Change Windows 10 autorun settings. Where is the startup folder? We place a label for autorun

When you connect to a computer for removable media, such as CD, DVD, a memory card and a USB flash drive, a pop-up window appears, called "Auto Tap", which automatically defines the type of removable device and offers you several standard actions. If you find it irritable, you can always disable it that I will give instructions in this article. And also how to enable it or configure in Windows 10.

How to enable or disable auto start in Windows 10

I will show you three ways to do it in Windows 10. The first method is carried out through the menu Start\u003e Settings\u003e Devices. Select Autorun on the left side of the window, and you will see the "Use autorun for all media and devices" switch, which you can turn off or turn on if necessary.

In addition, in the same window there is a "Select Default Parameters" section where you can configure autorun separately for each type of device or a specific device (connected). It can be a removable medium (flash drive), a memory card or your smartphone for which you can set the parameter from the following options:

• Do no action
• Open folder to view files (conductor)
• Ask every time
• Configure this media for reserve copy (File history)
• Configure storage settings (parameters)

So you can disable the option for all media and devices (main switch), and at the same time set up so that it worked only with specific device or certain types.

You can also hold the SHIFT key and connect the device to open the autorun window (regardless of the settings installed).

The second way is to take more subtle control over some types of media, such as CD, DVD. Blu-ray, etc. To do this, open the control panel. In the View option, select "Large icons" and press autorun.

Put (or remove) the "Use autorun for all media and devices" checkbox to enable / disable the option. Scroll down, and also, as in the previous part of the article, you can set the default action for each type of media and device. At the very bottom after all parameters and settings, you will see the "Restore Default Values" button by clicking on it, you will return all the values \u200b\u200bto the original state.

Automotive settings windows are almost identical in Windows 7, 8 and 10. But unlike Windows 7, a few more items have been added to Windows 8 and 10 with the settings of such types of media as a camera memory and removable discs.

For most users, they specified above 2 ways are quite sufficient to disable or configure autorun to their requirements. But if it is not enough for you, or you want to disable autorun to other users on one computer - you can do it with.

To do this, open the Run (Win + R) window and enter "gpedit.msc". In the Computer Configuration section, select Administrative templates\u003e Windows components \u003e Autostart policies.

In the right pane, find and click "Turn off the autorun", after which the window will open where you need to switch the parameter "not specified" to "Inclusive". Next, select "All Devices" to disable autorun on all devices, or "drives for CDs and Device with removable carrier", respectively.

As you can see, turn off the autorun is quite easy, even a novice user. However, it should be noted that the most secure and convenient option is the meaning of "to ask every time" if you prefer to keep the autorun enabled. So that the actions with the connected media are not taken automatically.

The article is dedicated detailed review Functions startup windows 10. It will be mentioned on how to configure it, make, disable or delete the program, as well as other nuances that will optimize the system.

To begin with, we will understand what is the startup. It is embedded windows service 10, which launches certain programs when the computer is turned on. Application list is available for user editing. It is convenient because you can configure the system at your discretion.

Setup via Task Manager

Task Manager - Built-in service responsible for controlling processes and computer resources. You can run it through a combination of Ctrl, SHIFT and ESC buttons or click on the free space in the PCM Program Panel and select the appropriate item.

Most likely, the service will open in the reduced version. You can understand this by the presence of the "Read more" button below the window. If this is present, click on it, it is desirable to turn on the full screen display. Otherwise, skip this step.

Go to the "Startup" section. There will be displayed all the elements of the system that will be run when you authorize on the current user. The right-hand click of the object will open the context menu of the interaction. There you can activate and deactivate its launch, go to the folder where the executable file is located, as well as find information about the application on the network.

The "Impact on Start" column clearly shows how much the selected object loads the OS during start. But it should be understood that the state "high" does not always mean that this application will slow down the work of the PC.

"System Disk" \\ Users \\ "Account Name" \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Main menu \\ Programs \\ Autoload

But this catalog is hidden. Therefore is alternative wayhow to open it. Press PCM on the Start icon, run the "Run" program, enter the Shell: Startup request. Immediately the folder will open in Windows 10, the autoload is where.

Now we'll figure it out how to add a program to the Windows 10 autoload. It is enough to just create a shortcut of its executable file in this catalog. But this method does not work in some cases. Then you need to edit the registry. More information about this in the next section.

Editing registry

Again, you must run the program "Run". But this time, copy the REGEDIT command in the text field. SECRETSEWTOMAMUTU : HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run.

In the right block of the program there will be a list of components that run along with the start of the computer when the input is in the current user. And here opens the best wayHow to add a program to autoloading Windows 10. To do this, in the free right part of the screen, click PKM, "Create - String Parameter". As a name, enter the name of the program (this is not applicable, simply for ease of designation), and then set the location of the executable file in the value column.

In the same folder, but categories HKEY_LOCAL_MACHINE, there are all components for automatic boot for any PC user. There is a function for quick transition to this section. To do this, click on the PCM on the current folder and select the last item from the context menu. There you can edit the list of the exact same way.

