Contacts

Brief technical characteristics of the speaker system F & D YF-IIB. Brief specifications of the acoustic system F & D YF-IIB F & D R313: Verified classic

Using the catalog of our online store you get the opportunity to order the F & D columns with delivery in Kiev and Ukraine. Their price will pleasantly surprise you, and the sound quality will be at the highest level. In the model range of the manufacturer there are a large number computer speakerswhich have small size, but allow you to enjoy the sound during games, when watching high-quality films and listening to your favorite musical compositions. A high-quality professional column is quite expensive, so if necessary, we are ready to issue a loan or installments to provide you with the opportunity to pay the purchase price gradually.

Computer columns differ from standard smaller size, as well as compatibility with sound card, special connectors, and insulated magnetic field. If you plan to connect columns to a standard sound card, you can not pay attention to expensive options, because it will not still be perfectly clean sound. If you wish to get a sound close to the ideal, we recommend purchasing an acoustic system together with the Hi-Fi music center. With professional sound playback, computer equipment does not cope. The problem can only be solved by buying an expensive sound card. The acoustic system F & D will provide you with high-quality and loud sound.

Acoustic system F & D

It is worth noting that the columns can be active or passive. The second cost much cheaper, but the fact is that it will be necessary to separately buy an amplifier, while in active it is embedded in the factory. We offer you to buy F & D speakers that justify all attachments, providing the user to listen to high-quality music. Columns need to choose based on how you plan to use them. Will you communicate in Skype or listen to music on the whole coil? It is of great importance, because in the first case, even the most budget options. Another question to which the buyer must answer - whether the effect of presence is needed while watching the film? If so, you will need f d columns 5.1 and better, which will ensure incredible viewing impressions. This means that there will be 4 columns located in various places of the room and subwoofer.

F & D products have always enjoyed quite a high demand for those people who wanted to get a good sound at a democratic price. But Fenda (this is how correctly the name is pronounced) never specialized in outdoor acoustics. And recently, the manufacturer presented a very interesting model called T-60X, which is really a lot of good things to say.

Contents of delivery

Includes a pair of speakers, inter-block cable, 2xrca-mini-jack 3.5 mm cable, 2xrca-2xrca cable, remote control, two AAA batteries, documentation and microphone.

Design

Fenda T-60X did not receive any awards for refined design or any innovation. But with all this, we have very neat and stylish floor columns.

Such a stereo pair will look good in almost any interior.

The acoustics housing is made of MDF, and the front inserts from glossy plastic. The outputs of the phase inverter are also marching plastic.


The left column has the rendered buttons, control elements, as well as the LED display. The latter displays the mode, the song number when playing from memory cards and Flash drives, as well as the FM station, but hours are not displayed on it, which would be very useful.

As for the available brand, the assembly of the columns is simply excellent - nothing creaks, everything is shot down firmly, no glue on the joints. The only thing that gives budget is the buttons that are painfully simple and made from low-cost plastic. A similar situation with the remote control, which has materials and assembly could be better.

Ergonomics, Management

The height of the speakers is not so big as it may seem through the photo - only 80 cm. And personally, I realized that this is the perfect height of the speakers to be used as part of a home multimedia system. Acknowledged Golden Middle. But the weight is rather big - 18.5 kg, which indicates that we are not "desert". F & D T-60X are suitable for a computer if you have a lot of space near the table. But, of course, the ideal scope of use of this model - as part of a home cinema.

Columns are controlled or using a block on the left column, or a remote control. There are no questions to convenience as such, except for one point, with which I personally faced - when installing acoustics, access to the control elements is completely overlapping. But in this case, the console helps.

Functionality, connection

And here it lies the whole secret of the popularity of Fenda T-60X. What kind of popularity is I talking about? And go to the acoustics catalog on hotline.ua and see what a rating of the model. Exactly. And this is no accident, because there really stole a lot of interesting things.

In addition to a varied wired connection (both analog and optical digital), we have Bluetooth 4.0 for listening to music without wires, NFC, uSB port, Cardrider for MP3 / WMA playback, as well as a built-in FM tuner.

There are also two microphone 6.3 mm Jack for karaoke, which will be very by the way at a party. You can adjust the level of echo, thereby achieving such a microphone sound which is required.

Sound

Immediately make a reservation, the sound is good, but with a number of features. For proper installation Speakers and occupying positions in the center The sound is really poured by details, the scene width allows you to hear any tool in space, good average vocal frequencies. It seems to be a bass in its place - it is not too much of him, and it is sufficiently shot down, as for such a class of columns. But with tweeters something is wrong. High really sharp and not everyone will like, especially when you first turn on. This, of course, can be adjusted using an equalizer, but the reference is the following.

I am with great pleasure listened to speakers any music - disturbed, Robin Shulz, Maroon 5, Kasabian, Ed Sheeran, They, Stormzy, Moby and a lot of other. Pop music is most pleasantly played, where mild vocals and electronic arrangement prevails. Also, the sound is changing from the source - the same FiO X5 II gives a much more serious sound on the wire than the iPhone 6S by means of Bluetooth.

