Satellite television. Self-configuration of NTV channels plus how to reconfigure the channels on the satellite antenna

Ukrainians should know that in the near future their any channels will stop working. To browse them again only change the settings of satellite channels 2017 in Ukraine. The problem will be due to the fact that the technical service life of the Amos-2 satellite service has long been over. This happened back in 2016. Of course, they wanted to make a transition to another satellite from Space-Communication Ltd., which was called AMOS-6, but this simply did not happen, since the Falkon-9 rocket did not make his mission. It was she who was to withdraw the satellite into orbit, but because of a number of problems this did not happen, and she simply exploded. After the incident, long-term negotiations and discussions began with the owner of satellites to achieve an effective solution to the problem. As a result of the negotiations, it was decided that it was worth moving onto the satellite Amos-3.

So what is this satellite? Amos-3 was launched back in 2008 from the Baikonur cosmodrome. The spacecraft is located at a height of about thirty-six thousand kilometers above the ground. His launch himself occurred not according to plan because of small problems on the cosmodrome. He is a telecommunications satellite. It belongs to Israel satellite. He was trying to make as much as possible. And it is not surprising, as a considerable team worked on him, which consisted of hundreds of people. Works lasted about three years. To date, it is known that after starting the product, many contracts for rental of satellite capacity were concluded. The figure was approximately 76% of the total capacity.

The device is equipped with translational antennas, which are already four pieces. Two of them can be controlled from any point of our planet. One of the main differences in the satellite can be called the number of transponders. They are numbered here 15 pieces. Due to this, the coverage area of \u200b\u200bsome repeaters is significantly expanding. In general, the satellite represents more than two hundred kilograms for communication devices. The creation of such an amazing apparatus was 170 million dollars. It weighs more than a ton.

The device was created with the aim of replacing the AMOS-1 old satellite, which was launched more than twenty years ago. A specially created Israeli product is designed to provide communication with extremely high quality. Satellite for a period of fifteen years of non-stop service. It should make broadband data transfer to many points of the globe.

Now, when it is known that this is for the thing, I would need to know parameters of satellite channels in Ukraine 2017to receive a signal. And they look like this:

satellite name - amos-3;
location in orbit - four degrees of Western longitude;
reception frequency - 11.175;
symbolic speed is 30 msmv / c;
Error correction ratio - 3/4;
Polarization is horizontal;
The area of \u200b\u200bthe coverage - Ukraine and the other points of the globe, which was originally calculated satellite.

Six Ukrainian channels entrenched in this orbital position. Moreover, in the near future, it will also join the handful of television channels. At the moment, with satellite, three radio programs are broadcast.

Many are interested, how is happening setting the channels of satellite antenna in Ukraine 2017.At the moment, many different Internet resources have already posted special videos in which it is described how to conduct a customization procedure. This instruction is applicable to a set of models of tuners that are distributed in Ukraine. So what should I do?

Soon the old channels will stop working, and you can watch only new ones that are based on new satellite settings.

As you can see,setting the channels of satellite antenna independently for Ukraine in 2017 It does not constitute anything complicated. You just need technical parameters and make a few simple actions.

For those six channels "STB", "ICTV", "New Channel", "M1", "M2", "QTV" you need to know the frequency. As mentioned above, this is the frequency of 11.175, but in some cases you have to use the frequency of 11.176. Here, in principle, and everything you need to know about frequencies of satellite channels in Ukraine 2017.

Now, following instructions and tips, you can easily configure each of these satellite channels.

What is an analogue and why are it disconnected?

Analogue Ether is a way to transfer data using an analog signal using ground transmitting stations that distribute television programs in analog format. This is an outdated and low-quality image and sound transmission technology. Modern digital technologies allow us to transfer and take a much larger number of channels than it allows you to make analogue, besides, in much better quality. Moving forward, Ukraine has committed itself to international partners to abandon Analog Ether, as most countries of the world have done.

How to find out if the analogue ether will touches me?

If you have not changed the type of reception of the TV channels in the TV for the last 10 years, then you are likely to use analog ether. It is easy to check on the following signs.

You use the usual street or room antenna
The cable from the antenna is inserted directly into the TV, and not in the tuner (the tuner is a small box, usually black)
You are watching no more than 10-15 TV channels

If for all three items your answer "Yes" - you are an analogue user and you can soon stay without television.

What other types of reception, except analogue ester exist in Ukraine?

In addition to analogue ether in Ukraine, there are: cable type of reception, satellite, digital ether and Internet television. All this is modern types of reception, which provide a much larger number of television channels in excellent quality.

What types of reception are available to me?

It directly depends on where you live. If you live in the village of urban type, or village, then you are likely to have a digital ether or satellite TV. If you live in the city - then the choice of technology is expanding. You can learn about the possibility of connecting to cable networks, or Internet television at your place of residence.

What is cable television?

Cable TV is a method of receiving TV channels through a cable, laid in your apartment with a cable operator. Usually, the cable operator offers several software packages with different tariff plans and you can choose the one that is suitable for you. To connect cable television, you must contact the cable operators available in your settlement. You can find them on our website, or via the Internet.

