"Working horses" Hi-Fi: collect the budget system. How to choose an Hi-Fi speaker system? Best Chinese Acoustics Home

Updated: 02/03/2019 15:54:56

Expert: David Weinberg

* Overview of the best editorial board. On the selection criteria. This material is subjective, not advertising and does not serve as a guide to purchase. Before buying, you need consultation with a specialist.

Outdoor acoustic systems - the way to turn the living room to the place of recreation and relaxation. The volumetric sound of music will take you to a concert of the beloved artist, and while watching the film, you seek the adventure with the heroes. No other audio will give such an immersion effect as a high-quality floor acoustic system 5.1 or 7.1.

For lovers of high-quality and voluminous sound, we have made a rating of 8 best outdoor acoustic systems - for any budget and scenario of use.

How to choose outdoor acoustics

When choosing an outdoor speaker system, pay attention to the following parameters:

1. Type - phase inverter, closed, passive emitter, roof, Bandpass and others;
2. Number of strips;
3. Power;
4. The presence of a built-in amplifier;
5. Range of reproducible frequencies;
6. Sensitivity.

Type of acoustic system Consider the most important parameterBut in fact - only a pre-prepared audiophil pedant with a test record can distinguish the sound of the phase inverter from any other. However, if you want to choose the perfect device for reproducing your favorite music genre, it is necessary to take into account the following key distinctions for each audio formation option:

1. Closed type It has high reproduction accuracy and low levels of distortion, but the sensitivity (in fact, the volume of the volume) and the depth of the bass leaves much to be desired;
2. Phaseinverter - The most common type. It has high sensitivity and excellent depth of bass, but the detailing of the sound is not the best;
3. Passive emitter by acoustic characteristics similar to a phase inverter, but it provides an even deeper and detailed bass, not the "spoiled" noise of the resonator tube;
4. Open columns Provide directional sound, which allows you to create an acoustic area in the room. But deep, "tangible" bass from them do not wait. A variety of open columns are audio systems of a horn type;
5. Bandpass., or strip body, provides a high sensitivity of the speakers - it sounds louder than the phase inverter or the closed type.

But it is worth noting that almost all outdoor speakers are now performed in the phase inverter type. It shows the most optimal characteristics of the sound. Most of the systems in the ranking are a phase inverter type.

Number of bands In general, you can imagine how simple the number of device speakers. However, if you deepen, it turns out that this parameter determines the sound detail. So, single-band acoustics is used only to play a single frequency segment - for example, it can be tweeter ("Cook") or a subwoofer.

Golden Mid are two-band audio systems, in which one speaker reproduces low and part of the average frequencies, and the second is high and second part of the average. Such a configuration will be enough for most not very demanding users.

The ideal solution for outdoor acoustics from one device is three-band systems. In them, one speaker reproduces high frequencies, the second is the average, and the third is lower. Good details can also be achieved from 2.5- and 3.5-strip acoustic systems.

Power and sensitivity - Two similar parameters that show approximately the same value: Volume.

That's just sensitivity clearly shows the volume of the speaker system. If the value of this parameter is specified - for example, 84.5 dB - this means that the maximum of the column will be able to "squeeze" just the same 84.5 decibels.

Power - a little more vague value. It indicates not only the actual volume of music, but the sound pressure - which is achieved, for example, when playing low or ultrahigh frequencies. So for bass lovers who have no neighbors from below, speaker systems with high power are suitable - from 70 W.

Availability of built-in amplifier It is important for owners of medium or low class audio equipment. Very often, classic tape recorders, digital players or even vinyl pickups provide extremely low power, which is enough for the "Runcher" except headphones with a small impedance. Therefore, such devices require an external amplifier.

If an external amplifier is already available, then the built-in acoustic system is simply not needed. And in some cases it is also able to prevent.

Range of reproducible frequency It is worth noting only for the reason that marketers often use this parameter. Outdoor acoustics, which is not exclusively subwoofer, is not able to reproduce the frequency below 35-40 Hz. So if in the characteristics of the column it is indicated that it easily publishes the sounds in the range of 20-20000 Hz (range that is able to hear a person), then we are talking about dust in the eye, or about a good device or a subwoofer.

Rating of the best outdoor acoustic systems

Nomination	a place	Name of product	price
Rating of the best outdoor acoustic systems	1		63 990 ₽
	2		174 990 ₽
	3		169 900 ₽
	4		40 490 ₽.
	5		44 900 ₽
	6		29 990 ₽
	7		25 990 ₽
	8		9 290 ₽.

Why she: three-band acoustic system with high power and low impedance.

Outdoor acoustic system Canton GLE 496 is one of the best solutions for home use. Thanks to the three-band structure, it provides a detailed, saturated sound, and high power in 150 watts ensures not only the volume, but also tangible bass.

The maximum power of the audio system is 320 W, so it can be used with good amplifiers. However, due to the sensitivity of 90.5 dB and the impedance of 8 ohm column will be compatible with almost any reproducing equipment.

It is worth noting that the column is equipped with two low-frequency dynamic emitters. Due to this, it can well be used without a subwoofer. The lower threshold of the reproducible frequency is 20 Hz. Bass saturated and tangible. For medium and high frequencies correspond to two dynamic emitters, respectively.

Pleasant addition - gilded connectors.

Dignity

• Excellent construction scene;
• Powerful, tangible bass;
• High-quality body assembly, acoustically isolated.

disadvantages

• The appearance of "silver" high frequencies at high volume;
• No possibility to connect via BI-Wiring;
• A slightly overpriced medium and high frequencies, but it increases the detail of the sound.

Why it: 2.5-band outdoor acoustic system with Bi-Wiring connectivity.

The main advantage of this acoustic system is suitable for use with high-class amplifiers, which are derived separately high and low frequencies. It supports the separated connection of these channels thanks to Bi-Wiring technology. However, with a classic connection method, it is also compatible - a high-class crossover is built into the device.

2.5-band architecture includes three dynamic emitters. Low-frequency consists of two 150 mm devices, and high-frequency has a ribbon configuration. The total power of the device is 120 W, but if necessary, it can "rake" to 160 W. The acoustic design provides the range of reproducible frequencies in 30-50000 Hz.

Additional pluses serves as low impedance in 3.4-8 Ohm and gilded connectors.

Dignity

• High sound detail, suitable for music, and for movies;
• Rich equipment;
• Quality, reliable assembly.

disadvantages

• The housing is very easy to scratch;
• Not suitable for use with receiver, only with amplifiers;
• High price.

Why she: flagship outdoor speaker system, ideal sound setting.

This floor acoustic system is suitable for the most demanding lovers of high-quality sound. Thanks to a special configuration, developed emitters and case materials, it provides high detail and no overload over frequencies. Music sounds like it was conceived.

Acoustic configuration - three-band. In this case, the low-frequency emitter consists of two 165-millimeter speakers. The sensitivity of the column is 91.5 dB, however, it is recommended to use the device only with amplifiers - with a capacity of 40 to 250 watts. The presence of four speakers provides a wide range of reproducible frequencies - 45-28000 Hz, and thanks to high-quality electronics impedance low - from 2.9 to 8 ohms.

The supply of an acoustic system includes an additional set of removable grids for dynamic emitters that are capable of changing sound characteristics.

Dignity

• Excellent phase inverters configuration;
• Excellent resolution in the entire spectrum;
• Attractive design.

disadvantages

• Do not support Bi-Wiring Connection;
• Very long heating, which takes up to several months;
• Need to powerful amplifierIt is advisable to use models from 100 watts.

Why it: an excellent combination of price and technical characteristics.

Despite the fact that this outdoor speaker system is practically impossible in the characteristics of the previous models in the ranking, it costs it much cheaper. This makes it a good solution for people who want to enjoy high-quality sound, but at the same time they are not ready to spend large amounts of money.

The acoustic system is three-way, and the low-frequency emitter consists of two speakers of 203.2 mm each. High-frequency "Cook" is small, 25 mm, but the same is installed in other models. Stock Power of speakers - 100 W, but when used with a good amplifier, they can "rake" to 250 W. Other technical specifications include a sensitivity of 89 dB, the average impedance in 6 ohms and a relatively wide range of reproducible frequencies - from 30 Hz to 35 kHz.

The speaker system supports Bi-Wiring connection.

Dignity

• Excellent bass sound, capable of surpassing on it even some models of subwoofers - especially if installing without legs;
• Saving sound quality on high volume;
• Attractive design.

disadvantages

• The rear layout of the phase inverter does not allow the columns close to the wall;
• It is required to use a good amplifier or receiver, and Yamaha is also desirable;
• Solition affected by scratching.

Why she: good sound at a relatively low price.

One of the best budget options. The kit includes two front loudspeakers, each of which has two-band acoustic configuration. This ensures a volumetric sound with a realistic scene.

As it is presented in more expensive models in the ranking, each of the loudspeakers is equipped with three speakers. Low-frequency is represented by two 177.8 mm, and high-frequency - 25-mm dome. Thanks to this configuration, the range of reproducible frequencies is from 40 Hz to 26500 kHz.

The acoustic system is quite powerful - its sensitivity is 90 decibels. It is recommended to use with amplifiers by 30-150 W. Due to the electrical electronics, the impedance of loudspeakers is only 5 ohms.

Gold-plated connectors serve as a pleasant addition.