Task Scheduler

A task scheduler is still involved in the autorun system. Open it easier through the search (launch on Win + Q). In the string, start writing the name of the service, the desired item will be displayed, run it.

Special attention should be paid to the utility library section. There are various components of the system, as well as the conditions for their launch, for example, the entrance to account. The library will not only be edited at its discretion, but also complement with new tasks.

Third-party programs to configure automatic program launch

On the Internet you can find a large number of Paid I. free utilitiesDesigned to configure in Windows 10 autoloads. Among them all allocated the Autoruns program. One of its main advantages is that it is developed by the Mucrosoft SysiNternals branch.

You can download Autoruns by reference http://download.sysinternals.com/files/autoruns.zip.

This utility is portable, it does not need to be installed. She is universal, works with all the editors of "dozens". Run software will appear full list Objects included in autorun.

The main features of Autoruns:

• Viral check of an object on Virustotal;
• Search for information about the object in the network;
• Excluding component from autorun;
• Go to the folder where the executable file is located (Jump to Image);
• Go to a folder where all files for autorun (Jump to Entry) are located.

By Microsoft may seem incomprehensible, but in reality it is a very powerful process management tool. automatic launch Windows components.

There is another program with similar possibilities. We are talking About CCleaner, one of the most popular utilities for comprehensive computer cleaning. With it, it will also be possible to configure the mode of launching applications when loading the system.

On the www.piriform.com/ccleaner/download page download free version Programs and install it (standard procedure).

Open the "SERVICE" tab, find the category of "autoload" in it. Actually, her name speaks for himself. Among the disadvantages of CCleaner, you can select that the application cannot be deposited into the download list. With other actions, it will perfectly cope.

After installing various kinds of programs, in most cases, they are added to Windows 10 autoload. In some of them, the user does not even give an agreement to add programs to autoload. And also found malicious programswhich are installed with usual and immediately fall into the operating system autoload.

This article will tell how to open autoload in Windows 10. Each user needs to know how to work with autoload programs in the system. In general, disabling programs in the autoload improves the performance of the operating system as a whole. We recommend simply removing unnecessary from the startup in Windows 10. If necessary, the user has the ability to be back.

Starting with the version of Windows 10 version 1803, autoload settings were added to the new parameters. Here you can turn off and include autoloading any application with only one click. Applications can be configured so that they start when entering the system. In most cases, they start in the rolled form or begin to perform only the background task. To open the startup, you just need only:

Unlike Windows 7 in new versions of the operating windows systems Decided to make the startup section in the task manager. Previously, the similar section of the startup was in the classic system configuration configuration. Now, after in the startup section, the user will see a link to go to the task manager.

Here we see all the programs that are added to the system autoload. And also immediately you can disable the autoload of all programs on Windows 10. We want to draw your attention to the column opposite the application impact on system startup - this is the degree of activity of activity central processor and disk measured during boot and updated with each reboot. We recommend to disable the applications with a high influence on the launch, and all unnecessary applicationsthat are in autoload.

Startup folder is present in the early windows versionsBy adding the application label to which it will be used. Open the startup folder by running the command. shell: startup.in the window WIN.+ R.. Well, or just go along the way: C: \\ Users \\ Username \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Main menu \\ Programs \\ Autoload.

In order to add a program to the Windows 10 autoload, you need to create a string parameter. You can set the parameter any name. Twice by clicking on this parameter, in the line ValueYou must specify the path to the executable program file. An example of adding a parameter to the registry can be seen in the image above.

There are many programs that allow both to add and delete programs from autoload. CCleaner - free program To clean the garbage on your computer, allows you to control the autoload of programs on Windows 10. You can download without problems on the official website of the program.

Conclusion

Each user is obliged to be able to work with autoloading programs in the Windows operating system 10. At a minimum you need to know how to open, enable, disable the program autoload. Since the removal of programs from the startup improves the performance of the system as a whole.

Indeed cleaning the startup in the operating system allows the user not bad to save one's own time. As well as to improve performance, we recommend additionally.

When Windows starts, there are applications that run automatically. The bigger software You install on your PC, the more time it may be necessary for windows downloads. Many utilities add themselves to autorun, and the list can be large.

You can change the autoload list by setting up any application, file or folder. For windows startup It will take more time if you have many applications in the autoload. Some of them starting at start-up slow down the work process.

How to manage autoload

You can change the athup programs in the task manager. Here.

• To start simultaneously press Ctrl + Shift + Esc.
• Right-click on the taskbar at the bottom of the desktop and open the Task Manager in the menu that opens.

To manage application load, view all of them, and disconnect those that you do not need.

In the "autoload" will be displayed full list Programs that run automatically when the system starts. Using the "Auto load" tab, you can easily prohibit the launch of applications from your OS. If you see any programs, and they are not needed, they are very easy to remove. Right-click on the appropriate application, then select the "Disable" parameter in the pop-up menu.

To enable the disabled application again, you just need to right-click it and select the Enable command from the drop-down context menu.

