How to program a universal remote. Program the remote from the gate for a couple of clicks

Programming consoles for the gate.CAME, FAAC, NICE, DORHAN, PROFESIONAL, GANT.

First of all, it is necessary to register the remote in the receiver on the control board. All manufacturers of automation for gates different algorithm Programming consoles, so there is no single recipe. Let's focus on the main manufacturers of automation for the gate presented in the Ukrainian market - Professional (Gant), Came, Faac, Doorhan, Nice.

First of all, a small leakage.

In CAME, FAAC, NICE systems, one remote control is written to the drive receiver, and then the required number of other key chains is copied from it. If you try to write the following remote to the receiver - the first remote and all the remotes recorded from it will stop working. In cases where you lost the old remote, it is not necessary to delete it from the memory - it myself will erase when you write a new one in the receiver. A huge advantage of such systems is convenience - there is no need to open the cover of the electric drive every time if it was necessary to write the next remote. But this system is very vulnerable - it is enough for me to hold your remote in the hands of seconds 10, to overeat the signal to your remote. And this opens the gate to almost everyone who kept your remote control (or the console of your employees). Suppose you decided to restrict access to the parking lot, put the barrier and issued a tenant 20 CAME consoles (equal to the number of parking spaces). But after a couple of weeks there is not enough space in the parking lot. Why? Because employees give each other consoles for copying and they appeared several times more than it was issued. And how to do it can be read below.

What is the way out? Install Professional (Gant, China) or Doorhan (Dorhan, Russia) system. The main difference of such systems is that the signal of each remote control is written to the receiver individually. The minus is the limit on the number of recordable consoles in the receiver (depending on the model from 25 to 128 pcs) and the need to open the drive cover or receiver every time to record the next remote control. But such a system will not allow a sidewayl to multiply clones. Recommended for enterprises and parking large quantity users. You can't be infinitely trusting everyone without exception to users to users? The plus is the fact that the consoles of these manufacturers are also cheaper than Italian two or three times.

How to program a remote Professional

How to program cAME console

How to program the FAAC remote

How to program the Doorhan remote

How to program the Nice Remote

How to program a remote Professional 100 UAH

Press the "Learn" button on the drive control unit for the gate for the 1st second, the LEARN LED will light up. Click on the button on the keychain, the LEARN LED on the control unit flashes and goes out. Your keychain is saved.

If you need to record additional consoles, repeat this operation. It should be noted that a limited number of remote controls is recorded in the receiver's memory (depending on the amount of microcircuit's memory, the number of recovered recorded can be from 25 to 128 pcs).

To remove all keychains, you must keep the "Learn" button for 8 seconds. All keychains will be worn out of memory.

How to program the CAME remote 25 euros

You must press and hold the PROG button (CH1) on the control unit. The LED indicator begins to flash (left drawing). Press the desired button on the keychain. The LED lights up with a smooth light, which indicates a successful programming of the control unit (right figure). Release both buttons. The console is recorded.

Press and hold both buttons on the remote control, which must be programmed (new remote) (1). The LED indicator will flash quickly (2). Release the buttons and click on one that you want to program (3). The indicator should light up with even light. Not more than 10 seconds to bring the master - keychain (programmed remote) from the bottom and rear to the programmable (on which the indicator is on) and once press the operating button (4). The LED indicator breaks three times (5) and will go out (6). To program other key chains, repeat operation. Thus, the automatic system can be configured to work with any number of key chain transmitters with the same code.

How to program the Panel FAAC 25 euros

To write a remote control FAAC to the drive receiver, you must simultaneously press two P1 and P2 buttons on the control panel and release them when the indicator on the remote control flashes (after 1-2 seconds). Then press and hold the button on the receiver board - the indicator on the board must be filled.

While the remote indicator flashes, you must click on the button control unit, the button that must be programmed to manage the door sash before letting the receiver button, make sure that the diode burned for about 2 seconds (in confirmation that the code is saved). Now let's release the button of the console and receiver. The console is recorded.

But if you wish to record more than one console, do not try to repeat this operation, since the next remote control (new) is recorded in the receiver, and the previous one will delete. It is necessary to carry out an operation to copy the console. How to do it below.

