D LINK DIR 300 does not enter the settings. Use the network cable

In general, the explanation of various moments of configuration of the D-Link instrument is given by our edition is not very easy. One router is produced with various modifications that, in turn, may have absolutely different firmware. Therefore, a universal order of action, which would come absolutely for all devices, no. Nevertheless, many users choose solutions of this manufacturer. Especially greater love of Russian users won the D-Link DIR 615, 300, 320 models, etc. Of course, in the process of work sometimes incomprehensible situations arise.

Today we will find out why users sometimes cannot enter the router interface on the example of the D-Link DIR 300. This can manifest itself when you enter the address bar of the address 192.168.0.1 to the address bar when the control interface does not open. In some cases, the entrance to it is not possible, since standard password Admin is not suitable. In order to solve these problems, you can return to factory settings, according to the instructions presented.

Today we will try to solve the problem with the input in the router interface when the following errors appear when entering the standard address:

• page does not open;
• the page is not available;

Frequent entry error in personal Area Router and other mistakes in the general article :.

In any case, the user cannot access the router settings, as it just does not have the ability to enter a login and password.

Consider the most common cases when the transition to the router settings is impossible. Note that if these tips did not help you, and you still can not open the settings interface, most likely, the problem is related to the hardware fault. It is better to use a guarantee for the device if it is still valid. You also need to look at the indicators of your router model. If data indicators and connections do not burn, most likely our tips will not help you.

Now need reset the settings for this instruction - .

Wireless connection

Make sure the connection is available. If a wireless connection is established with the router, you can learn about this by the presence of such a badge (it is not necessary to worry if the icon with a signal level is blocked by an exclamation mark).

Cable connection

If the device is connected using a cable, make sure that it is integrity. From the side of the router, the cable must be installed in the LAN connector and go to the connection connector network controllers Computer. If there is a connection, such an icon should be displayed:

In addition, you should not neglect the features of obtaining the IP address for your router. In the settings of the network connection, make sure that iP and DNS addressed the address automatically. Detailed information on setting up connections is given. Here you should pay attention to checking the features of issuing IP addresses if the input of the router settings is not possible.

In the event that these instructions did not help solve the problem with opening the router setting interface, you can try to do this using another Internet browser. You can also try to connect the device to another computer. It can also be done using a mobile gadget connected via a Wi-Fi interface.

If it is impossible to set up a router, the problem is most likely associated with the physical failure of its nodes.

The instructions will show the basic characteristics and help customize the router. D-Link Dir-300, proper setting Even such a budget router will help organize a full-fledged local network at home, and when buying a more powerful router, D-Link DIR-300 will expand the infrastructure, becoming an excellent addition to a new device.

Before setting up D-Link DIR-300, you must connect the router by the following scheme:

• The provider cable coming from the panel in the entrance is connected to port Wan.which may be called "Internet".
• The laptop connects to one of the LAN ports of the router. By default, these 4 ports are equivalent if this DIR-300 has not previously contained a VLAN configuration.

Reset

When connecting the former D-Link DIR-300, problems often arise both with non-working ports and with the input to the GUI interface. To correctly configure such a router, you need to start with a rollback to factory settings: Press the RESET button, which is located on the housing near the power connector, and hold it for 15 to 20 seconds.

RESET RESET button directly to pCB D-Link DIR-300, so an excessive force cannot be made when you press: it will bring a router in order!

Restoring factory settings will also help if custom router settings are shot: the preset D-Link DIR-300 configuration should be downloaded only after rollback to the original installations.

A detailed description of the methods for restoring the factory configuration is presented in a separate instruction.

Computer settings

The computer from which the modem configuration will be performed must receive its local address when you turn on the DIR-300 power. To do this, you need to bring network card PC to the automatic configuration mode.

1. Through the connection icon, which is located on the taskbar, you can log in network settings OS.

2. Then, go to the local connection properties.

3. In TCP / IPv4 properties, you need to install automatically checkboxes.

Log in to the router interface

To log in to d-LINK settings DIR-300, you need to dial the network address of the router in Chrome or IE.

If the PC setting is performed correctly, loaded main page GUI router and a request for authorization in D-Link DIR-300 will appear.

If it occurs difficulties when installing a computer connection with a router, you should use.