Like acoustics for the home cinema F & D T60-X is just perfect. With a high-quality track (preferably original), any moment is transmitted to excellent. Explosions volumetric, voice in dialogues detailed, the musical inserts play beautifully - even you do not notice the raised high frequencies.

A few words about the output power of 100 W. Columns are really loud! Even a smartphone in a pair with acoustics is able to carry a couple of cups from the table and cause an attack of rabies from the neighbors. The signal-to-noise ratio is about 70 dB with 45 dB crossbar.

Site rating

Pros: sound, cost, bluetooth, a large number of connectors for connecting, microphone for karaoke, assembly, versatility, optimal dimensions for outdoor option

Minuses: remote control and control buttons on the left column from not high quality materials, squeaky top

Output: The cost of F & D T-60X is about 5,000 UAH, which is cheap enough for models with similar functionality. Yes, many can scare the brand and associations with bad Chinese speakers, but this is a little different case. We have really good versatile metals for sane money that will satisfy the vast majority of users. But you should not expect an audio sound from such a product. The columns are wonderful both in the home theater under the TV, and as a central musical system for the house, because in fact it is music Center. A huge advantage is the possibility of playing music with almost any sources - from players and smartphones to network players. Among the minuses I want to note only a remote control from low-quality plastic, not the highest quality control buttons on the panel and sharp high frequencies.

Specifications

F & D T-60X Black
4 859 - 7 722 UAH
Compare prices
A type Multimedia acoustics
Installation outdoor
Connection wired, wireless
Number of channels 2.0
Number of bands 2
Power columns, W 110 (2x55)
Subwoofer power, W -
Frequency range, Hz 20-20000
Signal / noise ratio, dB 70
Input resistance, Ohm 4
Sensitivity, dB / W / m there is no data
Amplifier built-in
Phaseinverter in columns
USB USB 2.0 x1.
Ethernet -
Wi-Fi -
DLNa. -
Bluetooth Bluetooth 4.0.
Airplay -
NFC. +
RCA x1
mINI JACK 3.5 MM -
Digital optical x1
Digital coaxial -
Xlr. -
Entry to headphones -
Others microphone X2.
Display LCD.
Remote control wireless
Dock station -
Cartrider SD / MMC / MS
High frequency adjustment -
Low frequency adjustment -
Built-in FM receiver +
Built-in audio player MP3, WMA.
Internet radio -
Food from the network
Autonomy, h (battery volume, mah) -
Corps material MDF.
Finishing material veneer
Dimensions, mm. 910x382x436.
Weight, kg 18,5
Color the black
Equipment basic
Additionally Karaoke with the "Echo" function

It so happened that decorative acoustics rarely becomes close attention in test laboratories of various computer publications. This is due to several factors at once. First, such systems are cheap, so they have a number of typical drawbacks that need to be considered from the point of view of a low price. Secondly, technical solutions of such columns in most cases are not particularly interested. However, if you smoke a little deeper, it becomes clear that by the number of sales, it is such systems that are inexpensive, beautiful and compact. Therefore, today we want to at least partially correct the existing situation, tested three budget sets of class 2.1.

F & D R313: Verified Classic



It is not necessary to talk about the delivery set of such systems, since in most cases it is completely identical to: two satellites, subwoofer, signal cable, instruction. Trifonics R313 In this regard, no exception. So, opening the box, we saw a fairly interesting system made in all classic canons. No designer delights and glamor, but there is an observance of all the basic rules and good quality of manufacture.


Satellites are made in small housings from MDF in the form of a rectangular parallelepiped. To give appearance, at least some highlight edge of the front panel is slightly rounded. The center is a broadband speaker with a paper diffuser and a soft polymer suspension. It is worth noting that the quality of manufacture in this case is very high and from most such Satellite systems F & D R313 is beneficial immediately on a number of parameters. First, they are decorated not by the usual film of black, and PVC material with imitation of the structure of a natural tree. Secondly, the grids made of acoustic fabric are made removable. This allows the use of columns, both with installed grills, and without them. Fact, I must say, for the budget decision is very rare. For the installation of columns on the horizontal surface, four rubber legs are provided, and the wires are fixed inpatient. No connectors are provided, since switching with an amplifier is implemented using spring clamps.

Subwoofer is made in the same style. We only note that the imitation of the natural material is done very successfully, so we could really think that the SAB is made from the wood array. On the front panel there is a small decorative lining of black plastic. Here you can see three main regulators, a LED and the outlet of the phase inverter.


The control of acoustics is thought out well in the best way, since along with the overall volume controller and the high frequency regulator there is a handle to change the volume of the subwoofer. This is important, since each listener will be able to install the frequency balance he liked.


The applied acoustic design is the fourth order bandpass. Such a scheme is characterized by some specific disadvantages, however, it will allow decent sound pressure, which is actually important in the considered price range. Connecting the system is implemented as simple as possible. As we have already noted, the satellites are attached to the spring terminals, and the signal from the computer is fed to a regular RCA stereo input.