Dignity

• Good high frequency sound, excellent detail;
• Perfectly divide the strips;
• Attractive appearance.

disadvantages

• No support for Bi-Wiring (but it is compensated by an excellent splitting of the loudspeakers themselves);
• Prolonged "warming up", about a month;
• Marking coating that is easily "collecting" scratches.

Why it: one of the most budget options with Bi-Wiring support.

Despite the fact that technically these columns relate to the category of relatively budget, they provide good sound and at the same time support Bi-Wiring. Due to this, the speaker system can be used with amplifiers of medium and top segments.

Acoustic configuration - three-channel. In each column, four dynamics are installed, two 170-millimeters correspond for the lower frequencies. Power is 170 W, but if you wish and using a good amplifier, it can be increased to 300 W. The sensitivity of the acoustic system is 91 dB, and thanks to good conductors impedance - only 4-8 ohms. Finally, the range of reproducible frequencies is from 25 Hz to 40 kHz (however, up to 25 Hz warm-up, "from the box" is capable of playing only about 40 Hz).

Why she: attractive concise design, good specifications.

Thanks to attractive design, this outdoor speaker system will not only delight lovers high-quality music, but also a beautiful interior. And while the device is cheap.

Acoustic system - two-channel. In this case, the low-frequency emitter, as in many other models in the ranking, is represented by two speakers with a diameter of 165 mm. High-frequency "Cook" has a standard size of 25 mm.

A pleasant feature of this outdoor speaker system is high sensitivity, which is 89 dB. However, the device is still better to use together with the amplifier, the recommended power of which is from 15 to 250 W. Other technical characteristics of acoustics include the middle impedance in 8 Ohm and a relatively wide range of reproducible frequencies - from 46 Hz to 25 kHz.

Despite the fact that this outdoor speaker system is the cheapest in the ranking, it provides quite good sound quality. Especially when installing in small rooms and listening to music in digital non-vigorous formats.

Acoustic configuration - two-band, and the low frequency emitter classically consists of two 165 mm speakers. The power of the device is 50 W, but when used with a good amplifier, the system can work short time at 180 W. Sensitivity of acoustics - quite good for its price and is 88 dB. The special configuration of the "filling" provides low impedance in 6 ohms.

Also, the acoustic system boasts a wide range of reproducible frequencies - from 37 Hz to 30 kHz. Moreover, in many cases, even the warm-up is not required - the entire spectrum is available from the box. Like older models, there are gilded connectors.

Dignity

• Branded soft sound without overload for any frequencies;
• High power, support for high-quality amplifiers;
• Good, neat assembly.

disadvantages

• Thin back wall, not the best phase inverter;
• Sensitive to installation, it is recommended to place by 40-50 cm from the wall;
• High volume tweeters bad work.

Attention! This rating is subjective in nature, is not advertising and does not serve as a guide to purchase. Before buying, you need consultation with a specialist.

For many users, the choice of active acoustic systems for the computer is a very difficult task. And it is not surprising, because there are hundreds of similar models of columns on the market, and information can now be learned from numerous sources - from articles on online and offline press, from site manufacturers on the network. True, sometimes there is only a meager description and a list of almost the same for all models of technical characteristics.

Nothing else remains the user how to choose the acoustics suitable for him. We will try to help you in this, explaining what you need to pay attention to first, but what to treat with the fraction of skepticism. We will also try to figure out what sound you can hear from the columns of a particular class.

PC classification by appointment

First of all, you need to decide: for what purposes you need acoustics, and what you are guided by its choice. There are two main directions for the use of computer column:

Criteria when choosing PC acoustics

Consider the three most common circumstances, on the basis of which the choice is carried out:

As you can see, everything is not so unambiguous, as it seems at first glance. If you plunge even deeper and start analyzing the available range of goods and the ability / needs of a specific buyer, then for everyone there will be its best purchase. So advise specific models - unusually difficult. However, we can warn the reader at least from elementary errors when choosing acoustics.

We want to immediately warn you from hasty conclusions when comparing acoustics according to the technical specifications listed on the manufacturer's website or in the product passport. It should be borne in mind that the marketing department will never lose the opportunity to "inform the buyer" and specify the most favorable data. Whatever the numbers you see, do not share and treat them skeptically. For example, in some columns they write: "Power 100 W, distortion of 0.01%". All this is wonderful, but the problem is that the power and distortion was measured separately. Power - at 10%, and distortion - at 1 W. At the same time, such "strange" measurement conditions are certainly described somewhere in the corner with small letters so that with a possible proceeding of the user there was no grounds for complaints.

We also always advise you to listen to the purchase of the column you selected before buying. If there is an opportunity, immediately compare the sound quality with some alternative solution. Moreover, the smaller the temporary gap between these hearing tests, the plausibility and correct will be your conclusions. No commemorative sensations from listening to the acoustic system (like "I listened to a neighbor last week") in the calculation to take categorically impossible. They are not suitable because the perception of sound depends on the psychophysical state of the individual at the moment, plus, the auditory sensations of a person (especially with inappropriate) are very fuzzy and quickly erased from memory.

Now about acoustic systems that include several columns. As you know, among multilone configurations, there are mainly 4.1, 5.1, 6.1-systems. Externally, they differ in a little: 5.1-acoustics, in contrast to 4.1, it has a bundle on one column (the so-called "center"). But in fact, the difference is not only in this. It all depends on which sound card is installed in your computer.

If you use a four-channel audio card with a 5.1-set of acoustics, then the center and subwoofer will not play. If you use a six-channel card with a 4.1 set of acoustics, then you never feel the full six-channel Dolby Digital and DTS formats that I would not write the acoustics manufacturer about your super-dupper of the Virtual Central Channel technology. The reason lies in the absence on 4.1-systems of individual inputs for the center and subwoofer (although the four-channel mode of operation, as well as the stereo, for such cards, be sure to exist and can be easily selected in the settings).

Detailed decoding of some characteristics of acoustics

Power

Under the word power in colloquial speech, many imply "power", "power". Therefore, it is quite natural that buyers bind power with volume: "The more power, the better the speakers will sound louder." However, this widespread opinion is in the root mistaken! Not always a 100 W column will play louder or qualitative to the one that shows the power of "total" in 50 W. The value of the power rather does not speak about the volume, but about the mechanical reliability of acoustics. The same 50 or 100 W - this is not at all the volume of soundcolumn published. Dynamic heads themselves have a low efficiency and convert only 2-3% of the power supply to them into sound oscillations. electrical signal (Fortunately, the volume of the sound of the published is enough to create sound accompaniment). The value indicated by the manufacturer in the passport of the dynamics or the system as a whole, only says that when taking the signal of the specified power, the dynamic head or an acoustic system will not fail (due to critical warming up and intersensional KZ wire, "snacking" frame of the coil, diffuser bursting , damage to flexible suspensions of the system, etc.).

Thus, the power of the speaker system is a technical parameter, the value of which is not directly related to the volume of the sound of acoustics, although it is associated with some dependence. The nominal values \u200b\u200bof the power of dynamic heads, an amplifying path, an acoustic system can be different. They are indicated rather for orientation and optimal interface between components. For example, the amplifier significantly smaller or significantly greater power can derive a column in the maximum positions of the volume control on both amplifiers: on the first - thanks to high level Distortion, on the second - thanks to an abnormal operating mode of the column.

Power can be measured in various ways and in various test conditions. There are generally accepted standards of these measurements. Consider in more detail some of them are most frequently used in the characteristics of products of Western firms:

RMS. (Root Mean Squared - Rivalry value). Power is measured by supplying a sinusoidal signal with a frequency of 1000 Hz to achieve a certain level of nonlinear distortion. Usually in the passport on the product is written as follows: 15 W (RMS). This value suggests that the speaker system when summing up a 15 W signal to it can work for a long time without mechanical damage to dynamic heads. For multimedia acoustics, the power values \u200b\u200bin W (RMS) are overpriced compared to Hi-Fi columns due to measurement at very high harmonic distortions, often up to 10%. With such distortions, listen to sound accompaniment is almost impossible due to strong wheezes and the pride in the dynamic head and the column body.

Pmpo. (Peak Music Power Output - Peak Music Power). In this case, the power is measured by the supply of a short-term sinusoidal signal with a duration of less than 1 second and a frequency below 250 Hz (usually 100 Hz). It does not take into account the level of nonlinear distortion. For example, the power of the column is 500 W (PMPO). This fact suggests that the acoustic system after playing a short-term low frequency signal did not have mechanical damage to the dynamic heads. The people of WT power units (PMPO) are called "Chinese watts" due to the fact that thousands of watts are achieved with such a measurement method. Imagine - active speakers The computer is consumed from an AC power electrical power 10 V * A and develop a peak musical power of 1500 W (PMPO).

Along with Western, Soviet standards for various types of power also exist. They are governed by this day GOST 16122-87 and GOST 23262-88. These standards define concepts such as nominal, maximum noise, maximum sinusoidal, maximum long-term, maximum short-term power. Some of them are indicated in the passport for Soviet (and post-Soviet) equipment. In world practice, these standards are naturally not used, so we will not stop at them.

We draw conclusions: the most important in practice is the value of the power specified in W (RMS) with the values \u200b\u200bof the harmonic coefficient (THD), equal to 1% or less. However, a comparison of products even on this indicator is very approximately and may not have anything to do with reality, because the volume of sound is characterized by sound pressure level. Therefore, informativeness of the indicator "Power of an acoustic system" - zero.

