What to do if Cydia crashes? Cydia applications do not appear

Last week. Jailbreak works quite well, although, as always, it did not cost without any problems.

Some users complain that they cannot run Cydia after a successful jailbreak device through Pangu. Cydia does not open or immediately stink, and it is impossible to work with it and install tweaks.

If you encountered this, try repeating the following steps to disappear:

Comment. Be patient because you need to roll back the device to factory settings and restore it from iTunes-back.

• If you are configured to encrypt backups, disable this setting and make a complete unencrypted backup of your device via iTunes.

• Place the device in DFU mod.
  • Connect it to the computer.
  • Turn off the device by closing the POWER button and swipe on the slide.
  • Hold Power for 3 seconds.
  • I do not leave POWER, and HOME is also 10 seconds.
  • Release POWER, continuing to keep Home until pop-up from iTunes, notifying about the entrance to the recovery mode.

• iTunes will tell you that the device in recovery mode. Press Restore iPhone ...To launch the recovery process to iOS 9.0.2.

• When the process starts, select the device recovery option as a new one. Until you use a backup.

• Download last version Pangu from here.

• Make a jailbreak device using Pangu.

• This is a very important step. Before starting Cydia, make sure that the "Air Watch" is disabled and that your iOS-device is connected to the Internet.

• Run Cydia and let it fully boot. Do not click on Home. When Cydia is loaded, the device will automatically restart.

• Now log in to the device in iTunes and restore backup.

Everything. Now Cydia should work without errors.

Cydia crash after tweak installation

There are messages about problems with Cydia after the tweak installation. If you can not open Cydia after you have installed some tweak, try the trick with the volume key. Namely:

• Press and hold Pressing POWER until the shutdown slider appears.
• Swipe on the slide to turn off the device.
• Now press and hold the volume key.
• Run the device by pressing POWER.

As a result, all substrate tweaks cut off, including the one because of which the problem arose, and Cydia should start normally. Remove the problem tweak (or recently installed tweaks) to avoid repetition of the error. After the tweak is removed, do not forget to restart your device so that you can use tweaks again.

Do not miss Apple news - subscribe to our Telegram channel, as well as on YouTube Channel.

If you refer yourself to the jailbreak community and prefer standard opportunities iOS Twigs from Cydia, then you probably know about the release of a new application for jailbreaking IOS. 9.2 — 9.3.3 From the Pangu team. However, this exploit is somewhat different from the previous ones.

All previously produced hackers of various generations tools for jailbreak were conditionally divided into two categories - tied and disdicted. The first required the connection of the device to the computer and the re-procedure of the jailbreak after each reboot, and the seconds allowed to hack the system once and for all. The new version of Pangu for iOS 9.2 - iOS 9.3.3 is a kind of hybrid - a jailbreak must be activated after the responding iPhone or iPad (otherwise Cydia will "fly out"), but this can be done without using a PC.

Update!

IN this moment Apple has blocked the ability to install Pangu application via Safari browser, canceling the appropriate corporate certificate. The Totoa command does not advise users to restart the devices and promises to solve the problem. Those who already produced jailbreak iOS 9.2 -9.3.3 Through Safari, we recommend producing a jailbreak procedure through the device connection to Windows-PC software.

If Cydia crashes after iOS 9.2 jailbreak - iOS 9.3.3, do the following

Video instruction:

1 . Run Pangu application from the desktop of the iDevice;

2 . Allow it to send notifications (if such a request appears);

3. Tap the circle in the center of the screen.

5 . Wait for text appearance (in Chinese) and lock the gadget (press once) by the "Power" button;

4 . Ignore incoming notifications. Just expect about 30 seconds;

5 . After automatic reboot Devices (often they occur at once again with an interval of 10-15 seconds) Cydia will again work correctly.

Probably tolerate this inconvenience will have to go up to the exit, work on the jailbreak of which, according to the Pangu team, is in full swing.

Allowing jailbreak for apple devices With iOS 9. The utility called Pangu9 made his debut after four months from the moment the company made iOS 9 affordable for developers. As in the case of "jailbreaks" under previous iOS, it took the authors to find a vulnerability in the new Apple software platform.

Gray button "Start"

It is not even a mistake. Pangu does not allow to begin the exercise of the hacking of the gadget. In this case, the recommendation is this: Disconnect from computer iPhone or iPad, install the last version of iTunes., Connect the device to the PC and repeat the jailbreak. You can download the latest iTunes edition by this link.

Message "Installed iOS Public Beta Profile"

The message "Installed iOS Public Beta Profile" means that Apple profiles set as part of beta tests were detected on the device. operating systems. Go to Main Devices Settings and remove the installed profiles. After that, repeat the iOS 9 jailbreak.

Cydia does not appear

If iOS 9 jailbreak passed without errors, but on home screen The devices did not appear the Cydia icon, you should not panic. Tip simple: Launch native Application Photo in iOS before opening a new Pangu application. Now close the photo, run the Pangu application and allow access to photos. After that, the Cydia icon will appear on the home screen.

Cydia does not start

It seemed, everything is in order: there are no mistakes, and Cydia in place. But when trying to open a store, the application is emergency closed. In this case, the only solution is to reset the device to factory settings from the Settings menu -\u003e Main -\u003e Reset -\u003e Erase Content and Settings. After that, it is necessary to produce "clean" installation IOS. 9.0.2. Before you start, do not forget to make backup All data on the device.

There are no tweak settings

Currently, the Jailbreak Tweak PreferenceLoader, which is responsible for the configuration of tweaks in the settings is not updated for iOS support 9. This means that options for many tweaks cannot appear in standard Annex Settings. For this reason, many superstructures do not work in iOS 9. This problems cannot be solved in any way, it remains to wait new version PreferenceLoader. The developer is already preparing an update.

For unlocked jailbreak IOS 9, it was not devoid of errors. In the process of hacking your device, some users managed to stumble upon the bugs: someone did not fulfill all the requirements before the start of hacking, someone was simply not lucky. In this article we will tell about the most common problems and errors in iOS 9.

After the jailbreak did not appear Cydia

It also happens that after the successful hacking of the iOS 9, the Cydia cherished icon never appeared on the home screen. In this case, open the photo application on your iOS device, then the Pangu application and allow access to photos. After performing these simple stepsYou will see Cydia icon on Springboard.

Cydia crashes and does not start

Cydia shop icon appeared, but the store does not start. Only one method will help - reset all settings. First make a backup of all data. After that, go to the Setup application - the main - reset - erase the content and settings. Next clean installation iOS 9.0.2.

Tweaks did not appear in the settings

In this case, it is necessary to wait for the new version of the Tweeper PreferenceLoader, which has not yet received compatibility with iOS 9. It is he who is responsible for the configuration of tweaks in the settings.