What is Windows 7 performance index. What does the Windows performance index mean. Real increase in productivity

From time to time you have to update the computer "iron". To know which component needs to be replaced, the user must know the estimated state of all components. For this purpose, the performance index is intended. Details on how to find out the performance index in Windows 7, raise its value and solve possible problems With his definition, read in our article.

What is the performance index?

The tool is aimed at assessing how good or well the computer works with the system. But this is not an average of all components. The final assessment is determined by the smallest indicator among all nodes. Each component has its meaning. Looking at them, you can determine what exactly needs to be replaced.

How to calculate it

Through the "Start" open "Control Panel" and click on the "Counters and Productivity Means" icon.

Click on "Counters and Means of Performance"

This window contains both separate estimates and the overall indicator. If recently one of the nodes has been replaced, you can see how the index has changed. To do this, click "Repeat the rating." Perhaps the system will ask the user to enter or confirm the administrator password.

In the example below, the "processor" component and "main hDD»Have high performance. But due to the fact that "graphics" and "graphics for games" have low indicators, the overall rating is also low.

This window presents a total performance rating and each component separately.

What the points mean

The higher the evaluation, the better computer Changes with tasks, especially, resource-intensive. Low indicator, respectively, speaks about the opposite.

A modern computer is a complex device, the total performance of which depends on the set of factors. The speed of the hard disk, RAM, the power of the video card is often becoming more significant than clock frequency central processor. Intuitive work rating windows systems It may approximately point to the problem, but accurately calculate the weak points and you can only find a solution using the performance index.

What is the performance index

Microsoft for calculating the system performance indicators uses test tasks that extremely loading each computer component of the computer separately. In this way, five indexes are calculated: for a central processor, graphics, graphics for games, RAM and the main hard disk. Little of them is considered a basic index for the entire system. The scale begins with 1.0, the highest score - 7.9, but it rises as more productive hardware solutions appear.

The base index is close to the average of a balanced universal computer, since all estimates in such a configuration are approximately equal. For specialized hardware solutions, deviations are characterized. For example, in office computers A weaker video card is usually installed, and a more speed hard disk is important for multimedia solutions. In such cases, the overall computer index will be significantly lower than the average, since it is determined by the smallest value. From here, a simple rule should be: to increase the base index (and overall computer performance), the power of the weaker component should be increasing.

If the hardware requirements for the installed software indicates the minimum value of the base index, then it means that it will work steadily on a computer with such or higher indicator value.

How to learn it

To see what kind of performance index from your computer, open the "Start", then the "Control Panel".

In the "All Elements of the Control Panel" locked in the big window, find the "Counters and Productivity Means" tab and go to it.

The same result is possible to achieve using a system search. Click "Start" and enter the word "counters" in the search bar.

Another way to immediately go to the desired window - Press the WIN key combination (with windows icon) and Pause / Break (the service key, usually located next to Print Screen).

The "Evaluation and Increasing Computer" window that opened a lot of information.

The central part occupy the current indexes of computer components with brief description. The overall rating is largely highlighted and is equipped with a comment on the calculation "determined by the smallest rating." Multiple buttons lead to reference materials: "What do these figures mean?", "Learn more about assessments and software (on the Internet)", "Recommendations for improving computer performance". Windows 7 is trying to clearly explain the principles of the formation of estimates, and optimal methods for increasing the base index. This window is especially useful when updating the computer's hardware, since it stores indexes from previous testing. You can use a special button "Display and print a detailed information about computer performance and system" print current indicators, after which new testBy clicking on the screen button "Repeat the rating" in the lower right corner.

The same button should be pressed to start the current check, which usually takes a few minutes. The computer at this time works at maximum power, the screen goes out several times and lights up again, which is a consequence of running tests and does not represent danger.

What the points mean

Possible maximum score

Although on this moment Windows declares the maximum score of 7.9 points, it is possible to achieve this value only in the maximum configuration using the most modern processor, memory and graphics accelerators. The need for such powerful equipment usually occurs in computers intended for resource-intensive applications - games, systems virtual reality etc. For specialized solutions, lower base index indicators are considered normal.