On the main remote control (recorded in the receiver), press and hold two P1 and P2 buttons simultaneously release them when the indicator on the remote control flashes (after 1-2 seconds).

Then place the copied (new) remote control in front of the programmed as shown in the picture above. On the main remote control (while the indicator flashes) Press and hold the button from which you want to rewrite the signal. Now click on the new remote control that the button you want to program. The indicator must flash twice as a sign that the code is saved. We release the button and repeat the operation for other proteins. Thus, the automatic system can be configured to work with any number of key chain transmitters with the same code.

How to program the Doorhan remote

Before programming, it is recommended to clear the receiver's memory from the pale codes recorded earlier. To do this, after turning on the power, hold the recording button pressed 10 seconds. The LED will flash for 10 seconds, then it will go out for 2 seconds and will blink twice again to confirm that the remote codes are erased.

To write a remote control to the receiver, press and hold the remote control button on the radio receiver on 3 seconds - the LED1 indicator on the receiver will light up. After that, press the desired button on the remote control for 2-3 seconds. To configure several remotes, repeat the procedure for other remotes.

How to program the Nice Remote

Nice's consoles meet two types - on a fixed code (blue case) and dynamic code (black housing)

The Nice Flo programming with a constant code is performed using the configuration of the two-position DIP switches, both in the remote control itself and in the radio channel. Be careful - the variations must coincide. If you need an additional console, simply unlock the old programmed FLO remote and install the switches to the same position. These are the elutions of the old sample, today are very rare.

Let us last in more detail on programming the consoles with a dynamic code.

Nice Programming with Dynamic Code

At the receiver, press the key once (delay less than 1 sec.). On the remote control to clamp the key for 3-4 seconds, after which the indicator will flash on the receiver 3 times. This means that the remote is successfully identified and recorded in the receiver. After that, the receiver will be in programming mode for another 10 seconds, during this time,
Necessible, you can record a few more remote controls. After the expiration of time (10 sec.) The receiver will remember all the remote controls and all the buttons on each remote control.

You can also program the remote control can also be remotely, with the help of the previously recorded panel. As a result, the "new" remote control button copies the command from the "old" remote button. ATTENTION! Programming a new console from the old should occur within the receiver action radius

Click the desired button of the new console for 5 sec., Then release, press (without clicking) the button on the old remote control 3 times, on the new remote, press the same button 1 time and release. The console button is written and performs the same commands as the button of the old console.

Remote controls recorded in the receiver's memory, if necessary, can be removed. To do this, it is necessary to carry out the following operations:
Press and hold the button on the receiver, you need to wait until the LED turns 1 time, goes out 1 time, and then flips 3 times, release the button on the third flash of the LED.
If all operations are carried out correctly, then after a small pause, the LED on the receiver will obey 5 times.

It is one of the best on the world market. Thanks to their accurate automation, life becomes comfortable and comfortable, as well as safer. Came devices are available, no problems arise when installing on any gate, it's not worth changing them that your cash is very saved.

As for climatic conditions, it should be noted that manufacturers responsibly approached this issue. The equipment perfectly withstands frost, wind, heat, dust, rain.

Camel's consoles

Top-432Na is the most popular. Due to the fact that it is two-channel, you can control a separate device, such as open a barrier and gate. Frequency 433, 92 MHz. Made using a constant code technology. Size -32x68x13. Works at a distance of 150 meters.

Programming

1. It is necessary to set the distance not more than 5 mm from each other.

2. Press the two buttons simultaneously on the new console and hold them. The indicator flashes with a high frequency.

3. Let's release the button and click on one one that must be programmed. Now the indicator is burning smoothly, does not blink.

4. Turn on the old key chain quickly the key to overwrite. All this must be done to make the light bulb on the new remote control.

5. If everything is done correctly, then the indicator will flash on the "clean" keychain three times. This suggests that the record is performed successfully, that is, the code is rewritten.

Top-432SA - two-channel, works for two devices. Frequency 433, 92 MHz.

Copy

1. The distance between the keyfobs should be no more than 5mm.

2. On the new press and hold the button to which the record will be made until the indicator lights up with even light.

3. When a button is glowed on a new remote control, you need to click on the other from which the code is rewriting.

4. The console must blunt three times. Everything is done correctly.

Top-434NA is a four-channel key chain with a working frequency of 433, 92 MHz.