Sensitivity

Sensitivity is one of the parameters specified by the manufacturer in the characteristics of the acoustic systems. The value characterizes the intensity of sound pressure developed by the column at a distance of 1 meter when the signal is supplied with a frequency of 1000 Hz and a capacity of 1 W. The sensitivity in decibels (dB) is measured relative to the hearing threshold (zero sound pressure level is 2 * 10 ^ -5 PA). Sometimes the designation of the characteristic sensitivity level is used (SPL, Sound Pressure Level). At the same time, for brevity in a graph with units of measurements, dB / W * m or dB / W ^ 1/2 * m is specified. It is important to understand that the sensitivity is not a linear ratio of proportionality between the level of sound pressure, the signal power and the distance to the source. Many firms indicate the characteristics of the sensitivity of the dynamic heads, measured under non-standard conditions.

Sensitivity - characteristic, more important in designing your own speakers. If you do not realize to the end, which means this parameter, then when selecting multimedia acoustics for PC, you can not pay special attention to the sensitivity (it is not often indicated).

Ahh (Frequency Responce)

Amplitude-frequency characteristic (ACH) In general, it is a graph showing the difference in the magnitudes of the amplitude of the output and input signals in the entire range of reproducible frequencies. Ahh is measured by supplying an electrical sinusoidal signal of the unchanged amplitude when its frequency changes. And at the point on the chart, where the frequency is 1000 Hz, it is customary to postpone the level 0 dB on the vertical axis. The option is ideal in which the ACH is represented by a straight line, but there simply does not happen in reality in reality in reality. When considering the schedule, you need to pay special attention to the amount of unevenness. The greater the amount of unevenness, the greater the frequency distortion of the voice in the sound.

Western manufacturers prefer the term Fr. (Frequency Response) - the range of reproducible frequencies, which is a "refillament" of information from the frequency: indicate only boundary frequencies and non-uniformity. Suppose it is written: 50 Hz - 16 kHz Ahh (± 3 dB). This means that this speaker system in the range of 50 Hz is 16 kHz, the sound is reliable, and below 50 Hz and above 15 kHz, unevenness increases sharply, the frequency response has the so-called "challenge" (sharp decline characteristics).

What threatens it? Reducing the level of low frequencies implies loss of juits, the saturation of the sound of bass. The rise in the field of the LF causes the feelings of the bubble and the gudeva column. In high frequencies, the sound will be dim, unclear. Rifting RF mean the presence of annoying, unpleasant hissing and whistling pride. The multimedia speakers are the magnitude of the non-uniformity frequency response is usually higher than that of the so-called Hi-Fi acoustics. To all advertising statements by manufacturers on ACH columns of type 20-20000 Hz (theoretical limit of the possibility) must be referred to a fair fraction of skepticism. It often does not indicate the unevenness of Ahh, which can be unthinkable magnitudes.

Since the manufacturers of multimedia acoustics often "forget" indicate the unevenness of the ACH acoustic system, meeting with the characteristic of the column of 20 Hz - 20,000 Hz, it is necessary to keep the Ear East. There is a high probability to buy a thing that does not even provide a more or less uniform characteristic in the frequency band 100 Hz - 10,000 Hz. Compare the same range of reproducible frequencies with different unevenness can not be at all.

Nonlinear distortion, harmonic coefficient (THD)

The THD abbreviation is literally deciphered as total harmonic distortion (Total Harmonic Distortion), but means a completely defined term - the harmonic coefficient. The acoustic system is a complex electro-acoustic device that has nonlinear characteristic Strengthening. Therefore, the signal after the entire sound path at the output will necessarily have nonlinear distortion. Some of the most obvious and most simple in dimension are harmonic distortion.

The columns largely depends on the power of the signal supplied to them. Therefore, it is foolish to make correspondence conclusions or to compare columns only on THD, without resorting to listening to the equipment (although even the most authoritative editions sometimes go to such a light path). In addition, for the working positions of the volume controller (usually 30 ... 50%) The value of THD manufacturers are not specified.

Electrical resistance, impedance (impedans)

The electrodynamic head has a certain constant current resistance, depending on the thickness, length and material of the wire in the coil (such resistance is also called resistive or reactive). When the music signal is filled, which is an alternating current, the head resistance will vary depending on the frequency of the signal.

Impedance (impedans) - this is a complete electrical resistance variable currentmeasured at a frequency of 1000 Hz. Usually impedans acoustic systems are 4, 6 or 8 ohms.

In general, the amount of complete electrical resistance (impedans) of an acoustic system is about anything related to the quality of the sound of a particular product, the buyer will not say. The manufacturer indicates this parameter only to ensure that the resistance is taken into account when connecting the speaker system to the amplifier. If the resistance value of the column is lower than that of the amplifier, nonlinear distortions will be present in the sound; If higher, then the sound will be much quieter than with equal resistance.

Case column, acoustic design

One of the important factors affecting the sound of an acoustic system is acoustic design. When designing acoustic systems, the manufacturer usually encounters a problem in choosing acoustic design. They are already more than a dozen species.

Acoustic design is divided into acoustically unloaded and acoustically loaded. The first implies the design at which the oscillation of the diffuser is limited only to the rigidity of the suspension. In the second, the oscillation of the diffuser is limited in addition to the stiffness of the suspension by the elasticity of air and the acoustic resistance to radiation. Also, acoustic design is divided into single and double systems. The single action system is characterized by the excitation of the sound going to the listener, by means of only one side of the diffuser (the radiation of the other side is neutralized with acoustic design). Double-acting system implies use in the formation of sound of both surfaces of the diffuser.

Imagine a person who is interested in music, but never paid attention to sound quality. And so, having heard about Hi-Fi and High-end-technology, he decides to check in person, what is the "real sound". His money, as a rule, is a bit, and it is a pity to spend, it is not known yet for what. Just for such a person, our shelf speaker test will be very useful, and just in this price range can be found columns capable of demonstrating real Hi-Fi-quality sound. Yes, you will have to make a small discount on the depth of bass. But, on the other hand, shelf acoustics, as a rule, better playing at low volume than the outdoor, and it will be easier to place it in the room. Dozen speakers - a rich selection. I am sure that among them there are very very worthy specimens.

Criteria for evaluation

We are dealing with classic "workshoes", and the approach to testing is quite traditional. Ahh and books will show us how flawlessly the design of the column from a technical point of view is performed. Together with the constructive characteristics of the model, this will assess the design.
Listening will make its own adjustments and will allow you to identify the character of the sound. The good bass depth and at the same time its high quality is rarely combined in the format of the shelves, so we will not approach unnecessarily strictly to this parameter. But the presence of a clean and even upper register with small columns is completely under power. The importance of this parameter is extreme for genuine, natural supply of musical material. High-quality sound at low volume is also important and is an indicator of smooth, almost linear speakers of the AU. The timbral reliability will allow you to enjoy the full beauty of the sound of each individual tool. After all, musical instruments are created in order to enjoy their sound, and not try to understand what exactly plays. All this will be in the assessment of sound. The last estimate is inversely proportional to the price: above the price is less evaluation.

Acoustic Energy 301.

Sound: 4.
Design: 4.
Price: 4.
Advantages:
- High detail
- Temmar reliability
Disadvantages:
- Low air

Working out a series of 300, designers achieved visual minimalism. All small details like screws, grill fasteners are excluded from the appearance. The front wall of the column is finished with a black rubber-like coating that merges in color with diffusers of emitters. The decoration of the speakers is also minimalist - black or white varnish. Model 301 followed in itself a corporate 28-mm tweeter with a motley dome and a traditional, well-recognizable sch / LF speaker with a diffuser of bent, rapidly anodized aluminum with a diameter of 110 mm. This speaker is a distant heritage of the legendary AE1 monitors.

Shelf acoustics Acoustic Energy 301.

It is curious that the company decided to use the slit port of the phase inverter made to the front panel. It was possible to save the size of the column with the convenience of its placement near the wall.

Sound
The absence of how either a noticeable color of the sound allows you to turn around the column and, even playing quite restrained, present musical compositions interesting. The smallest details are well distinguishable, and the timbs are very close to natural. The entire frequency scale is well balanced in terms of level, and on the dynamics - the sound is holistic.

The elevation of the top register is not bad, but it is not enough for open sound with enough air. On complex compositions, the intelligibility of the musical material is reduced. At low volume, the character of the sound almost does not change.

Measurements

Ahh is very smooth. The decline in the NF region is uniform. Middle depth bass. The books are quite low until the lower boundary and practically does not depend on the volume level. Impedance is unstable.

Bowers & Wilkins 685

Sound: 4.

Design: 5.

Price: 5.

Advantages:

- Spacious sound

- Fast bass

Disadvantages:

- A little simplification of timbres

The model represents the younger Bowers & Wilkins line. Possessing a concise modern design, the line nevertheless inherited some technologies from the flagship themselves. Of course, this applies only to inexpensive and effective solutions, such as Nautilus tubes for tweeter, kevlar diffusers and phase inverter ports with a golf ball surface. The tweeter with an aluminum dome is surrounded by a special material that helps achieve the volume of sound. SC / TWT-Speaker uses a static bullet to smooth out the return on the upper boundary of the frequency.

Shelf Acoustics Bowers & Wilkins 685

The crossover model is minimized as much as possible - he is first order. The hull of the speakers is decorated with a film, and the front panel is covered with a pleasant to the touch velvety material.

Sound
The sound of the model is open, light. Detality at a good level. Bass collected, fast. Localization is clear. Impressive dynamic range.