Installation of electronics can be called careless, but there are no flavors. The amplifier is built using the three chip TDA2030A, that is, one on the channel. To power, use a transformer with a power of 31 VA.

On practice

The characteristics of this system do not cause special complaints, but they cannot boast of correctness. The subwoofer works from 45 Hz, due to the low adjustment of acoustic design. At the frequency of 60 Hz, a distinct peak is visible. At the place of coordination with satellites there is a small failure. At high frequencies, the microphone fixes a sharp rise, passing in a steep challenge. Having such achk, the columns will play remotely from the original, cold, but bright.


The sound of acoustics is at a fairly confident level, especially considering its price. Satellites play bright and alive. The timbral balance is shifted to colder shades. Despite the use of broadband speakers, the lack of high frequencies does not affect much. Bass, issued by the subwoofer, clear and deep. No artifacts manifest on low and average volume. If you turn the regulator noticeably on the middle, then nonlinear distortion and inkjet noise affect. In general, the picture for the budget sector is quite standard. However, the overall quality level can be assessed as good.

K-Three (Vigoole) E3120: Contrast Music



This kit is sold in a small box with a standard delivery set: In addition to the columns themselves, only the cable is included for connecting to the output of the computer's sound card.


The appearance of this trifonics can be characterized by one calender word - it is contrasting. On the one hand, we see classic buildings and technical solutions, however, the design was clearly worked out well. The black color of the housings is superbly diluted with snow-white plastic inserts. Satellites are completely ordinary. They have a standard form, made from MDF and decorated with black PVC film. On the front panels there are non-removable overlays of acoustic tissue, on the sides of which are spectacular white stripes, and from the bottom of the company's logo. Under grids, you can detect one broadband speaker with a perforated surface and rigid suspension. The magnetic system is completely shielded, and on the metal there is a clear vigoole stamp.


Compared to satellites, the subwoofer looks even more effectively. The front panel is made of plastic, and the entire body is wooden. The design is approximately the same: the main part is black, on the sides of white stripes. In the center of the front panel you can see three regulators and a bright blue LED. The biggest handle serves to change the volume, and the two small adjust the balance of high frequencies and the volume of the low-frequency channel. In the main state, all regulators are highlighted in blue light.


As in the case of F & D R313, a rather rare acoustic design in the form of a band resonator was applied. Small speaker Mounted inside the case on a partition that shares its volume.


The phase inverter port from one camera is removed on the side panel. At the ends, we see expansion designed to reduce the occurrence of inkjet noise.


Rear panel classic. The metal insert serves as the fastening elements for the main connectors, and the cooling radiator of the microcircuit. All electronics are mounted on the same board, the build quality is high enough. Three TDA2030A chips are used to implement the amplifier. Power is powered by a lower transformer with power secondary windings 24a. Therefore, the 2x10 + 16 W power formula looks somewhat exaggerated.

On practice

In this case, the subwoofer works from 50 Hz, which is already good. Its energy is clearly accented at a frequency of 100 Hz. On the one hand, this is not good, but on the other hand, even such a frequency response for the existing acoustic design in budget class is a notable achievement. Inexpensive bandpassas are oriented on high volume, and the presence of at least minimal quality pleases. Ahh has unevenness of about ± 5 dB in the entire band. In general, it is very good, but it is easy to see that the middle is strongly cut. This will help distort the timbral balance. Although, speaking by justice, the picture for the available $ 40 is a wonderful.


The impressions of the sound excellent. First, it is worth noting the power. Despite the fact that in comparison with F & D R313, more modest figures in practice E3120 plays louder, in any case, accurately produces a higher sound pressure without explicit nonlinear distortion. Satellites have a bright colorful sound. They enormously embellish the source signal, but it is difficult to call it disadvantaged. Rather, this is the specificity of the specific set. Subwoofer bass is confident and powerful. Its sound is more whip and less subject to tombing.

EDIFIER X400: adult sound in beautiful guise

Model X400 can rightfully be called the most adult in today's troika. It is easily explained from the point of view of the price. See ourselves, R313 costs about $ 35, E3120 - $ 40, and x400 - $ 55. That is, if EDIFIER and K-Three (Vigoole) still somehow can be compared, then F & D is noticeably cheaper.



In the box you can detect the speakers themselves, signal cable and traditional for EDIFIER set of printed products - instructions, warranty card, product catalog.


The appearance of trifonics is quite attractive, and the quality of execution is simply excellent. Satellites are made in (small) wooden housings decorated with vinyl film under natural material. The coating does not just have a similar drawing, but also repeats the structure of the array fiber. The speaker with a paper diffuser and a dustproof cap in the form of a bullet is in the center. By default, it is closed with a grid of acoustic tissue. It is worth noting that it has a pretty intricate shape, and not done as a conventional rectangle.


By the way, the X400 is the only set of three, which has not only rubber feet for installation on the table, but also special holes for hanging on the wall. This moment It can be considered important, since in fact it is a tangible plus.