Came Top-434NA programming

1. You need to press and hold two buttons simultaneously on a new key chain until blinking is changed.

2. The lamp is burning smoothly. Briefly need to press the button to be written to the code.

3. While the indicator is lit on the first, it is necessary to quickly press the key on the second to overwrite the code.

4. There should be a flashing three-time on a new key chain, which indicates a successful result.

Top-432e - new model Series torus. Works in two TAM encoding systems and Tor, which allows you to work with the consoles on those objects where the encoding TOR and TAM was installed.

Programming with TOP-432NA

1. Preparation for programming. Click and hold the button on the first key chain transmitter that you want to program until the indicator starts flashing. Release them on the new console.

2. Click on the button. There should be an indicator without blinking.

3. For ten seconds you need to drive a key chain to the Top-432Na, on which the light is on. Turn on the button on the wizard one once. The LED blobs three times and will go out, which speaks of successful copying.

Top-432EV - Improved Model Top Series. Contains 4096 code operations. 32x69x11 mm - overall dimensions.

Copying the Came Top-432EV keyfob with TOP-432NA

1. Press, then hold the two upper buttons on the key chain, which must be programmed before the indicator starts blinking quickly. Now you need to release two buttons on the Top-432Na console.

2. You need to click on any key that you will program.

3. The light should burn with even light.

4. For ten seconds, bring the Top-432EV key chain from the bottom and rear to the TOP-432NA, where the indicator is lit, press the Top-432NA operating button once. Remote device Ready to work in the event that the light bulb blobs three times.

Camels are novelties, which are designed to protect the radio control code, illegal copying outsiders. Two-channel and four-channel are available. Rounds with a dynamic code system.

CAME TWIN CONTAMOR PROGRAMMING

1. It is necessary to have an already authorized key chain, which is already entered in the system using the receiver button.

4. For twenty seconds, click on the button of the new key fob once.

5. We are waiting for about twenty seconds until the radio receives from the so-called programming mode.

6. The new code is introduced. This procedure You can do with the following console. But it is very important: one radio receives no more than 25 keyfobs. Also disconnect those receivers that are close to which you do not need to enter a new code.

Came TCH-4024 and TCH-4048 - four-channel and eight-channel transmitters with a frequency of 40 MHz. Touch is a new generation sensor, allows you to manage multiple objects. There is protection against accidental keystrokes.

Copy Camert Touch

1. Press and hold the two upper buttons at the same time while the indicator starts to flash more often.

2. Press the button to be activated. The indicator will light up with smooth light.

3. Apply the working key chain from behind to a new one for ten seconds and click on the (Work) button, hold for a few seconds.

4. The indicator must freeze three times if everything is performed without errors.

Came and -Dvkhanny and four-channel with a dynamic code. Atomo is a comfortable, elegant console that guarantees excellent work to customers. Provides the reliability of the outgoing signal.

CAME ATOMO CONTROL CONTROL

1. Select the zone of excellent reception, not more than five meters.

2. On the running keychain, press and hold the button until the fifteen seconds will burn the indicator smoothly.

3. On the new device to keep the button once about twenty seconds.

4. We are waiting for fifteen seconds and check the work of a new key chain.

NICE.

Engaged in the production of an automated system for gates, barriers and doors. This Italian company occupies a leading position in the world of automation. Nice products reliable, high-quality, time-tested.

The ability to manage all the processes (close the gate, open rolets) by one console, without leaving home.

Nice Flo 1, Flo 2, FLO 4 - Dynamic code. Frequency 433.92 MHz. Response range up to 150 meters. Dimensions 72x40x15. Release single-channel, two-channel, four-channel.

Nice Flor 1S, Flor 2S, Flor 4S. Single-channel, two-channel, four-channel models are available. Radius of action - 150-200 meters.

Nice Flo, Flor Programming

1. Next to be the receiver.

2. The consoles must be sequentially located.

3. Press the button any on the new and hold for about five seconds.

4. Press the button three times the button.

5. Now we press this button once, which has already been pressed first and release.

Nice ON 1, ON 2, ON 4, ON 9- Rests with a dynamic code. Elegant view, small dimensions. Works under all weather conditions. There is a special ring for mounting on the keys. Control frequency 433 MHz.

