The television splitter on 2 TV does not work. Application of the RF modulator. Instructions for connecting

In almost every average family, there is a second TV: in the kitchen, in the bedroom, and sometimes in the hallway. Therefore, for many, the question of how to connect two TVs to one antenna is rather sharp. There are not so few ways, but we will focus on the simplest and at the same time effective options.

So, we will deal with how to connect two TVs to one antenna, which tools will be needed for this, as well as denote the main stages of this process.

What do you need

In the process of connecting, we will need several parts. Passatias, side chases and a conventional kitchen knife will be as tools.

First of all, we will need a TV splitter, or a splitter. This device is capable of separating the signal from the antenna to several threads (in our case - two). That is, on the one hand there is an input, and on the other - several outputs for connecting to the receiver.

Next, we will need five connectors that match the diameter with outputs on the splitter, as well as two adapter plug. Antenna cable Choose at your discretion, but it is better to stop even on more expensive, but verified variants - RG-6 or domestic RK-75.

It is also worth considering that when buying a splitter, be sure to specify the number of outputs. For example, three-track models are designed to connect exactly three TVs, but not two. If for some reason, a splitter for three receiver will be at hand, then the unnecessary output can be dried in a special ballistic resistor with a resistance of 75 ohms. Be sure to pay special attention to this moment before connecting two TVs to one antenna.

Order of work

In principle, the connection process itself is easy, and with it is able to cope any user, even the one that the layer did not hear about radio engineering. For clarity, we break the whole process into separate stages.

Choose TV splitter

First you need to buy a splitter. On store shelves, you can find a large range of models from different manufacturers. There is a simple rule - the more expensive, the better. But there is another one here important momentwhich should be paid before connecting two TVs to one antenna. We are talking about soldering. If you have skills to work with a soldering iron, then preference is better to give models with soldering. Such splitters, and this connection In particular, always more reliable, they suggest a noticeably smaller signal loss together with quality preservation.

In the event that a soldering iron for you is something incomprehensible, you can take a regular splitter, but again, taking into account the existing cable type - or vice versa. The most optimal option can be called splitter with standard connectors for coaxial wires (cable for an antenna of type RG-6 / RK-75). After you decide with the splitter, you need to choose the corresponding connectors. The greatest popularity was obtained convenient, reliable and easy-to-install F-interface (adapter-cheating).

Also special attention should be paid to the location of the splitter. Optimal option It is considered approximately equal distance from the splitter to both TVs. It is important that the antenna cable is without stretching and not twisted, that is, it is not necessary to try to stretch it out due to the lack of a pattern, or, on the contrary, twist it. Distribute the distance from the splitter to the TV and cut the extra.

Cable preparation

The cable must be cut so that it will be freely reaching the splitter. As a rule, the old plug is cut off with a piece of wire. Then you need to part the cable to install in the F-connector.

First, we clean the edge, that is, we cut the wrapper before the braid (about 15 mm from the edge) and the edges bend. The insulating "fur coat" on the cable must perform a little bit, and the living end itself is not less than 4-7 mm. The entire procedure for preparing the cable for the adapter-plug can be performed with the help of kitchen knife and windows.

Features of the procedure

It is also important to know that the cable braid should not touch the central core. This error is fraught with partial or full signal loss. Similar problems Most often arise with SAT 703B and DG-113 brand cables, where every layer is very thin.

Next, mount on the F-connector cable. The name "cheat" he received due to a specific installation, where the plug simply winds onto the wire. A similar procedure must be done on all cables - and in the end it will turn out five connectors: one from the antenna, two for the output and two for the entrance.

Connection

In the desired order, connect cables with splitter. It is not necessary to delay the F connector strongly, because it can lead to the loss of the main core from the adapter. Most users leave a splitter as it is, that is, chatting somewhere on the plinth or under the bedside table. Experts recommend how to fix the splitter to avoid breaks and loss of the veins. If there are children in the house, then this item is obligatory to fulfill, plus it will be worthwhile to hide the splitter for some kind of ramp.

If everything is done correctly, the image on both TVs should be clear and without interference. Otherwise, specific "snow" may appear due to the loss of part of the signal or the lack of pictures.

Satellite TV

It often happens that even after the literate splitter installation, the image quality has worsened noticeably. It happens if you connect two TVs to one satellite antenna. The problem arises due to the fact that the splitter is in any case takes part of the signal.

One of the options for solving the task is to buy a splitter with a built-in signal amplifier. Such devices are noticeably more expensive, but at the same time they are much more effective than their simple fellow.

It is also worth clarifying that all splitters with the built-in amplifier have different gain factors. In some cases, an explicitly enlarged signal is also useless, as well as weak. Moreover, it can cause even big distortion pictures. With this nuance, those who want to connect two TVs to one tricolor antenna or "Rainbow TV" are often faced with this nuance. Here you need to seek help at your service specialist of your provider, which can measure the signal level and give advice on choosing a splitter with specific numbers.

