Programs for getting root rights Samsung. Getting Root rights to Samsung Galaxy S4 I9500. Ways to open root access on Samsung

I am glad to present you a new method of obtaining root rights on a new flagship smartphone Samsung Galaxy S4 I9500. This method does not contain anything complicated and makes it possible to get root rights in just a few minutes, performing simple operations on a computer and smartphone. The instruction is set out in great detail so that you do not accidentally have any questions about rutting the Samsung Galaxy C4.

So, pipe rutting will look almost the same as firmware, only it takes much less time. So let's get started:

First you need to make sure that you have installed drivers for your smartphone, i.e. You should connect the pipe to the cable and see that the unknown device does not appear in the task manager. If it still exists, then set SAMSUNG USB Driver for Mobile phones by downloading it by or by.
Then download and unpack the program from the archive. Be sure to disable your antivirus (if you have one), this can prevent the firmware from crashing or the process freezing. Beforehand, you can check all the files with the antivirus yourself, if you see some kind of catch.
Next, download and unpack from rar file, it is also at the bottom of the article.
Next, run the previously downloaded Odin as administrator.
Now you need to restart your phone in recovery mode. To do this, turn it off and hold down the button Down+ Button Home and press the power button. A warning recovery screen will appear in front of you. Press the volume button to continue Up... The phone is ready for rooting.
Now back to the program Odin and archive CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.rar which you downloaded and unpacked earlier. In it you will find a file. Now in the program Odin click on the button PDA and select the file CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5... On the menu Option set the checkboxes opposite the items Auto reboot if it's not there. Pay attention to the fact that the jackdaw opposite F.Reset Time MUST NOT BE SET . Don't touch the Re-Partiton option! .
Make sure everything is the same as in the screenshot.
We connect the Galaxy S4 I9500 to the computer, after which a yellow field will appear in the program window Odin... Click on the button "Start" and Odin will automatically flash the smartphone, wait for the inscription to appear "Pass"... That's all! Your Samsung Galaxy S4 I9500 will reboot and already have CWM + installed root rights.
You don't need to do anything else, the pipe is already rutted. If you have any questions about the instructions - unsubscribe in the comments.

Having superuser rights, or root, gives you the ability to use certain applications and special system settings which are not available for ordinary smartphones. I would not overestimate the value of this tool, since for most users it is completely unnecessary and will not open any supernatural possibilities for your device. But, if you nevertheless definitely decided that you need it, then in this article you will learn how to get root quickly and safely.

Kingo Android ROOT Is new universal utility for Windows, which allows you to get superuser rights on many popular devices under Android... You can find a list of officially supported devices on this page, but in fact, the utility can be useful on many other models with suitable hardware.

First, you need to download the program from the link that you will see at the end of the article and install it on your computer. After that, launch it and follow the step-by-step wizard that will guide you through the entire procedure.

As you can see in the screenshot, the first step is to connect the device to the computer via USB and activate the USB debugging option in the smartphone settings. After that, the program will recognize your device and automatically start installation required drivers for him.

After installing the drivers, you just have to click on the big button ROOT and wait a little for the end of the operation. The program's progress will be displayed in the program window, in addition, a request for granting superuser rights may appear on the device, to which you need to answer in the affirmative.

At the end of the work, the program will show you a corresponding notification and ask you to restart the device to complete. Besides receiving root program knows how to perform the reverse operation, which can be useful before going to service center if you are afraid of losing your warranty. The procedure is exactly the same, only after connecting the device the button will be available. Remove Root.

And in conclusion, although the developers declare on their website about complete safety getting root using their utility, you should still warn that this is potentially dangerous procedure and the editorial board does not bear any responsibility for any possible negative consequences.

And install recovery on Samsung Galaxy S8 \ S8 +(the instructions are completely identical for both devices - for the actions performed, but not for the files). And as we said in, then when customizing the firmware, in our case getting superuser rights- KNOX will work -> 0x1. And if root can be closed different ways, then it is not possible to return the counter to the source. Our business is to warn, further, everyone decides for himself or to stay on stock or get more opportunities for the android gadget.

All user data that was on your device after installing TWRP and obtaining root rights will be erased. Save what you want / important in advance. This method requires an unlocked bootloader.
To unlock, you need to go along the path: Settings -> About device -> Software information -> 7 times click on "Build number", after which the system will notify you with a pop-up notification that "Developer options are activated".
In the Developer options, we activate the settings -> Unlock, foreseen. production OEM and USB Debugging.

Samsung Galaxy S8 (Android 7 Nougat)

09.11.2017 updated software(AQJ5; see screenshot) but there are no changes in the instructions!

How to download from the "mirror" -
Who already has a new base (see "Software Information")

Download and run ODIN as administrator -> CSC_OXM_G950FOXM)

We go into the phone in the firmware mode (reboot -> bixby] + [volume down] - [food] -> the screen \ logo will appear -> press once [ volume up])

ODIN port will be displayed ID: COM.

Click in ODIN -> START ->

ODIN Green field: PASS! ->

bixby] + [volume up] + [food])

In recovery, use the "volume buttons" to select -> Wipe data\factory reset-> press the button [ Power \ Power] -> select “ Yes»-> again the [ Power \ Power]

Then, point: “ Wipe cache partition»-> press the button [ Power \ Power] - select “ Yes»-> button [ Power \ Power]

Further, the paragraph: " Reboot system now"And immediately hold down 3 buttons at the same time: [ bixby] + [volume down] - [food] -> a screen will appear - press [ volume up] = entered the firmware mode.