Nice ON Pattakes Programming

1. The two consoles must come into contact the upper part.

2. Press any button on the new key chain and hold while the light is not lit up on the old one. Let's release the key, and on the second it must turn the indicator.

3. Press any button on the old key chain, hold on the new button until the indicator lights up.

4. Release the button on the old key chain. Forecast indicator in the new is a successful programming.

Nice Very Ve is a two-channel panel with a statistical code.

Nice Very VE Programming

1. Press the two buttons simultaneously until the light is turned on.

2. Press the top key if the first switch on the "ON" position on the receiver. Press the bottom button if the microswitch is in the "OFF" position.

3. Clause number 2 repeat for all ten microswitters that are located on the receiver.

4. The LED will begin to blink quickly if the tenth switch is turned on. While it flashes, if the buttons are not pressed, then the code will be saved in memory.

Nice Very VR-two-channel key chain with floating code. Frequency 433, 92 MHz.

Nice Veri VR CONTOLERIA

1. There must be a remote, which is already recorded in the receiver. There is always a record of the first to the receiver with a floating code using the receiver button.

2. For five minutes we transmit code by holding the key of the new console.

3. Press the button of the old device three times.

4. Briefly press the button of the new console. All recording is completed.

HORMANN - Quality Time Tested

Germany products. Reliability, convenience, beautiful design.

This manufacturer produces consoles with the same design, but with different radio frequencies. They differ in color buttons: blue (868 MHz), green (26, 975 MHz), gray (40 MHz).

HORMANN HSM 4 - four-channel remote control For gates and barriers. Overall size 37x110x13. Frequency 868 MHz. Dynamic code.

HSM 4 console programming

1. Place the head to the head "key rings.

2. Press the button on the old panel and hold. Light bulb should burn constantly.

3. Press the programming key on the new console and retain. The indicator will first flash slowly about four seconds, and then after successful execution it will flash faster.

The HSE2 remote control is two-button. Key ring. Frequency 868 MHz.

HORMANN HSM with a frequency of 40,680 MHz. Two-button and four-button.

HORMANN HSM 40 MHz Programming

1. Place new remote Near the old one.

2. Click on the button of the old console and hold.

3. Press the corresponding button on the new console. The LED must blink four times.

4. Release the buttons.

HSP4-C - the remote control for the gate and barriers. New design. Beautiful appearance. Frequency 868 MHz. Dimensions - 48x48x13 mm. The number of buttons is four.

Copying the HSP4-C console

1. Locate key chains next to each other.

2. Press the transmitter key that inherits the code and hold it five seconds. The indicator should burn constantly.

3. Then click on the button that you want to program on a new key chain, hold it. For about four seconds, the light bulb will flash slowly, but after successful task execution - faster.

4. We release the keys on both consoles.

Doorhan.

Doorhan is a major automotive supplier for gates, remotes, radio receivers. Focusing the world market.

Doorhan Transmitter 2, TRANSMITTER 4 - Remote Code Restants. The operating frequency is 433 MHz. Designed for remote control of two and four automatic devices Doorhan, as well as to any other automatic with the available DoorHan radio receiver. One keychain can be controlled by two (four) gates, barriers.

Doorhan programming with DHRE-2 receiver

1. Clean the memory of old codes. After turning on the power, hold the recording button for about 10 seconds. The indicator will flash 10 seconds, then it will go out, then blinks twice. All old codes are removed.

2. To record the console code, click and keep 3 seconds the SW1 key on the receiver board. Then click on the button on the console 2-3 seconds.

3. If the tincture of other consoles is required, then repeat the code record.

You can program a specific control channel by each key.

BFT products guarantees quality and reliability

BFT -12, BFT -12 - two-channel, four-channel consoles. Frequency 433.92 MHz.

