Television prefix for digital television MTS. How to connect and configure equipment for satellite TV MTS. Description Services and Cost

Linear consoles MTS TV

Receiver Skyworth HSD11.
Cost 3000r.

Receiver AVIT S2-3110.
Cost 3000r.

TV reception in DVB S / S2 formats.
MPEG 2/4 compression support. and Hevec.
Broadcast channels in HD and FULL HD.
Outputs: HDMI, RCA, S / P DIF, USB.
MSD processor 5029.
Audio playback - video
Files with flash card.
Teletext, telegead, subtitles.
Parental control.
Display.
Connection connectors:
HDMI is a modern standard.
RCA - Connecting to a kinescope TV.
USB - firmware, playback.
S / PDIF - digital sound.
Slot for sim card MTS TV.

Interactive MTS TV Receivers

Receiver Dune HDTV 251-S.
Cost 3000r.

Receiver Huawei DC 300A.
Cost 3000r.

Support for DVB S / S2 formats.
MPEG 2/4, Hevec compression principle.
Play HD and Full HD.
Port Internet 100 Mbps.
EDGE, HSPA, RCA, YPBPR, HDMI.
USB connection.
Broadcom processor,
Stih 237, MSD 5029.
Video on Vod request.
Repeat tv Catch up.
Record PVR content.
Pause TimeShift.
EPG telegete.
Parental control.
Subtitles.

Module itself Ci + MTS TV

Irdeto module itself
Cost 3000r.

Comax module itself
Cost 3000r.

MTS TV follows the capabilities of modern TV and releases
Device to view channels, it replaces the MTS TV receiver.
The module is inserted directly into the technical connector.
TV, this circumstance has a positive effect on
Ease of use, you absolutely do not need care
about the location of the receiver when the TV hangs on the wall,
install extra shelf
Connecting and electrical wires that will be
Spread the aesthetic view of your interior.
The main advantage that bowes to buy a Ci + module
MTS TV, this is the ability to sort the list of channels by
Your discretion, also switch programs you can
directly from the remote control of your tv and of course module MTS TV
Let you open to view the channels in UHD quality.
For advanced receiving channels of MTS TV using the module
You must when buying a TV, pay attention to
The following specifications:
DVB S / S2 Formats Support
Decoding in MPEG 2/4, NEVEC
Slot CI Common Interface

Characteristics of Receivers

All satellite MTS TV receivers are made of high-quality matte
plastic facial panel is usually glossy, it gives receivers
More beautiful view, from controls there are buttons
Volume adjustment, channel switching and on / off, for information
On the mode of operation of the receiver responsible LED, red - receiver in
Standby mode, green - enabled. When using MTS consoles
The subscriber receives high-quality equipment with optimized
interface, a powerful processor that allows you to comfortably use
Services of satellite television MTS TV such as: View channels,
use telegead with program program, write to third-party
Media of the MTS TV program, followed by viewing at a convenient time.

Media-Player _ Playing files from a USB device connected.
TimeShift _ Pause in broadcasting, followed by playback.
Local RVR _ Online recording of gear or on schedule.

Interactive television

If you bought the interactive console of MTS TV and connected it to the Internet,
you have significantly expanded its functionality, you are along with opportunities
Linear television, additional services will be available.
For you, MTS TV has prepared the following chips:

Playing more than 200 channels.
Repeat and record programs.
Telegead over the entire gear grid.
The ability to read files from external media.
Weather, currency rates, cards on your TV screen.
Selection of catalog movies.
Interactive services: plugs, currency courses and so on.
TV pause.
Parental control.

In our country there are several providers providing satellite television services. MTS not so long ago reserved to niche market. Due to the attractive conditions for the acquisition and installation of the company's equipment, it is possible to connect new subscribers daily into the regions included in the satellite coverage area.

The equipment offers the operator itself, it is possible to purchase in specialized stores. New subscribers require the installation of a satellite disk with a converter, as well as connecting and configuring the MTS TV console.

Before you are addicted to the connection of satellite TV from MTS, you need to make sure that the place of residence is included in the coverage area of \u200b\u200bthe provider satellites. You can use the card where different shades of the red signs are indicated. Under the appropriate level of the coating, you should select an antenna of a certain diameter according to the principle: Low level (light-red on the map) - larger diameter of the plate.