Tool timbres are slightly simplified on average frequencies. In this case, the top register area is very active.

It adds the sound of airiness, space. Models are inherent in increased emotionality, expressiveness.

Measurements

Nice unevenness in the region of 2.5 kHz and 6-7 kHz, which disappear when the column is rotated by 30 °. However, the frequency balance at the same time is slightly shifted in the LF region. Knock is extremely low. Impedance is extremely unstable.

CANTON CHRONO 503.2.

Sound: 4.

Design: 5.

Price: 5.

Advantages:

- pure top register

- Accurate transfer of timbres

Disadvantages:

- bass is weak at low volume

Chrono 503.2 is a real German column: excellent performance quality, 100 percent quality control of each instance, Made in Germany. Despite the declared glossy finish, the column is placed by the film, and only the front panel is made by glossy. The size of the column is not very large, but the speaker managed to place the impressive - 180 mm. Of course, it is equipped with a traditional Canton aluminum diffuser. The suspension is made in the form of a wave for the maximum linear and long piston diffuser. A 25 mm tweeter dome is made of very lung, but a durable aluminum and magnesium alloy. For reliability, it is protected by a metal grid. On the bottom there are two holes with thread for mounting on a rack or bracket.

Shelf acoustics Canton Chrono 503.2

Sound
Music material is presented very carefully. The frequency balance is almost perfect. Tool timbres are transmitted with high reliability, and small parts are not overlooked from the view. Increased emotionality is not observed, but due to a wide and even dynamic range of columns, it is possible to accurately transmit the musical idea of \u200b\u200bthe composition. Bass collected, neat, exactly in its place. However, it is not very deep, and at low volume even more gives his position. At first it seems that high frequencies are too many, but they appear exactly when it really needs, and in the right amount. The top register is very clean, which will certainly appreciate lovers of modern electronic music.

Measurements

The frequency response is smooth, although quite strongly depends on the angle of listening - the orientation of the AU is relatively narrow. KOB is very low, and a good stock at low frequencies is noticeable. Impedance is unstable.

Chario Syntar 516.

Sound: 3.

Design: 4.

Price: 4.

Advantages:

- Emotional feed

- Clear Localization

Disadvantages:

- Simplification of Tembrov

The Italian column is made in the very classic design with a veneer trim. Before drinking the walls of the hidge housing, HDF are frozen on both sides with natural wood. It makes the column more durable. The assembly and further processing of the body are made by experts by hand in Italy. Ready copies are thoroughly tested for compliance with the necessary acoustic parameters. The Silversoft NEODIUM model tweeter uses a special membrane, coated with an aluminum powder, as in the columns of the company's top line. Interestingly, the tweeter is given to the considerable part of the sch-range - starting with 1 kHz. The form of the diffuser sch / LF speaker, twice the curved, the designers were selected specifically taking into account psychoacoustics and during the months of research.

Shelf acoustics Chario Syntar 516

The port of the phase inverter ends with a simple hole cut into the bottom asymmetric. High rubber legs on the bottom of the body allow the port to work quite effectively.

Sound
In the sound of the columns is present, on the one hand, softness, slowness, and on the other - very clear, active top register. The timbral picture is lightly blurred, the smallest details are vualized. And meanwhile, the speakers succeeds quite accurately, emotionally transfer the mood of musical compositions. The bass is pretty deep and a little prevails in a common sound picture. With a good localization of the musical scene, there is not enough clarity, transparency. This is more noticeable on complex compositions. At the low volume, the bass weakens, but the sound remains quite dynamic and emotional.

Measurements

The best ACH is observed at the corner of the audition at 30 °. The unevenness is relatively good, even recession on the LF. Books are good enough to up to the lowest frequencies. Impedance is relatively stable.

Dynaudio DM 2/7

Sound: 5.

Design: 5.

Price: 5.

Advantages:

- Temmar reliability

- pure top register

Disadvantages:

- strictness in filing

The DM line is the initial level of acoustics in terms of the famous Danish company Dynaudio. The column is decorated in a completely recognizable style of this company. Gray front panel is specifically made in thickness to effectively extinguish the case resonances. The hull itself is also carefully shuffled and high qualityly decorated with a traditional veneer. The branded tweeter is equipped with a 28-mm dome from textiles impregnated with special composition. Diffuser MF / LF-Dynamics Stamps from an already well-proven magnesium massylicate polymer. Sound coils drivers are wound on the capiton base with a light aluminum wire. Together with powerful magnetic systems, this allows you to achieve wonderful dynamics and sensitivity.

Shelf acoustics Dynaudio DM 2/7

Particular attention is paid to the maximum impedance linearity to minimize the dependence of the speakers from the amplifier.

Sound
The supply of musical material is limited column, natural. Excellent collected permission makes the sound scene very believable. It is clearly visible to the spatial placement of the tools.

Bass is dense and well decorated. The upper case is clean and rumored. The sound is distinguished by high detail and lack of color. At the low volume, the speakers play as confident as high.

Measurements

Ahh is elongated in a very smooth strip with a barely noticeable breakdown in high frequencies. The direction is wider. Books are low and stable. Impedance is quite stable. Exemplary results.

Magnat Quantum 753.

Sound: 5.

Design: 4.

Price: 4.

Advantages:

- Temmar accuracy

- pure musical scene

Disadvantages:

- A little sparse sound

It is thoroughly a column from the Quantum 750 medium price range of Magnat. The front wall is made by thick (40 mm) to struggle to make dramatically with the chassis resonances. A solid podium with a thickness of 30 mm also emphasizes the rootality of the structure. It is curious that the front panel and the podium are polished to the brilliance, and the rest of the casing is matte. F-MAX Twitter is equipped with a dome from a double textile compound and has an extended working frequency range. Diffuser sch / LF speaker is made of ceramics / aluminum. The sound coil is well ventilated. The design of the basket of aluminum dynamics is optimized for optimal flow of air flow and reducing resonances.

Polish acoustics Magnat Quantum 753

The port of the phase inverter with a large euro is put on the back wall. The crossover is optimized by the phase and amplitude of the signal and is assembled from selected high-quality elements.

Sound
The columns play emotionally, dynamically, quickly. At the same time, the timbres of the tools are perfectly transmitted, and the musical scene is not flashed with outsiders - they are clean and deep. Localization of sound sources is excellent. Detailing is also at a high level.

The level of HF is enough for open sound with airiness presence, and at the same time the upper case is very neat, unobtrusive.

The bass of medium depth, assembled and fast. A little lack of physicity, feed density. At the low volume, the pads of the columns are lost, emotionality comes.

Measurements

The non-uniformity frequency response is minimal, but the frequency imbalance in the direction of the RF is evident. The books changes within 1% and significantly depends on the volume, but obvious resonances are not marked. Good stock of books at low frequencies. Impedance is unstable.

Martin Logan Motion 15

Sound: 4.

Design: 4.

Price: 3.

Advantages:

- Energetic feed

- fast and tight bass

Disadvantages:

- weak on low volume

The columns attract their amazing natural finish and a pretty black steel protective grid. Cover case slightly tilted back. Under the lattice, another surprise is a tape tweeter (sign of the non-sneakers). The front panel of the column is made of aluminum anodized with black. The panel tone is performed and the diffuser of the long-terrestrial sch / LF speaker is also from black anodized aluminum. Emitters are consistent with a crossover with improved topology, assembled on polypropylene capacitors and electrolytes with a low loss coefficient, as well as manually wound inductances.

Polish acoustics Martin Logan Motion 15

The scheme provides thermal and current protection. The port of the phase inverter is removed on the back wall. The hull of the AC is assembled from MDF plates with a thickness of 19 mm.

Sound
The feature of the columns is that they do not like to play in a small and average volume. In this mode of operation from the frequency band, only the sch remain mainly, and the dynamics becomes inexpressive.

With increasing volume, fast elastic bass appears and rather detailed tops. However, the bottom middle still continues to prevail. Feeding musical material Herbal. At the same time, it is necessary to pay tribute, no extraneous ghosts are felt, even on the contrary, there may sometimes disappear, where they would have to be.

The model is inclined to simplify the timbres of the tools. At the same time, a tape tweeter is very well heard, which gives a characteristic gentle color to the average range.

Measurements

Noticeable non-uniformity ACH in the field of HF. Sensitivity decline towards NC rather sharp. The direction is wider. KOB has small lifts in the score area, but nevertheless it remains below 1%. Impedance is relatively stable.

MK Sound LCR 750

Sound: 5.

Design: 5.

Price: 4.

Advantages:

- Focused sound

- good solid resolution

Disadvantages:

- Do not hide the lack of recording

All the acoustic systems of the American company M & K Sound are performed in black without any embellishments. And the main product decoration is the compliance with the highest standards of sound playback. Series 750 - Compact set of speakers for creating a home cinema. And the largest column in the series (not counting the subwoofer) - model 750 LCR. The column is quite unusual, especially within our test. First, closed acoustic design reduces the return of bass. Secondly, the use of at once two sch / low-speed speakers significantly expands the dynamic range of column. Third, rotated by 4.7 ° aside from the listener, the tweeter panel probably increases and / or aligns the dispersion of different frequencies. The tweeter dome is made of silk coated with polymer.

Shelf acoustics MK Sound LCR 750

Diffusers of polypropylene speakers, with mineral filler. We particularly note the phase-focused (phase-focused) crossover, which significantly improves almost all column parameters. On the back wall there are many threaded holes for different options fasteners of ac.