Table: Points and performance description

Point	Description
Up to 3.0	Office packages, network work. Some graphic windows features 7 (form style Aero) will be unavailable.
From 3.0 to 4.0	Graphic windows interface 7 Available, however, can slow down or pick up when starting in Full HD mode, as well as on multiple monitors simultaneously. If the overall rating is low due to graphic parameters, the computer may not cope with streaming video, for example, when receiving high definition television.
From 4.0 to 6.0	Windows 7 can work in full force, including in multitasking mode and using multiple monitors.
More than 6.0	Powerful computers with high-speed hard disk. Can be used for three-dimensional games, high-definition streaming video, resource-intensive tasks.

Given the methodology for the formation of the index (by the smallest indicator), there are no clear boundaries between configurations. The same index value may be powerful computer With a slow hard disk, and at a balanced weak hardware solution.

How can I enhance the assessment

An obvious way to increase the overall performance of the computer is to update the weakest nodes. RAM can be replaced by a faster or simply increase quantitatively. The same applies to a hard disk. On the desktop computer You can also replace the video card or processor. The laptops have significantly smaller renewal. A more economical way is to configure the system and its individual components, allowing to eliminate some restrictions in their operation.

Setting graphics

Visual effects, high screen resolution, working with multiple connected monitors take a significant part of the resources of computer graphic nodes. Therefore, reduce the load on this component and, accordingly, improve overall performance, you can disconnect some of the Windows 7 options or reduce the screen resolution.

To change the graphics settings, you need to press the right mouse button in the free area of \u200b\u200bthe desktop. In the open context menu, select the "Screen Resolution" string.

The "Screen Resolution" window that appears and other parameters of the connected monitors have also contained, for example, graphic design (themes). Now we choose the drop-down list "Resolution".

From List possible options The permissions are chosen lower than the current one.

Hard disk care

Cleaning from unnecessary information and maintaining enough free disk space Can significantly raise the speed of the drive. In addition, if there is not a solid-state, but a regular disk on the computer, then it is necessary to regularly carry out a defragmentation procedure. This operation combines the scattered parts of the stored files, collecting them together, thereby reducing the reading and write time. Your reading device needs to spend less effort to go from one part to the other if they are located in a row. In addition, the free space is combined, allowing new files to be recorded in a whole block.

Press the "Start" button and in the input row, type "Disk defragmentation", after which we select the tab that appears with the same name.

The system shows all available drives in one window, allows you to analyze their condition and make immediate defragmentation.

For regular work, you can configure the appropriate schedule to, for example, run the utility at night.

Defragmentation takes considerable time if the hard drive is big, and there is little free space on it, so it is recommended to pre-remove not necessary information - It will speed up the work.

System Care

Timely update, replacing drivers on topical, use special programs To detect problems in software, the software is also important for the index. To update the driver of the selected device, you can use the system interface.

Press the "Start" button and in the input row, type "Driver Update". The system shows the search results, including the tab "Updating device drivers" tab, on which we turn.

The main window "Device Manager" contains a list of all hardware components installed on the computer. Choose the one whose driver we want to update, and click on its name the right mouse button.

Selecting the "Update Drivers ..." string from the context menu, run the process. The system in the next window will propose to choose one of two options: automatic search on the Internet or manual search on the computer.

An ordinary user rarely loads new drivers to the computer, so we choose " Automatic search... "And waiting for the update. Windows 7 checks the relevance installed Driver And if necessary, updates it. The same steps should be done for other devices from the "Device Manager" list.

There is also a lot free applications, including those who do not require installation that perform the process of checking and updating the drivers in semi-automatic mode. For example, DriverPack Solution Initially scans the computer and constitutes its own list of hardware components and drivers. The program refers to device manufacturers sites and checks the availability of updates, after which downloads and installs new drivers. The application has a simple and friendly interface designed for an entry user user.

Changing power settings

For more economical windows work 7 sometimes deliberately reduces performance. For example, it concerns power settings. You can donate part of autonomy (for a laptop) or energy savings, prohibiting Windows 7 to go to the appropriate modes. To do this, in the search bar, type "MOBILITY CENTER" and select the appropriate tab.

In the window that opens several settings. We are interested in the power parameters that choose high performance mode. It is necessary to take into account: the battery consumption will increase somewhat, which will reduce the battery life of the laptop.

Using the ReadyBoost function

Free space is not only on the rigid disk, but also on external media, including USB flash drives. ReadyBoost Allows you to reserve it some part for the needs of Windows 7. To enable the option, you need to select a replacement media in the conductor and right-click the context menu in which to select the option "Properties". Now it remains to go to the READYBOOST tab and set the size of the reserved space.