Another important technical aspect that should be taken into account - selecting a satellite plates So that the digital signal does not experience obstacles to the receiving antenna. The direction in which the antenna must be rotated to directly "see" satellite signals.

As for the choice of equipment for satellite TV, in addition to the antenna of a suitable diameter with a converter, depending on the television receptionist, the subscriber needs to be purchased by the appropriate device.

Self-module - This option can only be used for some models of modern TVs equipped with a DVB-S tuner.
Interactive consoleoperating in the full options for browsing interactive television in the coating zone of 3G MTS signals.
Universal equipment - satellite console MTS. This linear HD equipment is compatible with most Russian TVs.

Overview of applications for configuring satellite plates

Masters of satellite TV equipment are used to properly install an antennas special device, which costs a lot of money. When skill and desire, you can use the installation and setting of the plate on your own:

mobile applicationwhich is determined by GPS and the camera and indicates the direction to the satellite relative to the presumptive location of the installation;
gPS mode - Programs, calculating on a specific algorithm for the corners of the turning plate and the converter;
master Settings on the map on the site RU.

To help in properly configure satellite dishes, several special applications have been created. Some of them through official app stores apply to a free basis, some required a certain payment. The most often use the following GPS programs:

SatFinder, Satellite Director can be installed and used for free;

Multifide, DishPointer Pro - Paid Mobile Software.

DISHPOINTER PRO V 2.2.2, Android

Each program has its own advantages and disadvantages, but with the main task - assistance in choosing an antenna direction to the satellite - they cope. Instructions for finding the location of the satellite and turning the plates on it in detail may vary.

MTS company on its official website in the "Satellite TV" tab invited the opportunity to carry out the calculations of the necessary settings on the map. From the subscriber you need to go to the menu item "Settings" and enter the address of the location. The system will display the calculated indicators and on the beam map will show the direction to the satellite relative to the specified address.

Communication antenna, receiver and television

The next step after installing the antenna - the communications of the devices with each other by cables. The cable coming from the satellite plates is connected to the receiver's antenna jack. To connect the MTS console to the TV, it is most often used by HDMI cable: most modern TVs are equipped with the appropriate input. In the absence of HDMI output on the TV, then as an alternative, depending on the availability of connectors, you can use:

tV SCART output and the corresponding SCART-RC cable;

outputs RCA and RCA cable (tulips);

coaxial TV cable 75 ohms.

For example, to connect the Samsung S2 3900 to the Samsung TV, you can use HDMI or RCA cable. This console is equipped with appropriate nests. Which cable to use depends on the TV model.

If the subscriber has two televisions, and there is no technical possibility to install an additional satellite plate, you can use the following options for communicating TV - receivers with one antenna:

- through the use of a signal cable splitter (crab, splitter);

using the installation on the converter plate with two outputs;
through multiswatch transmitting a signal to one or more receiver.

Important! All options are assumed to have a receiver for each TV.

In the first connection option you will need to purchase cable Digital Signal Divider With one input and two outputs with a bandwidth of 5- 2400 MNZ, as well as the corresponding cable thickness of the connection method: screw clip, thread, coaxial socket, using soldering.

Tip! When selecting a splitter, attention should be paid to the signal attenuation indicator: the lower, the better.

It should also be responsibly referring to the definition of the location of the tee, trying to minimize the distance from the sediment of the cable signal to the TVs to avoid the attenuation of the signal.

When choosing a second option you need to purchase Converter Equipped with 2 Outputs (There are more complex modifications with 4 and 8 outputs) and the desired number of cable meters. Installation with this method is more complicated: two cables will be put on the room from the antenna. Also, this option is more costly, but excludes the effect of attenuation of the signal.

In the third case, the connection must be purchased multisvitch. This is a device that allows you to receive a signal from one or more satellites and transmit to several independent TV consoles. The method is relevant for large country houses and mini-hotels to connect more than 8 TVs.

Activation of TV consoles and channel configuration

After the physical connection of satellite equipment, you need to perform the activation process. It is assumed that the smart or SIM MTS card is inserted into the slot of the console. When activating the provider connects a contract of a specific subscriber with the ID number - the number of its equipment, and the coded channel decryption key is sent to the card. After activating the prefix, a specific period decodes the specified package of channels provided for under the contract, and further controls payment.

