How to connect car columns to the music center. Can I connect columns from the center to the computer? Instructions for connecting

Many users wonder how to connect music Center to a computer. This is due to the fact that the acoustic system itself is practically no value today. After all, for listening to songs on the center you must use disk or flash drive. The computer connected to the Internet allows you to listen to any music, as well as watch movies. The music apparatus in this scheme will become an excellent conductor for sounds.

Interestingly, with the help of the center you can enjoy a full-fledged radio, without using headphones. And the dynamics of the musical instrument most of them are much better than many columns.

Connecting a music center to a computer worth starting from buying a cord. This wire is called people tulipSince it has a similar branching with a flower:

It is used to transmit sound from one source to another. You can buy it in the electronics store or radios.
For purchase network cable You need to know the brand and model of their devices (both the computer and the music center), since different techniques require different plugs in diameter.
Do not listen to those who advise you to connect columns from the music center to the computer directly. So you can close the entire wiring and damage not only the columns, but also the PC itself.

Choosing a cord in the store, make sure that it has a normal length. Recall, at what distance from the computer is your acoustic monster, and count what kind of cable Method you need.

Instructions for connecting

Please note that such a wire can be connected to the music center as a laptop and a stationary computer. And there, and there must be used special plugWho is called "Jack":

So, after dealt with the purchase of the wire, gently take it out of the packaging and straighten. Working with a twisted cord is completely uncomfortable.
Now one end of the cable is inserted into the connector at the music center. Depending on the manufacturer, the input can be located in different places. Carefully inspect the device to find it.
The second end of the cord we join the computer. This plug will have a standard size, so you can easily figure out.
To connect the acoustic machine with a computer, on the rear panel system Block It is necessary to find an entrance for headphones. It is in it that our "Jack" is inserted. After you insert the cable into the socket, the system will automatically turn off.
After that you need to configure the music center. To start the sound to play through it, the "AUX" item in the settings should be selected. The same option is used to transmit sound when the device is connected to the TV. AUX mode allows you to redirect sound from one device to another.

Another point about which it is worth knowing is that when buying a tulip, you will offer models with golden spraying. It is believed that they better pass the sound. This is true, just causing such a difference at home almost impossible. To do this, you will have to connect the cord to professional instrument.

Creating a tulip with your own hands

Adapters for connecting one technique to another completely inexpensive. But there are situations when you do not want to go to the store or you just love to mess with electronics. In this case, you can make a cable for connecting a computer and a music center yourself. To do this, do the following manipulations:

Take a regular wire from headphones with a standard plug and remove the isolation from it.
After that, it is necessary to twist the copper wires in the tight harness.
Now we take one end of the wire to the audio entrance. Of course, it is best to solder the details.
Next, contacts on the center and other end of the wire are connected.
After that, we connect the metal and plastic parts using the tape.
Such a cord can be connected not only to the computer, but also to the phone or tablet.

Of course, such a system is imperfect and for its implementation will need a lot of material, which is difficult to find in the house of an ordinary person. Therefore, it is easier to buy a cable.

When using a cord from headphones, armed with a lighter and fall the ends of the wire. So you remove the isolation and get rid of unnecessary hairs that will interfere with operation.

Conclusion

Use the music center as columns to the computer is very reasonable and practical. First, the columns of the device are much better transmitted than most computer, secondly, in this case, your center will not dust on the shelf. After all, with the advent of the Internet, listening to music on disks was not practical.

The music center is an excellent means of playing audio, however, its use on purpose today is not particularly relevant. You can correct this situation by connecting the available speaker system to the computer.

Connection acoustic system The computer is not much different from a similar process with respect to home theater or subwoofer. In addition, all the action written in the course will allow you to connect the music center not only to PC, but also other devices, such as the phone or laptop.

Step 1: Preparation

In order to combine the computer and the music center, you will need a cable. "3.5 mm Jack - RCA X2"To buy which you can practically in any electronics store. Also, the right wire is often complete with an acoustic system.

Note: When using a cable with three and more plugs, the sound will be worse than the norm.

Sometimes the standard cable can be equipped with three and more RCA-plugs, instead of two. In this case, it is better to acquire the above-mentioned cord or redo the existing one.

In case of self-installation the required cable You can take advantage of special plugs, the connection of which does not require the spike of contacts. This can be done with the help of a soldering iron, but then do not forget to isolate and check the contacts to the closure.

Step 2: Connection

When the necessary components are ready, you can proceed directly to the computers with the music center. Note that some actions may differ from the instructions described by us during the instructions, as each device is unique in its own way.

When connecting an acoustic system and computer, you must adhere to security rules. And although incorrect actions do not pose a physical threat, due to this sound card or music center may suffer.

Step 3: Check

After completing the connection of the music center, check the performance of the connection. You can simply turn on the music on the computer. For these purposes, use one of music players or special sites on the Internet.

It seems that musical centers are already finally lived by their age. But to send high-quality and pretty expensive technique on the garbage sorry. Therefore, we will try to find it alternative use.

Is it possible to connect speakers from the music center to a computer?