IN ODIN insert into the field AP(you can uncheck the box: Options - Auto reboot to then immediately go in and set up custom TWRP recovery

you don't need to shoot, the smartphone will reboot itself -> wait and go initial settings(then log in and configure TWRP) ... no difference - your choice

We connect the device to the computer -> in ODIN ->START

if everything went well, you will see a green field: PASS!

We go into custom recovery TWRP(restart the phone and press the buttons at the same time: [ bixby] + [volume up] + [food])

customize or get it right away ROOT

We throw the archive into the phone -> reboot / shutdown (as you prefer) -> go to the custom recovery TWRP (three buttons; which see a little higher) -> select the item " INSTALL"(File will be flashed) ->"

With the main actions - everything, the curtain.

It is recommended to manually delete the folder SecurityLogAgent(along with * apk) along the way system/ap p / - so that there are no security warnings and in buid.prop along the way system replace:

Ro.config.knox = v30
ro.config.tima = 1

Ro.config.knox = 0
ro.config.tima = 0

We save and overload the phone!

Getting root rights and installing TWRP recovery starting from the databases

Samsung Galaxy S8 Plus

Files can be downloaded in advance or in progress (highlighted in color).
Who already has a new base (see "Software Information"), then we start from the 5th (fifth) point.

Download and run ODIN with administrator rights -> paste the unpacked firmware files into the appropriate fields (in the CSC field you need to insert CSC_OXM_G955FOXM)

We go into the phone in the firmware mode (reboot -> immediately hold down 3 buttons at the same time: [ bixby] + [volume down] - [food] -> the screen \ logo will appear -> press once [ volume up])

we connect to the PC, if everything is fine with the drivers on it, then in ODIN port will be displayed ID: COM.

Click in ODIN -> START-> wait, do not touch anything until the phone reboots itself (reboots)

if everything is fine, you will see in ODIN Green field: PASS!-> you can close / minimize the program.

We go into the stock recovery (reboot the phone and simultaneously press the buttons: [ bixby] + [volume up] + [food])

In recovery, use the "volume buttons" to select -> Wipe data\factory reset-> press the button [ Power \ Power] -> select “ Yes»-> again the [ Power \ Power]

How to get a root rights on Samsung Galaxy

Each user can customize the function of the device very individually, and create their own unique configurations.

To have access to system parameters, you need to get root rights. A user who has such rights gains full control over the system and can manipulate system folders and adjust system files.

But it is important to remember that by receiving such rights, you void your gadget's warranty from the manufacturer. You can always seek qualified help from specialists at the service center for the repair of Samsung smartphones.

How to Root Samsung Galaxy, Samsung Galaxy S, J, Tab, Note, Duos Smartphones

Before accessing the system settings, it is important to understand that when manipulating them, there is a risk of damaging the device, and such configurations can only be used by experienced users. If an antivirus is installed on your device, then it will signal the danger of an application that grants root privileges, since they perform actions directly related to the system kernel, and this, in fact, is a hack.

Custom recovery is the easiest and most reliable way to root your Samsung Galaxy smartphones.

For everything to be successful, your phone must have at least 50% charge, and USB cable must be serviceable.

Your PC must have drivers installed for it to interact correctly with your smartphone Samsung... And the Odin program, which specializes in flashing Samsung gadgets.

Disable in settings " remote control"In developer options on your phone, enable USB debugging and OEM unlocking.

After that, you need to restart the phone and enter the recovery menu. Most Samsung phones, when you turn on the gadget, you need to hold down the power, lock and volume down keys.

When displaying a warning with the heading Warning - press the volume up.

Connect your phone to your PC and run Odin program... Only Auto Reboot and Reset Time should be checked. Select the file with the Auto-Root name element in the PDA tab and click Start.

The gadget can be turned off after the green PASS indicator appears.

When all these actions are completed, an application should appear in the phone menu, which is responsible for accessing system settings.

If the installation process fails and the phone does not turn on, try reflashing it using the Odin program.

We remind you that phone malfunctions caused by rash manipulations with system settings are not subject to warranty service.

Having superuser rights, or root, gives you the ability to use some applications and special system settings that are not available for regular smartphones. I would not overestimate the value of this tool, since for most users it is completely unnecessary and will not open any supernatural possibilities for your device. But, if you nevertheless definitely decided that you need it, then in this article you will learn how to get root quickly and safely.

Kingo Android ROOT Is a new universal utility for Windows that allows you to get superuser rights on many popular Android devices. You can find a list of officially supported devices on this page, but in fact, the utility can be useful on many other models with suitable hardware.

At the end of the work, the program will show you a corresponding notification and ask you to restart the device to complete. In addition to getting root, the program can also perform the reverse operation, which can be useful before going to the service center if you are afraid of losing your warranty. The procedure is exactly the same, only after connecting the device, the button will be available. Remove Root.

And in conclusion, although the developers declare on their website that it is completely safe to obtain root with the help of their utility, you should still warn that this is a potentially dangerous procedure and the editorial board does not bear any responsibility for any possible negative consequences.