Configuring Internet Connections

D-Link DIR-300 supports all types of connections carried out by Russian providers. Before you configure the router, you need to prepare a contract to correctly enter credentials.

Connection to D-Link 300 can be performed in two ways:

1. Automatically using the Click'n'Connect utility. This option is well suited for the types of IPOE and PPPoE;

2. Manual setting It will be preferable to automatic connections using the VPN server: L2TP and PPTP.

If you need to configure the D-Link DIR-300 router for Beeline and Rostelecom providers, use these instructions.

Wi-Fi Setup

D-Link DIR-300 is equipped with a N150 wireless module with 2 DBI antenna. In a small room, the router provides a stable coating. You can configure WiFi both manually and using the built-in utility or WPS protocol.

• Manual configuration makes it possible to select a channel, high-speed mode and transmitter power, allowing you to easily configure the router for specific operating conditions.
• The WPS protocol is supported by both TVs and mobile gadgets, connecting devices to D-Link 300 without entering the password.
• Automatic adjustment of the secure WiFi network of the router is performed using the built-in "Master" D-Link DIR-300:

More detailed information how different ways performed wiFi Setup D-Link 300 is contained in this manual. It also presents recommendations for improving the coating and wireless speed of the router.

Routing

The network setting has ceased to be the prerogative of Gicks and Iustoms: a huge selection of devices designed to make a better life of an ordinary person appeared on the market.

The homemade fleet of network devices may include both "PC + smartphone + apad" and media server, game console, TV, IP camera and even a refrigerator, and the router is a heart home network. To configure it - it means to connect these devices to D-Link DIR-300 physically: wires or via WiFi. And then ensure interaction between them and the Internet, setting the rules for access and broadcast on channel and network levels.

The DR-300 DHCP server distributes all IP address devices and can work both in dynamic and static mode. You need to configure static addresses to register the route, since the router should not be associated with a permanent local IP address with the MAC address of the specified device.

Setting the DHCP parameters in the D-Link D-300 is made on the "Network - LAN" tab. Here are the pool of addresses and configure Mac / IP bundles.

Setting the routing rules is available on the D-Link DIR-300 D-Link Interface tab "Advanced Routing".

Setting up VLAN.

Most new revisions modem D-Link DIR-300 Support VLAN - network separation technology to logical segments. The setting is performed on the "Advanced - VLAN" tab.

VLAN is used to combine devices into target groups, optimize traffic and access distribution.

For example, you can select a children's computer in a separate VLAN router and add a WiFi segment so that the child can connect a tablet or a phone to the D-Link DIRK 300: with any connection, it is connected to, such a router configuration will provide the view, protected content filter.

The reason for using VLAN can also be the installation of an IPTV console. If the provider supplies a taked traffic, then one of the interfaces rOTETER D-LINK The DIR-300 will have to combine with a WAN port in transparent mode.

Setting up ports d-LINK router The DIR-300 for this scenario is described in the instructions on the example of Rostelecom television.

Firewall and Nat.

To configure remote access as home computerUnder the network storage connected to the DIR-300, an understanding of how the router carries out network protection mechanisms.

In a broad sense, under remote access It is understood by any traffic initiated from the outside towards the home network and the router. So to organize a game or FTP server.By providing connection from remote machines, some configuration of D-Link DIR-300 must be performed.

NAT is a mechanism broadcasting addresses so that the Internet hosts do not see the real structure of the home network on the other side of the router, and process all traffic from local computersSeeing only an external WAN IP address. Thus, NAT in D-Link DIR-300 protects against network attacks, preventing direct access from outside to the internal addresses of devices.

But at the same time, the router will prevent if you need to provide friends with access to FTP folders with photos or to play space. To configure the broadcast rules for NAT in the DIR-300, you need to redirect ports.

To configure the ports of the router, you need to go to the D-Link DIR-300 settings to the Virtual Servers tab.

+

There is another problem: the router receives a gray WAN IP provider, which is constantly changing. Do not have a permanent address, connect to D-Link DIR-300 remote computer It will not work, since the destination address is always different.

To solve this problem, the DDNS technology is used, allowing you to assign a dynamic IP permanent domain name. The DDNS service in real time updates information about changing WAN IP and provides continuous binding to the domain name.