Antenna with amplifier

If a we are talking About the usual "Polish" antenna, then to improve the signal, you can connect an amplifier with a power unit, which will noticeably add the quality of the image.

To do this, you need to make some changes in the already familiar scheme. It is necessary to remove the F-connector from entering the splitter, then on the vacant place to install a plug with a power supply that comes with the "Polish" antenna. After that, an adapter with an antenna socket ("Mom") should be installed on the entrance and connect the connector with the amplifier.

Such a procedure will increase the gain coefficient, where, in contrast to satellite TV, the maximum value is not so important, so there should be no problems with the rebuppiness of the signal.

It will also be less noted that each subsequent TV largely reduces the quality of the reception. Therefore, for a comfortable viewing of your favorite TV shows, it is better not to sue and acquire an additional antenna instead of "conclusing" with a splitter. This advice is especially relevant if the televisa is at a great distance from the receiver.

Satellite antenna for 2 TVs: how to connect correctly

Thanks modern technologies 2 TVs can show from one satellite antenna.Technologies in our time make it possible to man a lot of opportunities. Not so long ago, the presence of a television in our house, which showed several channels was considered an achievement. Nowadays, the TV is able to show hundreds of channels, but this is not enough. Many users show a desire to install two TVs that accept satellite signals And it turns out a high-quality image.

Satellite TV on 2 TVs: what option is unacceptable

Buying and holding a set at home satellite television, Few people know that this kit is intended for one TV. And since the tastes of the inhabitants do not coincide during the gear views, films, then many have two, or even three TVs. And in this case, the owners of several TVs face the problem of connecting this technique to one antenna and separating the signal between them.

Before buying satellite antennaIt is worth consulted with the seller about connecting to two TVs

There are two options with which you can watch TV simultaneously with the other:

Connection using 2 receiver;
And with the help of the RF module.

There is a very simple way to connect one satellite antenna to two TVs, but this method is few people like. This method is to use one receiver. In this method, the first device is connected to the first TV through tulips, and a three-mode device, that is, the RF module is connected to the second output to the tuner, which allows you to connect other monitors.

But, unfortunately, such a connection has great amount shortcomings. Channel management can only be in the room where the tuner is located. And at the same time 2 TVs show the same channels. The image quality is also reduced.

Satellite Antenna Connection Scheme to 2 TVs

There is an option for connecting 2 TVs using a splitter or a spiner, which separates the antenna signal to 2 TVs. For such work, modern equipment is used and for this reason the soldering iron, tin and rosin we will not need.

In these samples of branching applies screw sockets. The stripped end is inserted into the nut, and the second with a similar plug connects to the TV. Central antenna cable We insert into a special hole of the screw jack of the spinner, and the nut wrap and tightly press the copper cable shell to the device body.

Before carrying out the work, we turn off the device from the network to the final connection.

Satellite antenna connection diagram to two TVs may differ slightly depending on the selected model.

Instructions for connecting, step by step:

Buy special cablehow much is necessary, long at least 12 meters, from right choice the cable depends on the image quality, and a spiner with two outputs;
If the satellite antenna is already connected to one of the TVs, then this end is inserted into the output port on the separator and clamp the nut;
Next, cut off a non-large piece of the cable from the meak and put on it the ends of the standard plug (the so-called head) and crimp them;
We carry out the same crimping on the remaining segment of the cable, it will give the ability to connect the signal separator and the TV in another room;
We carry the plug into the corresponding connectors on the casing of the splinter and connect to the TV;
A segment that goes to another room, hide under plinth, so as not to come on it;
In order to reduce the length of this cable, you can drill a hole in the wall between the rooms.

After connecting the antenna to 2M TVs, check the image quality and in case it is distorted or with interruptions, then check the connection or convert the crimp.

How to connect 2 TVs to one tune

For a successful connection of 2 TVs to one satellite, you must have the desired tool.

Namely:

The easiest tool for stripping the cable;
Satellite plate or standard antenna;
Tuner;
Splitter or spinner for 2 outputs;
2 TVs;
Set of fit cables.

If one TV is located, for example, in the living room, and the second in another room, then connectivity, we perform a relaxed TV with a receiver and a purchased cable. Turn on the TV in the hall and start setting up.

There are special connectors for connecting two TVs on the tune.

We carry out such actions:

Press the menu button;
We define and mark the desired source for the signal;
In the found source, we note that the connector to which the TV is connected;
We perform the search for programs;
After the search is completed, we remove channels from the list with a poor quality image.

Now let's tell you how to connect a 2nd TV to tyuer. We perform measurement of the minimum distance from the TV to the TV. We carry out the cable along the plinth, in order to not affect it when walking around the rooms.