Several activation options are provided: through the dealer network (the equipment was bought at the dealer), the call to the MTS contact service, sending SMS messages from any operator number to number 9909, indicating the card number and the attachment ID.

When you first turn on activated satellite equipment, you need to configure the MTS TV console. After turning on the console, some time should wait until the system is loaded and the signals will be installed. Next, you need to turn on the TV and translate it aV or HDM reception mode (depending on the cable connection of the receiver and receiver).

The system will prompt the "initial installation" menu. Here you need to select the parameters of the image, the menu language, as well as if necessary, you can reconfigure other parameters set by default. To perform channel search, you need using the remote control of the console or buttons to control the MTS Prefix without a remote control to the "Start Search" menu item and initiate its execution (press the corresponding button on the remote or panel of the console). In the search process the list of found channels is formed. In the generated list of the list, the user can configure the channels so that they follow the sequence in the desired one. For this, the corresponding functionality of TV - consoles is used ("program editor") and remote control.

In the Settings menu, there is a "Basic Settings" menu, with which you can configure the clock and time zones, as well as set the shutdown time of the console. There is also another functionality, relating to the type of choice and the order of sorting channels and so on.

Installation, activation and configuration of satellite equipment is a matter of time consuming and requiring certain knowledge and skills, with the insufficiency of which it is better to resort to the help of specialists.

MTS provides not only mobile communications, but also home Internet with interactive satellite television. When using the latter, installing special equipment is required, which will allow access to TV broadcasts. Users who have decided to use the services of the submitted operator and connect TV, should know how the MTS DS 701 must be connected and adjusted.

The receiver in question is required to provide an acceptable signal and a comfortable viewing of entertainment resources. Today, when connecting a satellite TV, the operator issues the CASTPAL model. Below in detail we study the question with connecting and setting the parameters.

Let the operator company try to promote interactive television, but the model under consideration refers to the linear type of consoles. That is, the equipment does not need a sim card. The main advantage that users singled out is the larger coverage area than the hybrid TV cannot boast, which allows you to view online services.

In other words, the enlarged coating area becomes a decisive factor for many users. After all, the tariffs offered with the prefix are distinguished by low prices, and the linear connection will provide the ability to install satellite TV in any country house. For the city, subscribers prefer to choose an interactive (hybrid) television.

Characteristic

Technical parameters DS701:

DVB, RCA, HDMO, S / P DIF connectors are provided.
A USB port is also installed, which will allow you to connect other devices and view your own movies.
The MSTAR 7S75 processor is embedded, which supports most of the formats, including H.265 / HEVC.
As a software installed - IrDeto.

The maximum available permission in which you can view channels and movies - 1080p. Among the additional functions are provided - subtitles, telegead demonstrating the schedule of gears, parental control and others.

Equipment

The package includes:

The cost depends on the configuration. For example, today the operator offers the following options:

3400 rubles for the prefix without antenna.
3990 rubles with antenna, the size of which is 0.6 m.
4490 p with an antenna 0.9 m.

How to set up the console MTS model DS701 - Step-by-step instruction

Setting up the MTS DS701 console is not distinguished by complexity. Any inexperienced user can cope with this procedure, simply following the instructions:

Connect the console to the TV and network.
Next, run the telly and the receiver itself.
The system will show the menu where you must specify the time and other items.
Then select "Automatic Channel Search".
When the system can cope with the search for available channels, restart the receiver and telly.

How to connect the SIM card MTS in the prefix model DS701

Satellite TV MTS prefix The DS701 model is linear, which eliminates the installation of the SIM card. Therefore, the connection of the presented equipment will not cause you problems. Connect it to the network and run. No SIM cards makes it impossible to use interactive functions. But, but, your coverage area is more, due to which the picture quality is better.

Common mistakes

Sometimes users face problems. It is not necessary to carry the technique for repair or buy a new receiver if an 8888 error appeared on the screen. It indicates an unsuccessful connection or incorrect work of software. It is necessary to check how well cables are connected well and correctly.

The second solution to the problem is to reset the parameters to the factory version. Also widespread error "no channel", which may occur due to incorrectly indicated frequencies, when the user independently search and configure the channels. Other reasons are associated with a non-payment of the subscription payment or the absence of the desired package.