Firewall is a set of traffic filtering rules based on criteria such as: address, port, protocol direction. The filtering of the D-Link DIR-300 firewall is carried out after decapsulation, routing and NAT processing.

Remower the firewall router allows on the "Firewall - IP filters" tab.

Network Expansion

Wi-Fi router D-Link DIR-300 supports client mode. This means that both with a cable and WiFi, you can connect the DIR-300 router to the upstream router to expand the existing network.

First you need to log in to the settings. In D-Link DIR-300, this feature is on the WiFi - Client tab.

A check mark "Enable" transfers the router to the client mode, and the "broadcast wireless" option allows you to connect WiFi devices to D-Link DIR-300 as a relay.

From the list of available networks, you need to select the appropriate SSID name of the higher router and log in, and in the network parameters set the name of the current network, password and encryption method.
If a wifi password is changed on a higher router, the D-Link DIR-300 client settings will have to reinstall. Therefore, that the router worked as a client without interruptions, it is recommended to fragment a wifi network and use one of the segments as a bridge.
Now it is necessary to configure the D-Link DIR-300 router modem to the device connected to it as the device client have access not only to local nodes, but also on the Internet.
On the DIR-300 tab "Network - WAN", you must specify the ascending direction of the WAN through the WiFi-Client interface and set the routing type used in local network.

The DIR-300 setup is accompanied by reboot notifications after each change in the configuration.

Found a typo? Highlight the text and press Ctrl + Enter

Frequent user question: why can't i go to wi-Fi settings Router at 192.168.1.1 or 192.168.0.1? And indeed, quite often the user cannot go to the router settings, because an error is issued:

Http://192.168.1.1 Web page is not available

Address to enter the settings

In fact, the address of the web interface of your router will not necessarily be either. These are just the most frequent IP addresses, and that if no one has changed it. In this article we will tell about all sorts of causes of the entry problem in the settings and how to solve it.

What is a router?

To begin with, let's see what a router is. If someone still does not know, the router (it is the router) is a device that serves to connect to the Internet of several devices simultaneously. If you connect your provider's cable directly to the computer (without a router), the Internet will work only on this PC and to connect to the network of all other devices you will have to configure. And if you have a router in the room, the provider cable is connected to its WAN port, and all other client devices are already connected to the router - one with Ethernet cables, others - via Wi-Fi. If you are expressed on your fingers, then the router is a kind of "splitter of the Internet connection", as a filter extension agent in the case of electricity.

To enter the router settings, any browser is used - Chrome, Opera, Firefox. In order to go to the settings, you need to enter a special IP address to the browser address bar. Most often these addresses - 192.168.1.1 and 192.168.0.1, but there may be others.

Unfortunately, people often have problems with entering the router settings to these addresses. And if you can't get into the web panel of the settings, you will not be able to nor nor the network. There are many reasons for the problem. And in this article we have collected all the reasons known to us and their decisions.
Today we will answer such questions:

• How to configure a network card to enter the web interface for 192.168.1.1 (192.168.0.1)?
• Why can not go to the settings of the router, modem or access point?
• In which cases, when trying to open the page settings page 192.168.1.1, the "page is not available" appears?
• Why when trying to enter the router settings (modem, access points) moves to google search or Yandex?

Which IP address of settings at the default router

The factory address of the router settings can be found:

• in the instructions

The instruction always comes in a set with the device or in paper form, or in the form of a PDF document on the disk, and very often both. In addition, the setup instructions can always be downloaded on the official website of the router manufacturer (access points, modem).

• on the sticker

Usually, it is located on the bottom of the hull or on the back of it. Here is an example from the D-Link DIR-300 router:

And the TP-LINK TL-WR841ND sticker looks like:

Which IP will register on the computer to go to http://192.168.1.1

For initial setting The router needs to be connected to any LAN port with a computer network card:

And to enter the settings interface, it is necessary that the IP address of the network adapter lay in the same subnet as the address of the router. Most routers by default is on DHCP server.. This means that in the settings of the computer's network adapter, you can only specify the receipt of IP automatically.