Sound
Great control of musical material. The sound is almost monitor, smooth. All tools as on the palm: they are clearly defined in space, and whenever matter. Nothing extensive interferes with the general musical picture, all the nuances are visible clearly. And since any emotional color is missing, the sound of the AU is not so exciting, like many other models, and completely depends on the most musical composition.

Measurements

The irregularity of the frequency response is insignificant. The best results gives a rotation of 30 °. KOB is very low and towards low frequencies is growing very smoothly, exceeding 5% only at low volume. Impedance is quite stable. Very worthy results.

PSB Imagine B.

Sound: 5.

Design: 5.

Price: 3.

Advantages:

- Natural Tembrov Transfer

- Stone speaker

Disadvantages:

- Limited area RF

The Iraagine ruler of the Canadian company PSB has been offered for several years. During this time, she managed to earn a reward Red Dot for the design and mass of positive feedback from various experts. The column body is a geometric intersection of several elliptic cylinders. All walls - bent. And it creates a feeling of solidity, structural strength. Thoroughly looks like 25 mm tweeter - dome from durable titanium, the coil is cooled with a magnetic fluid, a powerful neodymium magnet. Diffuser MF / CH-dynamics is made of polypropylene with clay-ceramic filler (mineral). The port of the phase inverter is removed from the back. Column qualitatively finished with natural veneer.

Polish acoustics PSB Imagine B

Sound
Sound assembled and well balanced frequencies. Lovely localization and natural timbers make a musical scene almost real, alive. Smooth speaker allows you to play speakers naturally, liberated even at low volume. Chista musical matter. A little limited RF range, due to which the airiness is lost, turning into the chamber.

The columns may miss the smallest details, but at the same time maintain expressiveness, the soundness of the sound. Bass, though not deep, but very well decorated. Very good and medium frequencies are randically saturated and quite correct.

Measurements

Very even response measured along the acoustic axis. The reversal of the columns away from the listener is undesirable - begin to hand over HF. Of the book is stable and low until the bottom frequency border. Impedance is stable.

REGA RS1

Sound: 5.

Design: 4.

Price: 4.

Advantages:

- pure top register

- Wide Dynamic Range

Disadvantages:

- Small sound color

The English company REGA has developed and offers buyers the only series of RS columns. The purpose of their creation is to harmoniously add other sound techniques, also developed in the REGA walls. However, the speakers are available for buyers and separately from this technique. The RS1 model is quite compact and, judging by weight, is going from MDF a small thickness. Despite this, the performance of the speakers is at the height, there is a neat trim with veneer, and strict design. Emitters are designed by REGA engineers and are collected manually within the company itself. 19 mm Twitter is equipped with a back chamber of a special form for better damping of sound waves on the back of the tweeter dome. SC / LF speaker with paper diffuser.

Shelf acoustics Rega RS1

Smooth frequency return speaker makes it easy to integrate it with a tweeter using the simplest crossover with good phase synchronicity. The port of the phase inverter is removed on the back wall.

Sound
The columns transmit the timbres rather accurately, but due to the small color, the musical scene becomes slightly less transparent. Very little lack of the upper case, while it is very clean. Details are present, but slightly veiled. Music material is squeezed, openly

The bass is quite accurate, but sometimes there is a lack of weight. Localization of sound sources is somewhat blurred.

Complex music manages the column somewhat worse - the intelligibility of the sound material is reduced. However, at the low volume speakers play quite convincing.

Measurements

The unevenness of the ACH in the field of the upper middle and the RF form a special character of the sound of the AU. An even more column is played if they are rotated by 30 °. KNG is unstable, but quite low, less than 1%. Impedance is extremely unstable.

Triangle Color Bookshelf.

Sound: 5.

Design: 4.

Price: 5.

Advantages:

- Outdoor Live Sound

- Accurate transfer of timbres

Disadvantages:

- small excess bass

Very cute in the form of a speaker of the French manufacturer Triangle are performed in three colors of varnish - white, black and red. The Color line is highlighted in a bright, cheerful style among all the products of Triangle and occupies the place of the initial level.

The shelf model uses tweeter with a titanium membrane and sch / wtch speaker with a paper diffuser. In general, the speaker is quite interesting, its suspension is wide, corrugated and is based on his cloth. Paper diffuser is covered with a special composition. Dustproof cap is made in the form of a bullet. The design of the crossover uses workers from the top line Magellan. The port of the phase inverter is located on the posterior column wall.

Polish acoustics Triangle Color Bookshelf

Sound
The sound of the model is very live, natural. Determining accuracy is very high. Sound material feed is natural and relaxed.

The speaker is surprisingly exactly repeats a living performance. The bass is deep and perfectly decorated. Sometimes it even seems that it is too much.

Music Matter is very clean and extremely detailed. No nuances elude from the field of view of the columns.

They cope with compositions of any complexity. The sound quality is not lost and at low volume.

Measurements

Obvious Sbalance ACH in the direction of HF. It is treated, as usual, is a turn of 30 °. The books are quite low, although it is tangible above, but remains within 1%. High volume causes a little more distortion in the top bass. Impedance is unstable.

Wharfedale Jade 3.

Sound: 5.

Design: 5.

Price: 4.

Advantages:

- Good detail

- Clear Localization

Disadvantages:

- Slightly weakened the speaker

The British Wharfedale company traditionally does not regret neither forces or materials even on budget line. And the Jade 3 model confirms this once again. In our test it is the biggest and heavy turnoller, and the only 3-way one. The hull with bent walls is a sign of top lines in many other manufacturers, but not Wharfedale. And the shape of the body, and additional bulkheads make the housing as acoustically inertiam as an inert, preventing unwanted sound color. High frequencies take a tweeter with an aluminum dome. At the border of 3 kHz, it replaces the s-speaker with a diffuser from aluminum-cellulose composite. And already in the region of 350 Hz, the initiative intercepts the LF speaker, equipped with a woven diffuser from a mixture of glass fiber coal. The combination of such materials with a wicker structure approaches the diffuser to the perfect piston, excluding the problematic resonance phenomena inherent in metal diffusers.

Shelf Acoustics Wharfedale Jade 3

The speakers work in a closed volume. The column crossover was optimized on the computer for the maximum linearity of the signal phase transfer linear.

Sound
Wharfedale speakers sound traditionally beautiful. All tools are clearly placed spatially. The music scene is clean and spacious.

The bass column is supplied carefully, unlatedly, as if afraid to damage the balance of the overall sound picture. The same can be said about the top register.

Interestingly and reluctantly combines softness of the supply of musical material with excellent sound detail. In addition, the columns play very well and at low volume.

Measurements

Ahh model is smooth, but the leading behavior is peculiar to the RF - a decline and a sharp rise. Bass deep. The books are almost perfectly smooth and extremely low. Very solid reserve at low frequencies. Impedance is quite stable.

conclusions

It should be noted that it becomes less and less interesting to study the results of measuring columns in our test laboratory. Almost all models have shown remarkably smooth response and very low books even in the bass region! This is explained by the fact that almost all companies have adopted computer modeling tools, with which you can get to sound, perhaps, anything that has already proved for us, for example, Boston Acoustics. Even the form of the body no longer plays such a significant role, the main thing is to correctly calculate the elements of damping. Therefore, all models are either good or excellent.

Two models from our test should be noted especially. This is MK Sound LCR 750 and DYNAUDIO DM 2/7. Companies that created them are initially focused on the development of professional acoustics and lead this line even in the youngest rules. The main principle is the maximum accuracy of the transfer of musical material. And no decorations. These two models fully respond to this principle and, in fact, are monitor acoustics of a professional level, with all its advantages and disadvantages. Not to all the listeners can like it in the sound, more precisely - on the neutrality of the sound. This is a product for special connoisseurs and lovers of music or even for a home studio. Both models are worthy of prize sympathies.

Almost already all companies have to-armed computer modeling means, with which you can get to sound, perhaps, anything

If we talk about beautiful and comfortable sound, then many columns of our test successfully coped with this task. Accuracy of the transfer of timbres, accurate localization, a neat bass - all this is inherent with almost all test speakers. The difference is only in the nature of the sound. And then the choice turned out to be rich: in the test you can find and dense, rich sound (PSB Imagine B), and implicitly sophisticated sound (Wharfedale Jade 3), and a tidy material feed (Canton Chrono 503.2), and an open air image (REGA RS1, B & W 685), and even defiantly aggressive pressure (Martin Logan Motion 15). However, I would like to highlight the French speakers Triangle Color Bookshelf. Almost any musical material they turn into a holiday sound. The columns are able not to miss the main idea of \u200b\u200bthe work and at the same time to file the material is very beautiful, alone and dynamically. They are very pleasant and interesting to listen. Model Triangle Color Bookshelf gets the title of test winner.

The staff acoustics of laptops and televisions often do not meet the needs of buyers, so the latter are increasingly thinking about buying an additional speaker system.

The general classification includes 8 types of acoustics, the most extensive of which is the class of front loudspeakers. They form the kernel of the stereo systems and in the case of multichannel connectivity can be used as independent stereo sources.

Already now the market of systems is more than oversaturated and many firms do not hold competition. We picked up the top 20 of the best acoustic systems in five categories, became:

• embeddable;
• concert;
• suspended;
• outdoor;
• shelf.

Best built-in acoustic systems

Small and compact systems for embedding in furniture to save space in the house.

