How to distribute Wi-Fi without a router

To create a Wi-Fi access point (it is a mobile hotspout), it is not necessary to use the router. Apply for this purpose any modern devices are smartphones, tablets. Even with a laptop, if it is originally equipped with a Wi-Fi adapter, it turns out to distribute the Internet. For PC, you will need to purchase a separate adapter. Mobile devices can work in modem mode only through traffic from the cellular operator, to connect an Ethernet cable to them will not work.

Each operating system (and its version) has its own characteristics of how to make an access point. But in most cases, the hotspot configuration does not take much time, will not require specific skills and a programmer's diploma.

From Mobile Device.

You can turn your phone to the Wi-Fi access point without any voltage. Most modern mobile gadgets (smartphones, tablets) are capable of it. You can distribute Wai Fi from the phone both through the Android platform and with the latest versions of the Apple Apple IOS.

Connect to the mobile access point will be a variety of gadgets: the rest of the phones, tablets, Internet devices of things, laptops. But keep in mind that the distribution of the Internet quickly discharges the battery of the smartphone. Therefore, it is recommended to turn it into an access point in the presence of a Powerbank or an accessible outlet nearby.

Do not forget about the spent traffic. Previously check its presence under the conditions of the tariff plan on which you are serviced. Used android and iOS - WPA2.

10 signs that angel visited you

What are the most regretting people at the end of life

Ten habits that make people chronically unhappy

Android

For a Wi-Fi access point, you will need to go through the following steps:

1. Open the settings section.
2. Find the Modem Mode (still under the "More" section in the Mobile Internet Information and Settings section).
3. In the "Access Point Wi-Fi" section, move the switch to the active.

In the same section, it turns out to track the number of devices, block certain devices, change the password or set a new network name. Connect with a reasonably possible up to 5 devices.

iPhone.

The possibility of transforming the iPhone to the access point appeared in the IOS 4.3 operating system version. You can also connect any wireless devices to iPhone. But consider that using a personal access point may not be freePreviously specify this moment at the cellular operator.

To transform the iPhone to the access point, you will need:

1. Go to "Settings".
2. Go to the next way: "Main" -\u003e "Networks".
3. Find the "Personal Access Point" item, click on it, then on the Wi-Fi Password.
4. Set access code at least eight characters (letters, numbers, punctuation signs).
5. Activate the distribution of Wi Fi through the switch in the menu.

The name of the resulting point will be the same as the total name of your iPhone. The password also gets to change the new, if such a need arises.

Habits that make you happy

15 shocking plastic operations that ended in deplorable

What is a tiny pocket on jeans?

With PC and Laptop

Distribute Wi-Fi from a computer or allows your Windows operating system. But all the settings depend on the immediate version of the system with which you are working.

Windows 10.

The easiest way to connect with the latest version of the operating system, Windows 10, for this:

• Open the parameters using the Windows + I key combination.
• Click on the "Network and Internet" tab (third right).
• Find the Mobile Hotspot tab in the section menu.
• Activate the switch.

All information about hot spot is provided in this section of the parameter menu. This is the name of the network, password, the ability to remotely activate the hotspot through a Bluetooth device previously attached.

Windows 8.

Setting up Hotspot to the "eight" - the task is not the simplest. The ability to make a distribution with this operating system is, but there are a lot of subtleties. The switch activating the mobile hot spot appeared only in the tenth version of the system. And it became one of the most useful functions.

Sequence of setting and creating a point:

1. Open the "Run" window (Win + R command).
2. Enter the NCPA.CPL command in the text field, click OK.
3. In the network connections window that appears, right-click on wireless networks, select "Properties" in the dropped menu.
4. In the second tab, check the box at the first paragraph. This will allow other devices to connect to the future network.
5. Start the command line with administrator rights (through the "Start" button).
6. To enter the Netsh WLAN Set HostedNetwork Mode \u003d Allow SSID \u003d "» »Key \u003d» », where SSID network identifier, and Password is an access code for connecting. Press ENTER. Set the values \u200b\u200bof the identifier and access code, set any of the command, pre-installed.
7. Sign Netsh Wlan Start HostedNetwork. The first introduction with additional values \u200b\u200bsimply creates a point, a re-command is entered for the start, without this data, where the start instead will be Start.

Checking information on the connection is also via the command line. Other ways to distribute from a computer or laptop with Windows 8, without attracting programs from other developers, no.

Windows 7.

From the laptop or PC with the Windows 7 operating system, the Wi-Fi operate will also work out, such an opportunity is integrated by creating a wireless decentralized AD-HOC connection. This is a direct network between devices, the essence of which is very simple. But the method only works with a direct connection of an Ethernet cable to a PC or laptop.

Setup:

1. Open the Start menu, find the "Wireless" item.
2. Add aD-hoc network by clicking on the appropriate button.
3. Check in the connection settings (right mouse button -\u003e properties) The ability to connect to the network by other devices.

Distribution is configured in Windows 7 much easier than in the eighth version of the system. But when connected, any previous connections with a Wi-Fi adapter that you used are broken.