If performance estimate does not work or disappear

In some cases, the system refuses to evaluate performance due to considerations of savings or more serious obstacles.

It's time to look for malfunctions

Possible reasons for the fact that it was not possible to evaluate:

• Evaluation is already running. The ability to update estimates is turned off at the time of operation of the test. You should either cancel the current process or wait for its completion to start it again.
• No access rights. Sometimes the reason for the restriction of the user's rights to the specific account. You can log in on behalf of the administrator and try to spend an assessment again.
• The laptop is disabled from the network. Since the calculation of indexes involves a significant consumption of energy, Windows 7 prohibits it to produce when autonomous work laptop. You should enable the computer into the outlet.
• Lack of disk space. For windows estimates 7 requires a certain amount of free space on the hard disk to which the test file is recorded. It should be cleaned as much as possible the drive, after which it again try to conduct an assessment.
• No multimedia support. Windows 7 cannot assess the performance of computers that are not able to work with multimedia.
• Outdated video driver. A defective or outdated video driver will not allow Windows 7 to check performance. Check out latest updates systems and if necessary to install actual versions Drivers or, on the contrary, return earlier. When installing drivers, it is better to use the official website of the manufacturer of your computer, and not, for example, video cards.
• The work of antivirus. Sometimes the cause becomes active antivirus software. It follows to turn off their work on time and try to spend the test again.
• Outdated BIOS. You should update the BIOS to the latest version.

Reinstall codecs for video

A frequent cause of the problem is damage or conflict codecs for video. These are files containing video unpacking algorithms, without which the computer will not be able to display the video on the screen. To analyze graphic performance windows components 7 uses some of the system codecs, so their damage or accidental deletion makes it impossible. Reinstallation will correct the situation.

Press the "Start" button and in the right column of the opened menu, select the "Control Panel" tab. In the large "All Control Panel" elements, select the "Programs and Components" tab.

We delete video players, as well as codecs to them.

Press the on-screen button "Enable or disable Windows components" and go to the Windows Components window.

We find Windows Media Player., Remove the label near it, after which we leave from the dialog box and reboot the computer. After the download is completed, the same way go to this window, return the mark on Windows Media Player and reboot again. We try to test again.

If the problem is not solved, the reason may be damage or the absence of the VC-1 codec required for testing. It can be installed together with free k-Lite package For the popular KMPlayer player.

Scan system files

Another reason may be the failed Windows 7 due to damage or delete some necessary system files. We press the combination of Win + R and in the input row that the "Run" window is typing the system scanning and updating the damaged SFC.EXE / SCANNOW files.

Installation of additional components

One of the reasons for the inability to determine the performance may be the absence on the MSVCR100.dll library computer. You can download it for free from the official Microsoft website with Package 2010:

• https://www.microsoft.com/ru-ru/download/details.aspx?id\u003d5555 - x32, x86.
• https://www.microsoft.com/ru-ru/download/details.aspx?id\u003d14632 - x64.

If Visual Studio. 2010 is already installed, but when I try to define performance, the system reports problems with MSVCR100.dll, you should reinstall the package, previously removing it old version from a computer.

Video: All you need to know about the performance index of Windows 7

Focusing on the performance index of performance when buying a computer, it should be noted that the current estimate is stored on a computer in a non-protected form in the C: \\ Windows \\ Performance \\ WinSat \\ DataStore folder in the file, the name of which starts from the dates of testing, and ends ". Formal.assessment (initial) .winsat.xml. The unscrupulous seller can change the real numbers to the desired values \u200b\u200busing an ordinary text editor. Therefore, you should conduct an actual test before purchasing.

In Windows Vista, for the first time, such an interesting utility appeared as Productivity index. With it, you can see the Evaluation of the Windows system on various criteria. Subsequently, this feature moved to Windows 7 and Windows 8, but then the developers decided that it is not needed and therefore in Windows 8.1 you will not be able to find it so simple. However, many users liked such a function, in part in order to face pussies to find out who is cooler. In this article, you will learn a little more about the index (estimation) of Windows performance, as well as Consider how you can still know it in a new windows version 8.1.

Performance Index (Windows Experience Index, WEI) - This is the assessment of the Windows system itself the main characteristics of the computer on which the OS is installed.

Main characteristics, it is:
CPU
RAM
Graphics
Graphics for games
Disk subsystem

As you can see, the most important characteristics needed for performance.