Subwoofer is made in the form of a cube. The speaker is fixed on the front panel and is closed by a removable grid of acoustic tissue. Again, the X400 is the only system of three, where the usual acoustic design is used - the phase inverter. Explain it is simple enough. In this case, the speaker clearly has more impressive characteristics, so the manufacturer did not have to use different tricks to obtain high audio pressure. But the bass will be more correct.


The main connectors are concentrated not on the rear panel, but on a small plastic inset on the right end, which allows, if necessary, place a subwoofer close to the wall. The signal is fed to the household connector 3.5 mm, so the signal cable has an unusual configuration: each of its ends is a mini-jack. Satellites are connected to the outputs implemented using two RCAs. Here you can see two regulators to change the overall volume and volume of the subwoofer.


Inside the acoustics is made very high quality. Installation of the electronic board is simply excellent. The electronics itself is also impressive. The amplifier built on three UTC2030 chips2030 is powered by a transformer with a power of a secondary winding of 30 VA with two capacitors of 3,300 μF in the filter. Note that when available parameters, the satellite power is declared at 6 W, and the subwoofer is 12 W. In this case, the figures are honest, and not subject to doubt.

On practice

So let's take a look at the frequency response. The subwoofer works in a 3-200 Hz strip. The uneven characteristics of the low, however, at a frequency of 60 Hz, a pronounced peak is already visible. Satellite coordination is performed great. The satellites themselves work very well, the high frequency is visible, which will make the sound brighter.


Subjective impressions of the sound as a whole are extremely positive. Subwoofer demonstrates confident work and compared to the already considered kits bauxit it is most correctly. Its sound is distinguished by the crime and excellent detailing of low frequencies. By the way, the available peak does not contribute to a large negative, in any case, in our test room. Satellites sound claims do not cause. They play quite loudly, and what is especially important in detail.

I would like to mention that the EDIFIER X400 is the youngest of the range of gameimar acoustics, which also includes well-known X500 and X600 models.

Output

As a result, the results of our today's testing turned out to be quite predictable. According to qualitative indicators, acoustics is located in accordance with the stated price. The cheapest are F & D R313 columns, they cost only $ 35. At the same time, the kit has a classic appearance and provides normal sound quality. It is worth noting that listening this system Yet better at low and average volume.

Acoustics K-Three, namely, under such a trademark, the Vigoole production columns are officially sold in our country, the E3120 looks more modern and catchy, so perfectly suitable for rooms with a bright design in the style of Hi-Tech. For the price of about $ 40 E3120, it gives a fairly confident sound that, with a small difference in price, it is confidently bypassing R313.

EDIFIER X400 is a somewhat different acoustics, since this is already a transitional option between the frank decorative and adult systems. The set is made very high quality, and the sound is the most correct and detailed. However, the price of 400s is somewhat higher - $ 55.

Speakers F & D R313, K-Three (Vigoole) E3120 and EDIFIER X400 provided by ITC-M

To begin with, you just have to say a few words about the manufacturer F & D. The fact is that acustic systems This brand is already familiar to the domestic user. Before several years ago, F & D acoustics were widely sold in our markets, but at one fine moment it was not. The company simply concluded an partnership agreement with the SVEN brand promoted and became its producer. However, from December 1, 2004, the F & D trademark has ceased to cooperate with the SVEN brand and entered the market independently, directly with the entire line of acoustics, including well-known products and new developments. All products of the F & D trademark are manufactured at the FENDA's head company in Shenzhena, a special economic zone of Guangdong Province in Southeast of China.


After analyzing the model rows, you can really see the striking similarity of some Sven and F & D models. However, in contrast to Sven, F & D has much more new models and developments. In this article, we suggest you familiarize yourself with the acoustic system 5.1 of the initial level of YF-IIB. It is designed for use in a bundle with a domestic DVD or CD player and a personal computer.

Brief specifications acoustic systemF.& D.Yf.- IIb.

Power

35 W (RMS) + 5 * 18 W (RMS)

Dynamics

Subwoofer: 5.25 "8

Satellites: 3 "8

Impedance

Subwoofer: 8th

Satellites: 4th

Frequency range

Separation of canals

Signal / noise ratio

Nonlinear distortion

VCD / AUDIO input sensitivity

AC3 / DVD input sensitivity

Dimensions

Subwoofer: 160x320x316 mm

Satellites: 120x116x205 mm

Weight

6.0 kg + 5 * 1.5 kg

The stated characteristics are good, but there is not a word about how they were obtained. Therefore, it should be trusted with caustic, for example, it is not clear at what power nonlinear distortions do not exceed 0.3% and as acoustics without HF speakers can find 20 kHz. So we will try to figure out a little.

Design and appearance

The central link of this acoustic system is already traditionally a subwoofer. The front panel is made of silver plastic. At the top there is a small round display, which displays all current information. A brilliant handle is located just below for the implementation of basic adjustments and navigating the embedded menu. In the lower part, you can see the diffuser of the dynamic head, and on top of it - a small decorative lining of plastic.