Can I connect speakers from the music center to a computer? Of course, yes. If the musical aggregate itself is still alive, it will not be much difficult. We will need only one cable that looks like this:

On the one hand, the cable hangs the usual minijack by 3.5 mm, and the other is crowned with two tulips. By the way, you can make such a cableIf your hands know how to keep a soldering iron. To do this, you will need a cable itself (the cord is perfect for stereo handphones) and plugs that can be bought at any store radio components or on the market. Cheap, and angry.

The cable must be connected to the AUX connector on the back of the music center. These are two identical holes of red and white. For clarity - here:

The second end of the wire pretty to the output for columns In your PC (in a round hole with a green rim). And almost everything on it. Next, you need to turn on the music center and select AUX mode on it. For each individual center, this setting is different, so look for instructions or try to apply the "Scientific Pick" method.

Now you know how to connect speakers from the music center to a laptop or a stationary computer, in the presence of the center itself. And what if the center is dead?

Connect speakers from the center without center?

Everything is more complicated here. The fact is that the musical center has an amplifier from which columns eat. Power sound card The computer does not have enough to dig. Therefore, the question is how to connect speakers from the music center to a computer without a center, not so simple as I would like.

We have to look for an amplifier or make it yourself. It can be both a separate device and a board of old speakers. The main thing is that the power of the amplifier does not exceed the power of the speakers.

Swing an amplifier on your own - too not the most difficult task. Internet Chisit ready schemes Any complexity, and the necessary details, as a rule, are easy to find on sale. And if you have a computer acoustics at home, in which for some reason a couple of speakers do not work, specify their power and work voltage And compare with the columns of the music. Center (their characteristics can be found in the instructions or on the rear wall of the center). Suitable - you can connect.

As you can see, the old musical center can become a good computer acoustics. Dare!

Answers:

Dimon-:
Not directly, but through the amp, it is possible, as it is to use the center itself (there is usually there aUX entry - There you need to give a signal from a green connector on sound) or buy / collect amp.

Booster:
Only through an additional amplifier (yes through the same center).

Niko:
Only if they have the same resistance. And it is unlikely. But even if it is so - the sound will not be the same powerful. It is better to enter the speakers from the computer directly to the music center (use it as an amplifier), and then listen to the sound through the normal music center.

Leo:
Better connect the center itself with the computer.

TU-154:
Through the amplifier - you can and need. Directly - it is possible, but it is meaningless, so the output power of the sound card is not enough for their work.

Andrei Fedorovich:
You can, but it is better to connect through the amplifier.

Darkart:
You can not but need! Especially if the center with the subwoofer :).

Lech-Yandex:
Depends? Vene of the center itself or the amplifier will not pull the sound. Personally, I have 2 50W speakers from the player of Yugoslav production, but they are active.

Shamann:
Directly - in no case! Give the sound! And through the center - please, in some even USB sweat for this purpose.

Alekssh76:
It is possible, but without an amplifier, it is unlikely that it turns out.

Shurovik:
Directly - no. Only through the amp.

Mike:
If you are a radio engineer, then at least to the teapot.

SSIFL:
Directly - no. Every center has linear input. Here you can connect the computer.

Zvyaginsev Pavel:
You can, only sleep the sound, not in vain the computer columns are still included in the network, there is also an amplifier.

Andrew:
Speakers cannot be connected separately from the "Center". To the computer you need to connect the music center along with the speakers.

Krugovoy, Alex:
You can, through the amplifier.

Ilyukha:
Speak to them mini Jack.

NEOS81:
You can but through the amplifier, and then the sound card is diligent. Buy a cord on one side of the tulip and on the other on both on the headphones sticky and that's it.

Agro:
Can. You take (do, buy) Lace: at one end of the minijack, on the second two tulips (or that you have at the entrance of the center). Minijacks in Line Out sounds, tulips in the Line in the center and all. IMHO: If the center is normal, not cheap for 100 rubles. And the sound is suitable, then the sound will be high-quality (generally computer columns do not go to any comparison with good from the center). At the very much done.

Konstantin Mikhailovich:
And the central speakers differ from computer, eh? Especially if you have a good sound ...

Mik:
It is necessary if you do not have SOLO2 or MERCURY50. To Audigy2 Value Hi-Fi set.

Vgreen:
Watching what sound. On almost all modern chain can only be active columns, But on the old one. In short, to stop useless disputes - I have on ESS SOLO-1 (it seems so) hanging the AC25 Soviet, the third year. Esno there are no super-duplicate bells on the old sound card, but it works without an amplifier, although it's hot :) And you probably have in general integrated, since this problem arose, because only through the center will come.

This is a question from the archive. Adding answers is disabled.

In recent years, the assortment of both professional and amateur acoustic systems has grown significantly. Today you can make quality sound system Of the two simple columns connected to the integrated sound card of a personal computer, analog columns and active subwoofer, multichannel digital system attached to computer, home cinema, regular TV.

The choice is practically impaired, and any of the options will ensure that it is quite high-quality sound. Accordingly, choose the sound source for its columns is only from convenience. If there is a computer with a good sound card - connect to it, otherwise - to the TV. One of best choices Of course, the musical center, which is a full and balanced acoustic system.