4 SVEN SPS-821

Unbounded classic
Country: China
The average price: 3370 rubles.
Rating (2019): 5.0

For 15 years, the SPS-821 has already confidently retains the status of one of the best non-visible sound systems in the world. Subwoofers and satellites are made of MDF, there are also chain regulators, both low and high frequencies. The total power is 40 W, and this is not a marketing digit, but a real characteristic. It serves for a long time and true to its owners.

From the disadvantages you can select peaks for 85 and 125 Hz, which are treated with an equalizer of the sound card. Perfectly suitable as an inexpensive solution for home or apartment. It can be used as an embedded, as all regulators are deposited on the front panel. 821 The model has become a reincarnation of 820, but with more modern color execution and increased by 20 mm low frequency drive.

3 Polk Audio RC55i

Optimum price
Country: USA (produced in China)
The average price: 18000 rub.
Rating (2019): 4.9

Not the most budget acoustics in our top we can characterize as a "good middle pepper." The lower threshold of frequencies is not the best here - 67 Hz, so the buyer will have to buy a subwoofer or simply not to navigate to low frequencies.

In fairness, we note that sacrificing the characteristics, the manufacturer skillfully cooled with dimensions, since the column itself is very compact. Weight almost 2 kg will allow you to carry it with you and embed it in any wardrobe. The 5.25 inches speaker has a dynamic balance of settings, allowing you to customize full bass. Rubber seals protect from moisture and dust. Another big plus is a long warranty in 5 years.

2 Jamo IW 606

High maximum power indicator (120 W)
Country: Denmark
The average price: 34000 rub.
Rating (2019): 5.0

Danish Jamo company definitely knows a sense in acoustics and has such a model in the arsenal as IW 606. The main viscos is an increased maximum power of 120 W at starting 60. It is worth noting that it is better to use basic frequencies for stable work, since the maximum is quick Wear components. At 60 W, IW 606 reveals all its potential and serves as its owners for a long time.

The only spoon of the tar in the barrel of honey was the lower level of reproducible frequencies. The minimum mark of 65 Hz makes sound lovers to think about buying an additional subwoofer. If desired, you can make a claim and modest design, but will repeat - the appearance in the sound system is not important if you do not collect a studio or custom.

1 klipsch R-3800-W

Best sound quality
Country: USA
The average price: 26000 rubles.
Rating (2019): 5.0

Before you, one of the best acoustic systems in the middle price segment is specifically for those who do not want to save on sound, but also preferent to refrain from overpay. In terms of quality and characteristics, the model corresponds to all the requests of even the most demanding customers. The rated power of 50 W is not a benchmark and the limit of dreams, but the column will perfectly fit into the home theater having a frequency range from 46 to 20,000 Hz. It pleases that the Americans have not become chased over the excess frequency range, which made it possible to reduce the price of the product.

The system copes well with the creation of stereo effects, but experienced buyers in their reviews are recommended to buy a subwoofer for greater clarity of the lower frequencies that are weak. As a supplement, we can celebrate the company's price policy - for several years now the price of the system holds at a mark of 26,000 rubles.

The best concert speakers

The most expensive and powerful systems for concert performances with high characteristics.

4 JBL 305P MK II

The best choice
Country: China
The average price: 15550 rubles.
Rating (2019): 4.9

The updated line of JBL monitors begins with the version of 305p, which will be talked. Included, instructions, cable and stickers on the bottom, as the legs are not provided here. In the new version, the backlight is adjusted and the monitor will not cut the eye. The low-frequency driver reduces the number of distortion and improved linear characteristics.

The main minus is a terrible design. The glossy facial panel easily collects fingerprints and selects in bright light. In fairness, we note that bass here even debug. The amazing detail of the sound picture was achieved due to the quality component base. Superxile bass resonates even at low volume, if you put a speaker next to the wall. If you put such a house, you can immediately notice multiple noises. The model is positioned as a budgetary concert version and occupies a leading position in popularity among buyers.

3 Yamaha S112V.

Verified model
Country: Japan
The average price: 34900 rubles.
Rating (2019): 4.9

The model that reminds the old one with all its species, but high-quality classics. A two-band speaker from the Japanese acoustics manufacturer is used mainly at club parties, since the quality of his sound completely satisfies the midnight hill. To say that they are perfect, alas, it is impossible. The quality of the assembly leaves much to be desired - the case is a mediocre product from a cheap plywood, which requires periodic twisting or complete replacement of fasteners.

When playing sound, small distortions are observed in the middle frequency area, even unprofessional listeners are capable of catching. But the cutting of high frequencies occurs quite delicately - there are inaccuracies in inaccuracies. A good representative of concert acoustics, giving adequate characteristics for its price.

2 yorkville yx15

Optimum price
Country: USA
The average price: 20664 rub.
Rating (2019): 4.9

An interesting concert loudspeaker, providing steadily good sound quality at all levels of the frequency reproducible. Perhaps on the characteristics of this model, a relatively recent period of release is affected, since from the point of view of Yorkville YX15 surpasses the competing model of acoustics from Yamaha. Less than powerful, but much more balanced, it loses sound frequency from 60 to 20,000 Hz, and it makes it much more cleaner of his opponent. It has a built-in overload protection unit, due to which it does not burn and does not fail even subject to inadequate operation. The walls of the body are made of MDF with a thickness of 18 millimeters, and so that when buying has not had to independently screw the mounts. In general, according to the design of Yorkville YX15, it does not leave many of many - and the root, and the low-frequency speaker is "packed" under the grid, which the same Yamaha S112V, alas, is not enough.

1 RCF TTL11A-B

Best Power Indicator (4000 W)
Country: Italy
The average price: 391622 rub.
Rating (2019): 5.0

Top, but not very popular because of its price an acoustic system for concerts. Special Drivers They accumulate all incoming sounds and are converted to transmit all the sound pattern. Additionally, you can control the audio tilt angle, which varies from 0 to 7 degrees in 8 preset profiles. This reduces the Echo effect.

The amplifier has a special network board with the RS-485 communication protocol to control system parameters, more detailed control and profile management. Despite all the listed pluses, the manufacturer left the ability to use this model in a pair with the subwoofer TTS25-A to enhance the low-frequency band. The maximum stated power is 4000 W.

Best Suspended Acoustic Systems

If there is no place on the floor, the built-in systems do not like and you need to create a surround sound field, this category for you.

4 Dali Alteco C-1

Universal monitors
Country: Denmark
Medium price: 18900 rub
Rating (2019): 4.8

The universal and musical suspension system is applicable to stereo, in multichannel mode and in Dolbyatmos. If you remove the "grill", then you can see the front panel, drowning inside the case, which reduces the free space and gives directional sound.

Put it on the top of the floor acoustics and get the effect of Dolbyatmos format, as in the cinema. Having hung it on the wall, the model can be used as a rear or side acoustics in the home theater. In the usual mode, the radiation is directed perpendicular to the plane of the set of speakers, but if you use a special switch, the angle of inclination becomes 25 degrees. Thus, you can adjust the sound stream to the location of the listener.

3 JBL Control 28

Best quality performance
Country: USA
The average price: 26300 rubles.
Rating (2019): 4.9

Very popular front-type suspended column, the quality of execution of which is superior to the lion's share of competing assemblies. First of all, it also affects not the fact of the factory quality, but how long the JBL Control 28 may be in operation. Reliable Case from MDF Contains a low-frequency paper emitter and titanium versions operating at high frequency. With adequate use of such a column, there is enough for more than ten years.

But the sound quality, alas leaves much to be desired. Special distortions reproducing medium and high frequencies does not carry, however, and expect something colorful from this process Do not. JBL Control 28 is designed specifically in order to accompany an exciting television picture with a moderate sound, without transition to peak volume. This is the case when the price is fully ensured by the reliability and quality of execution.

2 Monitor Audio Radius R225

Wide range of reproducible frequencies (55-25000 Hz)
Country: United Kingdom
The average price: 37990 rubles.
Rating (2019): 4.9

The product of the British manufacturer, characterized by a wide frequency range of sound playback. In each individual element of the MONITOR Audio Radius R225 pair speakers, the presence of grace and fine design designer feels. In the hope of standing out on a general background of most competitors, the developers decided to slightly reduce the width parameters and the depth of the model - they are equal to 120 and 105 millimeters, respectively. Despite this, they managed to accommodate almost all top fillingIn order to make a significant competition in the global market.

The main advantage of the speakers is the exterior. Two choices of the consumer are given two options for trimming - natural beech veneer or pink wood with white, black or silver lacquered coating. Considering the foregoing, the cost of the system looks quite fair.

1 Sonus Faber Wall Domus

Best Power Dynamics
Country: Italy
The average price: 42770 rubles.
Rating (2019): 4.9

Suspended columns are very rarely superior to the characteristics of outdoor models, but in terms of the part of the quality are capable of turning above. The Italian company Sonus sought all lovers of good sound with the original pair of acoustic speakers, the use of which forms a very clear sound picture. A fully standard frequency range is supplemented with 150 W rated power and not too high sensitivity (about 88 dB), so the system requires amplifiers of approximately similar power characteristics. Of the pleasant features of Faber Wall Domus, you can select the presence of magnetic protection, protecting the overload speaker. The rest is almost a standard system, the total weight of which is without a small ten kilogram. The total cost can scare the potential buyer, but the funds spent are guaranteed to pay off long years of work and high sound quality.

Best Outdoor Acoustic Systems

Standard floor systems for owners of large living space or lovers perform on the street.