The rest of the case is made of MDF thickness of about 1 cm. To increase the rigidity inside the walls, small strips are glued inside the walls. We also managed to detect a small piece of a synthet board that performs the role of a vibration-fixing material, but it is larger for the species, and not to raise the quality level of the system as a whole. Acoustic design - Phazoinjer. Plastic tube withdrawn to the back panel. The inner diameter is 7 cm, the length is 13 cm.

The dynamic head of 5.25 "has a synthetic plastic diffuser and harsh rubber suspension. It is immediately seen that the resonant frequency is high, and, therefore, and low frequencies Will be played bad. DC resistance - 8 ohms. Especially I would like to note the fact that all the dynamics used on magnetic systems have "F & D" labeling, that is, the manufacturer practically does not use third-party components.

The rear panel of the subwoofer is made of metallic material, its main area occupies a massive radiator designed to cool the powerful chips on which the amplifier is built. Here are the main power switch, fuse and a set of input and output connectors of the RCA type.

All satellites, except for the central channel, are completely identical, and then the difference is that the central channel is installed in horizontal position. The enclosures are made of MDF 1 cm thick, the speakers are covered with meshes from a tissue stretched into plastic frames. There is no vibration-fixing material inside. In each satellite, you can find two 8-momic speakers connected in parallel. Diffusers of paper, suspensions are made of foamed polymer material. From behind each column there are spring connectors for switching and reliable metal fasteners so that the speakers can be hung on the wall.

Electronic part, management and functionality

For nutrition, a toroidal transformer is used for quite impressive sizes - the correct sign of the presence of attempts to improve the quality of the system. The rectifier is made according to the standard scheme and has two capacity of 6800 μF in its composition, which is undoubtedly a little for such acoustics.

The terminal amplifiers are realized in the original way. For each satellite, a standard scheme was collected on the TDA2030A chips (5 microcircuits are used), and the SABA amplifier is assembled on two LM1875T chips in the bridge inclusion. Pre-amplifier It was put on a separate fee, its central ring is a simple sound processor PT2323. It is he who allows us to regulate the parameters (strengthening, timbre and so on.) Using the remote control. All connectors are reliably sealed, so the acoustics of YF-IIB is delivered from the problem of slots through which air begins to go out on high volume with the whistle. The self-noise amplifier is small and even with close placement of columns are not annoyed. However, when adjusting the overall volume of the system, using a handle on the front panel, after ¾, all volumes are started to listen to the clicks when the knob is rotated. Such a lack of electronic control is characterized by acoustic entry-level system systems, and if the kit is inexpensive, as a rule, the manufacturer does not inclined to solve this problem. Foreign Summas Also arise from the clicks of the three relays placed on the main board, they are triggered when switching moves and choosing modes.

No less interesting console remote controlwhich is included. He is slightly elongated and strongly narrowed, thanks to which he sits well in his hand. For nutrition, two standard AAA batteries are used. Using the remote control, you can adjust the overall volume of the system, adjust the volume of individual columns, select mode, control the input selector, turn off and turn on the system.

Listening and measuring

With subjective listening, several more interesting facts surfaced. It turned out that the subwoofer is very (!) Is sensitive to the room. Therefore, if you immediately have dissatisfied with it right away, then try to experiment a little with the location in the room. But even with the optimal arrangement, the resulting bass cannot be called very beautiful. High resonant frequency of the speaker, plus surely not correctly selected acoustic design has done their own business. The bass is characterized by stiffness and tomb. The pipe of the phase inverter is large in the area (even too large), and so often a meticulous water whistled on high volume. But this is not easier, as listening to the music demanding to acoustics, the same classics, for example, is still not very pleasant. This set is traditionally suitable for pop music and various kinds of electronic. It so it happened that these directions sounded safely even on non-quality systems. And if you save it even deeper, it becomes clear that YF-IIB is just a representative of the class "Acoustics 5.1 for a movie". After all, in fact, because of many complex moments, such systems (having a separate low-frequency res - subwoofer in their composition) not so long ago reached a qualitative level sufficient for a comfortable listening of music (this, of course, more concerns real Hi-Fi or even Hi -End, but nevertheless). In the films, the artifacts of bass are not heard so much, and the sound scene seems more favorable than in the case of music. You can write games here. Naturally, the lack of speakers of HF and, as a result, the strong challenge of the tops does not succeed. Therefore, the system as a whole sounds pretty dry and flat.


Output

Well, a miracle did not happen, and budget acoustics showed a completely expected result. Such things by definition are not intended for audiophiles, so it should be easier to approach their assessment. This acoustics are perfect for those who want to get a compact speaker system 5.1 for home. And it can be invented by how much applications can be invented, good functionality in YF-IIB at a high level. It can simultaneously serve as acoustics for a computer and small home theaters in the amount of player DVD., and the controlled input selector will make it possible to implement it without difficulty.