Next, we take a high-frequency or ordinary cable television typewhich connects to the output on the rear panel of the tuner, the other end to the antenna input, which is on the TV. After connecting, you can only configure the TV.

Optimal connection of two TVs to one satellite antenna

In order to properly connect 2 TVs to one satellite and give the ability to view different channels on these TVs, you must connect to each of them on your own tune. After entering the signal to the tuner, the signal can be divided as you comfortably and view your favorite channels, without interfering with another inhabitant at home.

To connect two TVs to one satellite antenna, you can use special adapters

All channels switched exactly on the tunele - it makes it possible to watch different channels on two TVs at the same time.

Do this connection is not a cheap pleasure, but there is no such way.

Each room is set separately such a device. Connection is performed on a chain. When connected via a chain, all devices are connected to the passage.

How to install a satellite antenna for 2 TVs (video)

After you have got acquainted with our article, you realized that there are many options for connecting. Each of them has not only its features, but also certain difficulties. Based on this, it can be said that someone will be easier to take his free time and cope with the task itself, and someone will solve spend cash And contact the masters. In any case, the same option has the right to exist.

Surprise someone with several TVs in one residential room today is difficult, but many users have a question how can you connect the second TV to Rostelek without a second console. Speech, it is over, it is about a new proposal of the largest provider of communication services - interactive television (IPTV). Most modern TVs have the ability to view media files over the Internet, and with the appearance of a new service from Rostelecom the ability of users were significantly expanded.

Interactive television is a real breakthrough in the development of telecommunications. The service offered by Rostelecom suggests viewing more channels, and in the very best quality. In addition to watching movies, there is a unique feature rental opportunity, users can also use the huge karaoke collection and burn your favorite program. You can do it, both on your own carrier and on the prefix, if you choose in favor of a more expensive device with a built-in hard disk. By the way, it was the purchase of the receiver - the main terms of the provision of the service. You can connect it, both independently, following instructions and using the company's technique - service provider.

Connecting a receiver

If you decide to use the service of interactive television from RTK, it is enough to visit the company's office, to buy one of two options for devices and make a subscription fee. After a short time, the service will be activated, and you will only have to connect the device. This is not difficult to do, but some difficulties may arise.

Remember: In order to use the TV tuner, you must have high-quality internet access connecting cables and a remote control remote control TV-receptionist and consoles. Cable, all sorts of adapters and remote control are included, so it is extremely desirable to check the package when purchased.

To plug interactive television With the help of one console, Rostelecom can be three ways: using the Internet cable, via Wi-Fi and by PLC adapters. It will be easier and cheaper to connect through the cable, so we suggest considering this option in more detail:

Important: Most of the modern "plasma" and LCD TVs have an input for the HDMI cable, so if it is not included, you will have to buy it additionally. So you significantly improve the quality. This is especially true if you decide to connect a TV tuner from Rostelecom to two TV receivers at the same time, and this is possible.

Customize the prefix

After turning on the receiver in the socket, it remains to perform the necessary settings, for which the remote control of the TV receptionist is translated into the video mode, where all the necessary settings are made. First of all, the system will ask you to enter a username and password from the account - you can find this data on registration documents. If you think that you have to be further configured, then mistaken - the system will fulfill everything for you, and the user will only remain to choose one of the channels offered.

Methods for connecting the second TV

Considering the presence of several TV shows, I would like to discuss the possibility of connecting the second TV to the Rostelecom console. The perfect option, of course, is the second prefix, but such waste will withstand the budget not every family. Therefore, users have to solve the question: how to connect the second TV and use only one prefix from Rostelecom.

This is important: if there is one interactive TV receiver TV to technically connect the second TV signal receiver, it is possible, but this is if all family members agree to simultaneously watch only one channel. There is no other possibility of connecting and connecting the second TV, except for the purchase of another receiver.

Connect two TVs to one console

In the event that you are ready to come to terms with the opinion of the relatively uniformity of the telemine, you can start connecting two TVs to one console Rostelecom, and how to connect, you will now learn. First of all, it is necessary to study the receiver itself, and, most likely, the jack for connecting the HDMI cable is already occupied. In this case, it is necessary to take advantage of the neighboring jack for RCA cable. Most likely, to view television television channels from Rostelecom through 2 devices, you will need to buy this cable. It is necessary in order to connect the second TV shows with the prefix.

How to connect the second console

Watch one channel, most likely representatives different generations I will not agree, so you have to visit the RTK office and ask if two TVs can be connected. You will be offered to buy a second TV tuner and arrange the appropriate contract with the provider. Fortunately, you will not have to buy another router if your device has free LAN ports, of course. You will need a cord for connecting the Internet, check the presence of cables. Further actions are similar to those that you would have done for one receiver. If you decide to connect the second console from Rostelecom to the second TV, remember only that each TV tuner is configured to your television.