Each of this characteristic is given its index (number) which is calculated by the special formula. Minimum value 1 and the maximum depends on the version of the OS: in Windows Vista it 5.9 in windows 7 7.9 , and in windows 8 9.9

Of all these estimates, the minimum value is selected and indicated as the main estimate. Why did you do not know, perhaps that users tried to increase it, paying attention to the minimum value.

How to find out the rating (index) of performance in Windows 7 and 8

Click PKM P. My computer and choose Properties.
In this window, pay attention to Evaluation In category System:

click on the link Windows performance indexTo learn more detail.

We get this such picture in which everything is already painted:

It happens that the score has not yet been done then it will be necessary to do it. You can also double-check if something has changed in the system.

How to find out the rating (index) of performance in Windows 8.1

As I wrote above, in this version of the system you will not be able to find performance, but it is still there.

We go along the way (letter_disk_s_vinda): \\ Windows \\ Performance \\ Winsat \\ DataStore And in this folder we are looking for a file that contains the letters Formal.assessment.

Explanation:
(letter_disk_s_vinda) - It is usual C. . You can go on to folders along the path, or you can simply copy and paste into the address string of the conductor.

The file that we need starts with numbers. They mean the date and time of creation, as well as other "nonsense." About the name of him 2014-03-21 12.02.02.533 Formal.assessment (Recent) .winsat.xml
It opens through (usually Internet Explorer).
If there are several such files, it is better to open the latest by the date of creation.

An open file is the following form:

We need to pay attention to the characteristics that are between WinSPR tags.

I will decipher a little that as it is designated.

SystemScore. - overall productivity
MemoryScore. - Estimation RAM
CPUSCORE. - Processor performance
GraphicsScore. - graph performance performance
Diskscore - Disc score

There are a few more, but they are not needed. Can you translate yourself if you want.

If you think this option is unnecessarily time consuming, you can use and introduce into it
Get-CiminStance -ClassName Win32_Winsat
As a result, performance estimate will appear in Windows 8.1:

It happens that you will not be able to find this file or will not withclude an index. This may mean that he has not yet been held. If in Windows 7 and 8 it was simply declared, then in Windows 8.1 you will need to keep some commands to the command line from the administrator. Namely:

winsat Formal - factory overall system performance;
winsat Formal -V. - assessment of overall system performance, detailed conclusion;
winsat Formal -XML file.xml - output the result of the check in the specified XML file;
winsat Formal -restart Never - when re-inspection, to evaluate only new components;
winSat Formal -restArt Clean - When repeated check, to reset the history of inspections and complete checks.

It is better to use the first.

In course, the window will be like this:

There are also the same programs that will help check the performance index.

Chrispc Win Experience Index

WSAT.

I even liked the second, because it does not require installation, Russian-language, as well as shows another additional necessary information on the system and gland.

How to enlarge or improve the index (rating) of Windows performance.

The answer to this question will give you both the system itself and ordinary logic.

As a rule, everything consists in replacing the "spare parts" of the computer. If the small processor index is changed to a more powerful, if there are few RAM - increase.
It happens less often when everything seems to be fine, but the index is small. Then you need to produce.
If a small evaluation of the disk - we delete too much, we produce, etc.

That's it. On the one hand, the performance assessment is the desired thing, it helps to understand what you need to pay attention, based on the low index, and on the other it is not needed if you and so you know that your computer is weak or the disk space is little \u003d)

One of the indicators that allows you to estimate the power of the computer and its willingness to cope with certain tasks is the performance index. Let's learn how it is calculated on the PC with Windows 7, where you can see this indicator and other associated with it, nuances.

The performance index is a service that is designed to help assess the user's hardware characteristics of a particular PC to know what software For him, it will be suitable, and what it can not pull.

At the same time, many users and software developers are skeptical about the informativeness of this test. Therefore, he did not become a universal indicator for analyzing the system's capabilities regarding a certain software, as Microsoft's developers were calculated, introducing it. Failure prompted the company to refuse to use the graphical interface of this test in later versions of Windows. Read more Consider various nuances of applying this indicator in Windows 7.

Algorithm of calculation

First of all, find out what exactly the criteria is calculated by the performance index. This indicator is calculated by testing the various components of the computer. After that, it is assigned to them points from 1 before 7,9 . At the same time, the overall assessment of the system is exhibited by the smallest score, which received a separate component. That is, as you can say, according to its most weak link.