How to add or delete applications in autoload

The autorun elements of the current user are usually stored in two places: in the registry and in a special "Auto-loading" folder. This is a simpler management method. To add or delete, you must do the following:

Hold the combinations of the Win + R keys and enter the command in the "Run" field:

C: \\ Users \\ Username \\ APPDATA \\ Roaming \\ Microsoft \\ Windows \\ Start Menu \\ Programs \\ Startup

Just copy and paste the desired label It will start in it and the application will start when running the operating system. To delete the program, you must delete the shortcut of this application.

Exception and adding programs using the registry editor

In the "Run" field, type the command.

Open the following key:

HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ CurrentVersion \\ Run

There are autorun components for the current user. To exclude an item, right-click it and check "Delete" in the drop-down context menu. To add a new autoload element, create a string value with any desired name and set its content to the full path to the application you want to download when starting.

The performance of the computer running Windows 10 operating system is as well as "seven" or "eights" depends on many factors. Not the last role in the speed of our devices is played by the number and voyage of programs located in the autoload. Startup optimization in Windows 10 - This is what can at least speed up the operation of the operating system.

The fact is that, as a rule, immediately after launching Windows, on our computer starts and starts working at idle. third-party programs. Some of them are really necessary and important, and they should be kept in autorun. However, most programs unambiguously stand from there to remove. Well, judge yourself why you, for example, autorun Adobe Reader. Or any other program you are not a fact that you will use? And they start. And spend the valuable resources of the computer only to ensure that it is necessary to run a little faster if necessary.

When there are several such programs, it is unlikely to slow down your system. And if there are more than a dozen? This is especially the actual problem for computer owners with a pre-installed manufacturer of Windows 10 (or other OS). As a rule, together with the operating system at the factory, you will install many programs that most likely you will never need: trial versions antiviruses, graphic and text editors, audio and video players, etc. Most of them manage to attribute themselves in autoload. It turns out, while we do not use them at all, they devour the valuable resources of our computer (first of all, rAM). And from this, our computer is started, and it works more slowly.

So, let's understand how to disable autorun programs in Windows 10. If in Windows 7 for this through the "Start" menu it was necessary to find and run the msconfig utility, then the "Tens" tab of the Auto-site is located in the many "task dispatcher".

Where is the autorun in Windows 10

First you need to open the "Task Manager". The easiest way to do it clicking right key on the Start menu and selecting the item with the appropriate name (on this moment It is 7 below).

You can also open it like this: Press the combination of three keys "Ctrl + Alt + Del". Then in the window that opens, select the Task Manager item.

By default, in Windows 10, the task manager opens in a turning form, where you can observe only what programs are explicitly working. In order to look more information, you need to click "more".

After that, go to the "Auto-loading" tab and look at which programs we have, how many of them. And then we decide which ones we can painlessly turn off from the startup.

To disable the program from the startup, you need to click on it with the mouse, and then in the lower right corner click "Disable".

I will reveal the secret: Even if you disable all programs from autorun your operating system will start perfectly. And then you can already launch those programs that you need.

For example, in my autorun on the computer there are only two programs. it automatic switch Punto Switcher keyboard layouts from Yandex and cloud storage ONEDRIVE. Everything! More is nothing superfluous.

Solving which programs can be turned off in autoload, consider how often you use them. If every day, and not one time, it is better to leave them, and if you rarely - well, you know.

Why do you need autoloading programs in Windows

The fact is that there are programs there for that if necessary, they were able to start faster. They work B. background mode constantly. If for Skype or Torrent, you can justify you to justify what you need, so that they work always, what is there, for example, makes the Office software package I am more complicated.

For those who installed himself operating system From scratch, the problem of a large number of programs in the autoload is practically not worth it. Basically, it concerns those who have Windows 10 (or another version) was pre-installed by the manufacturer. At the factory, dozens are installed on the computer in addition to Windows different programswho may never need you. Many of them are prescribed by default in autoload. Removing them from there, you can notice the acceleration of your computer and thereby optimize the work of Windows 10 .

Adding programs to autoload

Immediately, just in case I will tell you how to add required programs In autoload. (It happens very convenient. For example, I somehow tried to add your main browser to the startup. Google Chrome. I started myself immediately after downloading Windows 10.)

The easiest way to add a program to autoload - through the settings of the corresponding program. But not always this method works. This case has a universal option working with any applications:

1. Open the "Run" dialog box with a key combination Win + R..
2. After that we write there: shell: startup. (or Shell: Common Startup - If you need to add a program at once for several windows users). Press OK.

The "Auto-loading" folder opens. Most likely, there will already be labels of programs loaded with the system. To add new program In autorun it is necessary:

1. Press the right key to an empty place in the folder.
2. Select "Create" - "Label" in the menu.
3. Press "Review" and through the conductor to find the program you need. Usually all programs are on the disk with the Program Files or Program Files (x86) folders.
4. Ready.

P.S.: Often the problem occurs when some program starts, but it is not in the startup. Read more about ways to find a solution to this issue, on my new website Wi10.ru.