How to distribute Wai Fi from a laptop on Windows 10: Instruction

Way Fi from Laptop Windows 10 is much easier than it seems and we will tell about all ways to distribute WiFi on Windows 10!

Many users of the Windows operating system do not know that the creation of an access point with wireless Internet is possible without the help of third-party programs. Standard OS tools allow users if the computer has an appropriate module.

Internet distribution via OS

This option implies the use of only the built-in functional system, but it is not suitable for all and part of the users will seem sufficiently difficult. To distribute Wai Fi from a computer to Windows 10, you need to perform the following actions:

• make sure the computer is connected to the computer;
• take a Wi-Fi adapter from the manufacturer and install the driver on it;
• on behalf of the administrator, run the command line;

• put the following command in it: Netsh WLAN Set HostedNetwork Mode \u003d ALLOW SSID \u003d »HELP-WIFI.COM» Key \u003d "11111111" Keyusage \u003d Persistent and press ENTER (in quotes indicate the login and password, respectively;

• after creating the network, it must be launched. Enter the words of the Netsh Wlan Start HostedNetwork team. After that, from a Windows 10 computer, Wi-Fi distribution will begin;

• to disable the network, write on the Netsh WLAN Stop HostedNetwork command prompt.

If the device for which you distribute the Internet does not see the network you just need, you must do the following:

• open the network management center;

• next, go to the "Changing Adapter parameter" tab;

• click on the wireless adapter with the right mouse button and go to the properties;

• in the "Access" tab, place a check mark on the point with access permission to other users and save the changes.

After that, restart the network presented above teams.

Program for distribution Wi-Fi on Windows 10: What to choose?

One of the most convenient utilities on the distribution of Wai Fay is Switch Virtual Router. You can download it free of charge free access on the official website of the developers. To start distribution, do the following:

• run the program;
• click on the settings button in the form of a gear (the right lower angle of the window);
• specify the name of the network and password for the future access point;
• apply the changes and close the settings window;
• in the main window, click the Start button.

Ready! The virtual network is running. In the window you will see the IP of your Access point.

All such utilities work according to a similar principle. Differences are only in the program and interface language.

Problems with driver

If both ways you cannot distribute the Internet, then it is worth checking the availability and relevance of the installed driver. To do this, open the device manager, click on the Wi-Fi adapter on the right mouse button and update the driver properties.

You can also check the driver for distributing WiFi on Windows 10 through the command line, enclosing Netsh Wlan Show Drivers.

If you see the word "no", then the word "no", then you need to do the driver.

Download the desired installer from the manufacturer's site of your laptop, or set the software from the disk attached to the computer when you purchase it.

How to distribute Wai Fi from a tablet on windows 10?

Distribution of the Internet through a tablet on Windows is no different from the described methods for a non-tutor, since the versions of operating systems are completely identical.