Programming CFT remotes

1. Press the "OK" button. A greeting will appear.

2. Click the "OK" button. We see the first section of the "Raareter" menu.

3. Now press the "-" key several times, the Radio menu appears.

4. Press "OK" again and see that the section of the adding chain menu appears in the memory of the AD START radio.

To add brass needs:

1. Press the "OK" button is the inscription "Hidden Button".

2. Press two key fob buttons to write.

3. The "Relise" inscription will appear, and then "Desired Button".

4. Press the remote button.

5. Appear "OK \u200b\u200b1". Everything went successfully.

6. To record other keyfobs, we will do everything by analogy.

7. After the recording of all the remotes is made, press twice the buttons<+> and<-> At the same time.

FAAC - a recognized leader in the manufacture of automatic barriers, gates

The Italian firm is known not only in Europe, but also around the world.

XT2-868 SLH, XT4-868 SLH - two-channel and four-channel remote control for gates and barriers from 868, 35 MHz frequency. Works at temperatures from -20 to +55 C. Radius up to 50 meters.

FAAC DL2 868 SLH, FAAC DL4 868 SLH - outdated models, removed from production. Two-channel and four-channel. The new XT series consoles completely replace the previous ones. They differ only with stylish design, improved characteristics.

Programming the FAAC XT2-868 SLH and XT4-868 SLH series

A master keychain is needed, that is, the one that is recorded first (master), as well as a new remote control (Slave).

1. Press on the old device of the P1 and P2 buttons at once for two seconds. The LED blinked, then you can start programming, as he saw this device.

3. The indicator burns constantly. Click on the old remote key to overwrite.

4. Click on the Slave button for programming. We release the button after the light bulbists twice.

5. All copy is completed. Actions can be done on all other buttons and other consoles.

In conclusion I would like to say that now in our time the automatic control system is installed on all types of barriers, gates, doors. You can control using a separate console, which greatly increases the level of security, especially from theft.

Use the automatic console is one pleasure. The main thing is that you can always carry it with you on a bundle with keys. You can also, for example, in bad weather, without leaving home, use it. Everything can be selected and installed at the request of the client.

Automatic systems for the entrance gates make it possible to open a passage with the help of the control panel is so simple and comfortable that, upon failure or failure of the program, many drivers do not remember how to open passage into the courtyard. In this case, you have to search for a duplicate console from the gate or remember how the device is programmed.

How to correctly perform the programming of the console

A properly configured device is a rather complicated device. When you click on the opening button, the sequence of signals is sewn in the device's memory. Signal sequence is sent by radio channel to receiver automatic gate. In this case, the following happens:

• The received signal is decrypted by an electronic chip;
• The signal from the remote control is checked with a signature recorded in the memory of the control unit;
• Confirmation is sent to the output of the gate into the console memory.

Tip! Of course, for users all subtleties of work automatic system Management gates to know no need. It is enough to know how to program a remote to the gate to make a duplicate device in case the original will be lost.

For these purposes, you can order a console from the company that has installed an automatic gate system, but easier and cheaper to use a universal key chain suitable for your remote.

Universal remotes for gates and barriers

The main difference of the corporate console from universal device It is that in the latter there is no exactly fixed frequency of radio programs, as the manufacturers of automatic gates do in their key rings. The universal keychain can be configured to the format of the work of one of the few, about 10- 20 types compatible with the "universal" patterns of remote controls. So the versatility of such a device is slightly overestimated.

It is clear that you can use the universal control panel only if it is properly programmed. To do this, it is necessary to rewrite the control program from another remote. Pour the program in memory of the universal keychain immediately after turning on the device. If you did not transfer for 5 seconds, the possibility of reprogramming is blocked, so after switching on, you need to immediately translate the "wagon" to the programming mode by pressing the appropriate button, after which the device will make the readiness signal for receiving information.

Next, we take the old corporate instrument and press the "Mode" button until you heard two short signals, then press the opening and closing of the gate in turn. Successful implementation The transfer is confirmed sound signal Of the three impulses.

Each key chain or the remote control has its digital name, which is covered in the memory of the gate control unit, so before starting to use the new block, it must be registered in the memory block memory. To do this, press the button for three seconds on the old one and on the new console, then we remove the branded key chain, and click on the new one again until a three-time signal appears.