What is satellite television?

Satellite television is a way to transfer data through a satellite with a subsequent reception of a digital signal to a satellite dish (plate), which is connected to the satellite tuneur of the modern TV. For satellite reception, a large number of television channels and excellent quality of picture and sound are characterized. If you want to connect to satellite television, you need to contact one of two satellite operators working in Ukraine: Viasat or Xtratv.

What is digital ether?

Digital Ether is a way to transmit a signal using ground transmitting stations that distribute television programs in a digital format. It uses the usual antenna, however, you will need to purchase a special digital DVB-T2 tuner or have a modern TV with a built-in UTB unit. You can buy it in most electronics stores, via the Internet or in the markets.

What is online television?

Internet TV is the type of transmission and reception of the digital signal using the Internet protocols to deliver television programs. To connect Internet television, you need to contact Internet providers available in your settlement, using IPTV or OTT technology. You can find them on our website or via the Internet.

It is difficult to find a house where there is not a single TV. But free channels are one, and quite another when it comes to paid satellite television. The number of tax channels NTV plus depends on the package that the user paid. But to get them, a small setting is required, which can be made independently either by contacting the service.

Then you will find the opportunity to watch your favorite films, sports programs, domestic and foreign production programs, and much more. In addition, to find out which settings are correct for NTV plus it is completely simple, because there are all instructions on the official site, and not only common, but also depending on the specific models of receivers.

Setting up satellite equipment

From how the equipment is configured, much depends, including the quality of the signal. Therefore, it is necessary to understand some of the features of the equipment installation, if the user decided to save, and do not order the services of the wizard, which he himself will install and configure. So, here are the instructions that must be observed:

Since NTV satellites are located above the equator to catch the signal, you need to send a plate to the south. In order not to guess where it is, take the compass or use the online compass by downloading this app on your smartphone. But as it concerns the angle of inclination of the satellite plates, depending on the terrain and the manufacturer, it must be somewhere within 17-38 degrees;
Carefully inspect the territory to determine whether there is no interference here. It is very simple to do it - if the review in the right direction is good, it means everything is fine, and if not, then you need to find another place with the best overview;
Try to fix the plate as hard as possible so as not to shoot down the settings. Each time you tune the channels quickly, so it is better to use a reliable bracket and use satellite TV from NTV with pleasure;

And of course, that any channel worked in normal mode it is important to choose the correct cable that will be resistant to weather conditions. It will fall on it, rain and other precipitation will fall, therefore equipment should be reliable;
The cable must be connected to the receiver, and the receiver to the TV;
Even if you do not know the exact settings, you can catch them yourself, turning the plate in the horizontal and vertical plane until the image appears on the TV screen. When there is a picture, you need to see the level of receiving the signal - it should be higher than 50%;
Log in, and get access rights to various packages. The operator helps beginners to fully enjoy broadcasting. On the account of the newly registered user there is a small amount that pays for the broadcasting of the standard package - it remains only to configure the channels.

When the operation of "Contract Registration" is passed, then the access card activates their work, and for a day, a person can see what a provider prepared for new users.

Setting the NTV Plus Channels

At the moment there are several ways to configure channels from the NTV Provider Plus. Distinguish the two most popular options.

Automatic setting that looks like this:

Enter the menu using the remote control;
Find there subsection "Search channels";
Press it and follow the search status. When it is over, all channels will start showing.

Manual TV configuration has such specifics:

First you need to reset the dishes. This is done in this way: "Setup" → "Default Setting" → "Channels" → "Antenna" → "Satellite Setup";
Prefix will need to enter a password. Boldly enter four zero, but only if this option was not changed;
After that, when manually searching for TV channels on the NTV plus, it is necessary to remove ticks opposite the satellites, which is allowed by selecting only the one with which the NTV company works. In this case, this is EutelSatW4 36E. Sometimes it happens that the service under consideration is locked by the tuner or TV itself, and to open access you just need to remove access card and insert it back;
Next, you need to configure the transponder. Here are the settings: 12130 R and LNB levels (lower \u003d 0; upper \u003d 10750).

When the whole procedure is completed, you can go to the final stage: Select the transponder and set the Search Network command. After you need to wait, because the setting passes long enough. But if all the changes were correct, after half an hour you will earn all the paid TV channels.

Setting up NTV channels Plus East

The NTV television company Plus is one of the most popular on the territory of Russia, but in the eastern part of the country with broadcasting there were interruptions that resolved with the help of the new Package and Satellite "Express AT1". Change occurred in 2014, so in 2017 users have been able to enjoy the excellent broadcasting of popular channels and not only.

If for some reason your equipment does not want to receive a signal that comes from this satellite, you can hold a manual search of the TV channels after entering the settings. It is not so difficult, because the reconfiguration can be carried out manually. Soon, television will start working in standard mode, pleaseing the audience with a full package of TV channels.