Active wooden SVEN / F & D brand acoustics is well known to our regular readers first of all with an excellent price / quality ratio. The discovery of 2001 was the set of active 5.1-acoustics SVEN / F & D IHOO 5.1. It is hard to disagree that with the advent of this model, the firmly established opinion on how high-quality inexpensive active acoustics could have changed. Ihoo 5.1 is primarily the well-sounding two-band columns, the housings of which are made of wood, well-designed subwoofer, a balanced amplifying path, successful use of the QSOUND processor effect. And all this is for a reasonable value (about $ 200).

Some may not agree with the days to argue in the conference, proving that the Soviet Used column is better than all in the world (especially in the presence of a diploma of a radio engineer, time to a long alteration and warehouse of spare parts for full replacement of all internally). But the fact that Ihoo 5.1 sounds very worthy and plugs for the belt many 5.1 kits located in the same price category, remains a fact.

Ihoo 5.1, of course, not ideal, and has disadvantages of both sound and functionality. Including, there is no remote control in it. Later appeared more expensive 5.1-set SVEN 988, where there is a wireless remote control. But at the same time, the price has grown and the price, although all 5 columns were completely the same, and the quality of the front speakers was still inferior to the IHOO 5.1.

Thus, the version with the same columns as IHOO 5.1, but with the remote control and electronic adjustment of all modes of operation, looks quite logical. It is about such a set and will be discussed in the article. It is called F & D YF-IA. We compare the sound of both sets and see what they differ from each other.

Appearance

The kit is supplied in two packaging boxes. In the first of them, there is quite large sizes, a ten-flame subwoofer, in the other - five columns. The total weight of both boxes is about 23 kilograms.

General view of the set F & D YF-IA

It is possible that you can find a set in another color design, we got a set of finishing of silver color with dark blue tissue grids.

The YF-IA kit includes:

  • subwoofer;
  • five columns;
  • remote control;
  • user's manual;
  • wires for connecting columns;
  • rCA stereo wire on RCA stereo.

Speakers

As we talked already at the beginning, all five columns compared to Ihoo remained unchanged. Their sizes are (sh × in × g):

  • frontal - 168 × 220 × 300 mm;
  • central - 400 × 150 × 140 mm;
  • rear - 150 × 150 × 180 mm.

If naked numbers do not give you a complete idea of \u200b\u200bthe size of the speakers, you can see the front and central speakers next to the 17 "LG Flatron monitor.


Front and Center of the F & D YF-IA
Next to the 17 "monitor and keyboard

The acoustic design of all five columns is a diagram with a phase inverter. Holes of phase inverters are removed on the rear panel. The thickness of all walls of the center and front speakers is 15 mm, rear - 10 mm. All nodes and connections are neat and tightly tight. Inside the case, no sound brake is observed. The mid-frequency dynamic heads in central and rear speakers are the same, with a capacity of 15 W. The diameter of paper diffusers is 10 cm, the flexible suspension is made of polypropylene. On front speakers are used slightly more powerful broadband speakers - 20 W. The diameter of paper diffusers is 11.5 cm, the flexible suspension here is already made of soft rubber. Twitters used in the center and front are completely the same. Their diffusers, with a diameter of 25 millimeters, are made of plastic and closed with a phase evaporation cap. Connecting speakers in the central and frontal columns parallel, and an electrolytic capacitor with a capacity of 2.2 m F is used as a separation filter.


View of the set F & D YF-IA with removed safety nets

Since the dynamic heads have magnetic shielding, no filing when working closely with the monitor was not detected. The central and front speakers have rubber legs with a corrugated surface. Due to this, the center is very confidently kept on the monitor painter. The rear satellites do not have legs, but are equipped with fasteners for installation on the wall.

Subwoofer

The cavifer of the test model exceeds the dimensions of the subwoofer from Ihoo 5.1, slightly higher to the height and one and a half times to the depth. The exact dimensions are 210 × 436 × 442 mm. For a better presentation, we give a comparative photo of the subwoofers of both models.


Subwoofer from a set F & D YF-IA (left)
against the subwoofer from the IHoo 5.1 set (right)

But actually rejoice in such a sized subwoofer is too early. Inside the sub-sab is horizontally divided into two non-interconnected cameras of approximately the same sizes. To generate low frequencies in the subwoofer, only the upper chamber is assigned to YF-IA. On the one hand, the volume under the formation of low frequencies is less, on the other, it should not rattle and resonate inside.

At the bottom of the subwoofer housing is an amplifying fee and a sufficiently large size of a toroidal transformer.


Electronic Sabwofer Filling F & D YF-IA

As can be seen from the photo, the board contains a large number of high-capacity capacitors in the power filter, which ensures the absence of an AC background for power than some sets sin.

Sabe acoustic design is a diagram with a phase inverter. The thickness of all the walls of the subwoofer is 18 mm. The phase reserved hole is displayed on the front panel. The low-frequency head diffuser is displayed on the rear panel and is loaded with an acoustic screen, thereby the NC-speaker theoretically works in a larger frequency range than with a resonant chamber, but the efficiency in the lowest frequency area drops. The low-frequency dynamic head has a power of 50 W and an impedance of 6 ohms. Flexible suspension is made of rubber, and the diameter of the diffuser is 16 cm.