Very often in one family, the second TV appears. At the same time, the antenna is only one. The question arises: how to connect two TVs to one antenna? There are methods that allow one antenna to use two TVs and more.

What you need

To connect, you will need several parts:

two-way splitter (splitter). This device allows you to divide the signal from the antenna to two or more flow. It has an entrance on one side and two or more outputs on the other - to connect the television vehicles.

5 connectors corresponding to splitter;
2 adapter plug;

antenna cable.

Important: By purchasing a splitter, do not confuse the number of outputs! Three-band (three-way) splitter applies to connecting three receivers, but not two! If, at hand, it turns out to be threefold, then solve the problem can be connected to the free output of the ballast resistor (resistance of 75 ohms). And if there is a plan in the future, install and connect several TVs to this antenna, it is better to immediately buy a splitter with multiple outputs and temporarily drown out empty outputs with the same resistance.

Stroke work

We will try to tell about the connection so as to cope with the task even one who is not at all understanding the radio engineering. Step by step this is done like this:

Choose details. First of all, you need to buy splitter. They are different, including those that need soldering, and those that it is not required. If you know how to solder, it is better to take those that suggest a soldering. This connection is always more reliable than any other, it gives smaller signal loss, retains its quality.

If you do not have the skills of soldering, then the splitter you need to choose the corresponding, as well as suitable for a specific type of cable. The win-win version will be splitter with built-in sockets for coaxial cables.

Selecting the splitter, select the appropriate connectors. F-connectors are now very popular with the fact that they are reliable, easy to install.

Choose a place for splitter. The device is optimally so located so that the antenna cable is free to reach it and, if possible, it was the shortest distance to both TVs.
Cut the existing antenna cable. It is necessary to cut so that the cable is free to get to the splitter. Together with a piece of cable, the old plug is cut off.
Cable cutting and installationF.-Notion.

For those who know how to solder, it makes no sense to tell how to share the cable and solder it to the splitter, - they know it themselves. Further is written for the average user who is not familiar with the radio.

So, the cropped end of the wire is separated, as shown in Figure: we clean the edge, wrap the braid. The medium-sized insulator should perform a little, and the middle lived itself began to perform at least 5 mm. Tool for dismantling isolation with coaxial cable At home serves an ordinary kitchen knife.

Important:The cable must be standard, more often used the DG 113 or SAT 703B brands. The cable braid in no way should be connected to the central residential, otherwise the signal will not pass at all.

Install the F connector. It is also called cheat, because the connector is screwed into a soft wire. The connector for connecting the cable and splitter is ready.

Cut two pieces of wires With the calculation so that the lengths are enough to each TV.
MountF.-Workssimilarly, for connecting television cables and splitter exits. At other ends of cables do the same.

As a result, we are involved all five connectors, including:

one from the antenna for entering the splitter;
two television, for exits from it;
two television free.

Connect connectors with a splitter.

Connect two free connector with adapters. The adapter is a device, at one end of which the F-connector is attached, and on the other - a coaxial plug for connecting to the television receivers. Usually this device is called the whole plug.
Turn on the TV shows.Check how both receiver work. If everything is done correctly, the image must be normal. Now you can easily enjoy a great picture at once on two receivers, without interfering with each other.

According to the following scheme, you can see the path for which 2 TVs to one antenna must be connected:

How to install an antenna with an amplifier

But what if after connecting the splitter the image quality deteriorated? This may mean that the antenna on two TVs does not provide the desired signal, while also the separating device takes on some of its stake. The output can be an antenna with an amplifier, it is also called Polish. Such an antenna for two TV shows connected to the device will improve the signal quality in both TVs. To do this, it is necessary:

In the already existing scheme with a splitter removeF.-Lone from entering it.
In his place put a plug with power supply From the antenna kit with an amplifier.
On the input install an adapter with an antenna socket (the so-called "mother") and insert the plug from the antenna with the amplifier.

This should improve the quality of the signal.

Splitter with amplifier

There is a second option - search for a splitter with a built-in signal amplifier. This method is good when initially the TV showed well and no new antenna is required. However, before purchasing a new device, discuss your specific case with a specialist.

Amplifiers, including on an antenna, have different gain factors, and too large signal is as bad as weak, and can also cause distortion. Telemaster fluctuates the signal level and give advice to acquire an amplifier.

By the way, the problem with the attenuation of the signal may all of the more occurring if you make a connection of several TVs to one antenna. The more receiver, the stronger the signal fades. Therefore, planning to connect a few television receivers, weigh all the arguments "for" and "against".

The following is a video instruction for connecting antenna to two television receivers:

In contact with