First installation of cryptopro. How to install cryptopro - how to install a personal certificate in cryptopro from a flash drive? Cryptopro license key

Cryptopro is one of the cryptographic utilities (cryptoprovider). Which is needed to generate electronic digital signature () And working with key certificates. In this article, we will analyze in detail the process of installing a cryptopro program to a computer.

After you have purchased a license Cryptopro CSP. Or decided to try out free three-month access to the functions of the program, the question arises like on a computer?

How to install crypto-pro

The answer is as always in the user manual, which is available on the official website of the program, and also attached when buying a license. But since it was so it was that no one else reads, we will describe the installation process on items.

First step: PC check

At this stage you need to make sure whether it is not installed on your computer old version This program. You can do it, carefully viewed all the Start menu items on your computer, if you did not find a cryptopro point in it, most likely this software was not installed on your computer.

If you found a cryptopro in the list of programs, make sure that its version is outdated, for this:

Run the cryptopro PKI
Open the License Management tab - CSP Cryptopro
Check the version number in the right window

If the version of the program is 3.6. **** and above, the reinstallation of performing is not necessary and can be proceeded to the fourth step. If the version is indicated lower than 3.6. ****, delete the program using standard tools Windows and restart the computer. Next, go to the next step.

Second step: Distribution loading

Fill out the necessary fields, agree with the license agreement and go to the next page (at the time of writing the instruction it looked like this):

Third Step: Set CSP Cryptopro on Computer

Run the downloaded file and go to the steps of the installer until you see the following window:

Enter necessary information And the serial number you received by purchasing a license. If you want to get free trial access, leave this field blank and click Further.

After the installation is completed, restart the computer. Ready!

Fourth Step: Entering Licensed Key (optional)

If the program is already installed on your computer and you only need to enter the license key, go through the next way.

How to install cryptopro on a computer, installation of cryptopro 4.0

CRPTOPRO CSP is a cryptoprodder and ensures the legal significance of electronic documentation, the protection of the compounds. This is a key product, among cryptopro products. How Cryptopro CSP Install Most questions arise. We suggest familiarizing yourself with the information below for the correct installation of the program. To establish this software to the computer, the user must have administrator rights. On the disk you need to insert into the drive or select a folder with distribution on a computer. By running the installation wizard, you must select the language used. When installing, there is also the ability to select the level of protection (class).

Further installation is carried out in accordance with the choice of actions specified by the installation wizard. So it may be necessary to specify the serial key, setting up additional sensors, adjust the SPI to use the keys storage service. Installation can be complete and selective, depending on user tasks. Selective installation will help install additional necessary components. Preferably after installation, to restart the computer for the correct operation of the program.

To protect the transmitted data on the CROINFORM .RA information portal. cryptographic protection Information (SKZI) of Krypto-Pro company. To install this software, perform a few simple steps.

Step 1. Loading a CSP cryptopro distribution (version 4.0)

To download the distribution, go to the Krypto-pro site http://www.cryptopro.ru/

In the "Login" form, enter the following username: MBKI Password: MBKI and press input

The download Center page opens. In the list of programs, select CSP cryptopro (first in the list).

Choose CSP Cryptopro distribution (version 4.0)which is suitable for your operating system. Save the file to the disk.

Step 2. Installing CSP Cryptopro (version 4.0)

Run the scored in step 1 by distributing CSP cryptopro program. The "Installation Window" appears on the screen. Select the recommended installation option, "Install (recommended)".

A window appears with the CSP cryptopro installation process.

After the CSP cryptopro installation process is completed, a message will be displayed.

A temporary license is valid for 30 days. After this term full package SKZI functions cease to work, however, part of the information protection features necessary to work with the information portal remains.

During reinstallation, you will need to enter a license for crypto pro, so you should find the license form in advance

It is exactly the same version of Kripto about which a license is obtained.

Installation will require administrator rights in the system Microsoft Windows.. At the installation time, you must disable the antivirus program.

Automatic update cryptopro

If cryptopro is installed in the workplace 2.0, 3.0 or 3.6.5365 and above, it is possible to update the cryptopro using a web disk or diagnostics. At the same time removal previous version No need. In other cases, reinstalling cryptopro should be done manually.

When installing a system using a web disk or diagnostics, the default version is set. Cryptopro 3.6 R4 Developer companies.

To check the installed version Cryptopro should go to Start / Control Panel, open Cryptopro CSP.. On the tab General will be indicated full version Product.

Fig. 1. Cryptopro version

Manual cryptopro update

1. Remove cryptopro.

For cleaning all traces earlier installed program Cryptopro needs to use the utility cSpclean.. To do this, download the utility from the Software section, run the CSpclean.exe file.

When using the UspClean utility downloaded from the "Contour-Extern" site, the removal of containers from the registrynot happening. If the CSpClean was independently stored from the crypto-pro, then when you start the utility, a request may appear to remove containers from the registry that needs to be rejected.

2. To restart a computer.

3. Install cryptopro using a web disk.

When installing the system using a web disk by default sets Cryptopro 3.6 R4. Cryptopro versions 2.0 and 3.0 are no longer certified FSB, they are not installed from a web disk. If necessary, distributions of any versions of the cryptopro can be downloaded from the developer's website.

4. Enter serial number licenses specified on the letterhead, which is issued in service center Together with the subscription service agreement.

5. After installation, be sure to restart the computer. Reinstalling completed.

After reinstalling the CSP cryptopro program, you must reinstall all available certificates (see

Installation through the "View Certificates in a Container" menu

1. Select "Start"\u003e "Control Panel"\u003e "CSP Cryptopro", go to the "Service" tab and click on the "View Certificates in a Container" button.

2. In the window that opens, click on the "Overview" button to select a view container. After selecting the container, click on the "OK" button.

3. In the window that opens, click the Next button.

4. In the next window, click on the button.« Install ", after which it is approved to notify a certificate replacement (if it appears). The certificate is set.

5. If the "Install" button is missing, then in the "Certificate for viewing" window, click the "Properties" button.

6. In the window that opens, select "Set the Certificate".

7. In the "Certificate Import Master" window, select Next . In the next window, leave the switch on the "Authority Authority Authorized Authorizable" item and click Next. The certificate will be installed in the "Personal" storage.

8. In the next window, select "Next", then click on the "Finish" button and wait for the message about successful installation.

Installing through the "Install Personal Certificate" menu

To install, you will need a certificate file (file with extension.cer). The certificate file can be exported from the "Personal" storage. If there is no necessary certificate in the repository, contact technical support by the address [Email Protected] By specifying the INN and the CAT organization and the essence of the problem.

1. Select "Start"\u003e Control Panel\u003e CSP Cryptopro. In the CSP Cryptopro Properties window, go to the "Service" tab and click on the "Install Personal Certificate" button.

2. In the "Certificate Import Wizard" window, click the Next button. In the next window, click on the "Overview" button and select the certificate file.

4. In the next window, click on the "Next" button.

5. Click the Overview button .

6. Specify the container closed keycorresponding to the certificate and click "OK".

7. After selecting the container, click on the "Next" button .

8. In the "Select Certificate Storage" window, click on the "Overview" button.

If the CSP 3.6 R2 cryptopro version is installed (product version 3.6.6497) or higher, then check the "Set the certificate to the container".

9. Select the "Personal" storage and click OK.

10. After selecting the storage, click on the "Next" button, then ready. After clicking on the "Finish" button, a question may appear on replacing the existing certificate new. In the query window, select "Yes."

Wait for a successful installation. The certificate is set.