Problem with Modem Detection

This unpleasant situation is familiar to many Internet users who use modems from cellular operators to access the worldwide network. Your computer does not want to see the device and rest or fruitful work are under threat. But you should not panic and rush to the repair shop or in the electronics store. It is better to try to independently identify the cause of the fault and try to eliminate it. So you can take the usual jower to detect the modem?

The reasons are the fact that the computer or laptop does not detect the modem, several. For example, the USB port failure, old drivers, viruses, and so on. And if in the case of a hardware fault, you can do a little, then with a programming program, any user is completely able to eliminate annoying troubles and get on the Internet. Let's consistently pass several steps to restore the normal modem operation.

Step 1: Indication Check

Almost all modems are equipped with a light indicator on the housing. Look, does he burn? It is possible that at the place of your finding it is probably there is no reliable covering of the cellular network and therefore the modem does not work correctly and does not perform its main function. Move to another locality point and the problem will solve itself, the device will detect a steady signal from the provider's base station and Internet access will appear.

Step 2: Verification USB Connector

Connecting a modem to a computer is usually carried out via USB port, so it is logical to assume that this connector is faulty on your PC. Try to insert the device to another similar port. If USB extension is used, then with the same cable, change it. Do not use connector modem on the front panel of the system unit housing, as this leads to the loss of power and the forces of the received signal.

Step 3: Driver Update

There is a chance that the drivers of your USB modem are hopelessly outdated and they should be updated urgently. To see the condition of the device go to "Device Manager" on PC. For example, take a computer with Windows 8 on board, in the other Operations from Microsoft, the action algorithm will look like.

Step 4: Updating Equipment Configuration

Sometimes it happens that the operating system incorrectly recognizes some devices and an equipment configuration update can help here. By analogy with step 3 open "Device Manager" And run the process by pressing the corresponding icon on the top toolbar. Did not help? Then go on.

Step 5: Operating System Update

Microsoft often produces important updates for Windows and lays them out to download to their servers. Try to set them in a timely manner, because new devices can function incorrectly without fresh packages and not even determine the system. Therefore, do not disconnect the automatic update of the OS and maintain the software up to date.