Windows 8 error: WiFi is limited

It is no secret that most network users prefer to connect to the Internet via a Wi-Fi distributor. Well, when no problems arise. And what to do in the case when the system shows an error? As you know, options in this situation can be at least two: contact the service center or try to correct the error yourself. We will consider the case when the computer with the Windows 8 system when connected writes "limited".

Clarify the cause of the problem

It happens, users complain that initially there were no problems with connecting via Wi-Fi. However, after time, the Internet disappears, and the status appears near the wireless network icon. Why does this happen?

The reasons can be quite a lot, from problems associated with the router, to problems in the system itself. To begin with, make sure that the Wi-Fi distributor is turned on. See how it interacts with other devices. If, for example, the smartphone connects to the network without problems, and an error occurs on a laptop, then, most likely, it is associated with.

Correction of connection settings

Alternatively, problems can occur due to failure in the settings. In this case, open the network management center. Here you need to select a change in the adapter parameters. It is located on the left side of the screen.

Here we find a network connection that interests us. In its menu, click the condition and go to the information. Often the wrong settings can be detected here. You can edit parameters in the same section, for what you need to go to properties. More details about setting up the Internet connection you will learn from this.

Other error correction options

So, if the above you did not help correct the error, that is, a few more workers' tips that can be used. The problem may consist in antivirus. Especially often sinning by Dr.Web. The program can block access to the network for any, understandable only by it, reason. Try to disable all the protection modules and re-connect to the network. Of course, without antivirus to enter the Internet is extremely recommended, so consider the installation option of another antiviral program. Detailed description of all types of antiviruses.

Correct the "Connection Limit" error can be enabled by activating the FIPS compatibility mode. To do this, go to network connections and choose the one that interests us. Click on it with the right mouse, in the context menu, select the state. Go to the connection properties. Next, click additional parameters. Now select the desired mode and finish the action by the OK button.

Oddly, it is possible to get rid of the restriction in the connection, you can reinstall the time, region and dates in the Wi-Fi-router parameters. To do this, go to the Wireless tab, directly where the wireless connection is configured. Select the desired region, save the changes and reboot the device. Time and date is corrected in System Tools. In this section, other system settings are usually located.

So, there are several reasons why the connection error appears "limited". In Windows 8, it is corrected by various means, depending on why it appeared. Do not forget about the installation of updated drivers on the router, which is one of the frequent causes of the error. If all the above actions did not bring any result, you will have to refer to specialists. However, before doing this, remember that after changes in the router or system settings, restart the device, otherwise they will not be activated.