Programming branded management devices

Each manufacturer of automation to manage the gate uses approximately the same command sequences and methods of programming the console. The difference may consist only in the indication of the operations performed or the method of data exchange. Most often in remote control systems use:

1. Permanent control key stitched into a memory block. The complexity of the key and high length allows not to be afraid of hacking the gate control unit using foreign appliances;
2. Dynamically changeable encrypted key. In this case, the control unit may transmit a new digital sequence as an access identifier to the control panel.

For your information! In ordinary chinese systems The gate management is most often applied by the first option, in expensive Italian and German automata used the second control principle.

Camel for the gate "Came"

To illustrate, you can consider the transfer procedure service Information On the new programmable keychain on the example of the model model 432 SA. Today it is one of the most common variants of a two-channel automatic gate control system.

The transfer of the program is performed in the following sequence:

1. To begin with, we have old and new key rings at the most convenient distance, but not more than 5 m. On a new device, press and hold a couple of the first buttons until the indicator starts flashing quickly;
2. On the programmable console, we click the desired button to be selected by the appropriate command from the old, the indicator will light up with a smooth light. For ten seconds, press the desired command on the old instrument;
3. With successful transfer, the new key chain is blinking the indicator.

A more complex is the procedure for programming the CAME TWINS system by a dynamically changing code. In this case, before transferring the program, the procedure for registering the keychain in the memory of the control unit is required. Transferring information is performed through the control unit. For this click start button On the old block and hold it until the indicator will burn with a smooth light without twinkling.

To get a cipher on a new remote, you need to click on it just once. Next, the key rings will be automatically from the programming mode.

The remote for the gate "Faac"

The company "FAAC" from Italy is known for its systems for automatic, remotely managed gates. The programming procedure of the device is not particularly different from previous options.

For example, for the XT2-868 SLH model, the transfer of information is performed in the following sequence. First, on the old remote, you must simultaneously press the two first buttons, about two seconds. The console goes into the information transfer mode. The new device must blink, thereby sign up for the beginning of the overwriting. In consistently first on the old one, then we press the button that you want to overwrite, after which the indicator must be blinked twice. Similarly, all commands are transferred.

Programming the keychain of the gate "Nice Very Ve"

This model works using a statistical code. Before transferring the service information, you will need to operate the receiver panel and perform the appliance encoding according to the location of the switches on the board.

First, press the two first buttons simultaneously until the indicator lights up without flaming. We look at the position of the first microtumbler, if it is "included", then we press the upper button on the console, otherwise the bottom. In this way, it is necessary to "go through" all ten microtumbler fees. To save the information, you must enable the last switch for ten seconds. The blinking indicator confirms the information record.

Conclusion

The modern element base used in the control panels and receiving blocks of the gate is developing very quickly. Today, most managerial management functions are successfully performed using emulators on mobile phones, tablets or even gaming consoles. The only way to prevent the possible hacking of the service information is to use the most simple and low-power systems, the signal of which is not possible to take further 5-6 meters.

Today in the world market there are many manufacturers who are engaged in automation. Its necessary to be able to properly program that the necessary technologies well work well.

Now we will look at the remotes from the gate. If you perform their exact setting, then you will protect yourself from the penetration of intruders and make life much more comfortable. You can also use the keychain not only for the opening of the gate, but also for other devices. Let's look at how to program a remote from the gate.

Camel's consoles

This company occupies leading places for the production of universal remotes. They are withstanding various climatic conditions, and they are easy to program.

TOP-432NA.

Came today is considered the highest quality and reliable. She can find many good consoles. According to consumers, the highest quality model - TOP-432NA. What is it connected with? This remote control is two-channel, which allows you to work immediately with several devices, namely, it is possible to open several devices at once, for example, a gate and barrier. Its frequency is 433.92 MHz. This model is capable of working at a fairly long distance - 140 meters. How to program a remote from the Gate Came?

1. At the first stage, it is necessary to close the remote control close to the goal.
2. Next you need to press 2 buttons. Hold them while the light bulb will not flash.
3. After that, click on any button, you just need to choose which will be used for the gate. If the indicator begins to burn exactly and stop blinking, then you did everything right.
4. We take the old remote, which went with the gate, and press the button to overwrite the code. It should be remembered that everything needs to be done quickly, while the light is on on the CAME remote control.
5. When the indicator blinks on the new console several times, the overwriting will end. Now you can use it to work with the gate.