A rather unpleasant situation when after the work day we go to the sofa to view the TV, and there are no pictures. The causes of the absence of a signal can be the most diverse. Sometimes for simple reasons, users begin to "beat the alarm". Ultimately, the cause of the "problem" situation was not included in the receiver network. The other reason "no signal" is also popular. Moreover, the absence of a signal gives the TV itself, and not the receiver. This is due to the wrong tuner connection to the TV. For example: "Tulips" can be connected to the AV2 interface when the mainstream settings are AV1 or vice versa. As a result, it shows on the screen "No Signal". Solving the problem is elementary - just change the switching AV2 to AV1.

Before you figure it out how to configure the receiver from MTS, we list other reasons for a bad signal.

How to connect the MTS receiver

What do you want to make first work? - Enable the console, pre-connecting the cable. Also, the prefix is \u200b\u200bconnected directly to the TV. Insert the SIM card into the console.

We list the tuner connection algorithm:

Insert the SIM card.
As soon as the card is inserted, initialization will start (waiting for its completion).
The next step is the passage of authorization (on the screen it will be indicated how to do it).
Upon completion of the authorization, create a profile, the data entered must be saved.
To limit access, it will be sufficient to enter your password and save it.
In automatic mode, the channel scanning will begin, after the screen will appear a list of TV channels found.

How to set up a standard console

We are convinced that the prefix is \u200b\u200bnot included in the network. Insert the SIM card into it.
Turn on the prefix in the network.
We find a flashing green lamp on the device if it does not burn - press the green button on the remote control.
Next, make the launch of the TV. It should work in AV or HDMI mode.
Then you need to open the standard settings menu. There is an opportunity to adjust the size of the picture (screen resolution), set the language and much more.
How to start searching channels? - We are looking for a "Start" button on the remote control and confirm the action by clicking OK.
Upon completion of the search automatically gives one of the found channels.
Make sure the prefix is \u200b\u200bauthorized. If not, contact the operator. Since the found list of channels will be available within 5 days.

For questions no longer arise and you did not spend time on other sites, consider setting the module.

Turn off the TV with outlet. Next, connect the cable to it, which comes from the satellite antenna. This provides a special "Satellite" connector.
Also, a module is inserted into the TV port where you want to insert a card. After all this cord from the TV is connected to the outlet.
The "Module found" string is displayed on the screen. So that the TV channels can be viewed, you need to select the DVB-S2 broadcast and configure it. The configuration process is carefully described in the instructions for the TV.
Viewing TV channels from MTS implies the choice of the DVB-C signal, indicating several parameters. Quick search, 298000KHz signal frequency, QAM64 modulation, enter the character speed of 6875kps.

Once all the specified steps are completed - the broadcasting of the channels will begin. Setting up the MTS TV receiver is not so difficult, as it seems at first glance. But if the difficulties arose, then the exit from the situation will be an appeal to the operator, which will tell you the necessary and useful information.

Video

Digital TV proposed by MTS features high quality and characteristics. Find out what options digital TV from MTS and how to configure it yourself.

Modern digital networks are not only the Internet or transfer of purely service data. By using various technologies today, you can broadcast anything. Using the TCP / IP protocol, a telephone connection is operating today, the quality of which has risen to unprecedented heights. New, purely digital services appeared.

But the most common thing, which is literally "on the hearing" - broadcast television channels. MTS Home Digital TV is another kind of such a service from a major mobile and cable service provider.

When the question is what MTS is homemade digital TV, you can simply answer. This is standard IPTV, simply organized at the same time as simple as possible for the end user and is somewhat uncomfortable for those who are used to "break everything" and use the service is not intended. To understand difficulties and features, let's see how everything is arranged.

GPON technology. To provide the service "All in One", the company uses a new approach. The apartment enters the cable for which the GPON format signal is broadcast. This technology one by one cable by splitting can be transferred at once - telephony, IPTV from MTS, Internet and other services. The apartment houses a prefix that divides the signal. From it the cable goes to the computer, TV, telephone.

The total bandwidth of 1 Gbit / s is achieved due to the fact that the fiber optic channel comes into the apartment. With today's level, such a digital abundance is enough to simply organize.

