How to make WI-FI at home

In the modern world there are practically no people left who do not know what the Internet is. Most often, apartments have a wired modem that is directly connected to the computer. But what if you have not one computer in your apartment, but several, but you want to make sure that they connect to the Internet at the same time? To solve this issue, you should figure out how to make WI-FI at home. To create this type of wireless network, you will need to purchase a special device called a router, or router.

In what cases is it necessary to create a wireless network at home?

1) If you have just made repairs, then your plans do not include breaking down walls and laying cables.

2) You need to know how to create WI-FI if you live in a large house and want to connect many different devices: laptops, computers, phones and tablets.

3) You like to lie on the couch with your laptop rather than sit at a laptop computer.

Disadvantages of Wireless Networks

1) All wireless networks are very sensitive to interference.

2) The connection speed fluctuates very often.

3) The connection is broken.

How to make WI-FI at home - connecting a router

We unpack the purchased router and connect it to the network. We connect a network cable to the “Internet” port. Now we take a laptop or personal computer and start installing a wireless network. You can also turn on the wireless adapter and then wait for the automatic installation to start. The majority of manufacturers set the network identifier to “default”, so among the entire list of networks we are interested in this particular one. When examining the question of how to make WI-FI at home, one cannot fail to mention one very interesting point. If you found several networks with the "default" identifier and were able to connect to them, then congratulations! The fact is that one of your neighbors did not set a password, and you can use their Internet for free. After setting up the network, be sure to check the signal level at each point in the apartment. To do this, take your laptop and walk around the apartment. Figure out where the signal is received poorly and where it is good. To achieve a more or less uniform WI-FI signal, you need to place the router in the middle of your apartment. If you want the signal to be better in a certain room, then point the router there.

How to make WI-FI at home - setting up a router

Before setting up your router, consider whether you have the strength to do the entire procedure yourself. If you doubt this, call a specialist. So, let's begin. Open any program that provides Internet access. In the address bar we write the following numbers: 192.168.0.1. This page is the main page of the router. Next, we take the instructions that came with the router and set up the connection. The easiest way is to go to the router settings and click “Manual connection setup”. Now you should register the identifiers of your computer, which you need to check with your provider or look in local connections, and everything will work! Congratulations, you have now figured out how to make WI-FY at home! Find the hotspot from your devices and enjoy your wireless connection!

How to make WI-FI at home - guide