4 SVEN MS-302 \\ 304

Choice of buyers
Country: China
The average price: 3070 rubles.
Rating (2019): 4.7

Externally, this system resembles a mixture of washing machine and music Center. Do not forget that the appearance in acoustics is not the main thing, therefore, from the merits, we will stop at the absolutely brutal subwoofer in the framework of its class. Plus for many will be the output for connecting microSD cards.

Basa in a small scale here more than not bad. Satellites are collected qualitatively, have magnetic shielding, and they sound well. 40 watts at the outlet plus a good volume margin made from MS-302 pets on the market, and on Yandex the product has an honorary status "Choosing buyers". After surcharge 200 rubles, you can take the MS-304 version of the more stylish design and the presence of Bluetooth.

3 Dali Zensor 5

Good price and quality ratio
Country: Denmark
Average price: 39500 rub.
Rating (2019): 4.7

Another representative of Denmark, who has proven himself as a strong middle jack of acoustics market. Despite the release of newer models of the series, Dali Zensor 5 continues to use stable demand for users. There are several reasons for this: first, its balancedness played an important role in popularizing the goods. Standard power and sensitivity indicators (150 W and 88 dB, respectively) are complemented by good high-frequency susceptibility (up to 26,500 Hz).

From the characteristics of the structure, it is necessary to highlight the presence of two speakers responsible for low frequencies, due to the complete effect of the presence of the subwoofer (low-power budgetary saba). But to the disadvantages, some consumers include the weight of the product. How legitimate this remark is unknown, however, it should be noted that some competing systems weigh much more.

2 Canton GLE 476

The most reliable system
Country: Germany
Average price: 54990 rub.
Rating (2019): 4.9

A system that is a kind of promise for all lush sound lovers. This is an amazing combination of the purest, detailed to the smallest particles of sound and good work to ensure the correct acoustic effect. Reproducible frequencies range from 25 to 30,000 Hz, which, in fact, eliminates the need to buy a subwoofer. The rated power of the system is limited by the value of 110 W, with the maximum power that does not cause damage to the speakers is 170 W.

One of the features of the front speakers is the presence, in fact, a three-channel soundproofing system, with a rendered speaker for medium frequencies. But the high-frequency emitter was subjected to a ruthless decrease - its diameter is only 25 millimeters. However, this does not prevent the system to work out peak values \u200b\u200bgently and without distortion.

1 HECO VICTA PRIME 702

Low price
Country: Germany
Average price: 33900 rub
Rating (2019): 5.0

One of the obvious rating leaders on the set of sound cleanliness and reproducible frequencies. One of the lowest prices for the product allowed to acquire a company with a large circle of fans and collect all best characteristics For its segment.

Rated power starts from 170 W, and in the peak reaches 300. The frequency threshold in 25 Hz is not something supernatural, but its maximum indicator is 40,000 Hz, which beyond human perception. The main advantages of the model include a pleasant trim of the body. The full-fledged system is two columns, which is why Prime 702 can be placed in any interior. This option is deservedly considered one of the standards in quality and durability.

Best shelf speakers

Small sound systems for lovers save place in the house.

4 Defender ION S10

Ultrabudget segment
Country: China
The average price: 1206 rubles.
Rating (2019): 3.9

Ultra-budget solution for those who want to acquire an inexpensive acoustic system for home and save money. From the main advantages you can allocate a pleasant design. Deep and soft sounds can safely adjust the equalizer and other software. I am glad and compact, the system can be put on the shelf or the table and enjoy the sound.

For such a low price has to pay. Until the minor low power in 10 W and sound system version 2.1 is capable of playing only for 2 speakers in stereo mode. It leaves much to be desired and the body, since beauty does not affect the strength, but it is not superfluous, as it is made of plastic. If you unscrew the volume to the volume to the maximum, then the speakers will begin wheezing and falling.

3 JBL LSR308.

Best Balance Systems
Country: USA
The average price: 22930 rubles.
Rating (2019): 4.6

Another representative of the American JBL company purchased by users to place regular computer speakers. It is unknown for now why such a large stir formed exactly around this model. It is really complete advantages, but it is often not devastable. For example, some models make permanent background noise on medium and high frequencies, even subject to a good connection and power from an alternative electrical outlet. But at the same time, in terms of power indicators, and by the rest of the key parameters, the column is at a stable competitive level. The cost is not overestimated, adequately corresponds to the declared characteristics, but also does not indulge potential buyers with its modesty.

2 Pioneer S-DJ50X

High quality performance. Select users
Country: Japan
Average price: 10992 rub.
Rating (2019): 4.6

This Pioneer S-DJ50X Phase Inverter Loudspeaker is intended for recruiting multimedia devices, including desktop computers. The successful combination of stereo speakers and the functions of the amplifier is an improvised "paradise" for the present Melomanana. The general gain of low frequencies is 26 W, and high - up to 54 watts. To couple with the rated power of emitters (80 W) and the ability to reproduce sound frequency from 50 to 20,000 Hz, Pioneer S-DJ50X can be a good acquisition on the verge of professional equipment.

The only significant deficiency of the technique is reduced, in fact, to the omission of manufacturers. Scuntful equipment, which includes only the power wire and the system itself, delivers some inconvenience to users, which the lattes could not not mention in responses.

1 Yamaha HS8.

Wide range of reproducible frequencies (38-30000 Hz)
Country: Japan
The average price: 21900 rubles.
Rating (2019): 4.8

As it often happens that the ideal of the technique does not have enough greater inner potential. But Yamaha HS8 is exactly the reverse case. The controversial appearance (not too terrible, but not the most beautiful) is compensated by the original combination of high power (about 120 W) and the frequency range (from 38 to 30,000 Hz), which provides the system with an accurately transferred to the user even the most minor sounding touches, beauty and False of recorded music. The built-in amplifier also gives a significant increase in power: for low frequencies up to 75 W, and for high - no more than 45 watts.

Despite the aforementioned non-zeysh view, the construction of the case is characterized by a high degree of reliability. The box itself is made of MDF, which is why the weight of the system increased to ten kilograms. Of course, the cost from the category "under 20 thousand" is able to scare some buyers, but it is impossible to call this model any expensive.

And so, you decided to buy hi-Fi Acoustics Budget Level for HomeBut here a dilemma appears - or buy what the budget is suitable for you, and you can be content with sound received for this money, or choose something better, but in a more expensive segment. As usual happens in life, good and cheap are rarely combined. In this review, we tried to collect those models that combine these two seemingly not compatible quality. Of course, the final choice can only be done with direct listening, but we highly recommend these models.

Cambridge Audio S30.

The front panel of tweeter is cut out as such, in order to bring two dynamics (high-frequency and low-frequency) for their best integration. The design of speakers allows the use of a simplified crossover between them, and for an even better effect, the dynamics are connected separately by two sets of cables.

The scope of the cabinet (enclosure) is deep enough, the connection block and phase inverter are combined on the rear panel. The columns are designed for use at a distance of at least 8 cm from the wall.

Victorious power and clarity. This is an excellent acoustic system that combines the victorious battle strength and the purity of the sound. Bass do not become cuts, even if the frequency range is lowered to 59 Hz, it is impressive, but not annoying, being rapid and accurate, filling any music with energy, whether it is a heavy rock or classical music.

But especially good S30 on medium and high frequencies, and apparently, it is directly related to the minimum crossover used. The voices are open and clean, and tools - from acoustic to electronic - sound perfectly and when required, powerfully.
These columns on sufficiently heavy racks at a small angle in the direction of the listener, and you will get a well-focused audio salon, with truly good, spatial sound.

The S30 corresponds to the famous Cambridge acoustics formula: it looks great, it sounds perfectly, and offers an intriguing alternative to recognized favorites at its level.

pros
Powerful
Extremely decent bass for such a small speaker system
Beautiful design
Great price

Minuses
Design not everyone will like to taste
The body of considerable depth is not suitable for all users.

Specifications:

Number of strips - 2
Sensitivity: 90 dB
Reproducible frequency range: 55 Hz - 20 kHz
Nominal resistance: 4-8 ohms
Speakers: Twit: 1 x 25 mm (1 ") LF speaker: 1 x 115 mm (4.5") SC / LF speaker
Recommended Maximum Power Amplifier: 100 W
Magnetic shielding: yes
Dimensions (in x w x d): 226 x 160 x 235 mm (including grill)
Weight: 3.75kg.

BOSTON ACOUSTICS A 25

Compact and slightly convex columns Boston Acoustics A 25 are equipped with magnetic removable lattices and made with knowledge of the unusual combination of the newest (black gloss) and traditional materials (vinyl coating made under the skin) - the impression is as if you see your grandmother in Nike sneakers .

The A-25 chip is the 25-millimeter tweeter dome and the mid-rival 13 cm diffuser on the front panel, and the phaseinventor is at the back along with the moving fastening fastening.

The system is completely free and unpretentious in terms of accommodation and can well serve as a suspension acoustics, but in order for it to sound better, a small free space is required and it inevitably leads to a choice in favor of the location on special racks or shelves.

The sound is impressive. With a light, but not excessively zealous, open, but pleasantly focused, A-25 sounds balanced and without excesses. With it, you can appreciate how good the First Aid Kit's song in the song When I Grow Up.

This model has an excellent resolution at the top level, on average it sounds as balanced and confident, and it has enough tonal variations below to compensate for a small shortage of pressure.