Four-channel TOP-434NA

This remote is similar to the first model. The only difference is the size and number of devices that can be programmed. The frequency remains the same. Top-434NA - remote control. How to program it?

1. As in the first case, you need to bring the remote control to the goal and click on two keys simultaneously. We are waiting until the LED will begin.
2. Click one of the buttons to start writing on it.
3. Next, press the button on a special panel to overwrite the code.
4. After the indicator will flash 3 times, you can start using this remote. The data was successfully overwritten.

Top-432ee

Recently, a new key chain from the Top - Top-432ee series has appeared. It can allow working with devices to programming various encodings, such as there and torus. To start working with this remote control:

1. You must click on the new key chain that you want to further use to work with the gate. We are waiting until blinking on the indicator appears, and let go of the button.
2. Repeat pressing on this button.
3. After action performed, you need to quickly reduce the old console to the Top-432. Press it a key that allows you to open the gate. When the LED blinks 3 times, you can start using the device for the direct purpose.

TOP-432EV.

This remote is considered an improved version. previous model. It has quite small sizes, which allows you to wear it in your pocket. Also, the TOP-432EV may contain 4096 code operations. How to program this keychain?

1. As before, we clamp the two keys until you see the light bulb flashes. Next, let go and go to the next action.
2. Select the button to move the data.
3. We are waiting a few seconds to a permanent loss of the LED.
4. We bring a new console to the bottom of another keychain and wait until the overwriting is performed. It usually takes about 10-20 seconds. When the LED blinks 3 times, you can be sure that the recording has been successfully completed.

Came Twin.

Another novelty is the key chain Came Twin. It has one feature - code protection. Sustier people will not be able to just take possession of the code to open your gate. They are also produced in various variations - two and four buttons. Came Twin is capable of working with a dynamic code. How to program a remote from the gate?

1. First you need to make sure that this key chain can already be used and there is a button for receiving the signal.
2. Drive the remote as close as possible to the receiver.
3. Next, we take the old key chain and press the key where the required code is recorded. We are waiting until the LED is lit.
4. After 10 seconds, press the key, which is on the old panel.
5. After about 20 seconds, the code recording process will end.

NICE.

The Italian company NICE is located in the top of the production of automated systems for various equipment. Their products are quite high quality and reliable. Of course, they have universal consoles that allow you to manage some processes at the same time. How to program the remotes from the Nice gate?

Nice Flo and Flor

Keychains from NICE are quite simply programmed. All models of the FLO and FLOR line can work with a dynamic code at a frequency of 433.92 MHz. They can work, even if you are at a distance of 140 meters from the required object. The consoles are released with one, two or four keys. Consider on the example how to program the remote from the Nice Flo2R gate.

1. First you should approach the receiver.
2. It is necessary to arrange the consoles consistently.
3. Next, select the key to record the code and click on it.
4. After 5 seconds, you can click on the button that is used to open the gate on the old panel.
5. It remains only to repeat the keystroke on the first palette. The button programming is completed.

Hormann.

This is a German firm that makes a bet on quality. Her products are quite reliable and beautiful. The manufacturer stains various buttons in different colors to determine for them certain frequencies (Blue - 868 MHz, green - 26,975 MHz, gray - 40 MHz).

HORMANN HSM 4.

This model is equipped with four buttons that allow you to control various equipment. HORMANN HSM 4 has a frequency of 868 MHz and the ability to use dynamic code. You can also note the rather small size of the keyfob. How to program a remote from the gate HORMANN HSM 4?

1. We place a new panel near the old one.
2. After that, you must press a key with which reading will be performed. We are waiting until the light bulb will be lit.
3. Next, you need to click on the key that you need to use later. After 5 seconds, the LED will flash quickly. Code transmission completed.

HORMANN HSE2 and HSM

HSE2 has a two-channel mode of operation, and HSM is two and four-channel modes. It has a small size, which allows you to cling it to the keys. The first model operates at a frequency of 868 MHz, and the second is 40,680 MHz. To program them:

1. First you need to position the consoles close to each other.
2. We take the old key chain and click on the key with which you want to read the data.
3. Next, press the key you select to use in a new console.
4. It remains only to wait for the flashing LED. We release the keys and we can start using this console.