• It is believed that the computer with a total productivity of 1 - 2 points can support common computing processes, surfing the Internet, work with documents.
• Starting from 3 pointsPC may already be guaranteed to support AERO's theme, at least when working with one monitor and perform some more complex tasks than the PC of the first group.
• Beginning with 4 - 5 points Computers correctly support almost all the features of Windows 7, including the ability to work on multiple monitors in Aero mode, play high-definition video, support for most games, performing complex graphic tasks, etc.
• On PCs that have more score 6 points You can easily play in almost any modern resource computer game. with three-dimensional graphics. That is, a good gaming PC, the performance index should be no less than 6 points.

Five indicators are estimated:

• Ordinary graphics (productivity of two-dimensional graphics);
• Game graphics (productivity of three-dimensional graphics);
• Power processor (number of operations performed per unit of time);
• RAM (number of operations per unit of time);
• Winchester (data exchange rate with HDD or SSD).

In the screenshot at the top, the basic computer performance index is 3.3 points. This is due to the fact that the weakest component of the system - graphics for games, was assigned precisely than a score of 3.3. Another indicator that quite often demonstrates a low estimate is the rate of data exchange with a hard disk.

Performing productivity monitoring

Monitoring system productivity can be performed different ways. This can be done with third-party programs, but there are more popular options for performing this procedure using the built-in system tools. More detailed with all this you read in a separate article.

Improving the productivity index

Now let's figure out what ways to increase the computer performance index.

Real increase in productivity

First of all, you can produce an upgrade of the hardware component with the lowest estimate. For example, if you have the lowest score on the desktop or games, you can replace the video card to more powerful. This is definitely a general performance index. If the lowest assessment refers to item "Main Hard Disk", you can replace HDD to faster, etc. In addition, an increase in the productivity of the disk sometimes allows its defragmentation.

Before replacing a certain component, it is important to understand, or whether it is necessary for you. If you do not play games on your computer, it is not very reasonable to buy a powerful video card only in order to increase the overall computer performance index. Increase the power of only those components that are important for the tasks you run, and do not look at the fact that the overall performance index remains unchanged, as it is calculated in terms of the smallest assessment.

Another one effective way Increase productivity assessment is to update outdated drivers.

Visual increase in productivity index

In addition, there is one tricky method, of course, objectively not increasing the productivity of your computer, but allowing you to change the value of the displayed estimate to any you consider the desired. That is, it will be an operation for a purely visual change in the parameter being studied.

1. Go to the file location folder with information about the test. How to do it, we talked above. Choose the latest file "Formal.assessment (Recent) .winsat" and click on it PKM.. Go to it "To open with" and select "Notebook" Or any other text editor, such as NotePad ++. The last program, if it is installed in the system, even preferably.



2. After the contents of the file open in a text editor in the block "WINSPR", change the indicators enclosed in the appropriate tags, on those you consider necessary. The main thing is to remember that the result looks realistic, the indicator enclosed in the tag "SystemScore"must be equal to the smallest of other indicators. Let's set all the indicators of the greatest value possible in Windows 7 - 7,9 . At the same time, the point should be used as a fractional separator, and not a comma, that is, in our case there will be 7.9 .



3. After completing the editing, do not forget to save the changes made in the file using the tools of the program in which it is open. After that, the text editor can be closed.



4. Now, if you open the computer's productivity assessment window, then it will display the data that you contributed, and not real values.



5. If you wish again, the real indicators are displayed, it is enough to start a new test. in conventional method through graphic interface or through « Command line» .

Although the practical benefit from calculating the performance index by many specialists is questionable, but, nevertheless, if the user will pay attention to the indicators specifically necessary for its work, and not chase for the assessment in general, the result obtained can be effectively used.

The assessment procedure itself can be made, both using the built-in OS tools and using third-party programs. But the latter seems unnecessary in Windows 7 with its own convenient tool for these purposes. Those who want to get additional information can take advantage through "Command Line" Or open a special report file.

Windows performance index Defines the capabilities of the configuration of the equipment and software of the computer and displays them as a number called the basic value. A high base value usually means that the computer will work better and faster, especially when performing complex tasks that require many resources than a computer with a lower basic value.

Each component of the equipment receives its own subenode. The basic value is determined by the smallest. However, subcenters show how the most important components work, and helps to decide which of them need to be updated.

