. Pre-owner should check its condition, the presence of working batteries.

How to set up a new TV

No matter what tuner, built-in or external TV, the channel setup process must be carried out according to plan:

Initially, all additional equipment is connected.
Analog antenna is inserted into the TV, to the appropriate connector.
The DVD / TV key is pressed on the remote control.
After switching to reception mode television canals You need to click on the "TV setup" button.
Specifiable data on color should be displayed on the screen: background, saturation, contrast, brightness.
The user must perform all the functional settings: language, width of the picture. In mandatory, you will have to configure the main system options, in particular duplication, channel interchanges, sound, TV standard (in this case, the SUPRA TV is configured to digital broadcast).
Select additional modes: Turning on / off time, clock, sleep mode, etc.

Important! Once all major and additional options are configured on the Smart TV TV, you can start searching for digital TV channels.

Automatic channel configuration on TV

To shorten the time to search for channels, the owner of the Supra TV can do everything in automatic mode. To do this, on the remote control, you must press the "TV setup" key. Next you need to click on the "Preset" button. Several buttons appear before the user, from which you should select "Auto Searh". As soon as the system is given a command, it will automatically start to search and save digital TV channels.

Attention! The process of automatic search begins with the most low frequencies. It takes no more than 6-10 minutes. As soon as the process is completed, the equipment will start playing the first to the list of the TV channel.

Manual tuning channels

In some cases, the owners of the Supra Televisions cannot hold automatic search canals. They should use the manual mode in the TV menu by clicking on the appropriate key. To do this, you need to enter need section Settings by clicking on the "TV setup" button. Next, the manual mode is selected: in this case, "SEARH". The user should be pressed on the 3/4 buttons. The system will start searching channels, after which everyone will have to save manual mode.

Important! If the owner of the Supra TV uses outdoor tuner DVB. T2, then it is initially necessary to click on the "Menu" button. After that, "AUTO SCAN PAH" appears on the screen. Only in this case, the use of the receiver will bring the expected result.

Setting up satellite channels

To watch satellite television, the owner of TV Supra must first purchase all additional devices. Do not save on the cable, since its quality will reflect on the purity of the signal. At its ends it is necessary to install F-plugs, then connect the antenna. Next step It will be the installation and configuration of the module itself.

To set up satellite channels, you need to act according to plan:

On the remote control, you need to press the "Settings" key.
The "Settings" section is selected in the TV menu.
It is automatic or manual channel search. Only the user must specify the "satellite" subsection in the "Antenna" subsection.
In the proposed list of operators, it is necessary to choose that the module itself is involved.

Setting up digital channels

If the owner of TV Supra does not know how to configure the digital channels of the TV, it must follow the instructions:

Included in the menu.
Select the section "Channel".
Clear is done on the "OK" button.
The arrow located on the remote control, the user must go down to the "Antenna" point.
The "Cable" section is selected in the submenu.
There is a clause "Country", it indicates the "RF".

Configure cable TV

In the event that if the owner of the TV is a task to connect cable TVHe should act according to the standard scheme. Only in the "Antenna" subsection, it is necessary to specify this broadcast format (depends on the type of console): Ether (DVB-T2) or cable (DVB-C).

Setting up the old TV model

To provide the old modification of TV channels of digital television, you must purchase a receiver. With it, you can watch the essential digital television, after executing all the settings. Finding TV channels The owner of the TV SUPRA should be done by means of the remote control d / y.

How to watch TV without antenna

To watch B. good quality programs without analog or satellite antenna, the owner of TV Supra must be purchased special television console. Thanks to this device, he will be able to connect to interactive television. The connection process is quite simple, but it provides for two options:

If the receiver supports Wi-Fi, then its Ethernet cable (where the power of the amplifier) \u200b\u200bconnects through the antenna connector
The user needs to acquire special wireless media bridges.

If the TV devices are unstable, it is often rebooted, it will be possible to fix the problem, configuring the correct software. How to reset the Samsung TV to the factory settings is further in the article.

Problems in the functioning of TV appear due to violations in the laid program, which is often updated in automatic mode.

Because of this TV Samsung begins to restart often while watching television.
IN software There is also a malfunction because of the incorrect user settings of the TV.
Therefore, it is necessary not to complete reboot and firmware of the program, and TV, exposed to factory settings.

Series D.

Rollback is almost on every models of Samsung equally and in a single scheme. The difference consists only in the name of items.

Guide:

First of all, you need to open a TV section, and click on the EXIT button. Hold it for 10 seconds.
A new window will open.
To restart the system, you need to click OK.

The text on the screen will indicate that the program returned to the initial stage. Next, you can re-configure the TV. This also applies to SMART TV.
Specialists are recommended before the start of the procedure, try to update the smart TV program, and proceed to actions to roll back if this operation has not brought the proper effect.

K series

Instruction:

Through the remote control, open the menu.
Go to the TV setup mode.
Go to the "Support" point, and click on the self-diagnosis of the device.
A list of possible actions will open, where the characteristics reset action will be indicated. To roll back to factory characteristics, it must be clicked.
To confirm the operation, you will need to enter a special code - 0000.

In case of actions, the TV must reboot yourself.

J. Series

Instruction:

Using the remote control, click on the "Menu / 123" button.
A new window will appear on the screen where you select "Settings".
Going to the next page to choose self-diagnosis and "reset".
Main password - 0000, and confirm the operation with the "OK" key.

TV will start a reboot.

Series H.