Doorhan.

Doorhan is a Russian company. She has long been on the world market and supplies high-quality equipment for automating work with goal and radio receivers.

Doorhan Transmitter 2, TRANSMITTER 4

These models work with a dynamic code at a frequency of 433 MHz. As you have already noticed from the name, key rings can work with 2 or 4 various devices. How to program the remote from the doorhan gate?

1. First you need to delete old records. To do this, press the key with which you can record, and wait. After 15 seconds everything will be deleted.
2. Next, click on the SW1 button (or any other you want to program) and on the old key chain for writing data. We are waiting for a few seconds.
3. This is completed on this. You can proceed to use.

Company BFT.

The most common consoles of this company are BFT Mitto 2-12, BFT Mitto 4-12. They are two and four-channel, respectively. Could work at a frequency of 433.92 MHz. How to program the remote from the BFT gate?

1. To transfer the data, press the OK key.
2. Next, go to Parameter and click a couple of times on the "-" button.
3. We repeat pressing OK. After that you will find yourself in the menu where you can add the device.
4. Click on the AD START key and click on the required button.
5. Next, we click on the appropriate key in the old key chain and wait until the data is converted.

FAAC

This is a rather popular Italian company. Its products are used in many countries of the world.

FAAC XT2-868 SLH and XT4-868 SLH

These models are used to control two or four devices. XT2-868 SLH and XT4-868 SLH operate with a frequency of 868 and 35 MHz, respectively. They can also be used in various climatic conditions. How to program a remote from the FAAC gate?

1. First you need to simultaneously press the P1 and P2 buttons to program the keychain.
2. Next you need to arrange the consoles together.
3. As soon as the LED starts to burn, you must hold the key on the old device, which will be used in the record.
4. In the new console, select the Slave button. After 15 seconds, the recording will end. Next, you can start using this console.

Conclusion

Today you can program the considered remotes for many devices. How to program a remote from the gate? As you might notice, this is done quite simple. In many consoles, actions are very similar. So that everything went to successfully, hold the instructions. Console You can choose any firm what you enjoy. Of course, you should choose the desired frequency. It will be important parameter When choosing a remote.

In the life of each person there comes a moment when the accumulated number of consoles goes the critical point and you need to combine some of the consoles among themselves, so that they are finally not to scream in them. Here is one of the solutions to this task.

What do you usually need a person in front of the TV? Enable / disable it, adjust the volume and switch channels. Multiple buttons on one remote. Everything is simple. When this process is wedged digital television, another remote appears (yes, I have old TV Without built-in tuner T2).
I also shown in this situation a stupid behavior of the native console from T2 tuner. He worked with new batteries at a very sharp corner of the attack of the LED on the tuner. 20 cm left to the right and up and that's it. I had to press the button several times and look for a suitable position of the console, which was uncomfortable.
15 minutes from Aliexpress search and the order is issued.22 in the way and the remote control in your hand.

Dimensions: 174x29x20 mm.
Power Type:2x AAA batteries.
Number of buttons:6

Photos of the console:

Conveniently. It lies well in hand, nothing creaks, the plastic is durable and pleasant to the touch. The edges on the edges are not felt, the buttons are large, elastic, pressed with pleasant effort, while pressing the diode at the top of the console (I will not say that this is an advantage. It will be necessary to take care of the reduction of its brightness).

Dimensions for comparison with home consoles:




Programming the buttons of the remote control just, just-two-three:
- Press the Power and Channel Up button on a universal console. (LED freeze)
- Press the button for programming on a universal remote control (the LED caught fire constantly, waiting for the signal)
- Press and keep the appropriate button on the remote control (after receiving the command diode blinks)
- We repeat so six times.
- To complete the training, press the POWER and CHANNEL UP button on the universal console. (Traffic LED) or waiting for 10 seconds.

All buttons are configured, you can postpone the original consoles in the side and use this magic wand. The IR LED is quite powerful and lens discovers from the housing so that you can send a signal in the opposite direction and a tuner with a TV without problems will be taken.
Switch errors is not observed, the family quickly got used to a new assistant.
Thank you for reading my mini-review.

Video unpacking and learning process:

I plan to buy +105 Add to favourites I liked the review +61 +105