The overall assessment of the computer can be used when purchasing programs and other software that corresponds to this assessment. For example, if the overall score of the computer is 3.3, you can buy any software developed for this version of Windows that requires a total rating of 3 or less.

The current range of estimates is important from 1.0 to 9.9. Windows performance index is designed with further development computer technology. Since the speed and performance of the equipment are improved, the rating range will increase. Standards for each level of the index as a whole remain unchanged. However, new tests can be developed that will reduce the assessments.

To view the basic index of the computer

1. Open the performance management tool dialog box.
2. See the basic value and substallation windows performance index For your computer. If new equipment has recently installed, and you need to check, the overall rating has not changed, select Repeat estimates. If the subsyna and the overall rating are not displayed, select the command Rate this computer.

About the basic computer performance index

Evaluation reflects minimum performance Systems Based on the capabilities of various components of the computer, including rAM (RAM), Central processor (CPU), hard disk, overall performance of graphics playback on the desktop and the ability to play volumetric graphics.

Below is a general description of the capabilities of computers with the specified base values.

Computer performance with a total estimate from 1.0 to 2.0 It is usually sufficient to complete the majority of general computing tasks (for example, to perform improved office performance and search on the Internet). However, a computer with such a general assessment as a whole is not enough powerful to work in Aero environment and to implement additional multimedia features available in Windows.

A computer with a total estimate of 3.0 It can work with Aero and many Windows 7 tools at a rue. Some extra windows 7 can only work in limited functionality mode. For example, a computer with a general estimate of 3.0 may display windows theme 7 resolution of 1280 × 1024, but hardly execute this topic on several monitors. Or can reproduce the contents digital televisionBut hard to reproduce high definition television (HD-television).

A computer with a total estimate of 4.0 or 5.0 Can perform new windows Apps 7 and support the execution of several programs at the same time.

A computer with a total estimate of 6.0 or 7.0 It has a quick hard disk and can implement calculations with a large volume of graphic operations (for example, a game on several participants, surround game graphics, as well as recording and playing HDTV content).

If a separate program Or the operation of the Windows 7 system requires a higher value than the existing basic value of your computer, you can increase this value by updating the equipment. To check if the base value has changed after installing the new equipment, select Research Research. To learn more about the hardware on your computer, select View and Print Details.

Substations of the index of the computer

Substations are the results of checking the possibilities of RAM, CPU, hard disk, overall performance drawing graphics on the desktop and components of the equipment of the game bulk graphics on the computer. If the overall assessment is not sufficient to perform a specific program or work in Windows, you can determine which components to be updated.

The basic value is a good indicator of computer performance. With the help of subtlety, you can determine the level of computer performance when performing individual tasks:

• Productivity of programs Microsoft Office. . If the computer is used mainly to work with office programs (eg, text editor, spreadsheets, email And to view web pages), then you need high subsyna for the central processor and memory. For desktop graphics and volumetric graphics, supremacy with a value of 2.0 or higher.
• Games and applications with large scope of graphic operations. If the computer is used for games and programs with a large volume of graphic operations (for example, for digital video editing programs or realistic games with first-person presentation), then we need high subsyna RAM, desktop graphics, surround game graphics and a central processor. Subsalue 3.0 or higher is usually sufficient for the hard disk.
• Possibilities of the media center. If the computer is used as a media center for additional multimedia tasks, such as HDTV programs, high-seated central processor, hard disk and schedules on the desktop are needed. For memory and volumetric graphics, 3.0 or higher is sufficient.

Why Windows does not update the equipment rating

The circumstances listed below may interfere update Windows Performance Index.

• Battery powered. Windows automatically tries to save energy when power is used only from the battery. So, if the computer runs from the battery, performance estimates will not affect its true possibilities. Connect the computer to the electrical network and run the estimation.
• Lack free disk space. The Windows Performance Index Evaluation Tool creates a test file on the hard disk. If there is not enough disk space to create a test file, the assessment will not be completed. To free up disk space, you can use a disk cleaning agent.
• Evaluation is already executed. If the product rate estimation means Windows already Performed, the estimates will not be able to update.
• Driver Display Outdated. If the computer uses the old version of the display driver, it is possible that the estimates will not be able to update.
• There is no multimedia support. If the computer does not have multimedia SupportThe estimates will not be able to update.