IPTV MTS. The transmission of digital broadcasting channels is standard. However, MTS has become interesting. IPTV MTS, transmitted using GPON technology, has a clear frequency range and more like cable television. IPTV PlayList at MTS as such does not exist. But it can be created or found on the Internet the results of the operators who scattered the entire "digital transmission band" and stretched out the list of channels from it. You can already find all the basic IPTV Playlist for the services that MTS itself offers.

The number of users who have already connected the "Home Digital TV" service from MTS is already quite large. Moreover, the popularity shaft increases so quickly that the operator simply does not have time to connect subscribers. The majority of negative feedback are connected with this - the arrival of the staff, which will connect and configure the new TV new generation, will have to wait quite a long time. Otherwise - the quality of the broadcast is excellent.

There are reviews that there are Channel drawders - users really much and, naturally, in some areas of network bandwidth for digital TV lacks. It is expressed in the image of the image when the picture becomes "from the squares" for a second of a second, or the effect of a stop frame is observed. However, problems arise very rarely and then - at certain hours of day with peak activity of users.

How to configure

If you order a digital TV connection, everything will do the company's staff. Specialists:

will lead the fiber optic line to the apartment,
connect the conversion of the conversion,
cut the cable to the computer and TV.

However, you can do it yourself. The company has taken care that it is easy to configure both the TV with the module itself and the television console.

TV setting is carried out so. A digital tuner from MTS company is inserted into the TV. After that, the setting is made similarly to the cable TV channels. A fixed frequency range is indicated and a search is made. The module itself automatically compiles its own IPTV PlayList. You can, as well as for ordinary channels, set up the order. After that, you need to disable the listing of the list and the formed IPTV Playlist will never change. In case the provider adds additional channels, IPTV MTS can be adjusted again.

Setting up the console for all devices that the company provides the procedure as simple as possible. The first inclusion and searches of the channels calls a request to update the device firmware. With this procedure, the prefix automatically receives everything at once - setting up, IPTV Playlist, preset services, and so on. If this happens, you can run the update manually. The process of the process depends on the specific model of the console. The MTS website has detailed instructions, how to make settings for all models supplied by the company. As I say reviews, no problems with the procedure do not arise.

Capabilities

Services and services provided by MTS as part of a home digital TV package, are quite standard for television of this format.

Several sets of channels with the highest quality image and sound. Available both free included in the subscription (about 80 channels) and thematic sets of television programs.
Each broadcast is available television and brief announcements of gears.
There is a service "Content to order". You can individually make a list - movies, transmissions, serials that will be provided only to a specific user for a fee. You can see them at any convenient time.
Naturally, there is a weather forecast and some Internet services, currency rates, for example.

As part of the "Home Digital TV" service provider gives to choose from:

Self-module. Designed for use in modern TVs with CIA port. This is the easiest appliance that adds the functional TV.
Initial level prefix (SD). The simplest decoder that allows you to connect any TV with analog audio and video inputs (tulips).
HD device. These devices allow you to watch an image in HDTV format, have new generation exits. There are HDMI, SCART, RCA tulips and digital sound output.
HD HD Prefix. All types of outputs are already presented here, television recording is available, there is your own inner player.

Another device for a truly integrated solution is a router from MTS. It supports a wired Internet network, equipped with an antenna for 3G, works with homework, has a large radius of Wi-Fi, provides the ability to streamline information encryption and is fully ready for operation in MTS networks.

For homemade craftsmen

Naturally, the question arises - is it possible to watch IPTV MTS on a computer or use the wrong console that the provider offers?

Can. The computer will need found on the open spaces of the IPTV PlayList network. It can be written independently either by means of simple busting, upgrading by manually any playlist added to the playback program. This is a process of long and painstaking, but effective. The same playlist can be used in consoles that allow you to specify IPTV Playlist to form a channel list.

For familiar with programming is still easier. A elementary script is written, which scans the entire strip and highlights the channels. Unnecessary can be selected and form a playlist only with those channels that need. In a word, home digital TV from MTS is suitable for self-configuration.

Companies managed to create a proposal that is suitable for absolutely everyone. Reviews show that here is a very convenient organization of services, good channel indicators, a large model range of equipment, within which you can choose the best option for price / quality ratio. In addition, the broadcast technology is not complicated, you can watch television programs on a computer or use third-party equipment.