To roll back the program, use the same scheme that was on the J series to select self-diagnosis, reset, and introduce pIN codeif it has not changed, then it is 4 scratch.

Series F.

Instruction:

In the left side of the screen there must be a "more" button.
Select a menu.
Go to the page in support and click on self-diagnostics.
Click on the reset function.

Syria E.

How to make a reset settings on the TV:

Using the remote control, enter the TV menu, click on "Settings" and select the Support tab.
Click on self-diagnosis, and activate the reset function. After that, the new window will occur.
Next, you need to enter a standard PIN code and confirm your action.

After turning on the TV, you can see that all smart TV settings were reset to factory.

For brands of televisions series M, Q and Ls, actions are similar. After switching to the "Settings" tab, you need to select the support menu and click on the "rollback".

Skump through Smart Hub

You can use alternative way rollback.

Instruction:

Press the SMART key remote control.
In the menu that appears, select Cancel Characteristics.
To confirm your actions, if the code has not changed, type "0000" and click OK.
TV will reboot.

After resetting the settings on the TV, all before installed applications will be removed, and account It will be reset and have to create it again. It will also work out to make the same rollback on other models - Supra, Philips, Sony Baravia, Toshiba.

In order to configure your Supra TV you need to make several actions. In the new models of TVs Supra (Supra), will not work up to configure TV to view free digital broadcasting TV channels or to view cable digital television. Also in the new line of televisions of the Supra brand there is a smart TV function.

How to configure SUPRA TV

To configure a digital TVSupra need to connect antenna cableit may be simple street or room antenna. If you want to view cable TV channels, then your TV must be connected to a cable operator network to configure the channels on the TV.

Find and click on your console MENU button so you will go to the settings menu of your Supra TV .

IN this menu You will need to do several actions.

In the county point, we choose Russia.

In point Antenna You will need to choose the desired broadcast format. Cableor Ether.

Choose Cable If you have a cable digital television DVB-C. Ether You need to choose if you have a street or room antenna for receiving digital essential television DVB-T2.

Click on the check-out point and enter the auto-tuning menu.

Select the item All Fir needs to set up all the channels and CTV and ATV, fir you want to configure only digital channels, then choose only CTV.

I confirm in the window that appears by clicking OK.

Wait until the end of the auto-job, because the setting can last minutes.

All your Supra TV is ready to view your favorite TV shows and movies.

Sometimes it happens that children or adult users by negligence include blocking on a TV or parents block the TV from children, and then make it difficult to remove it. Often the situation when the owner simply forgot the password and now he does not have to view the channels. Signs of television lock it is:

Display blue Screenwhere the key is depicted;

A field appeared on the screen where the device requests to enter a PIN code (password);

Available for viewing just one single channel.

Answering the question of how to remove the blocking from the TV, it is necessary to highlight three main options for solving this problem, namely:

Disable the lock using the remote control by typing a special combination of buttons;

Set up channels again (sometimes they can be shot down by chance or due to a software failure);

Email television memory.

Usually blocking is removed on its own, but if you need a flashing, it is better to resort to the help of a specialist. In general, for independent work The owner must have only two things - instructions for its TV and a good remote control to it. If the instruction is lost, look or download it will not work on the Internet. Regarding the TV model - this information is indicated on the back of its panel.

What to do in the standard situation

Having in the hands of the instruction to TV, you should carefully read those partitions that relate to the lock. Your task is to find a special code, a combination of numbers, after a set of which the lock is installed on the remote and removes. Also in the instructions are written actions and their sequence specifically for your model. If there are no instructions, and network access is also in this moment It is not necessary to strain the memory and remember what exactly led to the fact that the device is blocked.

From the remote control you need to press the P and + buttons by closing them at the same time. Next, you need to enter a password out of three or four digits. The type of such combinations is standard consisting of identical values, for example, 1111, 4444, 333, coinciding with the number of the most frequently used channel. Quite often used standard codes in the form of 1234 and others. After entering again, press +.

If, after these actions, unlock the AKAI TV (Akay), Samsung, LG, the Thomson models and others did not work, the password is reliably unknown, you can try other combinations, they are installed by factory settings not too complex.

There are televisions that support only one-button lock. Accordingly, to block or unlock the channels, you need to hold this button and hold five to ten seconds.

Possible problems and what to do with them

Before unlocking TV, you should first figure out the cause of the problem. Based on the practice, the most common cases are presented below:

What can be	How to eliminate
The user installed the password and forgot, does not know it (the blue screen with the key can testify to this)	Click the DISP button on the remote to ten seconds. If it does not help, use the regular console in accordance with the instructions for TV
Posted by protection from children, but lost the remote control	Without the remote, it is impossible to solve the problem, you need to find it or buy a new
TV does not respond to pressing the buttons on the remote control	Perhaps the remote has failed or sat down batteries. You should purchase new batteries or a remote. You can also use your smartphone as a remote control (if the TV is supported by such a function). You can also check the operability of the old one using the phone by holding any button and photographed the remote direct on the phone - if the micro-flash in the photo is there, the remote control. In this case, the port of the TV was probably failed and you need to call the masters.
Only one channel is available.	Probably confused channels. Master is not needed, as you can configure them yourself

Sometimes it happens that after removing the blocking, the TV channels are not configured or after it is knocked back, the television menu hangs, and other strange failures are detected. This may indicate that the tuner is faulty and the TV must be accepted again (update). For inexperienced users, it will be more expedient to contact a specialist.