So, to gain access to the package, you need to check the satellite settings, and if there is no, then to begin to enter this satellite, and then fill the broadcast parameters. Instructions How to configure channels simple:

Open the receiver settings through the remote control and the "MENU" button;
Turn on the search for NTV channels;
Go through the "Settings" - "Installation" - "Password" - "Search mode" - "Enable";
Enter the transponder parameters: Frequency - 12475; polarization - left; Transmission speed - 27500; broadcast - DVB-S2; Modulation - 8PSK; FEC: 5/6;
Check "Level" and "Quality" of the signal. Click on "Search" again;
Wait for the results and save them.

TV channel 1 + 1 And all channels of the group 1 + 1 media change the parameters of broadcasting from the satellite. Or rather change the satellite and go with AMOS-2 4 Won satellite Astra 4a 4.8 E.

TV channels 1 + 1, UNIAN, PLILLUS, KVARTAL TV and Biguchi. already available from the satellite ASTRA 4A 4.8 Eand broadcast in test mode until December 12 (extended until March 1), and after on an ongoing basis. But on Amos 1 + 1 will be available until February 15, 2017. Later, the broadcasting of the media group will completely go to Astra (former Sirius).

New satellite parameters and frequencies for configuring TV channel 1 + 1 (1PLUS1) and the entire media group

Broadcast parameters 1 + 1

ASTRA 4A 4A 4.8 satellite

Frequency - 11766 H 27500 3/4

11766 MHz, polarization horizontal, symbolic speed 27500 Mbps, FEC-3/4, DVB-S / QPSK

Satellite change and broadcast frequency is related to the completion of the satellite operation AMOS-2.

Previously, some TV channels have already migrated or still broadcast from two satellites.

You can also see the broadcasting parameters of previously migrated TV channels.

Information is confirmed by the official executive director of the media holding and already on TV channel 1 + 1 broadcasts the video of the change of broadcasting on the satellite.

StarlightMedia goes to another frequency.

Also important news for the audience TV channels STB., ICTV., New Canal, M1., M2., QTV. Which in 2017 from March 1 go to a new frequency from Amos 2 satellite on Amos 3. and thus remain on Amos.

New broadcasting parameters of TV channels STB., ICTV., New Canal, M1., M2., QTV.

Amos-3, 4W

11175 H 30000; 3/4

Also, all TV channels inform about changing the parameters of broadcasting from the satellite and many are sent by reference TELEMASTER COM UA (Telemaster Kom Yua). Where text and video instructions are provided for self-reconfiguring channels or search for a wizard in its region or settlement.

If there is a complex lesson for you to configure the channels, then contact the wizard. So it will be more reliable and better.

Or how to customize the TV channel curlers, Kiev STB and others on their own.

From March 1, 2017, reception and viewing of satellite channels of Ukraine 1 + 1, 2 + 2, TET, PLILLUS, 1 + 1 INTERNATIONAL, UNIAN TV, curiosity will be possible only on Astra 4A satellite. To further browse channel data, you must reconfigure your equipment.

Technical parameters for all channels of group 1 + 1 media (ASTRA 4A):

Satellite - Astra 4a (Ses Sirius)

Frequency - 11766 MHz

Symbolic speed - 27500

Polarization - horizontal (H)

So, independent setting of satellite channels of Ukraine:

1. Press-changing.

6. In the drop-down list, we find the frequency of 11766/27500 H, and "OK".

Network Search - On
Click "OK" to search.

You still need to add, and then scan on the Amos 4W satellite, the frequency 11175/30000 / h, for this:

1. Press-changing.

2. Allocate "Installation" and click "OK".

3. In the "Satellite" line - choose Amos 4W and "OK". Other parameters are not needed.

4. To edit, press the yellow button at the bottom of the remote control.

5. We allocate, that is, we step by the cursor on the "TP number" string and click "OK".

6. In the drop-down list, we find the frequency of 11175/30000 H (the next cycle: 11140/30000 / H), and "OK". If there is no such frequency, it should be added (Green button) and save.

7. Press the red button at the bottom of the console to search for programs.

8. A window appears in which you want to set the search parameters.

Search mode - open or FTA (to search only open programs)
Program Type - TV Channel or TV Channel + Radio
Scan Type - Manual Search
Network Search - On
Click "OK" to search.

Everything! The search is carried out. Found programs will appear at the bottom of the list of programs in the All Satellites folder.

However, following this instruction, we will find a group of programs only at one specified frequency. And if the list of programs has not been updated for a long time, I would advise you to scan the entire satellite. It's very simple!

For this:

1. Press-changing.

2. Allocate "Installation" and click "OK".

3. In the satellite line, select Astra 4.8e, or may be called Sirius 4.8e (Sirius) and OK. Other parameters are not needed.

4. To edit, press the yellow button at the bottom of the remote control.

5. Press the red button at the bottom of the console to search for programs.

6. A window appears in which you want to set the search parameters.

Search mode - open or FTA (to search only open programs)
Program Type - TV Channel or TV Channel + Radio
Scan Type - Manual Search
Network Search - On
Click "OK" to search.

Everything! Setting up satellite channels of Ukraine Completed (for more detailed configuration, follow transponder changes). In this way, you can update programs on Amos 4W satellites, and hotbird 13e.

After scanning, enter the channel edit menu and remove the unnecessary and inactive programs.