Decent thing. The entire frequency range is perfectly integrated, and the Boston sound causes a wonderful feeling - even the most difficult records are pleased with the sound harmony, which is hardly somewhere else can be found at this price.

pros
Volumetric, exciting non-childish sound, with an average resolution

Minuses
Bass are not too convincing
Case from an intricate mixture of materials

Specifications:

Type - Shelf, Passive, Phase Inverter

Complete composition - 2 loudspeakers
Number of strips - 2
Recommended power amplifier - 10-150 W
Sensitivity - 89 dB
Impedance - 8 ohm
Range of reproducible frequencies - 55-25000 Hz (± 3 dB)
The frequency of the crossover is 2.4 kHz

Gold plated connectors - there

RF emitter - 25 mm, dome
NF emitter - 133.3 mm
Removable lattice - eat
Sizes (SHCHG) - 183x271x225 mm
Weight - 4.58 kg
Price - 9 990 rub

Dali Zensor 1.

With high quality of this model and even some pretentiousness of compact, well-made enclosures, Dali acoustic systems quite correspond to their price tag - but the difference between the sound, which they are issued and the numbers on the labels are very significant.

Zensor 1 is equally easy to cope with the storms and onslaught of Kenny West Power songs, and with the delicacy of Flower of the Mountain Kate Bush. Her sound is open and clear.

Amazing attention to detail. Clean, but not sterile sound, immersing in the very core of music, where the sounds merge and split - such a sound quality is usually characteristic of acoustic systems that are an order of magnitude, or even two, higher in price. They manage to combine careful attention to detail with ease of listening, thanks to which the longest audio touch flies as an instant.

Achieve an ideal ratio between the cleanliness and power of the sound is very difficult in any price categorySo confidence with which Zensor 1 balances on this fine face is simply striking.

pros
Quite sufficient height, clarity of sound and drive
Magnificent feeling of ease when listening

Minuses
Nothing significant

Specifications:

Type - Shelf, Passive, Phase Inverter
Acoustic radiation - Monopolar
Number of strips - 2

Sensitivity - 86.5 dB
Maximum sound pressure - 106 dB SPL
Impedance - 6 ohm
Range of reproducible frequencies - 53-26500 Hz (± 3 dB)
The frequency of the crossover is 2.9 kHz
Connector for connecting to power amplifier - screw
Gold plated connectors - there
Type of emitters - dynamic
HF emitter - 25 mm, dome, textiles
NF emitter - 133 mm
Removable lattice - eat
Mounting for mounting - there
Magnetic Protection - Have
Finishing options - Black, Walnut
Sizes (SHCHG) - 162x274x228 mm
Weight - 4.2 kg
Price - 12 790 rub

Mission MX1.

The sound of this model is simply stunning: Mission MX1 columns attack any music with endless enthusiasm, which gives rise to the exciting resonant sound. The key of such sound in synchronicity: James's synthetic rhythms. Blake in The Wilhelm Scream begin and stop with excellent accuracy, and all frequency bands are clearly separated from each other, which creates an inseparable unity of the impression in general.
MX1 sounds better with its removable lattices, reaching the best tonal balance standing closer to the wall, where the ports that go back are bass without causing the roar. But actually she sounds good almost everywhere.
For the sake of fairness it is worth noting that high frequencies, although in general, it is bright and pleasant, it is unlikely to decorate a high-quality record, but this is more than paying for the majority of people with pleasure.

pros
Impressive, clean and powerful sound
Free location scheme
Durable housing

Minuses
Does not hide the flaws record
Preferably avoid atmospheric sounding electronics

Specifications:

Type - Shelf, Passive, Phase Inverter
Acoustic radiation - Monopolar
Number of strips - 2
Recommended power amplifier - 25-100 W
Sensitivity - 86 dB
Impedance - 8 ohm
Range of reproducible frequencies - 58-20000 Hz (+/- 3 dB)
The frequency of the crossover - 3 kHz
Type of emitters - dynamic
RF emitter - 25 mm, dome
LF / sch-emitter - 127 mm
Removable lattice - eat
Finishing Options - Black, Cherry, Red Tree, Walnut
Sizes (SHCHG) - 172x280x258 mm
Weight - 5.1 kg
Price - 8 890 rub

Q acoustics 2010i.

In 'I' version of the new tweeter, an increased midbasy conical emitter and an updated crossover corresponding to the changes made. Twitter is now issued to minimize the possible negative effects of any vibration caused by the Midbasy Speaker.
The case remains unchanged, except for the new neat front panel; Considering that the system looks good, this is not a problem.
Connection is made through a pair of terminals on the bottom, each for a separate cable set.

This system in many respects sounds the same as its more massive variation that has won the 2020 award, and there is nothing surprising in this, given the similar technical characteristics.

They are characterized by the same combination of purified sound and an increased level of sound aggressiveness, and the degree of immersion in the record is the same.
It is not surprising that larger acoustics receives an advantage, however, with such a size and at such a price, it is unlikely that some other model can be filled with the 2010th.

It is more powerful than it could be expected in weight, and will work perfectly with Denon D-M38, but if your budget pulls something like Marantz's 6004, combinations of a CD player with an amplifier, then you will find what in exchange for Caught tools She can give you just a great sound.

It's not so easy to find acoustics that could boast of the same harmonious and clean sound, while thanks to a perfectly thoughtful and improved balance - remaining so unpretentious in terms of connection.

pros
In an improved form, it is even more interesting
Impressive permission
Thoughtful built frequency balance

Minuses
Big 2020 is more tempting if you can afford something in fact

Specifications:

Type - Shelf, Passive, Phase Inverter
Acoustic radiation - Monopolar
Complete composition - 2 loudspeakers
Number of strips - 2
Recommended power amplifier - 15-75 W
Sensitivity - 86 dB
Impedance - 4-6 ohm
Range of reproducible frequencies - 68-22000 Hz
The frequency of the crossover is 2.8 kHz
Type of emitters - dynamic
RF emitter - 25 mm
NF emitter - 100 mm
Removable lattice - eat
Additionally
Sizes (SHCHG) - 150x235x203 mm
Weight - 3.5 kg
Price - 16 340 rub

Tannoy Mercury V1.

The fifth model is definitely one of the best at the moment, thanks to a variety of updates, including a more hard case and a lightweight midbasy diffuser in the form of a cone.

Just listen - and you will make sure how to succumb to charm Tannoy. The sound platform is larger than other existing in this class, and the effects of space and the proximity of this system can be combined better than any other.

The flexibility and strength alloy makes the sound of the tools are delightful juicy, and dynamic transitions are beautiful. You could evaluate it and not find flaws in it, but the comparison with other best of acoustic systems also testifies that it is hardly tannoy to give way to someone in force and energetic.
She has a slightly convex domestic high-frequency emitter, and although it assumes the sharp sound as much as possible, believe me - it is worth it.

pros
Beautiful tone balance
Flexible, well synchronized and dynamic
Filled with details

Minuses
Drive for some competitors will be sick

Specifications:

Type - Shelf, Passive, Phase Inverter
Acoustic radiation - Monopolar
Number of strips - 2
Power - 50 W
Maximum power - 100 W
Recommended power amplifier - 10-70 W
Sensitivity - 86 dB
Impedance - 8 ohm
Range of reproducible frequencies - 45-25000 Hz (-6 dB)
Crossover frequency - 3.2 kHz
Connector for connecting to power amplifier - screw
Gold plated connectors - there
Type of emitters - dynamic
RF emitter - 25 mm
NF emitter - 130 mm
Case Material - MDF
Removable lattice - eat
Magnetic Protection - Have
Finishing options - Maple, Walnut
Sizes (SHCHG) - 170x300x255 mm
Weight - 4.5 kg
Price - 10 800 rub

Wharfedale Diamond 9.1.

The integration of speakers is almost perfect, the mid-frequency kevlar midbasy diffuser is 13 cm and a 25-millimeter textile tweeter, work in unison, creating a wonderful, balanced sound. It is surprisingly clean - although, perhaps, some competitors have an advantage in this part - but the speaker system is completely able to re-open some touching track for the listener, for example, Tomorrow performed by Nina Simon, presenting an impressive number of parts.

The same confidence radiates the Wharfedale acoustic system and when performing a song Take The Skinheads Bowling, which plays alternative rock, Camper Van Beethoven group S. Academic and thoughtful in its concentration and attention to detail, model 9.1 Nevertheless saves all the necessary qualities to force Not only head, but also legs.

From the top (recognizable and solid) and to the bottom (strong and reliable), Diamond shows well even on the most complex material. It can set the pace, easily return when required and independently balance the voices. Exactly.

pros
Elegant design at an affordable price
Transparent, clean and rhythmic sound

Minuses
Low size for such money

Specifications:

Type - Shelf, Passive, Phase Inverter
Acoustic radiation - Monopolar
Complete composition - 2 loudspeakers
Number of strips - 2
Separate connection of LF and HF (BI-Wiring) -
Recommended power amplifier - 20-100 W
Sensitivity - 86 dB
Impedance - 6 ohm
Range of reproducible frequencies - 50-24000 Hz (-6 dB)
The frequency of the crossover is 2.3 kHz
Connector for connecting to power amplifier - screw
Gold plated connectors - there
Type of emitters - dynamic
RF emitter - 25 mm
NF emitter - 125 mm
Removable lattice - eat
Magnetic Protection - Have
Sizes (SHCHG) - 194x296x278 mm
Price - 7 200 rub