Based on the rear panel of the subwoofer low frequency speaker,
loaded acoustic screen

The subwoofer itself is installed on four two-perhateable legs made of dense rubber.

The following buttons are located on the front control panel:

  • Power - translates the system to power saving mode (Stand By);
  • Vol.Up / vol.Down. - carries out volume adjustment;
  • Mode. - switches the modes of operation of the system (AC3, STEREO, SURROUND);
  • Input - switches the switching modes (DVD, CD / VCD, TAPE, TV);
  • S.BASS. - adds low frequencies to five channels;
  • Mute. - In explanation does not need.


F & D YF-IA Subwoofer Control Panel

The volume level here is defined in dB. The most silent value corresponds to -79 dB, loud - 0 dB. Adjusting the volume separately the front, rear, center and saba is possible only from the remote control. The presence of a three-track equalizer (Treble, Middle, Bass) was also curious, the adjustment of which is also carried out only from the remote control. The S.BASS button is likely to add low frequencies to the sound, but instead, medium and distortions are added to the column, which deteriorate greatly. We would not recommend using this approach.

On the rear panel are:

  • four connectors (RCA) to connect to stereo sources;
  • inputs (RCA) for six-channel connection;
  • mechanical clamps for connecting columns;
  • power switch;
  • fuse.


F & D YF-IA Switch Control Panel

Remote control

The remote control is made in the style of "super-slim". It has a rectangular shape and sixmillimeter thickness. Power is carried out from one large three-told "tablet".


Remote Control F & D YF-IA

The weight of the console is very small and, as can be seen from the photo, it is quite convenient in circulation. With the console are all adjustments that are possible from the front panel of the subwoofer. And two buttons SPK- and EQ-COOSE. - It is not different as the volume adjustment separately four channels and an equalizer.

Amplifying part

In the reinforcement path, the manufacturer uses two types of chips. This is five TDA2030A chips from and two LM1875T chips from. All seven chips are missed thermal stroke and pressed to the metal plate radiator (which we had to remove to demonstrate the marking of the chip).


F & D YF-IA Reinforcement Circuits Chips

Let's look at the dependence of the power distortion taken from the specifications.


Schedule of the dependence THD from the power of the TDA2030A chip

The TDA2030A chip in the amplifying path is used to enhance signals for five channels. It is often found in active acoustics and has proven well as high power rates with a low distortion value.

Measuring the voltage at the corresponding conclusions of the chip, we obtained ± 18 V. This suggests that the graph can be considered without adjusting values \u200b\u200balong the power axis.

Power supply is carried out from one large toroidal transformer, removed from the amplifying fee for a sufficient distance.


Schedule of the THD dependence on the power of the LM1875T microcircuit

Two LM1875T chips serve to enhance the signal to the subwoofer. Given the fact that the amplification scheme of the pavement, with a low value of THD power of the microcircuit, is enough with a large margin.

Comparing the amplifier parts of YF-IA and IHOO 5.1, it should be noted that the chip brands used in the amplifier path have not changed completely. To form a 5.1-sound when connected stereo sources, the sound is still used analog effect processor QS7785 from QSOUND. The use of QS7785 can be described as a very successful solution. On sound quality it is one of best decisions to date.

Subjective audition

With rumor testing, the music signal was played by Waveterminal 2496 and Live cards! 5.1. The first is used as a reference, and the second - due to its six-centality and widespread. I must say that if on many sets multimedia acoustics The difference in the cards of cards is almost elusive, then on YF-Ia she felt quite good. Thus, the set makes sense to connect sufficiently high-quality sources of the signal.

The sound of the kit can be described as very good. You can safely talk about a good set of set. It happens that when using a kit of acoustics with small plastic columns and a large pouring subwoofer, a separate sound of speakers and a subwoofer is heard. Here, the subwoofer does not play separately, and, no matter how complements the sound of the lower register, merging with the sound of the remaining columns, while not focusing on yourself. There are no additional resonances in the sound of the subwoofer.

Decides only incomprehensible origin short-term quiet dyeing (perhaps the defect of the test instance).

The optimal location of the subwoofer will be such in which the phase inverter is directed directly to the listener. In this case, the sound of the subwoofer becomes more intended and distinct, so it is easy to hear and you can accurately determine the height of the notes performed in the bass parties. Of course, when visiting explosions and screens in films or games, it does not play a big role.

I would like to mention a fairly calm and not a skiing character of the sound of the speakers. Even with prolonged listening to music, there is no fatigue than sick some of the speakers. The timbre of sound does not change even at high volume levels. Front columns, being from each other at a distance of 1.5 meters, create a very good stereopanora. If you move them closer (perhaps, some will have to do so due to the size of the table), the uniformity of the sound field is worsening. But this does not mean at all that together with this worsen the quality of the sound. Just for a comfortable listening to music in stereo mode It is preferable not to position the columns too close to each other.