To do this, right-click the network icon near the clock and select Network and Shared Access Control Center:

• Click the link called your network connection.
• Choose Properties.
• Highlight Internet Protocol version 4.
• Press the button Properties.
• Set both switches to the position Automatically.
• Click OK:

But when setting access points, repeaters (repeaters) or other network equipment, you need to assign the IP address manually to the computer, which is called "Aypishnik Vilk" on the jargon of sysadmins. Go to the settings and manually assign the address network card. For example, if by default at the IP router 192.168.1.1, assign network adapter Any address from the range of 192.168.1. 2-254 With the passage mask 255.255.255.0 :

Accordingly, in order to access http://192.168.0.1, you need to register (for example) 192.168.0.24

Log in to the router settings

Why does not open address 192.168.1.1 (192.168.0.1) and an error appears?

So, at first we will analyze the situation when an error seems to be displayed instead of the page settings of the router Web-page is unavailable:

1. You enter an invalid IP address.

Your router has a different default address (for example, 192.168.0.1, and not 192.168.1.1) or the address has been changed to another in the settings (for example 192.168.0.254).

Decision

Find out the current IP of your router. This can be done both with and with on iOS or Android:

Enter correct address settings in the address bar in format http://192.168.1.1

2. The IP address of the router lies on another subnet

This often happens after changing the IP of the router or if the address of the computer is manually configured.

Solutions

Option 1. If you know the IP router, set the address from the same range of the computer.

Option 2. If you do not know, follow these steps:

• • Make sure the computer is connected to the router LAN-port.

• Install automatic receiving network settings.

• Browse the network connection information. The address of the gateway and will be the router address.

• Enter the correct IP into the browser string.

3. The browser includes a proxy server

Here also applies included tURBO mode In Opera or Yandex Browser, as well as various applications and expansions, changing IP - for example. In addition, the browser can be infected with malicious software. With all these circumstances, attempts to enter the control panel to the addresses 192.168.1.1, 192.168.0.1 or any other may result in an error.

Solutions to the problem

• • Turn off Turbo.

• • Disconnect the proxy server. You can also try to install a tank Do not use proxy for local addresses Either add the address of the router to exceptions.

• Check your computer to viruses with and.

4. Network interface disabled

• Turn on the network interface.

To do this, enter Control Panel - Network and Internet - Network connections - Change adapter settingsRight-click on the desired interface and select Enable:

• Switch the patch cord into another network card if you have several of them.
• Install last version Drivers for a network adapter.

5. Reconnected router or a network cable problem

Check the power and integrity of the patchcord. Try replacing the cable:

6. To enter the router settings, a non-standard port is used.

In the settings of many routers (for example, popular tP-LINK manufacturer) You can specify not only the address, but also the port by which the configuration web interface will be available. If the port is not standard (that is, not 80s), then to enter the settings you will need to specify its number through the colon after the address. For example:

Http://192.168.1.1:43011

Therefore, in this case you have three outputs:

• find out the port number in a person who set up the router;
• try to go to the settings using the host name, for example tplinkwifi.net(Naturally, if you have a TP-LINK router). You will be redirected to the correct IP address and port (usually 192.168.0.1);

7. Malfunction or router failure

Reset the settings

Signs that the router is defective:

• no internet and network;
• no indicator is shining;
• it is impossible to enter the settings.

Does not enter 192.168.1.1 (192.168.0.1) with iPhone and Android

A very common error when trying to go to the router settings from the phone: when entering the username on the iPhone and Android, the first letter is entered in the form of the title. This leads to an error " Invalid name user or password"And you can't understand what's the matter. In order to enter the login correctly:

Why, when trying to enter the web interface, settings moves to Google or Yandex

1. You enter 192.168.1.1 without http: //

some browsers instead of switching to http: // will transfer you to search for numbers:

Dial in the URL address bar, starting with 'HTTP':

Http://192.168.1.1

2. commas instead of points

If you dial in the Russian layout, the commas may appear instead of points:

192,168,1,1

In this case, you will also redirect to the search engine.

Enter the correct URL to the browser address bar from http: // and click ENTER:

3. Letters instead of numbers in the IP address

Sometimes for an incomprehensible reason (most likely, of course, from ignorance) people introduce the letters "I" instead of units. As a result, instead of the ip-address, it turns out incomplete 192.168.i.i or 192.168.l.l and then fall into the search instead of the router settings page.

The most common addresses, logins and passwords

For novice users: If you do not have stickers on the router, there is no instruction, the Internet does not work, etc., these are the most common details of the default.