A music center is usually from a sound source that can be played by audio recordings with almost any media - from magnetic cassettes to memory cards, high-quality powerful columns and an active subwoofer. So that everything worked correctly, the speakers need to be connected to the sound source. How to collect all the components in a single whole?

Features of the music center

Many believe that now when in every house there is personal Computer or a laptop, or even one, the need for a few archaic device, like a music center, disappeared. Now such equipment is perceived approximately as a recorder player - something that is necessary only to true museum connoisseurs, which are concerned with some subtle sound parameters, not necessary lovers. But is it?

It is worth noting that music centers are very different from each other with their characteristics, and choose one of them on the basis of what this device will be used most often. For everyday listening, a quiet music will suit one option, for dispensing parties - another, more powerful. If you plan to connect the music center to the home cinema through the AV receiver, you will need a third version of the equipment. How not to be mistaken with the choice so that after connecting the columns it turned out, that the result does not justify expectations?

Focus, first of all, you need to scale the system and its type. In size, you can most often determine the operating power of the device - and the maximum volume depends on the power. There is no need to connect huge speakers with speakers with a plate size to the music center, if the size of the room is very modest - in this case, the acoustic system simply will not reveal all its potential, and it will cost it unjustifiably expensive.

The second, to which you need to pay attention is the type of music center, on which the set of function functions depends. Types of only three:

Micro-monoblock music center whose columns do not require connection, as they are built into the sound source design. A set of functions of such a device is extremely modest - usually a micro center can boast that the playback of CD and radio. Its power is small, comparable to a good radio.
Mini is a larger option, the columns of which can be separated from the sound source, which in turn has a more complete functionality. It may even be played music from the built-in drive. In addition, on the device panel, it is often possible to find a display that issues information about tracking tracks and showing the settings of the graphic equalizer. In general, the spectrum of mini music centers is the most wide - it includes both amateur and semi-professional models. Accordingly, the options for connecting columns can be found different here.
Midi is the most powerful, largest and most full-fledged version of the music center. Separate here not only the columns - even the sound source itself is divided into separate blocks, each of which is responsible for a specific function. The device can play music not only from disks, cassettes and flash drives, but sometimes even from the plates. The connection of the speakers with the sound source here is the most complex and carried out by professional acoustic cables.

Like sizes, the type of device must be selected for the size of the room. Micro is an excellent choice for listening to music in the apartment, Midi is more suitable for events in large halls and with a large audience, since the power of such devices is very high.

Features of the columns of the music center

Depending on the type of acoustic system, a different number of columns can be connected to the sound source in the music center. In the most simple embodiments Two speakers, and they are embedded in the device body. In this case, the operation of the system is very simple - the equipment you only need to stick into the outlet, after which you can immediately begin listening to music. Additionally, anything does not have to connect.

In more complex, expensive and powerful models Musical centers column separate, and their quantity can be different. Each column, in turn, can be equipped with a different amount of emitters - speakers. Their quantity is usually varied from one to three. If the speaker is one, then it is responsible for playing all audio frequencies. If there is a separate speaker of a small size, high frequencies are displayed separately. Some models are additionally separated by low frequencies for which a larger speaker is used. Such separation provides better sound clarity.

The easiest version of the speakers is a stereo pager. It represents two frontal dynamics equipped with each single speaker. Each column is responsible for its channel - left and right. They are responsible for playing the entire range of sound frequencies (from 20 to 44,000 Hz), which is impossible to do without distortion, so the sound quality in simple music centers is reduced. In more complex models, the sound is divided into frequency zones, each of which reproduces a separate speaker.

To play yourself low frequencies A single column is used - subwoofer. It is equipped with a very large speaker - the quality of sound depends on its diameter. An even stronger to improve the sound helps the phase inverter - a cylindrical tube in the housing of the low-frequency column.

The number of speakers is always indicated in the instructions for the music center. There is also denoted by the number of channels described by the index composed of two numbers: the first means the number of broadband channels, the second is the number of low-frequency channels. Indices range from 2.0 (stereopara) to 7.1 (surround sound).

But on some columns will not leave. One of the main advantages of using the music center for playing music is its self-sufficiency - is provided by a set of essential details:

sound decoder transforming information on a carrier into sound;
sound processor - analogue of a sound card in a computer;
equalizer that allows you to customize sound - level frequencies.

Connecting speakers

The columns are connected to the music center with a standard, very simple, method - by acoustic wires with terminals. It is worth looking carefully rear panel Sound source in the music center.

You can find the following connectors on it:

to connect an AC cable;
to connect a subwoofer;
socket for FM antenna;
screws for connecting terminals - plus and minus.

The same screws or clamps can be detected on columns. Everything is simple - connect the wires with the terminals, observing the polarity, and the music will play. Thanks to the universality of the compounds, you can easily replace the columns from the kit by any other suitable by parameters. The output resistance in OM is indicated next to the screws for terminals, it must correspond to the resistance of the speakers used.

Sometimes you can also find RCA connectors signed as "Line In" or "Input" - they are intended for administration sound information to the music center. For example, to record sound or karaoke.