Perhaps the only minus column will be a shortage of transparent high frequencies and a small quantity at the top of the average frequencies. The Ecalizer built into YF-IA does not change anything radically, and when adjusting is trying only adds distortion into the sound.

And now, probably, the most interesting and exciting for all readers and the owners of Ihoo 5.1 is a full-time bet! Comparison of the sound of both kits was carried out according to such a scheme: the same test compositions on two computers were listened, with the alternate disconnection of the audio (with a predetermined volume level). For more accurate comparison, the music signal was removed from professional maps with AKM AK4524 (Waveterminal 2496 and Hointech DSP24 Value).

The results are as follows. As expected, there was no change in the speakers themselves. Actually, it was nowhere to take it: amplifier chips are the same, hulls and dynamic heads - too.

But in the sound of the subwoofers there are some differences. First, at Saba Ihoo 5.1, the volume with equal positions of the regulators is much higher than that of YF-IA. This is due to different acoustic design schemes: a loaded dynamic head and a phase inverter in YF-Ia and a resonant camera in Ihoo 5.1. And as you know, the resonant camera has a much larger efficiency, although inferior in latitude frequency range And the linearity of the frequency response remaining solutions.

As for the timbre of sound, then in our view of Sab Ihoo 5.1 plays a little softer and more fully announces the lowest register, although it does not endure too large volume levels - distortion occurs. Another important point: the sound of the subwoofer Ihoo 5.1 is less susceptible to the location relative to the listener.

Summarize comparative testing Sounds of subwoofers. With a very small advantage, we give the subjective preference to IHoo 5.1 Sabu. The subwoofer YF-Ia plays quite well, but somewhat deceives expectations because of their promising huge dimensions. However, in general, the differences are not so significant.

I would like to add one substantial plus to the dignity of the YF-IA. When you turn on the set in columns and the subwoofer there is no characteristic click from transient processes occurring in the power supply and amplifiers. The fact is that when the kit goes from Stand BU mode to the operating mode, the switching relay is triggered. The same thing happens and when turned off. Thus, it is possible to completely avoid all these unpleasant clicks and cracklers than IHOO 5.1 sinned.

However, in this particular copy, there was a small problem: at the beginning of work, for half a minute from Saba, some kind of short noises and wheezing came.

Measurements acch

Measurements were carried out according to a single technique of the program.


Ach Frontal Column IHOO 5.1 compared with F & D YF-IA

The failure in the region of 2-5 kHz is bad, but not deadly. At least, there are no strong distortions of the tone in the sound, only light color. But there is a fairly smooth (± 3 dB) of the middle and top. Differences between speakers across the frequency response - virtually no. On the hearing the difference also lies on the verge of feeling.


Ach Sabwofofer Ihoo 5.1


SCH Sabwofer F & D YF-IA

According to the results of measurements of subwoofers, F & D YF-Ia leads, which has shown a larger range of reproducible frequencies. However, the subwoofer IHOO 5.1, it seemed a little more pleasant to us, as it plays with greater return and cleaner. There is no contradiction here. Just ahh is not the only and sufficient criterion for which you can fully judge the quality of the sound of acoustics. In addition, there are very few frequencies in music from 20 to 50 Hz. This range is more relevant to voicing explosions in DVD films, where the timbral color and the number of distortion is not so important. The main thing is that the viewer on the chair threw. :)

Output

The set of active 5.1-acoustics F & D YF-IA is an ideal solution as an inexpensive home theater based on a PC equipped with a DVD drive and a 6-channel audio card (or an inexpensive DVD player with a built-in decoder). YF-Ia is an improved option of a folk pet - IHOO 5.1 set. However, the owners of the latter may not be upset. The sound of special changes did not happen, rather just increased the convenience of circulation - the remote control, electronic adjustment modes, no clicks when turning on / off.

If we talk about sound, the test kit is very easily and successfully copes with various musical compositions. Along with dance and pop music, jazz and even the works performed by the Symphony Orchestra are well reproduced. For games, it is also a great solution. The volume of volume with more than enough to voice not only a computer corner, but also the room.

Be sure to say that everything comes in comparison, and each thing costs its price. Given the large number of different inexpensive multimedia 5.1-kits from other manufacturers (and choose from anything), F & D YF-IA is interesting primarily to users seeking sound solution, Optimal in terms of price / quality criteria.

Pros:

  • it happened: Ihoo acquired a remote control!
  • wooden two-band full-range frontal columns;
  • large central column of classic design;
  • big wooden subwoofer;
  • very good sound;
  • qSOUND processor effect for listening to stereo sound on all six columns;
  • lack of clicks when turned on
  • reasonable cost is expected (within $ 300).

Minuses:

  • rear speakers are deprived of the sakes;
  • it is possible that the lack of cords for connecting to a computer;
  • simple noise and wheezing in the work of the subwoofer in a particular copy.


Did you like the article? Share it